C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

Synthesis, structure, and catalytic properties of V(IV), Mn(III), Mo(VI), and U(VI) complexes containing bidentate (N, O) oxazine and oxazoline ligands

Synthesis of seven complexes containing oxazoline ([(L(1))(2)V=O] (4), [(L(1))(2)MoO(2)] (5), [(L(1))(2)UO(2)] (6); HL(1) (1) [HL(1) = 2-(4',4'-dimethyl-3'-4'-dihydroxazol-2'-yl)phenol]), chiral oxazoline ([(L(2))(2)UO(2)] (7); HL(2) (2) [HL(2) = (4'R)-2-(4'-ethyl-3'4'-dihyroxazol-2'-yl)phenol]), and oxazine ([(L(3))(2)V=O] (8), [(L(3))(2)Mn(CH(3)COO(-))] (9), [(L(3))(2)Co] (10); HL(3) (3) [HL(3) = 2-(5,6-dihydro-4H-1,3-oxazolinyl)phenol]) and their characterization by various techniques such as UV-vis, IR, and EPR spectroscopy, mass spectrometry, cyclic voltammetry, and elemental analysis are reported. The novel oxazine (3) and complexes 4, 5, 8 and 9 were also characterized by X-ray crystallography. Oxazine 3 crystallizes in the monoclinic system with the P2(1)/n space group, complexes 4 and 9 crystallize in the monoclinic system with the P2(1)/c space group, and complexes 5 and 8 crystallize in the orthorhombic system with the C222(1) space group and the P2(1)2(1)2(1) chiral space group, respectively. The representative synthetic procedure involves the reaction of metal acetate or acetylacetonate derivatives with corresponding ligand in ethanol. Addition of Mn(OAc)(2).4H(2)O to an ethanol solution of 3 gave the unexpected complex Mn(L(3))(2).(CH(3)COO(-)) (9) where the acetate group is coordinated with the metal center in a bidentate fashion. The catalytic activity of complexes 4-9 for oxidation of styrene with tert-butyl hydroperoxide was tested. In all cases, benzaldehyde formed exclusively as the oxidation product.     

C3-chiral tripodal amido complexes

A comprehensive study into the coordination chemistry of two C3-chiral tripodal amido ligands has been carried out. The amido ligands contain a trisilylmethane backbone and chiral peripheral substituents. The amine precursors. HC(SiMe2NH[(S)-1-phenylethyl]]3 (1) and HC[SiMe2NH[(R)-1-indanyl]]3 (2) were found to be in equilibrium in solution with the cyclic diamines HC[SiMe2N[(S)-1-phenylethyl]2](SiMe2NH-[(S)-1-phenylethyl]] (3) and HC[SiMe2NH[(R)-1-indanyl]][SiMe2NH[(R)-1-indanyl]) (4), which are generated upon ejection of one molecule of the chiral primary amine. Reaction of these equilibrium mixtures with three molar equivalents of butyllithium instantaneously gave the trilithium triamides HC[SiMe2N(Li)[(S)-1-phenylethyl]]3 (5) and HC[SiMe2N(Li)[(R)-1-indanyl]]3 (6), both of which were characterised by an X-ray diffraction study. Both lithium compounds possess a central heteroadamantane core, in which the two-coordinate Li atoms are additionally weakly solvated by the three aryl groups of the chiral peripheral substituents, the Li-C contacts being in the range of 2.65-2.73 A. Reaction of 5 and 6 with [TiCl4(thf)2] and ZrCl4 gave the corresponding amido complexes [TiCl-[HC[SiMe2N[(S)-1-phenylethyl]]3]] (7), [TiCl(HC[SiMe2N[(R)-1-indanyl]]3]] (8), [ZrCl[HC[SiMe2N[(S)-1-phenylethyl]]3]] (9) and [ZrCl[HC[SiMe2N[(R)-1-indanyl]]3]] (10), respectively. Of these, compound 7 was structurally characterised by X-ray structure analysis and was shown to possess a C3-symmetrical arrangement of the tripod ligand. The chiral anionic dinuclear complex [Li-(OEt2)4][Zr2Cl3[HC[SiMe2N[(S)-1-phenylethyl]]3]2] (11) was isolated from reaction mixtures leading to 9. An X-ray diffraction study established its dimeric structure, in which the chiral amido ligands cap the two metal centres, which are linked through three symmetrically arranged, bridging chloro ligands. Reaction of 9 and 10 with a series of alkyl Grignard and alkyllithium reagents yielded the corresponding alkylzirconium complexes. X-ray structure analyses of [Zr(CH3)[HC[SiMe2N[(S)-1-phenylethyl]]3]] (12) and [Zr(CH3)-[HC[SiMe2N)[(R)-1-indanyl]]3]] (20) established their detailed molecular arrangements. While the reaction of 12 with the aryl ketones PhC(O)R (R = CH = CHPh, iPr, Et) gave the corresponding C-O insertion products, which contain an additional chiral centre in the alkoxy group, with low stereoselectivity (0-40% de). The corresponding conversions with several aryl aldehydes yielded the alkoxo complexes with high stereoselectivity. Upon hydrolysis, the chiral alcohols were isolated and shown to have enantiomeric excesses between 68 and 82%. High stereodiscrimination was also observed in the insertion reactions of several chiral ketones and aldehydes. However, this was shown to originate primarily from the chirality of the substrate. In analogous experiments with carbonyl compounds, the ethyl- and butyl-zirconium analogues of 12 did not undergo CO insertion into the metal-alkyl bond. Instead, beta-elimination and formal insertion into the metal-hydride bond occurred. It was found that the elimination of the alkene was induced by     

Synthesis of New Chiral C2-Symmetrical Bis(oxazoline )Compounds

New chiral C2-symmetrical bis(oxazoline)compounds bearing one isobutyl-,secbutyl-benzyl- or isopropyl-substituent at the 4-position have been prepared and characterized.     

An Asymmetric Synthesis of L-694,458, a Human Leukocyte Elastase Inhibitor, via Novel Enzyme Resolution of beta-Lactam Esters

A convergent synthesis of [S-(R,S)]-2-[4-[(4-methylpiperazin-1-yl)carbonyl]phenoxy]-3,3-diethyl-N-[1-[3,4-(methylenedioxy)phenyl]butyl]-4-oxo-1-azetidinecarboxamide (L-694,458, 1), a potent human leukocyte elastase inhibitor, was achieved via chiral synthesis of key intermediates: (S)-3,3-diethyl-4-[4'-[(N-methylpiperazin-1-yl)carbonylphenoxy]-2-azetidinone (2) and (R)-alpha-propylpiperonyl isocyanate (3). Synthesis of beta-lactam 2 was achieved by a novel enantioselective lipase hydrolysis of ester 5 to produce (S)-3,3-diethyl-4-(4'-carboxyphenoxy)-2-azetidinone (6) (60% yield, three cycles, 93% ee) with isolation, epimerization, and recycling of the undesired (R)-ester 5. Isocyanate 3 was prepared by chiral addition of Zn(n-Pr)(2) to piperonal (98% yield, 99.2% ee), azide displacement and reduction to (R)-alpha-propylpiperonylamine (11) (58% yield, 85% ee), crystallization as the D-pyroglutamic acid salt (92% yield, 98.2% ee), and isocyanate formation (98% yield) with phosgene.     

Hierarchical superstructures with control of helicity from the self-assembly of chiral bent-core molecules

Herein, two asymmetric chiral bent-core molecules, 3-[(4-{[4-(heptyloxy)benzoyl]oxy}benzoyl)oxy]-phenyl-4-[(4-{[(1R)-1-methylheptyl]oxy}benzoyl)oxy] benzoate (BC7R) and 3-[(4-{[4-(heptyloxy)benzoyl]oxy}benzoyl)oxy]-phenyl-4-[(4-{[(1S)-1-methylheptyl]oxy}benzoyl)oxy] benzoate (BC7S), were synthesized to demonstrate control of the helicity of their self-assembled hierarchical superstructures. Mirror-imaged CD spectra showed a split-type Cotton effect after the formation of self-assembled aggregates of BC7R and BC7S, thereby suggesting the formation of intermolecular exciton couplets with opposite optical activities. Both twisted and helical ribbons with preferential helicity that corresponded to the twisting character of the intermolecular exciton couplet were found in the aggregates. The formation of helical ribbons was attributed to the merging of twisted ribbons through an increase in width to improve morphological stability. As a result, control of the helicity of hierarchical superstructures from the self-assembly of bent-core molecules could be achieved by taking advantage of the transfer of chiral information from the molecular level onto the hierarchical scale.     

Synthesis of planar chiral phosphapalladacycles by highly enantioselective transcyclopalladation

The first highly enantioselective synthesis of planar chiral ferrocene phosphapalladacycles was performed by high-yielding asymmetric transcyclopalladation with cobalt oxazoline palladacycles (COP). Use of di-mu-acetatobis[(eta5-(S)-(pR)-2-(2'-(4'-isopropyl)oxazolinyl)cyclopentadienyl-C1,N3')(eta4-tetraphenylcyclobutadiene)cobalt]dipalladium(II), followed by acetate/chloride ligand exchange, gave (pS)-di-mu-chloro[2-(2-dicyclohexylphosphino)phenylferroene-C1,P)dipalladium(II) (95% ee). Similarly, diastereomeric di-mu-acetatobis[(eta5-(S)-(pS)-2-(2'-(4'-tert-butyl)oxazolinyl)cyclopentadienyl-C1,N3')(eta4-tetraphenylcyclobutadiene)cobalt]dipalladium(II) led to the enantiomeric (pR)-phosphapalladacycle (95% ee), revealing the control of these reactions by the element of planar chirality in COP. The reactions were extended to the synthesis of (pS)- and (pR)-di-mu-chloro[2-(2-diphenylphosphino)phenylferroene-C1,P)dipalladium(II) (78 and 92% ee, respectively). In all cases, the palladium-free precursors to COP were recovered for recycling.     

Synthesis of Chiral 1,3-Bis(oxazolinyl)benzene

In recent years, C₂-symmetric chiral bis (oxazoline) ligand-metal complexes have received a great of attention through their use in various catalytic processes^[1-2]. Since the early 1990s, many impressive enantioselective carbon-carbon bond forming reactions, aziridination reactions, hydrosilylations, oxidations and reductions have been recorded using bis (oxazoline)-metal complexes with wide structural diversity^[3-4]. The latest review is intended to focus on the recent developments of bis(oxazoline) ligand-metal catalyzed asymmetric reactions and their applications in organic synthesis. Herein we intend to report the synthesis of a new type of chiral bis(oxazoline), 1,3-bis(oxazolinyl)benzene. Application of their asymmetric catalysis is under working.     

Synthesis and properties of chiral ammonium-based ionic liquids

New chiral ammonium-based ionic liquids containing the (1R,2S,5R)-(-)-menthyl group can be easily and efficiently prepared under ambient conditions. The preparation and characterization of trialkyl[(1R,2S,5R)-(-)-menthoxymethyl]ammonium salts is reported. The salts have been demonstrated to be air- and moisture-stable under ambient conditions and can be readily used in a variety of standard experimental procedures. The single-crystal X-ray structure of butyldimethyl[(1R,2S,5R)-(-)-menthoxymethyl]ammonium chloride has been determined. The chiral, room-temperature ionic liquids have been characterized by physical properties such as specific rotation, density, viscosity, thermal degradation, and glass transition temperature. Trialkyl[(1R,2S,5R)-(-)-menthoxymethyl]ammonium chloride prototype ionic liquids have also been found to exhibit strong antimicrobial and high antielectrostatic activities.     

Design, synthesis, and 1,3-dipolar cycloaddition of (5R)- [and (5S)]-5,6-dihydro-5-phenyl-2H-1,4-oxazin-2-one N-oxides as chiral (E)-geometry-fixed alpha-alkoxycarbonylnitrones

Optically pure (5R)- [and (5S)]-5,6-dihydro-5-phenyl-2H-1, 4-oxazin-2-one N-oxides [(5R)- and (5S)-2] were designed as chiral (E)-geometry-fixed alpha-alkoxycarbonylnitrones 1. The nitrones (5R)- and (5S)-2 were synthesized by three-step oxidation of (R)- and (S)-phenylglycinols [(R)- and (S)-3], condensation of the resulting (R)- and (S)-2-hydroxylamino-2-phenylethanols [(R)- and (S)-5] with glyoxylic acid, and cyclization of the intermediary nitrones (R)- and (S)-6b. The nitrone (5R)-2reacted with olefins 7-14 under mild conditions to afford the corresponding cycloadducts 15-22 as the main products via the least sterically demanding exo modes. Cycloadduct 30 obtained from (5S)-2 and cyclopentadiene was effectively elaborated to (1S,4S, 5R)-4-benzyloxycarbonylamino-2-oxabicyclo[3.3.0]oct-7-en-3-one (28), the key synthetic intermediate of carbocyclic polyoxin C.     

Chiral Cyclopentane-Based Mimics of D-myo-Inositol 1,4,5-Trisphosphate from D-Glucose

Two routes from D-glucose to chiral, ring-contracted analogs of the second messenger D-myo-inositol 1,4,5-trisphosphate are described. Methyl alpha-D-glucopyranoside was converted by an improved procedure into methyl 4,6-O-(p-methoxybenzylidene)-alpha-D-glucopyranoside (6) and thence into methyl 2-O-benzyl-3,4-bis-O-(p-methoxybenzyl)-alpha-D-gluco-hexodialdopyranoside (1,5) (14) in four steps. In the first ring-contraction method 14 was converted into methyl 2-O-benzyl-6,7-dideoxy-3,4-bis-O-(p-methoxybenzyl)-alpha-D-gluco-hept-6-enopyranoside (1,5) (15), which on sequential treatment with Cp(2)Zr(n-Bu)(2) followed by BF(3).Et(2)O afforded a mixture of (1R,2S,3S,4R,5S)-3-(benzyloxy)-4-hydroxy-1,2-bis[(p-methoxybenzyl)oxy]-5-vinylcyclopentane (16) and its 4S,5R diastereoisomer 17. Removal of the p-methoxybenzyl groups of 16 and subsequent phosphorylation and deprotection afforded the first target compound, (1R,2R,3S,4R,5S)-3-hydroxy-1,2,4-tris(phosphonooxy)-5-vinylcyclopentane (3). In the second route, intermediate 14 was subjected to SmI(2)-mediated ring contraction to give (1R,2S,3S,4R,5S)-3-(benzyloxy)-4-hydroxy-5-(hydroxymethyl)-1,2-bis[(p-methoxybenzyl)oxy]cyclopentane (20). Benzylation of 20 provided (1R,2S,3S,4R,5S)-3-(benzyloxy)-6-[(benzyloxy)methyl]-4-hydroxy-1,2-bis[(p-methoxybenzyl)oxy]cyclopentane (22) and (1R,2S,3S,4R,5S)-3,4-bis(benzyloxy)-5-(hydroxymethyl)-1,2-bis[(p-methoxybenzyl)oxy]cyclopentane (21), which were elaborated to the target trisphosphates (1R,2R,3S,4R,5S)-3-hydroxy-5-(hydroxymethyl)-1,2,4-tris(phosphonooxy)cyclopentane (4) and (1R,2S,3R,4R,5S)-1,2-dihydroxy-3,4-bis(phosphonooxy)-5-[(phosphonooxy)methyl]cyclopentane (5), respectively. Both 3 and 4 mobilized intracellular Ca(2+), but 4 was only a few fold less potent than D-myo-inositol 1,4,5-trisphosphate, demonstrating that effective mimics can be designed that do not bear a six-membered ring.     

Direct chemical synthesis of chiral methanol of 98% ee and its conversion to [(2)H1,(3)H]methyl tosylate and [(2)H1,(3)H-methyl]methionine

This paper describes the synthesis of chiral methanols [(R)- and (S)-CHDTOH] in a total of 12 steps starting from (chloromethyl)dimethylphenylsilane. The metalated carbamates derived from (dimethylphenylsilyl)methanol and secondary amines were borylated at low temperatures (-78 or -94 degrees C) using borates derived from tert-butyl alcohol and (+)-pinane-2,3-diol or (R,R)-1,2-dicyclohexylethane-1,2-diol to give diastereomeric boronates (dr 1:1 to 5:1). The carbamoyloxy group could be replaced smoothly with inversion of configuration by an isotope of hydrogen using LiAlH(D)4 [or LiBEt3H(D,T)]. If the individual diastereomeric boronates were reduced with LiAlD4 and oxidized with H2O2/NaHCO3, monodeuterated (dimethylphenylsilyl)methanols of ee > 98% resulted. The absolute configurations of the boronates were based on a single-crystal X-ray structure analysis. Brook rearrangement of the enantiomers of (dimethylphenylsilyl)-[(2)H1,(3)H]methanol prepared similarly furnished the chiral methanols which were isolated as 3,5-dinitrobenzoates in 81% and 90% yield, respectively. For determination of the enantiomeric excesses (98%), the methyl groups were transferred to the nitrogen of (S)-2-methylpiperidine and (3)H{(1)H} NMR spectra were recorded. The Brook rearrangement is a stereospecific process following a retentive course. The chiral methanols were also transformed into methyl tosylates used to prepare [(2)H1,(3)H-methyl]methionines in high overall yields (>80%).     

Highly enantioselective synthesis of chiral 3-substituted indolines by catalytic asymmetric hydrogenation of indoles

[reaction: see text] N-Tosyl 3-substituted indoles were hydrogenated with high enantioselectivities (95-98% ee) by use of a trans-chelating chiral bisphosphine, (S,S)-(R,R)-PhTRAP ligand. The chiral catalyst, which was generated in situ from [Rh(nbd)(2)]SbF(6), PhTRAP, and Cs(2)CO(3), is useful for enantioselectively synthesizing a range of diverse optically active indolines possessing a chiral carbon at the 3-position.     

Non-centrosymmetric packing of 1-D coordination networks based on chirality

Using CoCl2 and a chiral tecton possessing C2 chirality and based on two coordination poles composed of a pyridine unit connected at the 4-position to a pyridine bearing at the 2 and 6 positions two optically active oxazoline moieties, a polar solid is obtained. The latter results from the acentric packing of directional 1-D coordination networks.     

Chiral ionic liquid-mediated photochirogenesis. Enantiodifferentiating photocyclodimerization of 2-anthracenecarboxylic acid

Enantiodifferentiating photocyclodimerization of 2-anthracenecarboxylic acid (AC-H) and its lithium salt (AC-Li) in chiral ionic liquid (CIL), (R)-1-(2,3-dihydroxypropyl)-3-methylimidazolium acetate {[(R)-GLYMI][AcO]}, gave a mixture of two head-to-tail (HT) and two head-to-head (HH) cyclodimers in HT/HH ratios of 1.3-1.7 (for AC-H) and 2.2-4.3 (for AC-Li) with low enantiomeric excesses (ee) of 0-3% for chiral syn-HT and anti-HH dimers. In contrast, irradiation of AC-H in an aqueous solution, containing cucurbit[8]uril (CB[8]) as a host and [(R)-GLYMI][AcO] or [(R)-GLYMI][Tf(2)N] as a modifier of CB portals, afforded the HH dimers in 91-99% selectivity, although the anti-HH dimer was totally racemic. Interestingly, irradiation of AC-H in a dichloromethane solution, containing [(R)-GLYMI][AcO] as a chiral template, led to the formation of the HH-dimers in 98% selectivity with chiral anti-HH dimer in -14% ee, presumably by the dual ligation of two ACs to a CIL through electrostatic and hydrogen-bonding interactions.     

天然产物Kinsenoside的全合成研究

以5-(R)-[(1R，2S，5R)-孟氧基]-2(5H)-呋喃酮为关键手性合成子，完成了具有抗高血脂活性的天然产物kinsenoside的全合成研究。     

2-chloro-(4R,5R)-bis[(1R,2S,5R)-menth-1-yloxycarbonyl)]-1,3,2-dioxaphospholane: a practical chiral pool-derived reagent for determining enantiomeric purity of alcohols

2-Chloro-(4 R,5 R)-bis[(1 R,2 S,5 R)-menth-1-yloxycarbonyl)]-1,3,2-dioxaphospholane is a practical reagent for reliably determining enantiomeric purity of chiral alcohols via (31)P NMR spectroscopy. The compound is available as a crystalline solid on a 20 g scale from PCl 3 and bis[(1 R,2 S,5 R)-menth-1-yl] tartrate. It is comparatively inert toward spontaneous hydrolysis under conventional laboratory conditions but undergoes quantitative substitution of alkoxide for chloride if treated with a chiral alcohol. Nonequivalent (31)P NMR signals of diastereomeric 2-alkoxy-1,3,2-dioxophospholanes were dispersed by approximately 1.4-0.1 ppm. The associated integral ratios reflected enantiomeric purities of preweighted samples of ( R)- and ( S)-1-phenylethanol, (+)- and (-)-menthol, and a set of primary, secondary, and tertiary alcohols with a precision of +/-0.4-1.0%.     

One-electron versus two-electron mechanisms in the oxidative addition reactions of chloroalkanes to amido-bridged rhodium complexes

The compound syn-[{Rh(mu-NH{p-tolyl})(CNtBu)(2)}(2)] (1) oxidatively adds C--Cl bonds of alkyl chlorides (RCl) and dichloromethane to each metal centre to give the cationic complexes syn-[{Rh(mu-NH{p-tolyl})(eta(1)-R)(CNtBu)(2)}(2)(mu-Cl)]Cl and anti-[{Rh(mu-NH{p-tolyl})Cl(CNtBu)(2)}(2)(mu-CH(2))]. Reaction of 1 with the chiral alkyl chloride (-)-(S)-ClCH(Me)CO(2)Me (R*Cl) gave [{Rh(mu-NH{p-tolyl})(eta(1)-R*)(CNtBu)(2)}(2)(mu-Cl)]Cl ([3]Cl) as an equimolecular mixture of the meso form (R,S)-[3]Cl-C(s) and one enantiomer of the chiral form [3]Cl-C(2). This reaction, which takes place in two steps, was modeled step-by-step by reacting the mixed-ligand complex syn-[(cod)Rh(mu-NH{p-tolyl})(2)Rh(CNtBu)(2)] (4) with R*Cl, as a replica of the first step, to give [(cod)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)] (5) with racemization of the chiral carbon. Further treatment of 5 with CNtBu to give the intermediate [(CNtBu)(2)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)], followed by reaction with R*Cl reproduced the regioselectivity of the second step to give (R,S)-[3]Cl-C(s) and [3]Cl-C(2) in a 1:1 molar ratio. Support for an S(N)2 type of reaction with inversion of the configuration in the second step was obtained from a similar sequence of reactions of 4 with ClCH(2)CO(2)Me first, then with CNtBu, and finally with R*Cl to give [(CNtBu)(2)(eta(1)-CH(2)R)Rh(mu-NH{p-tolyl})(2)(mu-Cl)Rh(eta(1)-R*)(CNtBu)(2)]Cl (R = CO(2)Me, [7]Cl) as a single enantiomer with the R configuration at the chiral carbon. The reactions of 1 with (+)-(S)-XCH(2)CH(CH(3))CH(2)CH(3) (X = Br, I) gave the related complexes [{Rh(mu-NH{p-tolyl})(eta(1)-CH(2)CH(CH(3))CH(2)CH(3))(CNtBu)(2)}(2)(mu-X)]X, probably by following an S(N)2 profile in both steps.     

Diastereoselective hydroxylation of 6-substituted piperidin-2-ones. An efficient synthesis of (2S,5R)-5-hydroxylysine and related alpha-amino acids

The synthesis of (2S,5R)-5-hydroxy-6-oxo-1,2-piperidinedicarboxylates (5) and related (3S,6R)-3-hydroxy-6-alkyl-2-oxo-1-piperidinecarboxylates has been developed. The approach is based on the asymmetric hydroxylation of enolates generated from the corresponding N-protected-6-substituted piperidin-2-ones. The utility of 5a as a precursor in the synthesis of (2S,5R)-5-hydroxylysine (1), an amino acid unique to collagen and collagen-like proteins, has also been demonstrated. (2S)-6-oxo-1,2-piperidinedicarboxylates (6) required for hydroxylation studies were prepared in 38-74% yield, starting from conveniently protected aspartic acid as inexpensive chiral adduct. Hydroxylation of 6 to 5 proceeds in high yield and excellent diastereoselectivity by treatment of their Li-enolate with (+)-camphorsulfonyloxaziridine at -78 degrees C. Ring opening of di-tert-butyl (2S,5R)-6-oxo-1,2-piperidinedicarboxylate ((5R)-5a) under reductive conditions afforded the corresponding 1,2-diol (17) in 91%, which was further transformed to (2S,5R)-5-hydroxylysine in four steps (84%). 17 is also a versatile intermediate in the preparation of tert-butyl (2S,5R)-2-[(tert-butoxycarbonyl)amino]-5-hydroxy-6-iodohexanoate (3) and tert-butyl (2S)-2-[(tert-butoxycarbonyl)amino]-4-[(2R)-oxiranyl]butanoate (4), two amino acid derivatives used in the total synthesis of the bone collagen cross-link (+)-pyridinoline (2a).     

Synthesis of optically active NC-1800, a therapeutic agent for urinary disturbance.

A new synthetic method for chiral oxazolidinone derivatives, therapeutic agents for treating urinary disturbance, is described. The condensed compound obtained from chiral 1-amino-3-phenyl-2-propanol and 1-phenyl-3-morpholino-1-propanone was reduced with Me4NBH(OAc)3 to give the intermediate, 1-(3-morpholino-1-phenylpropyl)amino-3-phenyl-2-propanol (MAPP) in 34% diastereomeric excess (d.e.). MAPP was converted to an urethane and purified by recrystallization of its methanesulfonate, to afford a single isomer, (2R)-1-[N-[(1S)-3-morpholino-1-phenylpropyl]-N -ethoxycarbonyl]amino-3-phenyl-2-propanol methanesulfonate (4-A. methanesulfonate).