Quantitative analysis of cationic poly(vinyl alcohol) diffusion into the hairy structure of cellulose fiber pores: charge density effect

The diffusion of charged polymers into the pores of cellulose fibers has not yet been fully understood due to the complexity of the interaction between polymers and fibers. In this paper, the diffusion of cationic-modified poly(vinyl alcohol) (CPVA) with tailored charge densities and a relatively high molecular weight into the pores of bleached aspen high-yield pulp (via a chemi-thermomechanical pulping process) was quantitatively investigated via an adsorption analysis, charge density analysis, and solute exclusion technique (SET). The results showed that the adsorption of the low-charged CPVA was substantially higher than that of the high-charged CPVA on fibers. The surface charge density analysis confirmed that approximately 17 mg/g of the high-charged CPVA adsorbed on the outer surface and on the macropores of fibers and the remaining (23 mg/g) diffused into the pores. The SET analysis confirmed that the pore size of fibers was more significantly reduced by applying the low-charged CPVA than the high-charged one. The influencing factors for the diffusion of CPVA into the large and small pores were related to the repulsion force developed between the adsorbed polymers and approaching polymers, entropy increase, and the polymer flexibility. The Brunauer-Emmett-Teller surface area analysis showed an increase in the surface area of fibers upon CPVA adsorption. It was proposed that the diffused CPVA prevented complete fiber pore collapse during drying, which eventually increased the surface area of fibers.     

Effects of ionic strength and surface charge on protein adsorption at PEGylated surfaces

PEGylated Nb2O5 surfaces were obtained by the adsorption of poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) copolymers, allowing control of the PEG surface density, as well as the surface charge. PEG (MW 2 kDa) surface densities between 0 and 0.5 nm(-2) were obtained by changing the PEG to lysine-mer ratio in the PLL-g-PEG polymer, resulting in net positive, negative and neutral surfaces. Colloid probe atomic force microscopy (AFM) was used to characterize the interfacial forces associated with the different surfaces. The AFM force analysis revealed interplay between electrical double layer and steric interactions, thus providing information on the surface charge and on the PEG layer thickness as a function of copolymer architecture. Adsorption of the model proteins lysozyme, alpha-lactalbumin, and myoglobin onto the various PEGylated surfaces was performed to investigate the effect of protein charge. In addition, adsorption experiments were performed over a range of ionic strengths, to study the role of electrostatic forces between surface charges and proteins acting through the PEG layer. The adsorbed mass of protein, measured by optical waveguide lightmode spectroscopy (OWLS), was shown to depend on a combination of surface charge, protein charge, PEG thickness, and grafting density. At high grafting density and high ionic strength, the steric barrier properties of PEG determine the net interfacial force. At low ionic strength, however, the electrical double layer thickness exceeds the thickness of the PEG layer, and surface charges "shining through" the PEG layer contribute to protein interactions with PLL-g-PEG coated surfaces. The combination of AFM surface force measurements and protein adsorption experiments provides insights into the interfacial forces associated with various PEGylated surfaces and the mechanisms of protein resistance.     

Qualitative characterization of the diffusion of cationic-modified PVA into the cellulose fiber pores

In this work, the diffusion of cationic poly (vinyl alcohol) (CPVA) with well-defined structures into the pores of bleached kraft fibers was investigated at equilibrium level of adsorption by means of adsorption, solute exclusion technique (SET), and nuclear magnetic resonance (NMR) relaxation method. The results showed that the interaction between CPVA and dextran polymers was weak, which allowed us to use the SET method to investigate the variation in the pore size of fibers upon diffusing CPVAs. Both adsorption and SET methods confirmed the diffusion of CPVA polymers into the fiber pores. However, the NMR technique was unable to reflect the pore size changes. The main reason for such results was probably the error that occurred in removing water between fibers via applying the water retention value (WRV) test prior to the NMR analysis. In fact, not all of the water on the fiber surface, especially on the surface of CPVA-modified fibers, could be removed by the WRV, introducing some error in the NMR analysis.     

Surface heterogeneity of polystyrene latex particles determined by dynamic force microscopy

Atomic force microscopy (AFM) was employed to characterize the surface chemistry distribution on individual polystyrene latex particles. The particles were obtained by surfactant-free emulsion polymerization and contained hydrophilic quaternary ammonium chloride, sodium sulfonate, or hydroxyethyl groups. The phase shift in dynamic force mode AFM is sensitive to charge/chemical interactions between an oscillating atomic force microscope tip and a sample surface. In this work, the phase imaging technique distinguished phase domains of 50-100 nm on the surfaces of dried latex particles in ambient air. The domains are attributed to the separation of ion-rich and ion-poor components of the polymer on the particle surface.     

Structure and nanomechanical characterization of electrospun PS/clay nanocomposite fibers

Electrospinning has been emerging as one of the most efficient methods to fabricate polymer nanofibers. In this paper, PS/clay nanocomposite fibers with varying diameters were electrospun onto solid substrates. The fiber diameters were adjusted from 4 microm to 150 nm by changing the solution concentration. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) were used to characterize the fiber morphology. Shear modulation force microscopy (SMFM) was utilized to investigate the surface nanomechanical properties of electrospun fibers as a function of the fiber diameter and temperature. In the absence of clay, no change in T(g) was observed, even though a large increase of shear modulus below the glass transition temperature was found. This effect was postulated to result from the molecular chain alignment during electrospinning. The addition of functionalized clays to the spinning solution produced fibers with a highly aligned montmorillonite layer structure at a clay concentration of 4 wt %. Clay agglomerates were observed at higher concentrations. The existence of clay further enhanced the shear modulus of fibers and increased the glass transition temperature by nearly 20 degrees C.     

Synthesis of a novel antimicrobial-modified starch and its adsorption on cellulose fibers: part II––adsorption behaviors of cationic starch on cellulose fibers

The adsorption of guanidine polymer modified starches on cellulose fibers was investigated along with the systematic studies on various influencing factors including temperature, pH, ionic strength and charge density of the starches. The AFM results revealed the relationship between the adhesion force and adsorption capacity. The adsorption capacity is not necessarily proportional to the adhesion force. The conditions for achieving the maximum adsorption were: temperature, 40 °C; pH, 6; C_NaCl, 0 mM and charge density, 0.4 meq/g. The corresponding the normalized adhesion force is approximate 1 mN/m. In terms of the surface roughness determined by AFM, it has been proved that adsorbed starches of high charge density tend to form train structure, whereas those of low charge density tend to form tails and loops. Due the comb molecular structure, the adsorption capacity of the novel cationic starch reaches 124.3 mg/g, which is much greater than those reported previously.     

Surface modification of cellulose fibers with layer-by-layer self-assembly of lignosulfonate and polyelectrolyte: effects on fibers wetting properties and paper strength

To convert the hydrophilic cellulose fiber into hydrophobic, multilayers composed of cationic polyacrylamide (CPAM) and lignosulfonate (LS) were constructed on cellulose fiber surface using layer-by-layer (LBL) self-assembly technique. The presence of CPAM/LS multilayers were validated by zeta potential, X-ray photoelectron spectroscopy and atomic force microscopy (AFM). It was found that potential of fiber surface inversed after deposition of each layer, the contents of characteristic elements (i.e. S and N) of CPAM/LS multilayers increased with increasing bilayer number, furthermore, the calculated surface LS content increased linearly as a function of bilayers. AFM phase images indicated that the cellulose microfibrils on fiber surface were gradually covered by LS granules, resulting in an increase in fiber surface roughness as self-assembly proceeded. The wetting properties of modified cellulose fibers were detected by dynamic contact angle measurement. The results showed that the initial water contact angle gradually increased and the attenuation rate of the contact angle gradually decreased with the number of bilayers, suggesting that the controllable hydrophobicity of cellulose fiber can be achieved depending on the number of bilayers. It also showed that the polyelectrolyte presented in the outermost layer significantly influenced the wetting properties of cellulose fibers, and a higher hydrophobicity was observed when LS was in the outermost layer. Moreover, tensile strength test was performed on the handsheet prepared from LBL modified fibers to evaluate the effect of CPAM/LS multilayers on strength property of cellulose fiber networks. The tensile index of handsheet prepared from fibers modified with a (CPAM/LS)₅ multilayer increased by 12.4% compared with that of handsheet prepared from original fibers. The print density of handsheet increased with the number of bilayers, suggesting that printability of the handsheet was improved by constructing CPAM/LS multilayers on cellulose fiber surface. This strategy will have a positive impact and potential application value in printing process control of cellulose fiber-based products.     

烯碳材料改性有机高性能纤维：制备、性能及应用

有机高性能纤维是全球化纤工业的重要发展方向之一。提升现有纤维力学性能的同时研发新型结构功能一体化的纤维对提升我国在航天航空等领域的国际地位具有重要意义。以石墨烯和碳纳米管为代表的烯碳材料具备优异的力、电、热学等性能,可用于改性传统有机高性能纤维。通过制备不同物化性质的烯碳材料并设计合理的改性方式,可将烯碳材料优异的性能传递到传统纤维中,形成具备更高力、电、热学等性能的烯碳材料改性有机高性能纤维。本文首先综述了烯碳材料改性有机高性能纤维的制备方式,包括烯碳材料的分散与功能化、烯碳材料对有机高性能纤维的改性方法,阐述了烯碳材料改性有机高性能纤维的力、电、热学等性能以及烯碳材料的增强机理,进而总结了烯碳材料改性有机高性能纤维的应用,并对其现存的挑战和未来的发展做出展望。     

Grafting of acrylamide onto cellulosic fibers via dielectric-barrier discharge

Fully bleached kraft pulp (BKP) and thermomechanical pulp (TMP) fibers were grafted with acrylamide via dielectric-barrier discharge treatment at various treatment dosages. The results indicate that increased dielectric-barrier discharge treatment leads to the increased polymerization and incorporation of acrylamide onto fiber surfaces. Greater incorporation of poly(acrylamide) occurs on the BKP fibers than the TMP at the same treatment conditions. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and scanning electron microscopy (SEM) indicate that dielectric-barrier discharge initiated modifications to fiber surface topo-chemistry occur across the fiber such that the sheet is randomly peppered with modified areas; however, it occurs in patches on individual fibers as opposed to occurring as an evenly distributed thin film. SEM and elemental analysis also showed that the incorporation of acrylamide onto the fiber surface increases with increased treatment dosages.     

Mechanism of adhesion between polymer fibers at nanoscale contacts

Adhesive force exists between polymer nano/microfibers. An elaborate experiment was performed to investigate the adhesion between polymer nano/microfibers using a nanoforce tensile tester. Electrospun polycaprolactone (PCL) fibers with diameters ranging from 0.4-2.2 μm were studied. The response of surface property of electrospun fiber to the environmental conditions was tracked by FTIR and atomic force microscopy (AFM) measurements. The effect of temperature on molecular orientation was examined by wide angle X-ray diffraction (WAXD). The adhesive force was found to increase with temperature and pull-off speed but insensitive to the change of relative humidity, and the abrupt increase of adhesion energy with temperature accompanied by a reduced molecular orientation in the amorphous part of fiber was observed. Results show that adhesion is mainly driven by van der Waals interactions between interdiffusion chain segments across the interface.     

Surface characteristic of poly(p‐phenylene terephthalamide) fibers with oxygen plasma treatment

Oxygen plasma is widely employed for modification of polymer surfaces. Plasma treatment process is a convenient procedure that is also environmentally friendly. This study reports the effects of oxygen plasma treatment on the surface properties of poly(p‐phenylene terephthalamide) (PPTA) fibers. The surface characteristics before and after oxygen plasma treatment were analyzed by XPS, atomic force microscopy (AFM) and dynamic contact angle analysis (DCAA). It was found that oxygen plasma treatment introduced some new polar groups (O? C?O) on the fiber surface, increased the fiber surface roughness and changed the surface morphologies obviously by plasma etching and oxidative reactions. It is also shown that the fiber surface wettability was improved significantly by oxygen plasma treatment. Copyright © 2008 John Wiley & Sons, Ltd.     

Aspects of the physical chemistry of polymers, biomaterials and mineralised tissues investigated with atomic force microscopy (AFM)

Beyond being merely a tool for measuring surface topography, atomic force microscopy (AFM) has made significant contributions to various scientific areas dealing with physical chemistry processes. This paper presents aspects of the physical chemistry at surfaces and interfaces of polymers, biomaterials and tissues investigated with AFM. Selected examples presented include surface induced self-assembly of polymer blends, copolymer interfacial reinforcement of immiscible homopolymers, protein adsorption on biomaterials and erosion of mineralised human tissues. In these areas, AFM is a useful and versatile tool to study structural or dynamic sample properties including thermodynamically driven surface evolution of polymer surfaces, lateral surface composition of interfaces, adsorption processes, and the metrology of demineralisation phenomena.     

Interaction forces between silica surfaces in aqueous solutions of cationic polymeric flocculants: effect of polymer charge

Three cationic polymers with molecular weights and charge density of 3.0 x 10(5) g/mol and 10% (D 6010), 1.1 x 10(5) g/mol and 40% (D6040), and 1.2 x 10(5) g/mol and 100% (D6099) were investigated in aqueous NaCl solutions in the presence of silica. The atomic force microscope (AFM) colloidal probe technique was used to determine silica interparticle interaction forces, which were compared to macroscopic information on the strength of interactions such as compressive yield stress measurements. It was found that in 30 mM NaCl solution the 10% charged polymer produced steric repulsion upon approach and long-range adhesion with multiple pull off events upon retraction at the optimum flocculation concentration. This suggests that the polymer was adsorbed in a conformation where segments extend from the surface, resulting in bridging flocculation. The 40 and 100% charged polymers produced attraction upon approach and strong adhesion with snap out from contact upon separation at optimum polymer dosages. This suggests that these polymers are adsorbed with flat conformations and is typical of charge neutralization or patch attraction. The attractions for 40 and 100% charged polymers measured with the AFM are significantly larger than for the 10% charged polymer. The polymer dose that produced the optimum flocculation and the maximum compressive yield stress typically corresponded to the polymer concentration that produced the maximum adhesion for each polymer. It was found that the magnitude of the adhesive force was more significant in determining the compressive yield stresses of the silica particle sediments than the aggregate size and structure.     

Measurement of size‐dependent glass transition temperature in electrospun polymer fibers using AFM nanomechanical testing

The glass transition temperature (T_g) of individual electrospun polymer polyvinyl alcohol fibers of varying diameter was measured using atomic force microscopy (AFM) based nanomechanical thermal analysis. Indentation and bending of individual electrospun fibers using AFM allowed the calculation of the elastic modulus of the polyvinyl alcohol (PVA) fibers across a range of different temperatures. The elastic modulus of electrospun PVA fibers was observed to decrease significantly when passing through T_g, which allowed accurate determination of T_g. The T_g of electrospun PVA fibers was shown to decrease for smaller fiber diameters especially for fiber diameters below 250 nm. This size‐dependent glass transition behavior of electrospun PVA fibers is indicated as being due to polymer chain confinement. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Morphology and interphase formation in epoxy/PMMA/glass fiber composites: effect of the molecular weight of the PMMA

In this work ternary composites based on an epoxy thermoset modified with a thermoplastic polymer and reinforced with glass fibers were prepared. The aim of this study is to analyze the influence of the molecular weight of the thermoplastic polymer on the final morphologies. To obtain tailor made interphases four poly(methylmethacrylate), PMMA, which differ in their molecular weight (34,000, 65,000, 76,000 and 360,000 g/mol) were chosen to modify the epoxy resin. The amount of PMMA in the composites was fixed to 5 wt.%. Neat polymer matrices (epoxy-PMMA without fibers) were also prepared for comparison. To study all systems dynamic mechanical analysis (DMA), atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used. Although all the systems showed the typical phase separation in the epoxy/PMMA blend, DMA experiments revealed a new phase with more restricted mobility when the glass fibers are present. The amount of this phase increases as molecular weight of PMMA does. The morphologies as well as the fracture surface in the immediate surroundings of the fibers were found to be different from those observed further away from the surface of the fiber, suggesting therefore that, in this case, different fracture mechanism operates. These observations allow us to conclude that an interphase with specific properties is formed. This interphase is based on a polymer or a polymer blend (epoxy-PMMA) enriched in the component with lower mobility.     

In situ estimation of the chemical and mechanical contributions in local adhesion force measurement with AFM: the specific case of polymers

The atomic force microscope (AFM) was used to perform surface force measurements in contact mode to investigate surface properties of model systems at the nanoscale. Two types of model systems were considered. The first one was composed of a rigid substrate (silicon plates) which was chemically modified by molecular self-assembling (SAMs) to display different surface properties (hydroxyl, amine, methyl and ester functional groups). The second system consists of model polymer networks (cross-linked polydimethylsiloxane or PDMS) of variable mechanical properties, whose surfaces were chemically modified with the same groups as before with silicon substrates. The comparison of the force curves obtained from the two model systems shows that the viscoelastic or mechanical contribution dominates in the adhesion on polymer substrates. Finally, a relationship, which expresses the separation energy at a local scale as a function of the energy dissipated within the contact zone, on one hand and the surface properties of the polymer on the other, was proposed.     

Measurement of polyamide and polystyrene adhesion with coated-tip atomic force microscopy

This work presents atomic force microscopy (AFM) measurements of adhesion forces between polyamides, polystyrene and AFM tips coated with the same materials. The polymers employed were polyamide 6 (PA6), PA66, PA12 and polystyrene (PS). All adhesion forces between the various unmodified or modified AFM tips and the polymer surfaces were in the range -1.5 to -8 nN. The weakest force was observed for an unmodified AFM tip with a PS surface and the strongest was between a PS-coated tip and PS surface. The results point to both the benefits and drawbacks of coated-tip AFM force-distance measurements. Adhesion forces between the two most dissimilar (PA6-PS and PA66-PS) materials were significantly asymmetric, e.g., the forces were different depending on the relative placement of each polymer on the AFM tip or substrate. Materials with similar chemistry and intermolecular interactions yielded forces in close agreement regardless of placement on tip or substrate. Using experimental forces, we calculated the contact radii via four models: Derjaguin, Muller, and Toporov; Johnson, Kendall, and Roberts; parametric tip-force-distance relation; and a square pyramid-flat surface (SPFS) model developed herein. The SPFS model gave the most reasonable contact tip radius estimate. Hamaker constants calculated from the SPFS model using this radius agreed in both magnitude and trends with experiment and Lifshitz theory.     

Gamma irradiation of electrospun poly(ε‐caprolactone) fibers affects material properties but not cell response

Fabrication of electrospun fibrous scaffolds as future medical devices is being widely researched, with particular emphasis given to their material properties and effect on cell response and differentiation. However, the vast majority of these scaffolds are sterilized via nonmedically approved methods, including submersion in ethanol and exposure to UV light. Although these techniques are adequate for laboratory‐based research, they are not sufficient for human implantation. In this case, regulatory approved, medical grade sterilization is required. In this study, we report the effects of gamma irradiation, a regulatory approved technique, on electrospun poly(ε‐caprolactone) fibers. Fabricated fibers were separately subjected to different dosages of irradiation ranging from 0 to 45 kGy and then assessed for their physicochemical properties. Gamma irradiation affected fiber properties irrespective of dosage. A dose‐dependent decrease in polymer molecular weight was observed and an increase in melting point and crystallinity reported. Similarly, irradiation had a significant effect on mechanical properties with greatest decrease in tensile strength (68%) for fibers exposed to 40 kGy. The method of sterilization had no effect on cell response. Seeded tenocytes attached to all fibers and elongated parallel to the underlying fiber direction. The results demonstrate the importance of incorporating medical grade sterilization procedures early in the research projects time line to assist translation from bench to clinic. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Mechanisms of protein oligomerization: inhibitor of functional amyloids templates α-synuclein fibrillation

Small organic molecules that inhibit functional bacterial amyloid fibers, curli, are promising new antibiotics. Here we investigated the mechanism by which the ring-fused 2-pyridone FN075 inhibits fibrillation of the curli protein CsgA. Using a variety of biophysical techniques, we found that FN075 promotes CsgA to form off-pathway, non-amyloidogenic oligomeric species. In light of the generic properties of amyloids, we tested whether FN075 would also affect the fibrillation reaction of human α-synuclein, an amyloid-forming protein involved in Parkinson's disease. Surprisingly, FN075 stimulates α-synuclein amyloid fiber formation as measured by thioflavin T emission, electron microscopy (EM), and atomic force microscopy (AFM). NMR data on (15)N-labeled α-synuclein show that upon FN075 addition, α-synuclein oligomers with 7 nm radius form in which the C-terminal 40 residues remain disordered and solvent exposed. The polypeptides in these oligomers contain β-like secondary structure, and the oligomers are detectable by AFM, EM, and size-exclusion chromatography (SEC). Taken together, FN075 triggers oligomer formation of both proteins: in the case of CsgA, the oligomers do not proceed to fibers, whereas for α-synuclein, the oligomers are poised to rapidly form fibers. We conclude that there is a fine balance between small-molecule inhibition and templation that depends on protein chemistry.     

Hydrogel characteristics of electron-beam-immobilized poly(vinylpyrrolidone) films on poly(ethylene terephthalate) supports

A novel strategy for the preparation of thin hydrogel coatings on top of polymer bulk materials was elaborated for the example of poly(ethylene terephthalate) (PET) surfaces layered with poly(vinylpyrrolidone) (PVP). PVP layers were deposited on PET foils or SiO2 surfaces (silicon wafer or glass coverslips) precoated with PET and subsequently cross-linked by electron beam treatment. The obtained films were characterized by ellipsometry, X-ray photoelectron spectroscopy, infrared spectroscopy in attenuated total reflection, atomic force microscopy (AFM), and electrokinetic measurements. Ellipsometric experiments and AFM force-distance measurements showed that the cross-linked layers swell in aqueous solutions by a factor of about 7. Electrokinetic experiments indicated a strong hydrodynamic shielding of the charge of the underlying PET layer by the hydrogel coatings and further proved that the swollen films were stable against shear stress and variation of pH. In conclusion, electron beam cross-linking ofpreadsorbed hydrophilic polymers permits a durable fixation of swellable polymer networks on polymer supports which can be adapted to materials in a wide variety of shapes.