High-voltage contactless conductivity detection of metal ions in capillary electrophoresis

The detection of alkali, alkaline earth and heavy metal ions with a high-voltage capacitively coupled contactless conductivity detector (HV-C(4)D) was investigated. Eight alkali, alkaline earth metal ions and ammonium could be separated in less than 4 min with detection limits in the order of 5 x 10(-8) M. The heavy metals Mn2+, Pb2+, Cd2+ Fe2+, Zn2+, Co2+, Cu2+ and Ni2+ could also be successfully resolved with a 10 mM 2-(N-morpholino)ethanesulfonic acid/DL-histidine (MES/His)-buffer. Zn2+, Co2+, Cu2+ and Ni2+ showed an indirect response. The detection limits for the heavy metals were determined to range from about 1 to 5 microM.     

低压离子分离-化学发光在线检测过渡金属离子

 研究了低压离子 (LPIC)分离 柱后鲁米诺化学发光 (CL)检测方法 ,并分离测定了Cu2 + ,Co2 + ,Cr3 + ,Fe2 + ,Mn2 + 等 5种过渡金属离子。以草酸 柠檬酸混合溶液作为洗脱液 ,Luminol H2 O2 Mn + 作为化学发光检测体系 ,对过渡金属离子进行在线检测。测定的线性范围分别为 (mg·L-1) :Co2 + ,0 0 0 1～ 0 .1;Cu2 + ,0 1～ 6 ;Mn2 + ,0 0 6～ 4 ;Fe2 + ,0 0 3～ 5 ;Cr3 + ,0 0 2 5～ 1。检测限分别为 (μg·L-1) :Co2 + ,0 85 ;Cu2 + ,85 ;Mn2 + ,4 2 ;Fe2 + ,2 1;Cr3 + ,2 0。     

On-column complexation of metal ions using 2,6-pyridinedicarboxylic acid and separation of their anionic complexes by capillary electrophoresis with direct UV detection

On-column complexation of metal ions with 2,6-pyridinedicarboxylate (2,6-PDC) to form anionic complexes enabled their separation by capillary zone electrophoresis with direct UV detection at 214 nm. Nine metal ions, Cu2+, Zn2+, Ni2+, Cd2+ Mn2+, Pb2+, Fe3+, Al3+ and Ca2+, were determined in less than 7 min using 10 mM 2.6-PDC solution containing 0.75 mM tetradecyltrimethylammonium bromide at pH 4.0. Satisfactory working ranges (20-300 microM), detection limits (3-10 microM) and good repeatability of the peak areas (RSD 2.1-4.2%, n=5) were obtained using hydrodynamic injection (30 s). The proposed method was used successfully for the determination of Mn2+, Fe3+, Al3+ and Ca2+ in groundwaters.     

Development of capillary electrophoresis for the determination of metal ions using mixed partial and complete complexation techniques

A new capillary electrophoretic (CE) method was developed for the selective and sensitive determination of common metal ions. The proposed method is based on conventional CE separation of metal cations followed by complete complexation of separated analytes with 1,10-phenanthroline using the zone-passing technique. This approach combines both partial and complete complexation modes and, thus, enables rapid, selective, efficient separation together with sensitive direct UV detection of metal species. The optimal conditions for the separation and derivatization reaction were established by varying type of electrolyte, electrolyte pH, introduction time and concentration of 1,10-phenanthroline. The optimized separations were carried out in 50 mmol l(-1) glycolic acid electrolyte (pH 6.0 with imidazole) using direct UV detection at 254 nm. Five common metal cations (Fe2+, Co2+, Ni2+, Cu2+ and Zn2+) were separated in less than 4 min. The proposed system was applied to the determination of Fe(II) and Zn(II) in snow samples. The recovery tests established for snow samples were within the range 100+/-12%.     

Second chemiluminescence behavior of Fe2+, Fe3+ and Cr3+ in the luminal-KMnO4 system.

A novel flow injection chemiluminescence (CL) method has been developed for the determination of three metal ions, namely Fe2+, Fe3+ and Cr3+, based on the second CL (SCL) signal of the mixture of luminal with KMnO4 in a sodium hydroxide medium by the catalysis of Fe2+, Fe3+ or Cr3+. The possible CL mechanism of the systems, the influencing factors, and the optimum conditions for the reactions were investigated based upon the kinetic curve of the CL reaction, CL spectra, UV-visible spectra and some other experiments. Under the optimum conditions, the SCL intensity was directly proportional to the concentration of these metal ions in solution in the range of 0.10 - 100.00 mg l(-1) for Fe(2+), 0.50 - 7.50 and 7.50 - 200.00 mg l(-1) for Fe3+, 0.01 - 0.25 and 0.25 - 10.00 mg l(-1) for Cr3+. The detection limits (3 sigma/s) were 9.87 x 10(-6) g l(-1), 2.71 x 10(-6) g l(-1) and 5.25 x 10(-7) g l(-1) for Fe2+, Fe3+ and Cr3+, respectively.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.     

UV-vis spectroscopic study of interaction of metal ions with the E(T)(30) dye involving micellar media

Interaction between 3d-transition metal ions (Mn2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+ and Zn2+) and the E(T)(30) dye, 2,6-diphenyl-4-(2,4,6-triphenyl 1-pyridino)phenolate in aqueous medium have been studied by distributing the dye between the aqueous and micellar phase formed by cationic surfactant cetyltrimethylammonium bromide(CTAB). Values of equilibrium constant K for the dye-metal ion interaction and the partition coefficient of the dye between the micellar and the aqueous phase have been determined. K values show a systematic correlation with ionic potential of metal ions.     

Separation and spectroscopic characterization of new metal chelates of 8-arylazo-6-formyl-7-hydroxy-5-methoxy-2-methyl chromones

Transition metal chelates of the title compounds have been prepared and characterized by elemental analyses, i.r., 1H-n.m.r., electronic spectra, thermogravimetric analysis, conductometric and magnetic measurements. Chelates of general formulae MLjX · nH2O for 1:1 (M:L), where X=OH– or Cl–, j=1 or 2, n=1– 4 and M=VO2+, Cr3+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+ and Zn2+ ions or ML2 for 1:2 (M:L) Ni-(1a), ML2·2H2O where M=Co2+, Ni2+ and Cu2+ or M2LjX·nH2O for 2:1 (M:L) Cr3+, Fe2+, Ni2+ and Cu2+, L=Ligand, have been prepared. I.r. and 1H-n.m.r. spectra indicate that the aldehydic group in position six and the hydroxylic group in position seven are involved in chelation in the 1:1 and 1:2 (M:L) chelates, whereas for 2:1 (M:L) chelates with (1c), the interaction of the metal ion takes place through CHO, OH, CO2H and NN groups. Tetrahedral, octahedral and square planar geometries are proposed for the chelates based on their electronic spectra and magnetic moments.     

A copper(II) ion-selective on-off-type fluoroionophore based on zinc porphyrin-dipyridylamino

A new copper(II) fluorescent sensor 5,10,15,20-tetra((p-N,N-bis(2-pyridyl)amino)phenyl)porphyrin zinc (1) has been designed and synthesized by the Ullmann-type condensation of bromoporphyrin zinc with 2,2'-dipyridylamine (dpa) under copper powder as a catalyst as well as with K2CO3 as the base in a DMF solution. It consists of two separately functional moieties: the zinc porphyrin performs as a fluorophore, and the dpa-linked-to-zinc porphyrin acts as a selected binding site for metal ions. It displays a high selectivity and antidisturbance for the Cu2+ ion among the metal ions examined (Na+, Mg2+, Cr3+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Ag+, Zn2+, Cd2+, Hg2+, and Fe3+) and exhibits fluorescence quenching upon the binding of the Cu2+ ion with an "on-off"-type fluoroionophoric switching property. The detection limit is found to be 3.3 x 10(-7) M (3s blank) for Cu2+ ion in methanol solution, and its fluorescence can be revived by the addition of EDTA disodium solution. The design strategy and remarkable photophysical properties of sensor 1 help to extend the development of fluorescent sensors for metal ions.     

过渡元素杂多钨硅酸盐氧化还原性质的研究

本文通过极谱和循环伏安法,结合紫外光谱和X射线光电子能谱,研究了过渡元素钨硅杂多酸盐Kn[SiM(H2O)W11O39](M=Mn^2^+,Fe^3^+,Co^2^+,Ni^2^+,Zn^2^+,Cd^2^+)在溶液中的氧化还原性质,提出了它们的还原机理.杂多阴离子的极谱半波还原电位E1/2的顺序为Ni^2^+>Co^2^+>Zn^2^+>Fe^2^+>Mn^2^+,发现杂多阴离子的E1/2与其组分中的过渡元素的电负性X和过渡金属离子与水合电子反应速率常数的对数logke-分别有线性关系,讨论了过渡元素对杂多阴离子氧化还原性的影响.     

浸渍硅胶薄层色谱板分离钴和镍及数字图像分析法定量(英文)

Thin layer chromatography(TLC) of cobalt and nickel has been performed on silica gel layers induced with alkali mediated cellulose extract.A novel combination of 10% aqueous solutions of Tween-20 and potassium thiocyanate in 1∶1(v/v) was identified as the best mobile phase for the selective separation of Co2+from Ni2+on the impregnated Silica Gel G layers.The chromatographic characteristics of the cations were studied and the limits of detection as well as the limits of quantification for Co2+and Ni2+were determined.The quantitative estimation of the cations was achieved from the digital image analysis of respective chromatograms.The proposed quantitative method was successfully applied with 0-0.50% error for the determination of Co2+from Ni2+in spiked samples of bauxite,soil and rock containing common cations such as Al3+,Fe2+,Ti4+,Zn2+,Mn2+,Cu2+,Cr6+,Mg2+,etc.under the optimized chromatographic conditions.     

螯合树脂研究 Ⅻ.以聚硫醚为主链的异丙巯基胺树脂的合成及其吸附性能

由聚环硫氟丙烷与多乙烯多胺反应制得的聚合物(PB)再与环硫丙烷反应,合成了四种以聚硫醚为主链的异丙巯基胺树脂(PBM_1-4)。树脂对Au~(3+)、Pd~(2+)、Pt~(4+)、Ag~+和Hg~(2+)等离子具有强的吸附能力,对Cu~(2+)次之,对Zn~(2+)和Pb~(2+)很弱。树脂对贵金属具有高的选择性,能从含Au~(3+)、Cr~(3+)、Co~(2+)、Ni~(2+)、Cu~(2+)、Mn~(2+)、Zn~(2+)和Fe~(3+)的溶液中定量吸附Au~(3+)而不吸附其它离子。     

FTIR, magnetic, 1H NMR spectral and thermal studies of some chelates of caproic acid: inhibitory effect on different kinds of bacteria

A convenient method for the preparation of complexes of the Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Zn2+, ZrO2+, UO2(2+), Zr4+ and Th4+ ions with caproic acid (Hcap) is reported and this has enabled 10 complexes of caproate anion to be formulated: [Cr(cap)3].5H2O, [Mn(cap)2(H2O)2], [Fe(cap)3].12H2O, [Co(cap)2(H2O)2].4H2O, [Ni(cap)2(H2O)2].3H2O, [Zn(cap)2], [ZrO(cap)2].3H2O, [UO2(cap)(NO3)], [Zr(cap)2(Cl)2] and [Th(cap)4]. These new complexes were synthesized and characterized by elemental analysis, molar conductivity, magnetic measurements, spectral methods (mid infrared, 1H NMR and UV-vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. It has been found from the elemental analysis as well as thermal studies that the caproate ligand behaves as bidentate ligand and forming chelates with 1:1 (metal:ligand) stoichiometry for UO2(2+), 1:2 for (Mn2+, Co2+, Ni2+, Zn2+, ZrO2+ and Zr4+), 1:3 stoichiometry for (Cr3+ and Fe3+) and 1:4 for Th4+ caproate complexes, respectively, as bidentate chelating. The molar conductance measurements proved that the caproate complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The antibacterial activity of the caproic acid and their complexes was evaluated against some gram positive/negative bacteria.     

Inorganic species in water and sediments of the Lamone and Marzeno rivers ecosystem

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Lamone and Marzeno rivers ecosystem. The species determined are Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Hg, F-, Cl- Br-, NO3-, SO4--, Na+, K+, Mg++, Ca++, NH4+ in superficial water, and Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (s(r)), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%.     

Study of metal ion labeling of the conformational and charge states of lysozyme by ion mobility mass spectrometry

The efficiency of Zn(2+), Cu(2+), Ni(2+), Co(2+), Fe(2+) or Mn(2+) labeling of the conformational and charge states of lysozyme was studied in H(2)O solvent at pH 2.5-6.8. Labeling of lysozyme was conducted with 50 M, 100 M and 500 M excess of the metal ion, resulting in the number of metal ions attached to lysozyme increasing two-fold over this range. At pH 6.2-6.8, Zn(2+), Cu(2+), Ni(2+), Co(2+) and Mn(2+) labeled the highly folded 7+ conformer and the 8+ and 9+ partially unfolded conformers of lysozyme with the same number of metal ion tags, with only Fe(2+) exhibiting no labeling. Lysozyme conserved its charge after metal ion labeling which shows at each charge state the divalent metal ion is replacing two protons. As the pH is lowered to 4.7-5.0 and 2.5-2.9, the labeling of lysozyme by Zn(2+), Cu(2+), Ni(2+), Co(2+) or Mn(2+) decreased in efficiency due to increased competition from protons for the aspartate and glutamate binding sites. The metal ions preferentially labeled the highly folded 7+ and partially unfolded 8+ conformers, but labeling decreased as the charge of lysozyme increased. In contrast to the other metal ions, Fe(2+) exhibited labeling of lysozyme only at the lowest pH of 2.8. At higher pH, the oxidation of Fe(2+) and formation of hydroxy-bridged complexes probably make the Fe(2+) unreactive towards lysozyme.     

Reactions of atomic transition-metal ions with long-chain alkanes

Understanding metal ion interactions with long-chain alkanes not only is of fundamental importance in the areas of organometallic chemistry, surface chemistry, and catalysis, but also has significant implication in mass spectrometry method development for the analysis of polyethylene. Polyethylene represents one of the most challenging classes of polymers to be analyzed by mass spectrometry. In this work, reactions of several transition-metal ions including Cr+, Mn+, Fe+, Co+, Ni+, Cu+, and Ag+ with long-chain alkanes, C28H58 and C36H74, are reported. A metal powder and the nonvolatile alkane are co-deposited onto a sample target of a laser desorption/ionization (LDI) time-of-flight mass spectrometer. The metal ions generated by LDI react with the vaporized alkane during desorption. It is found that all these metal ions can form adduct ions with the long-chain alkanes. Fe+, Co+, and Ni+ produce in-source fragment ions resulting from dehydrogenation and dealkylation of the adduct ions. The post-source decay (PSD) spectra of the metal-alkane adduct ions are recorded. It is shown that PSD of Ag+ alkane adduct ions produces bare metal ions only, suggesting weak binding between this metal ion and alkane. The PSD spectra of the Fe+, Co+, and Ni+ alkane adduct ions display extensive fragmentation. Fragment ions are also observed in the PSD spectra of Cr+, Mn+, and Cu+ alkane adduct ions. The high reactivity of Fe+, Co+, and Ni+ is consistent with that observed in small alkane systems. The unusually high reactivity of Cr+, Mn+, and Cu+ is rationalized by a reaction scheme where a long-chain alkane first forms a complex with a metal ion via ion/induced dipole interactions. If sufficient internal energy is gained during the complex formation, metal ions can be inserted into C-H and C-C bonds of the alkane, followed by fragmentation. The thermal energy of the neutral alkane is believed to be the main source of the internal energy acquired in the complex. Finally, the implication of this work on mass spectrometry method development for polyethylene analysis is discussed.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Senio river ecosystem: characterization and distribution of inorganic species in water and sediments

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Senio river ecosystem. The species determined are Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg, F-, Cl-, Br, NO3-, SO4-, Na+, K+, Ca++, Mg++, NH4+ in integrated water, and Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (sr), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%. Limitedly to Cu, Pb, Cd and Zn a critical comparison with voltammetric measurements is also discussed.     

Removal of metal ions from aqueous solution by adsorption on the natural adsorbent CACMM2.

The adsorption of Cd2+, Cr3+, Cu2+, Fe3+, Ni2+, Pb2+ and Zn2+ from aqueous solution was used to study the sorption properties of the adsorbent CACMM2 extracted from a cactus. Quantitation of the cation concentrations was performed by HPLC with diode array detection using on-column complex formation with 8-hydroxyquinoline. Removal degree from 100 mg M(n+) l(-1) solutions followed the series: Cu>Cd>Fe>Ni>Cr>Zn. Henry and Freundlich constants were determined since adsorption did not reach saturation plateaux in the studied concentration interval. Sorption of chromium by CACMM2 was stronger than the sorption onto lignin, calcium oxalate and cellulose up to 1,000 mg Cr3+ l(-1). Copper and iron were desorbed to a greater extent, while lead adsorption was practically irreversible. CACMM2 was able to remove more than 83% of chromate in a freshly prepared and exhausted chromate commercial solution.     

A tryptophan-containing fluoroionophore sensor with high sensitivity to and selectivity for lead ion in water

We report herein a fluoroionophore sensor derivated from tryptophan that shows high sensitivity (detection limit up to 0.15 microM) and specific selectivity for lead ion (Pb2+) over Ca2+, Cd2+, Co2+, Cr3+, Cu2+, K+, Mg2+, Na+, Fe2+, Mn2+, Ni2+ and Zn2+ in aqueous solution.