Collisional deactivation of Ba 5d7p (3)D1 by noble gases

Collisional deactivation of the 5d7p (3)D1 state of Ba by noble gases is studied by time- and wavelength-resolved fluorescence techniques. A pulsed, frequency-doubled dye laser at 273.9 nm excites the 5d7p (3)D1 level from the ground state, and fluorescence at 364.1 and 366.6 nm from the 5d7p (3)D1 --> 6s5d (3)D1 and 5d7p (3)D1 --> 6s5d (3)D2 transitions, respectively, is monitored in real time to obtain the deactivation rate constants. At 835 K these rate constants are as follows: He, (1.69 +/- 0.08) x 10(-9) cm(3) s(-1); Ne, (3.93 +/- 0.14) x 10(-10) cm(3) s(-1); Ar, (4.53 +/- 0.15) x 10(-10) cm(3) s(-1); Kr, (4.64 +/- 0.13) x 10(-10) cm(3) s(-1); Xe, (5.59 +/- 0.22) x 10(-10) cm(3) s(-1). From time-resolved 5d7p (3)D1 emission in the absence of noble gas and from the intercepts of the quenching plots, the lifetime of this state is determined to be 100 +/- 1 ns. Using time- and wavelength-resolved Ba emission with a low background pressure of noble gas, radiative lifetimes of several near-resonant states are determined from the exponential rise of the fluorescence signals. These results are as follows: 5d6d (3)D3, 28 +/- 3 ns; 5d7p (3)P1, 46 +/- 2 ns; 5d6d (3)G3, 21.5 +/- 0.8 ns; 5d7p (3)F3, 48 +/- 1 ns. Integrated fluorescence signals are used to infer the relative rate constants for population transfer from the 5d7p (3)D1 state to eleven near-resonant fine structure states.     

Laser spectroscopic excitation function and reaction threshold studies of the H + DCl --> HCl + D gas-phase isotope exchange reaction

The dynamics of the gas-phase hydrogen atom exchange reaction H + DCl --> HCl + D were studied using the pulsed laser photolysis/laser induced fluorescence "pump-and-probe" method. Laser photolysis of H2S at 222 nm was used to generate nonequilibrium distributions of translationally excited hydrogen atoms at high dilution in a flowing moderator gas (Ar)/reagent (DCl) mixture. H and D atoms were detected with sub-Doppler resolution via Lyman-alpha laser induced fluorescence spectroscopy, which allowed the measurement of the line shapes of the moderated H atom Doppler profiles as well as the concentration of the D atoms produced in the H + DCl --> HCl + D reaction. From the measured H atom Doppler profiles, the time evolution of the initially generated nascent nonequilibrium H atom speed distribution toward its room-temperature thermal equilibrium form was determined. In this way, the excitation function and the reaction threshold (E0 = 0.65 +/- 0.13 eV) for the H + DCl --> HCl + D reaction could be determined from the measured nonequilibrium D atom formation rates and single collision absolute reaction cross-section values of 0.12 +/- 0.04 A2 and 0.45 +/- 0.11 A2 measured at reagent collision energies of 1.0 and 1.4 eV, respectively.     

Characterization of a shallow-bound 0g+ valence state of I2 using emission from the D 0u+(3P2) and F' 0u+(1D2) ion-pair states populated by amplified spontaneous emission

A range of vibrational levels of the D 0(u)(+)((3)P(2)) and F' 0(u)(+)((1)D(2)) ion-pair states of I(2) is shown to be easily generated by amplified spontaneous emission (ASE) from their more accessible partners, E 0(g)(+)((3)P(2)) and f' 0(g)(+)((1)D(2)), in sufficient concentration for dispersed fluorescence studies of the D 0(u)(+)((3)P(2)) --> 0(g)(+)(bb) and F' 0(u)(+)((1)D(2)) --> 0(g)(+)(bb) transitions to be carried out. T(0) (J = 49) of this shallow-bound 0(g)(+)(bb) valence state is unambiguously determined and an improved R(e) value of 3.952 +/- 0.005 A is obtained from optimizing the fit of the intensities of the vibrational progressions in the 0(g)(+)(bb) state, and T(e) is found to be 27311.3 +/- 2 cm(-1), leading to D(e) = 442.0 +/- 2 cm(-1).     

Kinetics of the reaction of SH and SD with NO2

The rate constants for the reactions of NO2 with SH and SD were measured between 250 and 360 K to be 2.8 x 10(-11) exp{(270+/-40)/T(K)} and 2.6x10(-11) exp{(285+/-20)/T(K)} cm3 molecule-1 s-1, respectively. SH(SD) radicals were generated by pulsed laser photolysis of H2S(D2S) or CH3SH and detected via pulsed laser-induced fluorescence. The laser-induced fluorescence excitation spectrum of SH was found to be contaminated by the presence of the SO radical. This contamination is suggested as a possible reason for differences among some of the reported values of k1 in the literature. The title reaction influences the atmospheric lifetime of the SH radical when NO2 is greater than 100 pptv, but the revised value of k1 does not significantly alter our current understanding of SH oxidation in the atmosphere.     

Reaction pathway for the nonadiabatic reaction of Ca(4s3d 1D)+H2-->CaH(X 2Sigma+)+H

The reaction pathway and the nascent CaH product distribution in the reaction Ca(4s3d (1)D)+H(2)-->CaH(X (2)Sigma(+))+H are obtained using a pump-probe technique. The Ca atom is first prepared in the 3 (1)D state by a two-photon absorption, and then in brief time delay the laser-induced fluorescence of the reaction product CaH is monitored. The CaH(v=0,1) distributions appear to be single peaked, as characterized by Boltzmann rotational temperature of 807+/-38 K (v=0) and 684+/-77 K (v=1). The vibrational population ratio of CaH(v=0)/CaH(v=1) is determined to be 3.3+/-0.1, while the v=2 population is not detectable. The fractions of the available energy partitioning into rotation, vibration, and translation are estimated to be 0.36+/-0.05, 0.28+/-0.04, and 0.36+/-0.05, respectively. With the aid of the potential energy surfaces calculations, the current reaction should favor a near C(2v) collision configuration. The temperature dependence measurement yields a positive slope, indicative of the reaction occurrence without any potential barrier. The colliding species are anticipated to follow an attractive 1B(2) (or 2A') surface and then transit nonadiabatically to the reactive ground state surface.     

Reaction dynamics of Ca(4s3d 1D2)+CH4-->CaH(X 2Sigma+)+CH3: reaction pathway and energy disposal for the CaH product

The reaction pathway for Ca(4s3d 1D2)+CH4-->CaH(X 2Sigma+)+CH3 has been investigated by using a pump-probe technique in combination with potential-energy surface (PES) calculations. The nascent product distributions of CaH have been characterized with Boltzmann rotational temperatures of 1013+/-102 and 834+/-70 K for the v=0 and 1 levels, respectively, and a Boltzmann vibrational temperature of 1313+/-173 K. The rotational and vibrational energy partitions in CaH have been estimated to be 461+/-45 and 252+/-15 cm(-1), respectively. According to the PES calculations, the pathway favors an insertion mechanism. Ca(3 1D2) approaches CH4 along an attractive potential surface in a C2v (or Cs) symmetry and then the collision complex undergoes nonadiabatic transition to the reactive ground-state surface. An Arrhenius plot shows a potential-energy requirement of 2695+/-149 cm(-1), which accounts for the endothermicity of 2930 cm(-1) for the reaction scheme. The Ca-C bond distance in the transition state structure is short enough to allow for tight orbital overlap between CaH and CH3. The strong coupling between the moieties renders the energy transfer sufficient from CaH into the CH3 radical. As compared to the Ca(4 1P1) reaction, the dissociation lifetime of the intermediate complex with less excess energy is prolonged so as to cause much less vibrational energy disposal into CaH.     

The lowest excited triplet (T1) energies of p-methoxybenzaldehyde and p-cyanobenzaldehyde vapors estimated from the temperature dependence of the T2(n,pi*) phosphorescence and the S1(n,pi*) fluorescence spectra

Invisible energy levels of the T1(pi, pi*) state of p-methoxybenzaldehyde (anisaldehyde) and p-cyanobenzaldehyde vapors have been estimated through the temperature dependence of the T2(n, pi*) --> S0 phosphorescence and the S1(n, pi*) --> S0 delayed fluorescence spectra. It is shown that the T1(pi, pi*) levels are located at 900 +/- 100 and 300 +/- 100 cm(-1) below the T2(n, pi*) levels, respectively, for p-methoxybenzaldehyde and p-cyanobenzaldehyde vapors. The estimated T1 energy levels are in good agreement with the phosphorescence origins in rigid glass at 77 K.     

Emission spectra and electronic energy levels of the rotational isomers of pyridinecarboxaldehyde vapors

Emission and excitation spectra of 2-, 3- and 4-pyridinecarboxaldehyde (2-, 3- and 4-PCA, respectively) vapors have been measured at different temperatures and compared to one another. The emission spectra of these vapors are shown to consist of the T(1)(n, pi) --> S(0) phosphorescence accompanied by the weak thermally activated S(1)(n, pi) --> S(0) delayed fluorescence. Two peaks originating from the two rotamers (syn and anti) have been identified in the fluorescence, phosphorescence and excitation spectra of 3-PCA vapor. Analyses of the temperature dependence and vibrational structure of the spectra of 3-PCA vapor provide the syn-anti energy difference of 190 +/- 30 cm(-1) in the T(1) (n, pi) state, 200 +/- 30 cm(-1) in the S(1)(n, pi) state, and 290 +/- 35 cm(-1) in the ground state. The ground-state energy difference is in agreement with the result of density functional theory (DFT) calculation for 3-PCA vapor. DFT calculation demonstrated also that the syn rotamer exists as a less stable isomer in the ground state for 2- and 3-PCA vapors.     

Fluorescence lifetimes and spectral properties of protochlorophyllide in organic solvents in relation to the respective parameters in vivo

In this work, absorption and fluorescence spectra of protochlorophyllide (Pchlide), as well as its fluorescence lifetime, were investigated in organic solvents having different physical properties. The obtained Pchlide spectral features are discussed in relation to the parameters describing solvent properties (refractive index and dielectric constant) and taking into account the specific solvent-Pchlide interaction. The correlation of Pchlide Qy and Soret absorption bands with solvent polarizability function ((n2 - 1)/(n2 + 2)) has been found; however, the dispersion of the observed points was rather high. A small Stokes shift of a magnitude between 50 and 300 cm(-1) was found, which indicates low sensitivity of Pchlide to nonspecific solvation. The fluorescence decay of Pchlide was single exponential in all the investigated solvents, with the lifetime value ranging from 5.2 ns for dioxane to 3.5 ns for methanol. Dependence of the obtained fluorescence lifetimes on the solvent orientation polarizability, a parameter being the function of both refractive index and dielectric constant, was discussed. In water-methanol mixtures, a further decrease of the fluorescence lifetime was observed, giving values of 2.9 ns for 25% methanol. Double-exponential decay of Pchlide fluorescence was found for Pchlide in a solution of 15% methanol with the lifetimes of 4.5 +/- 0.5 ns and 1.2 +/- 0.3 ns and in pure water with the lifetimes of 2.5 +/- 0.5 ns and 0.4 +/- 0.1 ns. The obtained results are discussed in relation to spectroscopic properties of Pchlide in vivo.     

Determination of the rate constants for the NCO(X2Pi) + Cl(2P) and Cl(2P) + ClNCO(X1A') reactions at 293 and 345 K

The rate constant for the reaction of the isocyanato radical, NCO(X2Pi) with chlorine atoms, Cl(2P), has been measured at 293 +/- 2 and 345 +/- 3 K to be (6.9 +/- 3.8) x 10(-11) and (4.0 +/- 2.2) x 10(-11) cm3 molecules(-1) s,(-1) respectively, where the uncertainties include both random and systematic errors. The measurements were carried out at pressures of 1.3-6.2 Torr with either Ar or CF4 as the bath gas and were independent of both pressure and nature of the third body. Equal concentrations of NCO and Cl atoms were created by 248 nm photolysis of ClNCO. The reaction was monitored by following the temporal dependence of NCO(X2Pi) using time-resolved infrared absorption spectroscopy on rotational transitions of the NCO(10(1)1) <-- (00(1)0) combination band. The reaction rate constant was determined by using a simple chemical model and minimizing the sum of the residuals between the experimental and computer generated temporal NCO concentration profiles. The reaction Cl + ClNCO --> Cl2 + NCO was found to contribute to the observed NCO. The rate constant for this reaction was found to be (2.4 +/- 1.6) x 10(-13) and (1.9 +/- 1.2) x 10(-13) cm3 molecules(-1) s,(-1) at 293 and 345 K, respectively, where the uncertainties include both random and systematic error.     

Laser-spectroscopic laboratory studies of atmospheric aqueous phase free radical chemistry

Nitrate radical (NO(3)) reactions with benzene (R-1), toluene (R-2), p-xylene (R-3), p-cresol (R-4) and mesitylene (R-5) have been studied by laser photolysis/long path laser absorption (LP-LPLA) in aqueous solution. Rate constants of k(1)=(4.0+/-0.6). 10(8), k(2)=(1.2+/-0.3). 10(9), k(3)=(1.6+/-0.1). 10(9), k(4)= (8.4+/-2.3). 10(8) and k(5)=(1.3+/-0.3). 10(9) lmol(-1)s(-1) were obtained at T=298 K. In addition, reaction rate coefficients for SO(-)(5)+Fe(2+)-->prod. (R-6) and SO(-)(5)+Mn(2+)-->prod. (R-7) of k(6)=(4.3+/-2.4). 10(7) lmol(-1)s(-1) and k(7)=(4.6+/-1.0). 10(6) lmol(-1)s(-1) (T=298 K, I-->0) have been obtained by the application of laser photolysis/UV-VIS broadband diode array spectroscopy. A new laser photolysis/UV-long path laser absorption experiment has been applied to study the reaction of the Cl(-)(2) radical anion with dissolved sulfur(IV). For the reactions Cl(-)(2)+HSO(-)(3)-->2Cl(-)+H(+)+SO(-)(3) (R-8) and Cl(-)(2)+SO(2-)(3)-->2Cl(-)+SO(-)(3) (R-9) rate coefficients of k(8)=(1.7+/-0.2). 10(8) lmol(-1)s(-1) (T=298 K, I-->0) and of k(9)=(6.2+/-0.3). 10(7) lmol(-1)s(-1) (T=279 K, I-->0) were obtained.     

Effect of vibrational excitation on the collisional removal of free radicals by atoms: OH(upsilon=1) + N

The collisional removal of vibrationally excited OH(upsilon=1) by N(4S) atoms is investigated. The OH radical was prepared by 193 nm photolysis of H2O2, and N(4S) atoms were generated by a microwave discharge in N2 diluted in argon. The concentrations of OH(upsilon=0 and 1) were monitored by laser-induced fluorescence as a function of the time after the photolysis laser pulse. The N(4S) concentration was determined from the OH(upsilon=0) decay rate, using the known rate constant for the OH(upsilon=0) + N(4S) --> H + NO reaction. From comparison of the OH(upsilon=0 and 1) decay rates, the ratio of the rate constant k(upsilon=1)(OH-N) for removal of OH(upsilon=1) in collisions with N(4S) and the corresponding OH(upsilon=0) rate constant, k(upsilon=0)(OH-N) was determined to be 1.61 +/- 0.42, yielding k(upsilon=1)(OH-N) = (7.6 +/- 2.1) x 10(-11) cm3 molecule(-1) s(-1), where the quoted uncertainty (95% confidence limits) includes the uncertainty in k(upsilon=0)(OH-N). Thus, the collisional removal of OH(upsilon=1) by N(4S) atoms is found to be faster than for OH(upsilon=0).     

A kinetic and product study of the Cl + HO2 reaction

Absolute rate data and product branching ratios for the reactions Cl + HO2 --> HCl + O2 (k1a) and Cl + HO2 --> OH + ClO (k1b) have been measured from 226 to 336 K at a total pressure of 1 Torr of helium using the discharge flow resonance fluorescence technique coupled with infrared diode laser spectroscopy. For kinetic measurements, pseudo-first-order conditions were used with both reagents in excess in separate experiments. HO2 was produced by two methods: through the termolecular reaction of H atoms with O2 and also by the reaction of F atoms with H2O2. Cl atoms were produced by a microwave discharge of Cl2 in He. HO2 radicals were converted to OH radicals prior to detection by resonance fluorescence at 308 nm. Cl atoms were detected directly at 138 nm also by resonance fluorescence. Measurement of the consumption of HO2 in excess Cl yielded k1a and measurement of the consumption of Cl in excess HO2 yielded the total rate coefficient, k1. Values of k1a and k1 derived from kinetic experiments expressed in Arrhenius form are (1.6 +/- 0.2) x 10(-11) exp[(249 +/- 34)/T] and (2.8 +/- 0.1) x 10(-11) exp[(123 +/- 15)/T] cm3 molecule(-1) s(-1), respectively. As the expression for k1 is only weakly temperature dependent, we report a temperature-independent value of k1 = (4.5 +/- 0.4) x 10(-11) cm3 molecule(-1) s(-1). Additionally, an Arrhenius expression for k1b can also be derived: k1b = (7.7 +/- 0.8) x 10(-11) exp[-(708 +/- 29)/T] cm3 molecule(-1) s(-1). These expressions for k1a and k1b are valid for 226 K < or = T < or = 336 and 256 K < or = T < or = 296 K, respectively. The cited errors are at the level of a single standard deviation. For the product measurements, an excess of Cl was added to known concentrations of HO2 and the reaction was allowed to reach completion. HCl product concentrations were determined by IR absorption yielding the ratio k1a/k1 over the temperature range 236 K < or = T < or = 296 K. OH product concentrations were determined by resonance fluorescence giving rise to the ratio k1b/k1 over the temperature range 226 K < or = T < or = 336 K. Both of these ratios were subsequently converted to absolute numbers. Values of k1a and k1b from the product experiments expressed in Arrhenius form are (1.5 +/- 0.1) x 10(-11) exp[(222 +/- 17)/T] and (10.6 +/- 1.5) x 10(-11) exp[-(733 +/- 41)/T] cm3 molecule(-1) s(-1), respectively. These expressions for k1a and k1b are valid for 256 K < or = T < or = 296 and 226 K < or = T < or = 336 K, respectively. A combination of the kinetic and product data results in the following Arrhenius expressions for k1a and k1b of (1.4 +/- 0.3) x 10(-11) exp[(269 +/- 58)/T] and (12.7 +/- 4.1) x 10(-11) exp[-(801 +/- 94)/T] cm3 molecule(-1) s(-1), respectively. Numerical simulations were used to check for interferences from secondary chemistry in both the kinetic and product experiments and also to quantify the losses incurred during the conversion process HO2 --> OH for detection purposes.     

Study of the chemistry of ortho- and para-biphenylnitrenes by laser flash photolysis and time-resolved IR experiments and by B3LYP and CASPT2 calculations

The photochemistry of ortho-biphenyl azide (1a) has been studied by laser flash photolysis (LFP), with UV-vis and IR detection of the transient intermediates formed. LFP (266 nm) of 1a in glassy 3-methylpentane at 77 K releases singlet ortho-biphenylnitrene (1b) (lambda(max) = 410 nm, tau = 59 +/- 6 ns), which under these conditions decays cleanly to the lower energy triplet state. In fluid solution at 298 K, 1b rapidly (tau < 10 ns) partitions between formation of isocarbazole (4) (lambda(max) = 430 nm, tau = 70 ns) and benzazirine (1e) (lambda(max) = 305 nm, tau = 12 ns). Isocarbazole 4 undergoes a 1,5-hydrogen shift, with k(H)/k(D) = 3.4 at 298 K to form carbazole 9 and smaller amounts of two other isocarbazoles (7 and 8). Benzazirine 1e ring-opens reversibly to azacycloheptatetraene (1f), which serves as a reservoir for singlet nitrene 1b. Azacycloheptatetraene 1f ultimately forms carbazole 9 on the millisecond time scale by the pathway 1f --> 1e --> 1b --> 4 --> 9. The energies of the transient intermediates and of the transition structures connecting them were successfully predicted by CASPT2/6-31G calculations. The electronic and vibrational spectra of the intermediates, computed by density functional theory, support the assignment of the transient spectra, observed in the formation of 9 from 1a.     

Ultrafast predissociation dynamics of water molecules excited to the electronic C and D states

Two-photon excitation with femtosecond laser pulses in the spectral range 240-250 nm was used to prepare vapor phase H(2)O and D(2)O in the C (1)B(1) and D (1)A(1) states. Both states are predissociated via the B (1)A(1) state, forming excited OH/OD(A (2)Sigma(+)) as well as ground state OH/OD(X (2)Pi). We used ultrashort infrared probe pulses (1.65-2.42 microm) to control the ratio between these excited and ground state fragments originating from the dissociation process. Time resolved detection of the OH/OD(A (2)Sigma(+)) --> OH/OD(X (2)Pi) fluorescence allows us to monitor the dynamics of the predissociation. For the heterogeneous predissociation out of the C(1)B(1) state life times of (0.5 +/- 0.1) ps and (1.2 +/- 0.1) ps were found for H(2)O and D(2)O, respectively. The purely homogeneous character of the predissociation out of the D (1)A(1) state was monitored.     

Importance of properties of the lowest and higher singlet excited states on the resonant two-photon ionization of stilbene and substituted stilbenes using two-color two-lasers

Radical cations of trans-stilbene and substituted trans-stilbenes (stilbenes and the radical cations denote Sand S(*+), respectively) were generated from the resonant two-photon ionization (TPI) in acetonitrile with irradiation of one-laser (266- or 355-nm laser) and with simultaneous irradiation of two-color two-lasers (266- and 532-nm or 355- and 532-nm lasers) with the pulse width of 5 ns each. The formation yields of S(*+), the TPI efficiency, depended on the properties of S in the lowest and higher singlet excited state (S(S(1)) and S(S(n))), generated from one-photon excitation with 266- or 355-nm laser and from two-photon excitation with simultaneous irradiation of 266- and 532-nm or 355- and 532-nm lasers, respectively. The TPI efficiency using two-color two-lasers increased compared with that using one-laser. It is confirmed that the TPI proceeds through two-step two-photon excitation with the S(0) --> S(1) --> S(n)() transition. In addition to the electronic character of S(S(0)) which depends on the substituent of S, oxidation potential, and molar absorption coefficient of the S(0) --> S(1) absorption as well-known important factors for the TPI efficiency, it is shown that properties of S(S(1)) and S(S(n)) such as lifetimes, electronic characters of S(S(1)) and S(S(n)), molar absorption coefficient of the S(1) --> S(n) absorption, and ionization rate from S(S(n)) are also important.     

Experimental detection and theoretical characterization of the H2-NHX van der Waals complex

The H2-NH(X) van der Waals complex has been examined using ab initio theory and detected via fluorescence excitation spectroscopy of the A(3)Pi-X(3)Sigma(-) transition. Electronic structure calculations show that the minimum energy geometry corresponds to collinear H2-NH(X), with a well depth of D(e)=116 cm(-1). The potential-energy surface supports a secondary minimum for a T-shaped geometry, where the H atom of NH points towards the middle of the H2 bond (C(2v) point group). For this geometry the well depth is 73 cm(-1). The laser excitation spectra for the complex show transitions to the H2+NH(A) dissociative continuum. The onset of the continuum establishes a binding energy of D(0)=32+/-2 cm(-1) for H2-NH(X). The fluorescence from bound levels of H2-NH(A) was not detected, most probably due to the rapid reactive decay [H2-NH(A)-->H+NH2]. The complex appears to be a promising candidate for studies of the photoinitiated H2+NH abstraction reaction under conditions were the reactants are prealigned by the van der Waals forces.     

Extreme conformational constraints in pi-extended tetrathiafulvalenes: unusual topologies and redox behavior of doubly and triply bridged cyclophanes

Doubly and triply bridged 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene (ex-TTF) derivatives have been synthesized. Key steps are the generation and macrocyclization reactions of ex-TTF-dithiolate reagents. The X-ray crystal structures of the doubly bridged cyclophanes 15 and 16 and the triply bridged system 23 show that the saddle-like conformation of the ex-TTF framework is enhanced by the short bridges between the dithiole rings. Unlike all previous ex-TTF derivatives (which display a single quasi-reversible two-electron oxidation wave, D0 --> D2+), cyclic voltammetry of the cyclophanes reveals two reversible, one-electron oxidation steps (D0 --> D*+ --> D2+), with differences between the half-wave potentials (E2(1/2) - E1(1/2)) of 0.22-0.26 V. The conformational changes and gain in aromaticity which drive the second oxidation process in unrestricted ex-TTF systems (including singly bridged cyclophanes) have been prevented by multiple bridging. The radical cation species gives rise to a very broad, low-energy band (lambdamax = 2175 and 2040 nm for 15 and 21, respectively), assigned to an intramolecular interaction. The steric constraints imposed by multiple bridging have become so extreme that the pi-framework of 15, 16, 21, and 23 exhibits remarkable optical and redox behavior which is not characteristic of ex-TTF systems.     

Dual electron transfer pathways from 4,4'-dimethoxybenzophenone ketyl radical in the excited state to parent molecule in the ground state

Dual intermolecular electron transfer (ELT) pathways from 4,4'-dimethoxybenzophenone (1) ketyl radical (1H*) in the excited state [1H*(D1)] to the ground-state 4,4'-dimethoxybenzophenone [1(S0)] were found in 2-methyltetrahydrofuran (MTHF) by observing bis(4-methoxyphenyl)methanol cation (1H+) and 4,4'-dimethoxybenzophenone radical anion (1*-) during nanosecond-picosecond two-color two-laser flash photolysis. ELT pathway I involved the two-photon ionization of 1H* following the injection of electron to the solvent. The solvated electron was quickly trapped by 1(S0) to produce 1*-. ELT pathway II was a self-quenching-like ELT from 1H*(D1) to 1(S0) to give 1H+ and 1*-. From the fluorescence quenching of 1H*(D1), the ELT rate constant was determined to be 1.0 x 10(10) M(-1) s(-1), which is close to the diffusion-controlled rate constant of MTHF. The self-quenching-like ELT mechanism was discussed on the basis of Marcus' ELT theory.     

Experimental and theoretical study of the photodissociation reaction of thiophenol at 243 nm: intramolecular orbital alignment of the phenylthiyl radical

The photoinduced hydrogen (or deuterium) detachment reaction of thiophenol (C(6)H(5)SH) or thiophenol-d(1) (C(6)H(5)SD) pumped at 243 nm has been investigated using the H (D) ion velocity map imaging technique. Photodissociation products, corresponding to the two distinct and anisotropic rings observed in the H (or D) ion images, are identified as the two lowest electronic states of phenylthiyl radical (C(6)H(5)S). Ab initio calculations show that the singly occupied molecular orbital of the phenylthiyl radical is localized on the sulfur atom and it is oriented either perpendicular or parallel to the molecular plane for the ground (B(1)) and the first excited state (B(2)) species, respectively. The experimental energy separation between these two states is 2600+/-200 cm(-1) in excellent agreement with the authors' theoretical prediction of 2674 cm(-1) at the CASPT2 level. The experimental anisotropy parameter (beta) of -1.0+/-0.05 at the large translational energy of D from the C(6)H(5)SD dissociation indicates that the transition dipole moment associated with this optical transition at 243 nm is perpendicular to the dissociating S-D bond, which in turn suggests an ultrafast D+C(6)H(5)S(B(1)) dissociation channel on a repulsive potential energy surface. The reduced anisotropy parameter of -0.76+/-0.04 observed at the smaller translational energy of D suggests that the D+C(6)H(5)S(B(2)) channel may proceed on adiabatic reaction paths resulting from the coupling of the initially excited state to other low-lying electronic states encountered along the reaction coordinate. Detailed high level ab initio calculations adopting multireference wave functions reveal that the C(6)H(5)S(B(1)) channel may be directly accessed via a (1)(n(pi),sigma(*)) photoexcitation at 243 nm while the key feature of the photodissociation dynamics of the C(6)H(5)S(B(2)) channel is the involvement of the (3)(n(pi),pi(*))-->(3)(n(sigma),sigma(*)) profile as well as the spin-orbit induced avoided crossing between the ground and the (3)(n(pi),sigma(*)) state. The S-D bond dissociation energy of thiophenol-d(1) is accurately estimated to be D(0)=79.6+/-0.3 kcalmol. The S-H bond dissociation energy is also estimated to give D(0)=76.8+/-0.3 kcalmol, which is smaller than previously reported ones by at least 2 kcalmol. The C-H bond of the benzene moiety is found to give rise to the H fragment. Ring opening reactions induced by the pi-pi(*)n(pi)-pi(*) transitions followed by internal conversion may be responsible for the isotropic broad translational energy distribution of fragments.