Determination of human and Sprague-Dawley rat trimethylselenonium ion and total selenium urine concentrations from endogenous body selenium pool by neutron activation analysis

This study determined trimethylselenonium ion [TMSe, (CH₃)₃Se⁺] and total organic selenium cationic species urinary excretion values for healthy human subjects and Sprague-Dawley rats fed regular diets. The only source of TMSe was from the endogenous selenium body pool. Total selenium concentration, in urine was determined by instrumental neutron activation analysis. TMSe and total selenium cationic species concentrations and percent of total selenium urine excretion were determined by chemical neutron activation analysis and coupled anion-cation exchange chromatography and anion-exchange chromatography, respectively. Within experimental error, mean values for TMSe and cationic species as percent selenium were comparable for both human subjects and Sprague-Dawley rats. This study suggested that TMSe excreted in urine by healthy human subjects and Sprague-Dawley rats fed a normal diet is not a minor but a general metabolite of selenium ingested in a normal diet.     

Marked individual variability in the levels of trimethylselenonium ion in human urine determined by HPLC/ICPMS and HPLC/vapor generation/ICPMS

Selenium species were determined using HPLC/ICPMS and HPLC/vapor generation/ICPMS in the urine from seven human volunteers investigated at background selenium concentrations and at slightly elevated concentrations after ingestion of 200 μg Se as a selenite supplement. Trimethylselenonium ion (TMSe) was present, together with selenosugars, in the urine samples, a result that dispels recent doubts about its possible previous misidentification with a cationic selenosugar. Although TMSe was present as only a trace metabolite in urine from five of the seven volunteers (0.02–0.28 μg Se/L, equivalent to 1–5% of the sum of selenosugars and TMSe), it was a significant metabolite (up to 4.6 μg Se/L, 22%) in one volunteer, and it was the major identified metabolite (up to 15 μg Se/L, 53%) in another volunteer. This marked individual variability in the formation of TMSe was maintained in a duplicate investigation of urine from the same seven volunteers.     

Sensitivities of selenite, selenate, selenomethionine and trimethylselenonium ion in aqueous solution and in blood plasma-ETAAS compared with ICP-MS

Aqueous solutions and blood plasma spiked with selenite (Se(IV)), selenate (Se(VI)), selenomethionine (SeMet) or trimethylselenonium (TMSe) iodide were analyzed by Zeeman-corrected electrothermal atomic absorption spectrometry (ETAAS) using palladium as a chemical modifier, and by inductively coupled plasma mass spectrometry (ICP-MS). Using ETAAS, the sensitivities for Se(IV), SeMet and TMSe in aqueous solution were similar, whereas the sensitivity of Se(VI) was 63% of that value. In blood plasma, the ETAAS sensitivities of Se(IV) and Se(VI) were equal, whereas the sensitivities of SeMet and TMSe were 87 and 56%, respectively, of that value. In contrast, the ICP-MS sensitivities obtained for Se(VI), TMSe and SeMet were between 96 and 98% of that obtained for Se(IV) in aqueous solution and in blood plasma. It is concluded, that ICP-MS is superior to ETAAS as the problem of differences in sensitivity of the selenium species when using ETAAS are not prevalent when using the ICP-MS technique.     

HPLC-ICP-MS或HPLC-FAAS法分离测定硒化合物（英文）

 提出了一种用高效液相色谱（HPLC）分离和用电感偶合等离子体质谱仪（ICP－MS）或火焰原子吸收光谱仪（FAAS）作元素专一检测器在线测定硒的化学形态的方法。在优化的HPLC条件下,用ESAⅢ阴离子色谱柱（250mm×4．6mm）,以柠檬酸铵为流动相（5．5mmol／L,pH5．5,流速1．5mL／min）,进样量100μL,分离和测定三甲基硒离子、硒代蛋氨酸、亚硒酸和硒酸盐只需8min。HPLC－FAAS在线分析4种硒化合物的检测限为p（Se）=1mg／L。     

Separation and Concentration of the Trimethylselenonium Ion for Its Determination in Urine by Graphite Furnace Atomic Absorption Spectrometry

The separation and concentration methods for the trimethylselenonium ion (TMSe) in urine samples were developed utilizing the formation of the ion pair of TMSe with tetrakis(4-fluorophenyl)borate. The ion pair could be quantitatively collected by a solvent extraction technique as well as a cellulose nitrate (CN) filter collection technique. The collected TMSe was determined by graphite furnace atomic absorption spectrometry with the addition of palladium as a matrix modifier. In the case of urine analysis for TMSe, the CN filter technique gave better reproducibility than the solvent extraction technique. The detection limit of this method for TMSe was 1 ngSe/ml for 20 ml of urine sample.     

Speciation of metabolites of selenate in rats by HPLC-ICP-MS

The metabolic pathway for and metabolites of selenium (Se) administered intravenously to rats in the form of selenate at a dose of 0.3 mg Se kg-1 body weight were studied by speciating Se in the bloodstream, liver and urine by HPLC-inductively coupled argon plasma mass spectrometry. Selenate was not taken up by red blood cells (RBCs) and disappeared from the bloodstream much faster than selenite, without any change in its chemical form before it disappeared from the plasma. Selenium excreted into the urine after the administration of selenate showed different patterns from those of selenite in both amounts and chemical forms. With the selenate group, the concentration of Se in urine was highest at 0-6 h and the chemical species of Se was selenate at 0-6 h; thereafter a monomethylselenol-related Se compound (MMSe*) and trimethylselenonium ions (TMSe) appeared, selenate not being excreted after 6 h. On the other hand, in the selenite group, the concentration of Se peaked at 6-12 h, and the chemical species of Se were MMSe* and TMSe. Selenate was reduced in vitro on incubation in either a liver homogenate or supernatant fraction, although much more slowly than in the whole body. Selenate was not reduced by glutathione or dithiothreitol. The results suggest that in contrast to selenite, which is taken up by and reduced in RBCs, and then transferred to the liver, approximately 20% of the selenate administered to rats was excreted into the urine without any change in its chemical form with the present dose, and the major portion of selenate was taken up by the liver, reduced and then utilized for the synthesis of selenoproteins or excreted into the urine after being methylated.     

Speciation of selenium compounds with ion-pair reversed-phase liquid chromatography using inductively coupled plasma mass spectrometry as element-specific detection

For selenium speciation analysis, the hyphenation of chromatographic separation with element-specific detection has proved a useful technique. A powerful separation system, which is capable of resolving several biologically and environmentally important selenium compounds in a single column, is greatly needed. However, that has been difficult to achieve. In this paper eight selenium compounds, namely, selenite [Se(IV)], selenate [Se(VI)], selenocystine (SeCys), selenourea (SeUr), selenomethionine (SeMet), selenoethionine (SeEt), selenocystamine (SeCM) and trimethylselenonium ion (TMSe+), were separated by using mixed ion-pair reagents containing 2.5 mM sodium 1-butanesulfonate and 8 mM tetramethylammonium hydroxide as a mobile phase. The separation of these anionic, cationic and neutral organic selenium compounds on a LiChrosorb RP18 reversed-phase column took only 18 min at a flow-rate of 1.0 ml/min with isocratic elution, and baseline separation among the six organic Se compounds was achieved. Inductively coupled plasma mass spectrometry (ICP-MS) was employed as element-specific detection. A comparison of ICP-MS signal intensity obtained with a Barbington-type nebulizer and with an ultrasonic nebulizer (USN) was made. Different signal enhancement factors were observed for the various selenium compounds when a USN was used. The speciation technique was successfully applied to the study on chemical forms of selenium in a selenium nutritional supplement. Selenomethionine was found to be the predominant constituent of selenium in the supplement.     

Application of multivariate techniques in the optimization of a procedure for the determination of bioavailable concentrations of Se and As in estuarine sediments by ICP OES using a concomitant metals analyzer as a hydride generator

A procedure has been developed for the determination of bioavailable concentrations of selenium and arsenic in estuarine sediments employing inductively coupled plasma optical emission spectrometry (ICP OES) using a concomitant metals analyzer device to perform hydride generation. The optimization of hydride generation was done in two steps: using a two-level factorial design for preliminary evaluation of studied factors and a Doehlert design to assess the optimal experimental conditions for analysis. Interferences of transition metallic ions (Cd²⁺, Co²⁺, Cu²⁺, Fe³⁺ and Ni²⁺) to selenium and arsenic signals were minimized by using higher hydrochloric acid concentrations. In this way, the procedure allowed the determination of selenium and arsenic in sediments with a detection limit of 25 and 30 μg kg⁻¹, respectively, assuming a 50-fold sample dilution (0.5 g sample extraction to 25 mL sample final volume). The precision, expressed as a relative standard deviation (% RSD, n = 10), was 0.2% for both selenium and arsenic in 200 μg L⁻¹ solutions, which corresponds to 10 μg g⁻¹ in sediment samples after acid extraction. Applying the proposed procedure, a linear range of 0.08-10 and 0.10-10 μg g⁻¹ was obtained for selenium and arsenic, respectively. The developed procedure was validated by the analysis of two certified reference materials: industrial sludge (NIST 2782) and river sediment (NIST 8704). The results were in agreement with the certified values. The developed procedure was applied to evaluate the bioavailability of both elements in four sediment certified reference materials, in which there are not certified values for bioavailable fractions, and also in estuarine sediment samples collected in several sites of Guanabara Bay, an impacted environment in Rio de Janeiro, Brazil.     

Speciation of inorganic selenium in environmental water samples by inductively coupled plasma optical emission spectrometry after preconcentration by using a mesoporous zirconia coating on coal cinder

A simple, novel, and selective flow‐injection solid‐phase extraction with inductively coupled plasma optical emission spectrometry method was developed for the speciation of inorganic selenium in environmental water samples. A mesoporous zirconia film was simply introduced to coat coal cinder by means of the sol–gel technique, and the adsorptive performance of the coated material for Se(IV)/Se(VI) was investigated in different media. Both Se(IV) and Se(VI) can be retained quantitatively by the material in HCl/NaOH (pH 1.0–9.0) media, while only Se(IV) was adsorbed quantitatively in sodium acetate buffer (pH 3.5–6.0). Thus, the assay of Se(VI) is based on subtracting Se(IV) from total selenium by controlling different adsorptive media without employing any redox procedure. Under the optimum conditions, the detection limit of Se(IV) is 9.0 ng/L with an enrichment factor of 100, and the relative standard deviation is 3.6% (n = 9, C = 5.0 ng/mL). The developed method was successfully applied to the speciation of inorganic selenium in environmental water samples with satisfactory results. In order to further verify the accuracy of the developed method, it was applied to analysis of total selenium in GSBZ 50031–94 certified reference environmental water, and the determined values coincided with the certified values very well.     

Ring-Opening 1,3-Aminochalcogenation of Donor–Acceptor Cyclopropanes: A Three-Component Approach

A 1,3-aminothiolation was realized by reacting 2-substituted cyclopropane 1,1-dicarboxylates with sulfonamides and N-(arylthio)succinimides. Under Sn(OTf)₂ catalysis the transformation proceeded smoothly to the corresponding ring-opened products bearing the sulfonamide in the 1-position next to the donor and the arylthio residue in the 3-position next to the acceptor. The procedure was extended to the corresponding selenium analogues by employing N-(phenylseleno)succinimides as an electrophilic selenium source.     

Flow injection on-line dilution for multi-element determination in human urine with detection by inductively coupled plasma mass spectrometry

A simple flow injection on-line dilution procedure with detection by inductively coupled plasma mass spectrometry (ICP-MS) was developed for the determination of copper, zinc, arsenic, lead, selenium, nickel and molybdenum in human urine. Matrix effects were minimized by employing a dilution factor of 16.5 with on-line standard addition, and (103)Rh was used as internal standard to compensate for signal fluctuation. The procedure was validated by the analysis of two standard reference materials SRM 2670 (NIST) and Seronormtrade mark Trace Elements in Urine. Recovery experiments were performed by spiking the reference materials as well as artificial urine. The detection limits (mug l(-1)) were 0.12,0.96,0.30,0.09,0.45,0.08,0.09, and the precisions (RSD,%) were 2.6,2.3,3.0,3.7,3.7,4.9,2.8 for Cu, Zn, As, Pb, Se, Ni and Mo, respectively. The procedure was applied to the analysis of 41 human urine samples. No correlations between the concentrations of the elements were observed.     

Simultaneous determination of mercury and selenium in biological materials by radiochemical neutron activation analysis

A simple and sensitive radiochemical neutron activation analysis (RNAA) method has been developed for the simultaneous determination of mercury and selenium in biological materials. The radiochemical procedure is based upon the digestion of irradiated samples with sulphuric and nitric acids followed by subsequent extractions of mercury and selenium into toluene, first of mercury from 7.5 M H₂SO₄-0.01M HBr media and after of selenium from 7M H₂SO₄-1 M HBr media. After washing of the organic phases with similar media, the mercury bromide was back-extracted into 0.034M EDTA in 5% aqueous ammonia and the selenium bromide into 0.14M H₂O₂ in aqueous solution. The¹⁹⁷Hg and the⁷⁵Se were counted on a Ge(Li) detector. The precision and accuracy of the method was checked by analysing NBS Standard Reference Materials: orchard leaves and bovine liver.     

Sorption-spectroscopic determination of selenium using a PANV-AV-17 fibrous ion-exchanger

The possibility of determining selenium on the solid phase of polyacrylonitrile fibers impregnated by an AV-17 anion-exchanger ([PANV-AV-17]) were examined by virtue of diffuse reflectance spectroscopy. Reactions of a complex formation between selenium(IV) and organic reagents on solid phase as well as the formation of an elemental selenium sol both on the solid phase and in solution followed by absorption were studied. The best analytical parameters were achieved in the adsorption of selenium sol formed in solution upon the addition of ascorbic acid. The comparison of the batch and dynamic adsorption modes revealed greater advances of the dynamic one. The optimal conditions for determining selenium were proved as follows: the formation of a selenium sol in a 1% ascorbic acid solution at pH 2 and dynamic adsorption at a flow rate of 5 mL/min. A procedure was developed for determining selenium with a limit of detection of 0.1 mg/L. The procedure was validated by the added-found method in the analysis of river and well natural waters and also the standard specimen OSO-200-90, which also contained As, Bi, Sb, and PO₄³⁻. The duration of analysis for 5–6 samples of the volume 100 mL was 30 min approximately, RSD < 20%.     

Determination of selenium in infant foods using electrothermal atomic absorption spectrometry with direct slurry sample introduction

Slurry sampling electrothermal atomic absorption (SS ETAAS) was applied to the development of a sensitive and precise method for selenium determination in infant foods without sample pretreatment. Suspensions prepared in a medium containing 0.1% Triton X-100, 0.5 or 5% v/v concentrated HNO₃ were directly introduced into the furnace. The accuracy of the procedure was confirmed by analysis of a standard reference material and comparison with hydride generation atomic absorption spectrometric (HGAAS) procedure. The characteristic mass is 44 pg and detection limit 0.43 μg·l⁻¹.     

Study of the stability of selenium compounds in human urine and determination by mixed ion-pair reversed-phase chromatography with ICP-MS detection

The stability of five selenium compounds, selenate, Se(VI), selenourea, SeUr, trimethylselenonium ion, TMSe(+), selenomethionine, SeMet, and selenoethionine, SeEt, at concentrations from 30-60 micro g L(-1) in a pooled human urine, stored in dark at -20 degrees C, 4 degrees C, or ambient temperature (ca. 25 degrees C), without addition of any stabilizing reagent was evaluated. The investigated Se species were determined independently by mixed ion-pair reversed-phase liquid chromatography with inductively coupled plasma mass spectrometric (ICP-MS) detection. The general trend is the lower the temperature used for storage, the higher the stability of Se species, when other conditions such as light, acidity, and container material are kept constant. On the basis of these results it is considered that the storage of urine samples at -20 degrees C for a short-term (within one month) is safe for Se speciation analysis. Long-term storage of urine samples for speciation analysis should, however, be undertaken with caution.     

SE-HPLC-ICP-MS联用技术在富硒蛹虫草硒蛋白形态分析中的应用研究

从富硒培养的虫草中提取可溶性蛋白质, 经过(NH4)2SO4分级盐析, 采用ICP-MS对不同盐析组分中蛋白及硒分布进行测定, 结果表明, 富硒蛹虫草的可溶性硒含量占总硒含量的69.3%以上, 在所得的各级蛋白组分中, 除A组分(0~30%饱和度的盐析)外, 其它各组分均存在含硒蛋白, 其硒含量高低顺序为B组分(30%~50%饱和度的盐析)>C组分(50%~75%饱和度的盐析)>D组分(75%~100%饱和度的盐析)>A组分. 采用SE-HPLC-ICP-MS联机技术对样品中的硒蛋白进行分离检测, 结果表明, 其分子量分布在114000和1000之间， 且含量各异. 进一步研究结果表明, 硒在虫草体内参与了蛋白的合成, 这对于以蛹虫草为载体将无机硒有机化具有重要意义.     

Simultaneous determination of arsenic, selenium and mercury in foodstuffs by chemical vapour generation inductively coupled plasma optical emission spectroscopy

A procedure for the simultaneous determination of arsenic, selenium and mercury in foodstuffs has been developed. After a two-step microwave-assisted wet digestion in closed vessels, using concentrated nitric acid and hydrogen peroxide, the solution was analysed by inductively coupled plasma multichannel-based emission spectrometry using chemical vapour generation as the sample introduction system. All steps of the procedure, such as solid sample dissolution, pre-reduction to the suitable oxidation state, vapor generation, transport and atomization have been designed and optimised taking into account the concomitant presence of all the analytes considered. Temporal variation of analytical signals as well as interfering effects due to transition elements were also studied. Under the optimised operating conditions, the achieved detection limits for the simultaneous determination of arsenic, selenium and mercury in foodstuffs were 0.006, 0.023 and 0.018 microg g(-1), respectively, allowing their determination in real samples. Precision of the analytical procedure was 6.8% for arsenic, 5.2% for selenium and 7.7% for mercury (n=7). The accuracy and reliability of the method was verified by the analysis of both standard reference materials (rice flour and spinach leaves) and real samples (natural and Se-enriched rice).     

Quantitative gel electrophoresis: new records in precision by elaborated staining and detection protocols

Gel electrophoresis (GE) is a very common analytical technique for proteome research and protein analysis. Despite being developed decades ago, there is still a considerable need to improve its precision. Using the fluorescence of Colloidal Coomassie Blue -stained proteins in near-infrared (NIR), the major error source caused by the unpredictable background staining is strongly reduced. This result was generalized for various types of detectors. Since GE is a multi-step procedure, standardization of every single step is required. After detailed analysis of all steps, the staining and destaining were identified as the major source of the remaining variation. By employing standardized protocols, pooled percent relative standard deviations of 1.2-3.1% for band intensities were achieved for one-dimensional separations in repetitive experiments. The analysis of variance suggests that the same batch of staining solution should be used for gels of one experimental series to minimize day-to-day variation and to obtain high precision.     

MoSe2/Co-MOF/NF复合材料的制备及电催化产氧性能

设计高效的催化剂对于电解水制氢至关重要。基于过渡金属硒化物(TMSe)的高催化活性和金属有机骨架(MOFs)的灵活结构，我们提出了一种将MOFs与TMSe复合的策略，在导电基底泡沫镍(NF)上生长的复合材料不仅继承了2种单体的优点，还有效地改善了MOFs导电性差、TMSe易团聚的缺点。MoSe₂/Co-MOF/NF在碱性溶液中展示出优异的电催化产氧活性，在电流密度为10 mA·cm^-2时其过电位仅为242 mV，塔菲尔斜率仅为50.64 mV·dec^-1。此外，该材料在碱性溶液中经1 000圈循环伏安(CV)循环测试和30 h的恒电压电解测试均表现出良好的稳定性。     

MoSe2/Co-MOF/NF复合材料的制备及电催化产氧性能

设计高效的催化剂对于电解水制氢至关重要。基于过渡金属硒化物(TMSe)的高催化活性和金属有机骨架(MOFs)的灵活结构,我们提出了一种将MOFs与TMSe复合的策略,在导电基底泡沫镍(NF)上生长的复合材料不仅继承了2种单体的优点,还有效地改善了MOFs导电性差、TMSe易团聚的缺点。MoSe₂/Co-MOF/NF在碱性溶液中展示出优异的电催化产氧活性,在电流密度为10 mA·cm^-2时其过电位仅为242 mV,塔菲尔斜率仅为50.64 mV·dec^-1。此外,该材料在碱性溶液中经1 000圈循环伏安(CV)循环测试和30 h的恒电压电解测试均表现出良好的稳定性。