Kinetic spectrophotometric methods for the determination of dothiepin hydrochloride in bulk and in drug formulation

Two simple and sensitive kinetic methods for the determination of dothiepin hydrochloride are described. The first method is based on kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 25 min. The absorbance of the colored manganate ions is measured at 610 nm. The second method is based on the reaction of dothiepin hydrochloride with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in the presence of 0.1 mol L^–1 sodium bicarbonate. Spectrophotometric measurement was achieved by recording the absorbance at 470 nm for a fixed time of 60 min. All variables affecting the development of the color were investigated and the conditions were optimized. Plots of absorbance against concentration in both procedures were rectilinear over the ranges 4–24 and 50–250 g mL^–1, with mean recoveries 99.33±0.42 and 99.88±0.53, respectively. The proposed methods were successfully applied for the determination of dothiepin hydrochloride in bulk powder and in capsule dosage form. The results obtained were found to agree statistically with those given by the non-aqueous B.P. method. Furthermore the methods were validated according to USP guidelines and also assessed by applying the standard addition technique. The determination of dothiepin hydrochloride by the fixed concentration method is feasible with the calibration equations obtained, but the fixed time method proves to be more applicable.     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

Kinetic spectrophotometric determination of hyoscine butylbromide in pure form and in pharmaceutical formulations

A simple and sensitive kinetic method was described for the determination of hyoscine butylbromide in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 15 min. The absorbance of the colored manganate ion was measured at 610 nm. The absorbance–concentration plot was rectilinear over the range of 1.0–10 μg mL^?1 (r = 0.9999) and detection limit of 0.092 μg mL^?1. The concentration of hyoscine butylbromide was calculated using the corresponding calibration equation for the fixed-time method. The determination of hyoscine butylbromide by the fixed-concentration and rate constant methods is also feasible with the calibration equations obtained but the fixed-time method has been found to be more applicable. The different experimental parameters affecting the development and stability of the colors were carefully studied and optimized. The proposed method was applied to the determination of hyoscine butylbromide in pharmaceutical formulations. The results obtained were in good agreement with those obtained using the official British Pharmacopeial method (2004).     

Kinetic spectrophotometric determination of famotidine in commercial dosage forms.

A simple kinetic spectrophotometric method is described for the determination of famotidine. The method is based on the oxidation of the drug with alkaline potassium permanganate. The reaction is followed spectrometrically by measuring the rate of change of the absorbance at 610 nm. The initial-rate and fixed-time (at 12 min) methods are adopted for determining the drug concentration. The calibration graphs are linear in the ranges of 2-10 microg mL(-1) and 1-8 microg mL(-1) using the initial-rate and fixed-time methods, respectively. The method has been applied to the determination of famotidine in tablet formulations. The obtained results are compared statistically with those given by a reference spectrophotometric method.     

Kinetic spectrophotometric determination of certain cephalosporins using oxidized quercetin reagent

A simple, precise and accurate kinetic spectrophotometric method for determination of cefoperazone sodium, cefazolin sodium and ceftriaxone sodium in bulk and in pharmaceutical formulations has been developed. The method is based upon a kinetic investigation of the reaction of the drug with oxidized quercetin reagent at room temperature for a fixed time of 30 min. The decrease in absorbance after the addition of the drug was measured at 510 nm. The absorbance concentration plot was rectilinear over the range 80–400 μg mL⁻¹ for all studied drugs. The concentration of the studied drugs was calculated using the corresponding calibration equation for the fixed time method. The determination of the studied drugs by initial rate, variable time and rate-constant methods was feasible with the calibration equations obtained but the fixed time method has been found to be more applicable. The analytical performance of the method, in terms of accuracy and precision, was statistically validated; the results were satisfactory. The method has been successfully applied to the determination of the studied drugs in commercial pharmaceutical formulations. Statistical comparison of the results with a well established reported method showed excellent agreement and proved that there is no significant difference in the accuracy and precision.     

Kinetic spectrophotometric determination of the macrolide antibiotic josamycin in formulations

A simple kinetic spectrophotometric method was developed for the determination of josamycin in its dosage forms. The method is based on oxidation of the drug with alkaline potassium permanganate at room temperature for a fixed time of 20 min and measuring the produced green color at 611 nm. The absorbance-concentration plot is rectilinear over the range of 2-10 microg/mL (2.4 x 10(6)-1.2 x 10(-5)M) with minimum detectability of 1.0 microg/mL (1.2 x 10(-6)M). The determination of josamycin by fixed concentration and the rate-constant methods is also feasible with the calibration equations obtained, but the fixed-time method proved to be more applicable. The procedure was applied successfully to commercial tablets, and statistical analysis showed that the results compared favorably with those obtained by reference methods. The effect of sensitizers and surfactants on the performance of the proposed method was also studied. A proposal of the reaction pathway was presented.     

Kinetic determination of cephalexin in drug formulations

A kinetic method for the accurate determination of cephalexin has been described. A solution of cephalexin is reacted with 5 x 10(-3)M cobalt(II) nitrate in 1 x 10(-3)M sodium hydroxide at 60 degrees C for a fixed time of 6 min, after which the absorbance of the reaction product is measured at 310 nm. The concentration of cephalexin is calculated by using the corresponding calibration equation for the fixed-time method. The method has been applied to proprietary drugs and the results were compared statistically with those given by the BP method. The determination of cephalexin by the fixed-concentration and rate-constant methods is feasible with the calibration equations obtained but the fixed-time method has been found to be more applicable.     

Kinetic spectrophotometric determination of atenolol in dosage forms

A simple kinetic procedure is described for the determination of atenolol in its dosage forms. The procedure is based on coupling the drug with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in pH 8 borate buffer at the boiling temperature for a fixed time of 30 min, and then measuring the absorbance of the reaction product at 460 nm. The absorbance-concentration plot is rectilinear over the range 5-50 microg/mL with a minimum detection limit of 1.3 microg (4.9 x 10(-6) M). The determination of atenolol by the fixed-concentration and rate-constant methods is also feasible with the calibration equations obtained, but the fixed-time method proved to be more applicable. The procedure was applied successfully to commercial tablets, and statistical analysis showed that the results compared favorably with those obtained by the official methods. The interference likely to be introduced from some coformulated drugs and the effect of sensitizers and surfactants on the performance of the proposed method were also studied. A proposed reaction pathway is presented.     

Charge-transfer complexes of phenylephrine with nitrobenzene derivatives

The molecular charge-transfer complexes of phenylephrine with picric acid and m-dinitrobenzene have been studied and investigated by IR, 1H NMR electronic spectra in organic solvents and buffer solutions, respectively. Simple and selective methods are proposed for the determination of phenylephrine hydrochloride in bulk form and in tablets. The two methods are based on the formation of charge-transfer complexes between drug base as a n-donor (D) and picric acid, m-dinitrobenzene as pi-acceptor (A). The products exhibit absorption maxima at 497 and 560 nm in acetonitrile for picric acid and m-dinitrobenzene, respectively. The coloured product exhibits an absorption maximum at 650 nm in dioxane. The sensitive kinetic methods for the determination phynylephrine hydrochloride are described. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time at 20 min.     

Use of an oxidation reaction for the quantitative determination of albendazole with Chloramine-T and acid dyes.

One titrimetric and two spectrophotometric procedures have been reported for the determination of albendazole and its tablets. Using titrimetry, the drug was titrated directly with Chloramine-T under acidic conditions using a Methyl Orange indicator. The spectrophotometric procedures involve treating the sample solution with a measured excess of Chloramine-T in an acid medium, followed by an estimation of unreacted Chloramine-T by reacting with a fixed amount of either Methyl Orange or Indigo Carmine dye solution and measuring the absorbance at 510 nm or 610 nm. The stoichiometric ratio, which forms the basis for the calculations in titrimetry as well as the range of the applicability, are reported. The Beer's law range and sensitivity values for spectrophotometric procedures are included. The methods were applied to the determination of albendazole in tablets with satisfactory results.     

Kinetic Spectrophotometric Determination of Famotidine in Pharmaceutical Preparations

A kinetic method for the accurate and sensitive determination of famotidine has been described. The method is based on the alkaline oxidation of famotidine with potassium permanganate at a fixed time of 10 min. The formed manganate ion is measured at 610 nm. The concentration of famotidine is calculated using the calibration equation for the fixed time method. Beer's law was obeyed in the range of 1–10 μg/mL and the R.S.D. (n = 10) was 0.47%. The method has been applied successfully to commercial tablet dosage form.     

Determination of Trace Amounts of Vanadium by Kinetic-Catalytic Spectrophotometric Methods

Kinetic-catalytic spectrophotometric methods were proposed for the determination of trace amounts of vanadium element as vanadium（Ⅳ） and/or V（Ⅴ） ions. The vanadium（Ⅳ） as VO^2＋ ion and/or vanadium（Ⅴ） as VO3^- ion showed a catalytic effect on the kinetic reactions between a color reagent such as methylthymol blue （MTB） or SPADNS and bromate in acidic media. The rate of decrease in the absorbance of the reagent MTB at 440 nm or SPADNS at 510 nm was proportional to concentration of V（Ⅳ） and/or V（Ⅴ） ions in the solution. The linear ranges for determination of vanadium were obtained in the range of 1.0-150 and 5.0-100.0 μg/L by the fixed-time and slope methods, respectively, with using MTB as reagent. In the presence of SPADNS as reagent, the calibration curves were made in the amplitude 1.0-200.0 and 5.0-150 μg/L of vanadium ion by the fixed-time and slope methods, respectively. Using fixed-time method, the limits of detection were obtained to be 0.5 and 0.7 μg/L of vanadium in the presence of MTB and SPADNS as reagents, respectively. Detection limits of vanadium by slope method and reagents of SPADNS and MTB were obtained to be 3.5 and 3.8 μg/L of vanadium, respectively. The proposed methods were applied successfully to determination of vanadium in synthetic and real samples.     

Kinetic spectrophotometric determination of ascorbic acid by reduction of toluidine blue

A simple kinetic method is described for the determination of ascorbic acid. The procedure is based on the reduction of toluidine blue with ascorbic acid. The rate of reaction is followed by measuring the decrease in absorbance of toluidine blue (lambda(max) = 600 nm) as a result of its decolorization upon reduction by ascorbic acid. Ascorbic acid in the range of 3-35 microg/ml was determined using slope and fixed time methods of analysis, while the variable time method allowed the determination of 5-50 microg/ml of ascorbic acid. The percent relative standard deviation of the method varied from 0.78 to 1.32% depending on the kinetic method used. The high sensitivity of the method also allows determination of low levels of ascorbic acid in some fruits and vegetables such as dew melon, water melon, parsley and coriander.     

Sequential spectrophotometric determination of inorganic arsenic species by hydride generation from selective medium reactions and colour bleaching of permanganate

A simple spectrophotometric method is presented for the sequential determination of inorganic arsenic (As) species in one sample. It is based on the sequential arsine generation from As(III) and As(V) using selective medium reactions, collection of the arsine generated in an absorbing solution containing permanganate and ethanol at 5 °C and subsequent reduction of permanganate by arsine. The decrease in permanganate absorbance at 524.2 nm is monitored for As determination. The acetic acid/sodium acetate and HCl mediums were used for selective arsine generation from As(III) and remaining As(V) in one solution, respectively. The effect of interferences and their possible mechanisms were discussed. Interferences from transition metal ions were removed by using a Chelex 100 resin. Under optimized conditions, the established method is applicable to the determination of 3-30 μg of each arsenic species. Good recoveries (96-102%) of spiked artificial sea water, tap water and standard mixtures of As(III) and As(V) were also found. The method is simple, accurate, precise and environmental friendly.     

Validated kinetic spectrophotometric method for the determination of metoprolol tartrate in pharmaceutical formulations

A kinetic spectrophotometric method has been described for the determination of metoprolol tartrate in pharmaceutical formulations. The method is based on reaction of the drug with alkaline potassium permanganate at 25+/-1 degrees C. The reaction is followed spectrophotometrically by measuring the change in absorbance at 610 nm as a function of time. The initial rate and fixed time (at 15.0 min) methods are utilized for constructing the calibration graphs to determine the concentration of the drug. Both the calibration graphs are linear in the concentration range of 1.46 x 10(-6)-8.76 x 10(-6) M (10.0-60.0 microg per 10 ml). The calibration data resulted in the linear regression equations of log (rate)=3.634+0.999 log C and A=6.300 x 10(-4)+6.491 x 10(-2) C for initial-rate and fixed time methods, respectively. The limits of quantitation for initial rate and fixed time methods are 0.04 and 0.10 microg ml(-1), respectively. The activation parameters such as E(a), DeltaH(double dagger), DeltaS(double dagger) and DeltaG(double dagger) are also evaluated for the reaction and found to be 90.73 kJ mol(-1), 88.20 kJ mol(-1), 84.54 J K(-1) mol(-1) and 63.01 kJ mol(-1), respectively. The results are validated statistically and through recovery studies. The method has been successfully applied to the determination of metoprolol tartrate in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Kinetic Spectrophotometric Analysis and Spectrofluorimetric Analysis of Ciprofloxacin Hydrochloride and Norfloxacin in Pharmaceutical Preparations Using 4‐Chloro‐7‐Nitrobenzo‐2‐Oxa‐1,3‐Diazole (NBD‐Cl)

Simple, reliable, sensitive and accurate kinetic spectrophotometric and spectrofluorimetric methods were proposed for the determination of ciprofloxacin hydrochloride (CPX) and norfloxacin (NRX) in pure form and in pharmaceuticals. The methods are based on coupling the studied drugs with 4‐chloro‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐Cl) in the presence of alkaline borate buffer. Spectrophotometric measurement was achieved by recording the absorbance at 477 nm after a fixed time of 20 and 15 min on a water bath adjusted at 70 ± 1 °C for CPX and NRX, respectively. The same product exhibited emission peaks at 540 nm. The different experimental parameters affecting the development and stability of the color were carefully studied and optimized. The absorbance concentration plots were linear over the ranges 3‐18 and 2.5‐15.0 μg/mL for CPX and NRX, respectively, while the fluorescence concentration plots were linear over the ranges 0.06‐0.36 and 0.05‐0.30 μg/mL for CPX and NRX, respectively. The limit of detection of the kinetic method was about 0.2 μg/mL for both drugs while the fluorescence measurement enabled their detection at a concentration of about 0.012 μg/mL. The proposed methods were successfully applied for the assay of the two drugs in their commercial products. The results obtained were statistically compared with those obtained by reference HPLC and spectrophotometric methods. The stoichiometry of the reaction was determined and the reaction pathway was postulated.     

双波长双指示剂-催化动力学光度法测定奶粉中的锌

研究发现在HCl介质中,痕量锌对H2O2氧化甲基紫和亚甲基蓝褪色具有强烈的催化作用,通过测量580 nm和668 nm处催化反应体系和非催化反应体系吸光度的变化,建立了双波长双指示剂催化动力学光度法测定痕量锌的新方法。在最佳实验条件下,线性范围为1.5~60μg/L,线性方程为ΔA=0.0169ρZn2+(μg/mL)+0.0019,r=0.9982,方法检出限为0.84μg/L。该方法可用于奶粉痕量锌的测定。     

Kinetic spectrophotometric method for the determination of ranitidine and nizatidine in pharmaceuticals

An accurate and simple kinetic method is described for the determination of ranitidine and nizatidine in pure form and in pharmaceuticals. The method is based on the reaction of the compounds with 7-chloro-4-nitrobenz-2-oxa-1,3-diazole in pH 7.4 borate buffer at 60 degrees C for a fixed time of 25 min for both compounds. The absorbance of the reaction product is measured at 495 nm for ranitidine and nizatidine. Calibration graphs were linear over the concentration range of 2-20 microg/mL, with limits of detection of 0.13 (3.7 x 10(-7) M) and 0.25 microg/mL (7.5 x 10(-7) M) for ranitidine and nizatidine, respectively. The proposed method was applied successfully to the determination of ranitidine in tablets and ampoules with average recoveries of 100.26+/-0.69 and 100.29+/-0.59%, respectively, and to the determination of nizatidine in capsules with an average recovery of 104.26+/-0.44%. The results obtained are in good agreement with those obtained by the other methods used for comparison. A proposal of the reaction pathway is also presented.     

Potential application of the reaction between hydroquinone and chromate with respect to the kinetic determination of iron

The analytical potential of the reaction between hydroquinone and chromate in acidic media is explored with respect to the kinetic determination of iron in water samples. The extent of the reaction is followed spectrophotometrically at 350 nm. The reaction occurs more quickly in the presence of the metal ion, but the values of absorbance at reaction initiation and completion are not altered. No other transitional metal ion affects the course of the reaction, regardless of its concentration. This fact represents the most eye-catching and analytically exploitable aspect of this indicator reaction. Three procedures used to obtain calibration graphs from the same kinetic data are discussed: slope, fixed and variable time techniques. The reaction follows a sequence of two consecutive steps, both of first-order with respect to the colored species. First-order kinetics is preserved in the presence of iron. Curve fitting is used to determine the corresponding rate coefficients. The slope method requires much data and uses plots of rate constants against analyte concentration for calibration purposes. In this case, the best detection limit (0.5 mg l^–1) is given by the faster stage. On the other hand, the rate-determining step enables more precise results. The fixed and variable time methods rely on similar principles: they register either the value of absorbance achieved at a predetermined reaction time (here, 50 s) or the time interval required for the absorbance to drop to a predetermined value (here, 0.15 absorbance at 350 nm). In both cases, ratios between the average value from the blind runs and all individual values are plotted against the analyte concentration. The best results (detection limit of 0.3 mg l^–1) are derived from the variable time procedure. Advantageously, neither of the techniques require the entire kinetic curve, and so sophisticated equipment is not needed.     

Rapid Spectrophotometric Determination Of Osmium With Cyclohezane 1,3-Dione Bisthiosemicarbazone Monohydrochloride: Simultaneous Determination of Osmium and Platinum

Abstract

A simple, sensitive and rapid spectrophotometric method has been developed for the determination of osmium using cyclohexane 1,3-dione bisthiosemicarbazone mono-hydrochloride (1,3-CHDT.HCl). The method is based on the instantaneous colour reaction between 1,3-CHDT. HCl and osmium(VIII) in sodium acetate—acetic acid buffer medium (pH range 3–6). The osmium complex shows maximum absorbance at 375 nm and considerable absorbance at 510 nm. Although the complex formed between platinum(IV) and reagent (1,3-CHDT.HCl) shows maximum absorbance at 375 nm, it does not show any absorbance at 510 nm. Simultaneous determination of osmium and platinum is carried out when present alone and in presence of other foreign (associated) ions. Some physico-chemical and analytical characteristics of osmium and platinum complex are described. Interference of various foreign ions have studied and osmium is estimated selectively in the presence of constituents of platinum ores.