Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Guanidinate derivatives of rare-earth metals. The synthesis, properties, and molecular structures of the complexes {(Me3Si)2NC(NPri)2}3Nd, {(Me3Si)2NC(NCy)2}3Lu, and {(Me3Si)2NC(NPri)2}2HC(NPri)2}Nd

The reactions of anhydrous LnCl₃ (Ln = Nd or Lu) with three equivalents of {(Me₃Si)₂NC(NR)₂}Li (R = Prⁱ or Cy; Cy is cyclohexyl) in THF afforded the corresponding tris(guanidinate) derivatives of lanthanides {(Me₃Si)₂NC(NR)₂}₃Ln (Ln = Nd, R = Prⁱ, (1); Ln = Lu, R = Cy (2)), which were isolated after the recrystallization from hexane in 82 and 88% yields, respectively. The complex {(Me₃Si)₂NC(NCy)₂}₂{HC(NCy)₂}Nd (3) containing two guanidinate ligands and one formamidinate ligand was isolated in attempting to synthesize the bis(guanidinate) borohydride derivative by the reaction of {(Me₃Si)₂NC(N-Cy)₂}Na with Nd(BH₄)₃(THF)₂ (in a molar ratio of 2: 1) in THF. This complex is apparently formed as a result of the fragmentation and redistribution of the guanidinate ligands. The X-ray diffraction study showed that in the crystalline state compounds 1–3 are mononuclear complexes containing no coordinated Lewis bases.     

Anticancer activity of new organo-ruthenium, rhodium and iridium complexes containing the 2-(pyridine-2-yl)thiazole N,N-chelating ligand

The dinuclear dichloro complexes [(η⁶-arene)₂Ru₂(μ-Cl)₂Cl₂] and [(η⁵-C₅Me₅)₂M₂(μ-Cl)₂Cl₂] react with 2-(pyridine-2-yl)thiazole (pyTz) to afford the cationic complexes [(η⁶-arene)Ru(pyTz)Cl]⁺ (arene = C₆H₆1, p-ⁱPrC₆H₄Me 2 or C₆Me₆3) and [(η⁵-C₅Me₅)M(pyTz)Cl]⁺ (M = Rh 4 or Ir 5), isolated as the chloride salts. The reaction of 2 and 3 with SnCl₂ leads to the dinuclear heterometallic trichlorostannyl derivatives [(η⁶-p-ⁱPrC₆H₄Me)Ru(pyTz)(SnCl₃)]⁺ (6) and [(η⁶-C₆Me₆)Ru(pyTz)(SnCl₃)]⁺ (7), respectively, also isolated as the chloride salts. The molecular structures of 4, 5 and 7 have been established by single-crystal X-ray structure analyses of the corresponding hexafluorophosphate salts. The in vitro anticancer activities of the metal complexes on human ovarian cancer cell lines A2780 and A2780cisR (cisplatin-resistant), as well as their interactions with plasmid DNA and the model protein ubiquitin, have been investigated.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Silylated gallium and indium chalcogenide ring systems as potential precursors to ME (E=O, S) materials

The reaction of R₃M (M=Ga, In) with HESiR′₃ (E=O, S; R′₃=Ph₃, ⁱPr₃, Et₃, ^tBuMe₂) leads to the formation of (Me₂GaOSiPh₃)₂ (1); (Me₂GaOSi^tBuMe₂)₂ (2); (Me₂GaOSiEt₃)₂ (3); (Me₂InOSiPh₃)₂ (4); (Me₂InOSi^tBuMe₂)₂ (5); (Me₂InOSiEt₃)₂ (6); (Me₂GaSSiPh₃)₂ (7); (Et₂GaSSiPh₃)₂ (8); (Me₂GaSSiⁱPr₃)₂ (9); (Et₂GaSSiⁱPr₃)₂ (10); (Me₂InSSiPh₃)₃ (11); (Me₂InSSiⁱPr₃)_n (12), in high yields at room temperature. The compounds have been characterized by multinuclear NMR and in most cases by X-ray crystallography. The molecular structures of (1), (4), (7) and (8) have been determined. Compounds (3), (6) and (10) are liquids at room temperature. In the solid state, (1), (4), (7) and (9) are dimers with central core of the dimer being composed of a M₂E₂ four-membered ring. VT-NMR studies of (7) show facile redistribution between four- and six-membered rings in solution. The thermal decomposition of (1)–(12) was examined by TGA and range from 200 to 350°C. Bulk pyrolysis of (1) and (2) led to the formation of Ga₂O₃; (4) and (5) In metal; (7)–(10) GaS and (11)–(12) InS powders, respectively.      

Mono and dinuclear complexes of half-sandwich platinum group metals (Ru, Rh and Ir) bearing a flexible pyridyl-thiazole multidentate donor ligand

The mononuclear cationic complexes [(η⁶-C₆H₆)RuCl(L)]⁺ (1), [(η⁶-p-ⁱPrC₆H₄Me)RuCl(L)]⁺ (2), [(η⁵-C₅H₅)Ru(PPh₃)(L)]⁺ (3), [(η⁵-C₅Me₅)Ru(PPh₃)(L)]⁺ (4), [(η⁵-C₅Me₅)RhCl(L)]⁺ (5), [(η⁵-C₅Me₅)IrCl(L)]⁺ (6) as well as the dinuclear dicationic complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (7), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (8), [{(η⁵-C₅H₅)Ru(PPh₃)}2(L)]²⁺ (9), [{(η⁵-C₅Me₅)Ru(PPh₃)}₂(L)]²⁺ (10), [{(η⁵-C₅Me₅)RhCl}₂(L)]²⁺ (11) and [{(η⁵-C₅Me₅)IrCl}₂(L)]²⁺ (12) have been synthesized from 4,4′-bis(2-pyridyl-4-thiazole) (L) and the corresponding complexes [(η⁶-C₆H₆)Ru(μ-Cl)Cl]₂, [(η⁶-p-ⁱPrC₆H₄Me)Ru(μ-Cl)Cl]₂, [(η⁵-C₅H₅)Ru(PPh₃)₂Cl)], [(η⁵-C₅Me₅)Ru(PPh₃)₂Cl], [(η⁵-C₅Me₅)Rh(μ-Cl)Cl]₂ and [(η⁵-C₅Me₅)Ir(μ-Cl)Cl]₂, respectively. All complexes were isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV-vis spectroscopy. The X-ray crystal structure analyses of [3]PF₆, [5]PF₆, [8](PF₆)₂ and [12](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with a five-membered metallo-cycle in which 4,4′-bis(2-pyridyl-4-thiazole) acts as a N,N′-chelating ligand.     

Ferrocene bridged and substituted tetramethylcyclopentadienyl (or indenyl) carbonyl complexes of iron, ruthenium, and molybdenum

Reactions of ferrocene bridged and substituted tetramethylcyclopentadiene ligands 1,1′-Fc(C₅Me₄H)₂ (1) (Fc = 1,1′-ferrocenediyl) and (C₅H₅FeC₅H₄)C₅Me₄H (5) with Ru₃(CO)₁₂, Fe(CO)₅, and Mo(CO)₃(CH₃CN)₃ in refluxing xylene gave the corresponding trinuclear and tetranuclear complexes Fc[(C₅Me₄)M(CO)]₂(μ-CO)]₂ [M = Ru (2), Fe (3)], Fc[(C₅Me₄)Mo(CO)₃]₂ (4) and [(C₅H₅ FeC₅H₄)C₅Me₄M(CO)]₂(μ-CO)₂ [M = Ru (6), Fe (7)], [(C₅H₅FeC₅H₄)C₅Me₄Mo(CO)₃]₂ (8). Reactions of (3-indenyl)ferrocene (9) with Ru₃(CO)₁₂ or Fe(CO)₅ in refluxing xylene or heptane, also gave the corresponding tetranuclear metal complexes [(C₅H₅FeC₅H₄)C₉H₆M(CO)]₂(μ-CO)₂ [M = Ru (10), Fe (11)]. The molecular structures of 2 and 3 were determined by X-ray diffraction analysis.     

Ruthenium Tris(pyrazolyl)borate Complexes. Part 20 [1]. Synthesis,Characterization, and Reactivity of Neutral Trispyrazolylborate Ruthenium Vinylidene Complexes

Summary. The reaction of RuTp(COD)Cl (1) with PPh₂Prⁱ and terminal alkynes HCCR (R=C₆H₅, C₄H₃S, C₆H₄OMe, Fc, C₆H₄–Fc, C₆H₉) affords the neutral vinylidene complexes RuTp(PPh₂Prⁱ) (Cl)(=C=CHR) (2a–2f) in high yields. These complexes do not react with MeOH to give methoxy carbene complexes of the type RuTp(PPh₂Prⁱ)(Cl)(=C(OMe)CH₂R), but react with oxygen to yield the CO complex RuTp(PPh₂R)(Cl)(CO) (3). The structures of 2b, 2f, and 3 have been determined by X-ray crystallography.     

Synthesis, structural characterization and reactivity of new tin bridged ansa-bis(cyclopentadiene) compounds: X-ray crystal structures of Me2Sn(C5Me4R-1)2 (R = H, SiMe3)

The organo-tin compounds, Me₂Sn(C₅H₄R-1)₂ (R = Me (1), Prⁱ (2), Bu^t (3), SiMe₃ (4)) and Me₂Sn(C₅Me₄R-1)₂ (R = H (5), SiMe₃ (6)), were prepared by the reaction of Me₂SnCl₂ with the lithium or sodium derivative of the corresponding cyclopentadiene. Compounds 1-6 have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn). In addition the molecular structures of 5 and 6 were determined by single crystal X-ray diffraction studies. The transmetalation reaction of 1-6 with ZrCl₄ or [NbCl₄(THF)₂] gave the corresponding metallocene complexes in high yields.     

Synthesis and structure of isopropyldimethylsilyl-substituted octamethyltitanocene

Reduction of isopropyldimethylsilyl-substituted titanocene dichloride [TiCl₂(η⁵-C₅Me₄SiMe₂Prⁱ)₂] (1) by excess magnesium in the presence of excess bis(trimethylsilyl)ethyne (btmse) in tetrahydrofuran at 60 °C yielded a mixture of products amongst them only the trinuclear Ti-Mg-Ti hydrido-bridged complex Mg[Ti(μ-H)₂(η⁵-C₅Me₄SiMe₂Prⁱ)]₂ (3) was isolated and characterized. The precursor of titanocene, [Ti(η⁵-C₅Me₄SiMe₂Prⁱ)₂(η²-btmse)] (6), was obtained from the identical system which, after initial formation of [TiCl(η⁵-C₅Me₄SiMe₂Prⁱ)₂] (2), reacted at −18 °C overnight and then the solution was rapidly separated from the remaining magnesium. Titanocene [Ti(η⁵-C₅Me₄SiMe₂Prⁱ)₂] (7) was obtained by thermolysis of 6 at 75 °C in vacuum. Crystal structures of 1, 2, 3, 6, and 7 were determined.     

Ruthenium Tris(pyrazolyl)borate Complexes. Part 20 [1]. Synthesis, Characterization, and Reactivity of Neutral Trispyrazolylborate Ruthenium Vinylidene Complexes

The reaction of RuTp(COD)Cl (1) with PPh₂Prⁱ and terminal alkynes HCCR (R=C₆H₅, C₄H₃S, C₆H₄OMe, Fc, C₆H₄–Fc, C₆H₉) affords the neutral vinylidene complexes RuTp(PPh₂Prⁱ) (Cl)(=C=CHR) (2a–2f) in high yields. These complexes do not react with MeOH to give methoxy carbene complexes of the type RuTp(PPh₂Prⁱ)(Cl)(=C(OMe)CH₂R), but react with oxygen to yield the CO complex RuTp(PPh₂R)(Cl)(CO) (3). The structures of 2b, 2f, and 3 have been determined by X-ray crystallography.     

Ruthenium-based bioconjugates: Synthesis and X-ray structure of the mixed ligand sandwich compound RuCp(p-(CO2H)C6H4Tp) and labelling of amino acids and the neuropeptide enkephalin

Four differently substituted mixed ligand sandwich complexes CpRu(p-BrC₆H₄)Tp (3), CpRu(p-BrC₆H₄)Tp^Me (4), Cp^∗Ru(p-BrC₆H₄)Tp (5), Cp^iPrRu(p-BrC₆H₄)Tp (6), incorporating cyclopentadienyl (Cp) and functionalized tris(pyrazolyl)borate (Tp) ligands, have been synthesized and characterized. Air-stable 6 has been converted to benzoic acid-functionalized Cp^iPrRu(p-(CO₂H)C₆H₄)Tp (7), which has been structurally characterized in the solid state by X-ray diffraction. Compound 7 may be readily coupled to biomolecules as exemplified by the coupling to phenylalanine-methylester to give Cp^iPrRu(p-(CO-Phe-OMe)C₆H₄Tp) (8). In a solid phase peptide synthesis (SPPS), 7 has been coupled to the pentapeptide Enkephalin, to provide Cp^iPrRu(p-(CO-Tyr-Gly-Gly-Phe-Leu-OH)C₆H₄Tp) (9) as the first example of a mixed ligand sandwich ruthenium bioconjugate.     

Syntheses and characterization of η 5-pentamethylcyclopentadienyl rhodium(III) and iridium(III) complexes containing polypyridyls

Reaction of [(η ⁵-C₅Me₅)M(μ-Cl)Cl]₂ {M?=?Rh (1), Ir (2)} and [(η ⁵-C₅Me₅)MCl₂(DBT)] (DBT?=?dibenzothiophene) {M?=?Rh (3), Ir (4)} with polypyridyl ligands 2,3-bis(2-pyridyl)pyrazine (bpp), 2,3-bis(2-pyridyl)quinoxaline (bpq), 1,3,5-tris(2-pyridyl)-2,4,6-triazine (tptz), 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) and 4′-pyridyl-2,2′:6′,2′′-terpyridine (py-terpy) results in the formation of mononuclear cationic complexes, [(η ⁵-C₅Me₅)MCl(poly-py)]⁺ (poly-py?=?polypyridyl ligand). The complexes were isolated as hexafluorophosphate salts and characterized by IR and NMR spectroscopy.     

Three-coordinate bis(phosphinimino)methanide derivatives of ‘open shell’ [M(II)] (M = Mn, Fe, Co) transition metals

An alternative two-step synthesis of the previously reported bis(diphenylphosphinimino)methane [CH₂(Ph₂P = NC₆H₃ⁱPr₂-2,6)₂] involving bromine oxidation of dppm and metathesis with 2,6-diisopropylaniline is described. [CH₂(Ph₂PNC₆H₃ⁱPr₂-2,6)₂] is readily deprotonated by the transition metal silylamides [M{N(SiMe₃)₂}₂] (M = Mn, Fe and Co) to provide a series of exclusively three-coordinate derivatives [{CH(Ph₂PNC₆H₃ⁱPr₂-2,6)₂M{N(SiMe₃)₂}] which have been characterised by elemental analysis, magnetic measurements and, in the case of the Fe derivative, X-ray structural analysis. Reactivity studies have shown that even such sterically demanding bis(phosphinimino)methanide ligands are prone to protonolysis and reductive [P(V) to P(III)] degradation which limits their utility as stable platforms for further M(II) derivitisation.     

Guanidinate borohydride derivatives of lanthanides: synthesis and molecular structures of the [(Me3Si)2NC(NCy)2]Gd(BH4)2DME and [{(Me3Si)2NC(NPri)2}2Sm(BH4)2]−[Li(DME)3]+ complexes. Catalytic activity of the [(Me3Si)2NC(NCy)2]2Ln(BH4)2Li(THF)2 complexes (Ln = Nd, Sm, or Yb) in methyl methacrylate polymerization

The reaction of Gd(BH₄)₃(THF)₂ with two equivalents of sodium N,N′-dicyclohexyl-N″-bis(trimethylsilyl)guanidinate in THF followed by the treatment of the reaction product with 1,2-dimethoxyethane produced the monoguanidinate bis(borohydride) complex [(Me₃Si)₂NC(NCy)₂]Gd(BH₄)₂DME (1) (Cy is cyclohexyl). The treatment of the heterobimetallic samarium complex {(Me₃Si)₂NC(NPrⁱ)₂}₂Sm(BH₄)₂Li(THF)₂, in which the lanthanide and lithium atoms are linked by two bridging borohydride groups, with 1,2-dimethoxyethane afforded the ionic complex [{(Me₃Si)₂NC(NPrⁱ)₂}₂Sm(BH₄)₂]^?[Li(DME)₃]⁺ (2). The structures of complexes 1 and 2 were established by X-ray diffraction. The [(Me₃Si)₂NC(NCy)₂]₂Ln(BH₄)₂Li(THF)₂ complexes (Ln = Nd (3), Sm (4), or Yb (5)) were found to catalyze methyl methacrylate polymerization.     

Reaktive E = C(p-p)π-Systeme. XLII [1]. Neue Koordinationsverbindungen des 2-(Diisopropylamino)-1-phosphaethins: [{η4-(iPr2NCP)2}Ni{η2-(iPr2NCP)}], [(Ph3P)2Pt{η2-(iPr2NCP)}] und [Co2(CO)6{η2-η2-(iPr2NCP)}]

Reactive E = C(pp)π-Systems. XLII [1]. Novel Coordination Compounds of 2-(Diisopropylamino)-1-phosphaethyne: [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}], [(Ph₃P)₂Pt{η²-(iPr₂NCP)}], and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] 2-(Diisopropylamino)-phosphaethyne iPr₂N? C?P ( 2 ) reacts with the Ni(0)-complexes [Ni(1,5-cyclooctadiene)₂] and [Ni(CO)₃(1-azabicyclo[2.2.2]octane)], respectively, to give the novel complex [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}] ( 5 ), with the 1,3-diphosphacyclobutadiene derivative and 2 (side-on) as π-ligands. The molecular structure of 5 determined by X-ray diffraction on single crystals proves the spin systems and rotational barriers deduced from NMR-data (¹H, ¹³C-, ³¹P). The PC distances of the four-membered ring of 1.817(2) and 1.818(2) Å – as expected – are considerably longer than the PC bond of the η²-coordinated phosphaalkyne 2 [1.671(2) Å]. – In the reactions of 2 with [(Ph₃P)₂Pt(C₂H₄)] or [Co₂(CO)₈] the ligand properties of 2 resemble those of alkynes affording the complexes [(Ph₃P)₂Pt{η²-(iPr₂NCP)}] ( 7 ) with side-on coordinated 2 and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] with 2 acting as a 4e donor bridge in quantitative yield. In attempts to prepare copper(I) complexes of the aminophosphaalkyne 2 by reaction with CuCl or CuI the only isolable product formed in reasonable amounts under the influence of air and moisture is the 1 λ³, 3 λ⁵-diphosphetene (iPr₂N) ( 10 ) (isolated yield: ca. 20%). The crystal structure analysis of 10 indicates a strong structural relationship to the diamino-2-phosphaallyl cation [Me(iPr₂N)]⁺ ( 12 ), the 1,3-diphosphacyclobutadiene ligand (iPr₂NCP)₂ in the binuclear complex [{η¹, μ²-(iPr₂NCP)₂}Ni₂(CO)₆] ( 3a ) as well as to the heterocycles (dme)₂LiOE₂′ (E′ = S, 11a ; E′ = Se, 11b ) prepared by Becker et al. [11b, 35].     

A mechanistic investigation of (Me3Si)3SiH oxidation

The interaction of (Me₃Si)₃SiH with O₂ is known to afford (Me₃SiO)₂Si(H)SiMe₃ in which the two oxygen atoms arise from the same oxygen molecule. In order to investigate the mechanism of this unusual reaction, the oxidation rates were measured in the temperature range 30-70 °C by following oxygen uptake in the presence and absence of hydroquinone as inhibitor. The rate constant for the spontaneous reaction of (Me₃Si)₃SiH with O₂ was determined at 70 °C to be ∼3.5 × 10⁻⁵ M⁻¹ s⁻¹. A sequence of the propagation steps is proposed by combining the previous and present experimental findings with some theoretical results obtained at the semiempirical level. These calculations showed that the silylperoxyl radical (Me₃Si)₃SiOO undergoes three consecutive unimolecular steps to give (Me₃SiO)₂Si()SiMe₃. Evidence has been obtained that the rate determining step is the rearrangement of silylperoxyl radical to a dioxirand-like pentacoordinated silyl radical. Our findings are of considerable importance for the understanding of the oxidation of hydrogen-terminated silicon surfaces.     

Au(I) and Au(III) complexes of a sterically bulky benzimidazole-derived N-heterocyclic carbene

The reaction of [AuCl(SMe₂)] with in situ generated [AgCl(ⁱPr₂-bimy)] (ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene), which in turn was obtained by the reaction of Ag₂O with 1,3-diisopropylbenzimidazolium bromide (ⁱPr₂-bimyH⁺Br⁻, A), afforded the monocarbene Au(I) complex [AuCl(ⁱPr₂-bimy)] (1). Subsequent reaction of 1 and the ligand precursor ⁱPr₂-bimyH⁺BF₄⁻, (B) in acetone in the presence of K₂CO₃ yielded the bis(carbene) complex [Au(ⁱPr₂-bimy)₂]BF₄ (2) as a white powder in 80% yield. The oxidative addition of elemental iodine to complex 2 gave the bis(carbene) Au(III) complex trans-[AuI₂(ⁱPr₂-bimy)₂]BF₄ (3) as an orange-red powder in 92% yield. All complexes 1-3 have been fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry, elemental analysis, and X-ray single crystal diffraction. Complexes 1 and 2 adopt a linear geometry around metal centers as expected for d¹⁰ metals. The geometry around the Au(III) metal center in 3 is essentially square-planar with two carbene ligands in trans-position to each other. Complex 3 shows absorption and photoluminescence properties owing to a ligand to metal charge transfer.     

1,2-Diphosphaferrocene als Liganden in Übergangsmetallkomplexen. Röntgenstrukturanalyse von [(η5-1,3-tBu2C5H3){η5-1,2-[Co2(CO)6]-3,4-(Me3SiO)2-5-(Me3Si)P2C3}]

1,2-Diphosphaferrocenes as Ligands in Transition Metal Complexes. X-Ray Structure Analysis of [(η⁵-1,3-tBu₂C₅H₃){η⁵-1,2-[Co₂(CO)₆]-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}] Reaction of metallo-1,2-diphosphapropene (η⁵-tBuC₅H₄)(CO)₂Fe? P(SiMe₃)? P?C(SiMe₃)₂ with (Z-cyclooctene)Cr(CO)₅ afforded the pentacarbonylchromium adduct of a 1,2-diphosphaferrocene [(η⁵-tBuC₅C₅H₄){η⁵-1-[Cr(CO)₅]-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 1 c ). Diphosphaferrocene [(η⁵-tBuC₅H₄){η⁵-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 2 c ) was formed when (η⁵-tBuC₅H₄)(CO)₂FeBr was treated with (Me₃Si)₂P? P?C(SiMe₃)₂ in toluene at 60°C. Photolysis of molybdenum- and tungsten hexacarbonyl in the presence of [(η⁵-1,3-tBu₂C₅H₃){η⁵-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 2 b ) gave the pentacarbonylmetal adducts 8 (M = Mo) and 9 (M = W), respectively. A corresponding manganese derivative resulted from the photochemical reaction of 2 b and (MeC₅H₄)Mn(CO)₃. Treatment of 2 b with Co₂(CO)₈ yielded trinuclear [(η⁵-1,3-tBu₂C₅H₃){η⁵-1,2-[Co₂(CO)₆]-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 11 ). Constitution and configuration of compounds 1 c, 2 c, 8 – 11 were determined by elemental analyses and spectra (IR, ¹H-, ¹³C-, ³¹P-NMR, MS). In addition the molecular structure of 11 was established by single crystal X-ray analysis.