Effect of Carbonaceous Carrier and Promoter on Electrocatalytical Properties of Composite Cathodes in Fuel Cells with Alkaline Electrolyte

The activity of composite catalysts, Pt and Co-porphyrin- or Fe-phthalocyanine-based pyropolymers on low-disperse carbonaceous carriers (graphite, carbon black), in the oxygen and H₂O₂electroreduction in 1 M KOH is studied. Kinetic parameters of oxygen electroreduction are determined from experiments with rotating disk and model floating electrodes. Possible mechanism of the oxygen electroreduction reaction is discussed; it includes a slow stage of attachment of the second electron on the pyropolymer/carbonaceous carrier or joining the first electron (under the conditions of Temkin adsorption) on the platinum/graphite catalysts.     

States of cobalt and iron in catalysts supported on TiO2 from data of diffuse reflectance IR spectra of adsorbed carbon monoxide

The variations in the oxidation states of cobalt and iron atoms in pure and mixed Co- and Fe-containing catalysts supported on TiO₂ as a function of the conditions in which the catalysts were prepared and preliminarily treated were studied by analysis of the IR spectra of carbon monoxide adsorbed on these catalysts. A mutual influence of the components was discovered; iron was found to promote reduction of cobalt.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1946–1951, October, 1995.     

Liquid Phase Hydrogenolysis of Biomass‐derived Lactate to 1,2‐Propanediol over Silica Supported Cobalt Nanocatalyst

Liquid phase hydrogenolysis of ethyl lactate to 1,2‐propanediol was performed over silica supporting cobalt catalysts prepared by two different methods: precipitation‐gel (PG) technique and deposition‐precipitation (DP) procedure. The cobalt species (Co₃O₄/cobalt phyllosilicate) present in the corresponding calcined PG and DP catalysts were different as a consequence of the preparation methods, and Co OH Co olation and Si O Co oxolation molecular mechanisms were employed to elucidate the chemical phenomena during the different preparation procedures. In addition, the texture (BET), reduction behavior (TPR and in‐situ XRD), surface dispersion and state of cobalt species (XPS), and catalytic performance differ greatly between the samples. Because of small particle size, high dispersion of cobalt species and facile reducibility, the Co/SiO₂ catalyst prepared by precipitation‐gel method presented a much higher activity than the catalyst prepared by deposition‐precipitation method. Metallic cobalt is assumed to be the catalytically active site for the hydrogenolysis reaction according to the catalytic results of both cobalt samples reduced at different temperatures and the structure changes after reaction.     

Synthesis, Crystal Structure of Co(Ⅱ)(6-methoxybenzothiazole-2-carboxylate)_2(DMF)_2 and Its Application to Carbonylation of Benzyl Chloride

A new complex, Co(MBTC)₂(DMF)₂ (MBTC=6‐methoxybenzothiazole‐2‐carboxylate, DMF=N,N‐dime‐ thylformamide), was synthesized in DMF solution and characterized by single crystal X‐ray diffraction analysis. Using the cobalt complex as catalyst, phenylacetic acid was prepared by the carbonylation of benzyl chloride with carbon monoxide (0.1 MPa). The effects of solvents, phase transfer catalysts and temperature on the reactions were investigated. The yield of phenylacetic acid was higher than 90% in optimized condition.     

Catalytic Hydrogenation of Acetic Acid to Acetaldehyde: Synergistic Effect of Bifunctional Co/Ce‐Fe Oxide Solid Solution Catalysts

The large‐scale industrial production of acetic acid (HAc) from carbonylation of methanol has enabled intense research interest from direct hydrogenation of HAc to acetaldehyde (AA). Herein, a series of cerium‐iron oxide solid solution supported metallic cobalt catalysts were prepared by modified sol‐gel method and were applied in gas‐phase hydrogenation of HAc to AA. A synergistic effect between the hydrogenation metal cobalt and Ce‐Fe oxide solid solution is revealed. Specifically, oxygen vacancies provide the active sites for adsorption of HAc, while highly uniformly dispersed metallic Co adsorbs H₂ and activates the reduction of HAc into AA. Moreover, the metallic Co can also assist the cyclical conversion between Fe³⁺/Fe²⁺ and Ce³⁺/Ce⁴⁺ on the surface of Ce_1‐xFe_xO_2‐δ supports. The unique effect substantially enhances the ability of the support material to rapidly capture oxygen atoms from HAc. It is found that the catalyst of 5% Co/Ce_0.8Fe_0.2O_2‐δ with the highest concentration of oxygen vacancy presents the best catalytic performance (i.e. acetaldehyde yield reaches 49.9%) under the optimal reaction conditions (i.e. 623 K and H₂ flow rate = 10 mL/min). This work indicates that the Co/Ce‐Fe oxide solid solution catalyst can be potentially used for the selective hydrogenation from HAc to AA. The synergy between the metallic Co and Ce_1‐xFe_xO_2‐δ revealed can be extended to the design of other composite catalysts.     

Densely Packed,Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlling the selectivity in electrochemical CO₂ reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO₂ electroreduction, most Sn‐based catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO₂ reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultra‐small size of the nanoparticles (2.6 nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix.     

Densely Packed,Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlling the selectivity in electrochemical CO₂ reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO₂ electroreduction, most Sn‐based catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO₂ reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultra‐small size of the nanoparticles (2.6 nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix.     

High‐Efficiency Oxygen Reduction to Hydrogen Peroxide Catalyzed by Nickel Single‐Atom Catalysts with Tetradentate N2O2 Coordination in a Three‐Phase Flow Cell

Carbon‐supported Ni^II single‐atom catalysts with a tetradentate Ni‐N₂O₂ coordination formed by a Schiff base ligand‐mediated pyrolysis strategy are presented. A Ni^II complex of the Schiff base ligand (R,R)‐(?)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine was adsorbed onto a carbon black support, followed by pyrolysis of the modified carbon material at 300 °C in Ar. The Ni‐N₂O₂/C catalyst showed excellent performance for the electrocatalytic reduction of O₂ to H₂O₂ through a two‐electron transfer process in alkaline conditions, with a H₂O₂ selectivity of 96 %. At a current density of 70 mA cm^?2, a H₂O₂ production rate of 5.9 mol g_cat.^?1 h^?1 was achieved using a three‐phase flow cell, with good catalyst stability maintained over 8 h of testing. The Ni‐N₂O₂/C catalyst could electrocatalytically reduce O₂ in air to H₂O₂ at a high current density, still affording a high H₂O₂ selectivity (>90 %). A precise Ni‐N₂O₂ coordination was key to the performance.     

Impact of the Pt catalyst on the oxygen electroreduction reaction kinetics on various carbon supports

Micro- and mesoporous carbide-derived carbons synthesized from molybdenum and tungsten carbides were used as porous supports for a platinum catalyst. Synthesized materials were compared with commercial Vulcan XC72R conducting furnace black. The scanning electron microscopy, X-ray diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and low-temperature N₂ adsorption methods were applied to characterize the structure of catalysts prepared. The kinetics of oxygen electroreduction in 0.5 M H₂SO₄ solution was studied using cyclic voltammetry and rotating disk electrode methods. The synthesized carbide-derived carbons exhibited high specific surface area and narrow pore size distribution. The platinum catalyst was deposited onto the surface of a carbon support in the form of nanoparticles or agglomerates of nanoparticles. Comparison of carbide-derived carbons and Vulcan XC72R as a support showed that the catalysts prepared using carbide-derived carbons are more active towards oxygen electroreduction. It was shown that the structure of the carbon support has a great influence on the activity of the catalyst towards oxygen electroreduction.     

Co‐Adsorption of O2 and CO on Au2−: Infrared Photodissociation Spectroscopy and Theoretical Study of [Au2O2(CO)n]− (n=2–6)

The co‐adsorption of O₂ and CO on anionic sites of gold species is considered as a crucial step in the catalytic CO oxidation on gold catalysts. In this regard, the [Au₂O₂(CO)_n]^? (n=2–6) complexes were prepared by using a laser vaporization supersonic ion source and were studied by using infrared photodissociation spectroscopy in the gas phase. All the [Au₂O₂(CO)_n]^? (n=2–6) complexes were characterized to have a core structure involving one CO and one O₂ molecule co‐adsorbed on Au₂^? with the other CO molecules physically tagged around. The CO stretching frequency of the [Au₂O₂(CO)]^? core ion is observed around =2032–2042 cm^?1, which is about 200 cm^?1 higher than that in [Au₂(CO)₂]^?. This frequency difference and the analyses based on density functional calculations provide direct evidence for the synergy effect of the chemically adsorbed O₂ and CO. The low lying structures with carbonate group were not observed experimentally because of high formation barriers. The structures and the stability (i.e., the inertness in a sense) of the co‐adsorbed O₂ and CO on Au₂^? may have relevance to the elementary reaction steps on real gold catalysts.     

MnxOy/NC and CoxOy/NC Nanoparticles Embedded in a Nitrogen‐Doped Carbon Matrix for High‐Performance Bifunctional Oxygen Electrodes

Reversible interconversion of water into H₂ and O₂, and the recombination of H₂ and O₂ to H₂O thereby harnessing the energy of the reaction provides a completely green cycle for sustainable energy conversion and storage. The realization of this goal is however hampered by the lack of efficient catalysts for water splitting and oxygen reduction. We report exceptionally active bifunctional catalysts for oxygen electrodes comprising Mn₃O₄ and Co₃O₄ nanoparticles embedded in nitrogen‐doped carbon, obtained by selective pyrolysis and subsequent mild calcination of manganese and cobalt N₄ macrocyclic complexes. Intimate interaction was observed between the metals and nitrogen suggesting residual M–N_x coordination in the catalysts. The catalysts afford remarkably lower reversible overpotentials in KOH (0.1 M ) than those for RuO₂, IrO₂, Pt, NiO, Mn₃O₄, and Co₃O₄, thus placing them among the best non‐precious‐metal catalysts for reversible oxygen electrodes reported to date.     

Effect of ultra-fine gold particle addition to metal oxides in ethylene oxidation

Oxidation of ethylene was carried out over alumina-supported metal oxide catalysts and highly dispersed gold catalysts, respectively, under atmospheric pressure. The ethylene was completely oxidized to produce carbon dioxide and water with both metal oxide and gold catalysts. The activity of gold catalyst prepared by deposition method was much higher than that of supported metal oxide catalysts. Ultra-fine gold particles on Co₃O₄ were more active than on Al₂O₃. Fe₂O₃/Al₂O₃ and MnO₂/Al₂O₃ catalysts were more active than MoO₃/Al₂O₃ catalyst. The activity of the supported metal oxide catalysts was greatly enhanced by addition of gold particles. It was therefore considered that gold particles promote dissociative adsorption of oxygen and the adsorbed oxygen reacts with adsorbed ethylene on support adjacent to the active site.     

Diesel Soot Combustion over Mn2O3 Catalysts with Different Morphologies: Elucidating the Role of Active Oxygen Species in Soot Combustion

Catalytic diesel soot combustion was examined using a series of Mn₂O₃ catalysts with different morphologies, including plate, prism, hollow spheres and powders. The plate‐shaped Mn₂O₃ (Mn₂O₃‐plate) exhibited superior carbon soot combustion activity compared to the prism‐shaped, hollow‐structured and powdery Mn₂O₃ under both tight and loose contact modes at soot combustion temperatures (T₅₀) of 327 °C and 457 °C, respectively. Comprehensive characterization studies using scanning electron microscopy, scanning transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, temperature‐programmed reduction and oxygen release measurements, revealed that the improved activity of Mn₂O₃‐plate was mainly attributed to the high oxygen release rate of surface‐adsorbed active oxygen species, which originated from oxygen vacancy sites introduced during the catalyst preparation, rather than specific surface‐exposed planes. The study provides new insights for the design and synthesis of efficient oxidation catalysts for carbon soot combustion as well as for other oxidation reactions of harmful hydrocarbon compounds.     

Cobalt‐Doped Perovskite‐Type Oxide LaMnO3 as Bifunctional Oxygen Catalysts for Hybrid Lithium–Oxygen Batteries

Perovskite‐type oxides based on rare‐earth metals containing lanthanum manganate are promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline electrolyte. Perovskite‐type LaMnO₃ shows excellent ORR performance, but poor OER activity. To improve the OER performance of LaMnO₃, the element cobalt is doped into perovskite‐type LaMnO₃ through a sol–gel method followed by a calcination process. To assess electrocatalytic activities for the ORR and OER, a series of LaMn_1?xCo_xO₃ (x=0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) perovskite oxides were synthesized. The results indicate that the amount of doped cobalt has a significant effect on the catalytic performance of LaMn_1?xCo_xO₃. If x=0.3, LaMn_0.7Co_0.3O₃ not only shows a tolerable electrocatalytic activity for the ORR, but also exhibits a great improvement (>200 mV) on the catalytic activity for the OER; this indicates that the doping of cobalt is an effective approach to improve the OER performance of LaMnO₃. Furthermore, the results demonstrate that LaMn_0.7Co_0.3O₃ is a promising cost‐effective bifunctional catalyst with high performance in the ORR and OER for application in hybrid Li?O₂ batteries.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Activity of cobalt sulfide catalysts in the hydrogenolysis of dimethyl disulfide to methanethiol: Effects of the nature of a support and the procedure of supporting a cobalt precursor

The conversion of dimethyl disulfide to methanethiol on various catalysts containing supported cobalt sulfide in an atmosphere of hydrogen was studied at atmospheric pressure and T = 190°C. On CoS introduced into the channels of zeolite HSZM-5, the process occurred at a high rate but with a low selectivity for methanethiol because the proton centers of the support participated in a side reaction with the formation of dimethyl sulfide and hydrogen sulfide. Under the action of sulfide catalysts supported onto a carbon support, aluminum oxide, silicon dioxide, and an amorphous aluminosilicate, the decomposition of dimethyl disulfide to methanethiol occurred with 95–100% selectivity. The CoS/Al₂O₃ catalysts were found to be most efficient. The specific activity of alumina-cobalt sulfide catalysts only slightly depended on the phase composition and specific surface area of Al₂O₃. The conditions of the thermal treatment and sulfurization of catalysts and, particularly, the procedure of supporting a cobalt precursor onto the support were of key importance. Catalysts prepared through the stage of supporting nanodispersed cobalt hydroxide were much more active than the catalysts based on supported cobalt salts.     

碳球为模板水热合成Mg-Co复合氧化物及其催化分解N2O

用自制的碳球为模板剂,尿素为沉淀剂,120℃水热合成尖晶石型Mg-Co复合氧化物（MgCo₂O₄）,在其表面浸渍K₂CO₃溶液制得K改性催化剂,用于催化分解N₂O。用X射线衍射（XRD）、N₂物理吸附-脱附、扫描电镜（SEM）、H₂程序升温还原（H₂-TPR）、O₂程序升温脱附（O₂-TPD）、X射线光电子能谱（XPS）等技术对催化剂进行结构表征,考察了钴镁离子/碳球的质量比、尿素/钴镁离子的物质的量比等制备参数对催化剂活性的影响。结果表明,钴镁离子/碳球的质量比为0.192、尿素/钴镁离子的物质的量比为2,制得的MgCo₂O₄催化剂活性较高。K改性MgCo₂O₄催化剂在400℃有氧无水、有氧有水条件下连续反应50 h,N₂O转化率分别保持在91%和62%,稳定性较好。     

Synthesis,Structure, and Magnetic Properties of a Dinuclear Antiferromagnetically Coupled Cobalt Complex

A new dinuclear cobalt(II) compound,[(TPA*)Co^II(DHBQ^2–)Co^II(TPA*)]²⁺ ( 1 ²⁺) {TPA* =tris[(3, 5‐dimethyl‐pyrazol‐l‐yl)methyl] amine, DHBQ = deprotonated 2, 5‐dihydroxy‐1, 4‐benzoquinone}, was prepared and structurally and magnetically characterized. X‐ray crystallography revealed the centrosymmetric dinuclear divalent cobalt ions bridged by DHBQ^2– unit. The cobalt ions in the title compound have a distorted octahedral arrangement by coordination with four nitrogens of a TPA* and two oxygens of a bridging DHBQ unit. Due to the interdimer offset face‐to‐face π–π stacking in the crystallographic ac plane, the complex shows extended 2D supramolecular structure. Magnetic experiments showed the cobalt‐based dinuclear compound exhibits antiferromagnetic interactions with g = 2.35 and J/k_B = –2.76 K, respectively.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Ultrahigh‐Content Nitrogen‐doped Carbon Encapsulating Cobalt NPs as Catalyst for Oxidative Esterification of Furfural

It is an attractive and challenging topic to endow non‐noble metal catalysts with high efficiency via a nitrogen‐doping approach. In this study, a nitrogen‐doped carbon catalyst with high nitrogen content encapsulating cobalt NPs (CoO_x@N‐C(g)) was synthesized, and characterized in detail by XRD, HRTEM, N₂‐physisorption, ICP, CO₂‐TPD, and XPS techniques. g‐C₃N₄ nanosheets act as nitrogen source and self‐sacrificing templates, giving rise to an ultrahigh nitrogen content of 14.0 %, much higher than those using bulk g‐C₃N₄ (4.4 %) via the same synthesis procedures. As a result, CoO_x@N‐C(g) exhibited the highest performance in the oxidative esterification of biomass‐derived platform furfural to methylfuroate under base‐free conditions, achieving 95.0 % conversion and 97.1 % selectivity toward methylfuroate under 0.5 MPa O₂ at 100 °C for 6 h, far exceeding those of other cobalt‐based catalysts. The high efficiency of CoO_x@N‐C(g) was closely related to its high ratio of pyridinic nitrogen species that may act as Lewis basic sites as well as its capacity for the activation of dioxygen to superoxide radical O₂^.?.