Electroconductivity of Sandwich Structures with Polymer Films Doped by Organic Dyes with Coordinated Boron or Metal Atoms

Electroconductivity of sandwich structures with films based on photoconductive poly-N-epoxypropylcarbazole and nonphotoconductive polyvinylethylal doped by organic dyes with coordinated boron and metal atoms is studied. Generally, the electroconductivity is due to (1) a drift of ions, (2) a thermal and field generation of holes from uncontrolled extrinsic centers and electrons and holes from dopant molecules, and (3) a thermal and field injection of electrons and holes from electric contacts. The electroconductivity of structures with thin polymer films that have a high dye concentration is defined by the transport of charge carriers in the dye aggregates.     

Role of chain transfer in heterogeneous polymerization of ethylene

The role of chain transfer was studied for the radiation-induced polymerization of ethylene in precipitating media, namely n-butyl alcohol, tert-butyl alcohol and their mixtures. The affinities of those solvents for polyethylene are similar, but the chain-transfer coefficient of n-butyl alcohol is larger than that of tert-butyl alcohol. The polymerizations were carried out in a reactor of 100 ml under a pressure of 300 kg/cm², at 60°C, dose rate of 3.07 × 10⁴–1.75 × 10⁵ rad/hr in the presence of 50 ml of solvents. The polymerization in tert-butyl alcohol shows the kinetic behavior characteristic of a heterogeneous polymerization, such as rate acceleration, high dose rate dependence of polymerization rate, and low dose rate dependence of polymer molecular weight, whereas the polymerization in n-butyl alcohol does not exhibit such behavior and gives polymer having a molecular weight much lower than that of polymer obtained in tert-butyl alcohol. The polymer formed in tert-butyl alcohol exhibits a bimodal molecular weight distribution measured by gel permeation chromatography. In mixed tert-butyl alcohol and n-butyl alcohol solvent, with increasing fraction of n-butyl alcohol, the two peaks not only shift to lower molecular weight but the higher molecular weight peak becomes relatively small. Eventually, the polymer formed in n-butyl alcohol exhibits a unimodal distribution. Those results are well explained on the basis of the proposed scheme for heterogeneous polymerization.     

Pervaporation Membranes for Separating Mixtures of Methanol and Methyl tert-Butyl Ether

Transport characteristics of new types of bi- and multilayer composite polymer pervaporation membranes and asymmetrical membranes in separating mixtures of methanol and methyl tert-butyl ether were studied. The principles of design of the membranes and their mass-exchange characteristics are treated in terms of the Henis-Tripodi resistance model.     

Structure of the oxidative dimerization product of 4,6-di(<Emphasis Type="Italic">tert</Emphasis>-butyl)pyrogallol

The structure of the oxidation product of 4,6-di(tert-butyl)pyrogallol, viz., 6,10a-dihydroxy-3,4a, 7,9-tetra(tert-butyl)-1,2,4a,10a-tetrahydrodibenzo[b,e][1,4]dioxine-1,2-dione, was established by X-ray diffraction. Dimerization of intermediate 3-hydroxy-4,6-di(tert-butyl)-1,2-benzoquinone occurs by the mechanism of Diels—Alder heterocyclization. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 267–271, February, 2007.     

Reactions of 3,5-di(tert-butyl)-1,2-benzoquinone with terminal acetylenes in the presence of phosphorus trichloride. ipso-Substitution of the tert-butyl group

The reactions of 3,5-di(tert-butyl)-1,2-benzoquinone with aryl-and alkylacetylenes in the presence of phosphorus trichloride afford 4-aryl(alkyl)-8-tert-butyl-2,6-dichloro-2-oxo-2H-benzo[e][1,2]oxaphosphinines as the major ipso-substitution products of the tert-butyl group by the chlorine atom. 4-Aryl(alkyl)-6,8-di(tert-butyl)-2,5-dichloro-2-oxo-and 4-aryl(alkyl)-6-tert-butyl-2,8-dichloro-2-oxo-2H-benzo[e][1,2]oxaphosphinines were obtained as the minor products. The structures of the stable representatives of this series were confirmed by X-ray diffraction. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1836–1845, September, 2007.     

New homochiralortho-palladated matrix bearing a bulky substituent at the carbon stereocenter

A new homochiral dimericortho-palladated complex bearing a bulkytert-butyl substituent at the carbon stereocenter was synthesized from optically activeN,N-dimethyl-α-tert-butylbenzylamine. Regioselective activation of only the aromatic C−H bond was shown to occur during the cyclometallation process proceeding under very mild conditions due to steric effects. Spectral characteristics of mononuclear derivatives of the new dimeric complex indicate that the five-membered palladacycle exists predominantly in one of two possible chiral conformations with the axial position of thetert-butyl substituent. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1375–1384, July, 1997.     

Optical and surface morphological properties of polarizing films fabricated from a chromonic dye by the photoalignment technique

The inherent chromonic lyotropic liquid crystalline properties of a dye have been manipulated to fabricate multi-axial micropolarizing thin films by means of the photoalignment technique. The dye aqueous solution is deposited on a photopatterned polymer film to result in the macroscopic alignment of the dye molecules, followed by drying at ambient temperature. The solid polarizing dye layers thus produced exhibit very a high contrast ratio and degree of polarization in the region of visible light. Addition of a small amount of surfactant to the dye solution is a prerequisite for the generation of a nematic chromonic phase and for the formation of homogeneous thin dye layers on the polymer film. The correlation between the optical and surface morphological properties of the dye layers is discussed.     

Nanolayers of selected porphyrin and phthalocyanine dyes on solid substrates studied by electronic absorption and IR reflection–absorption spectroscopy

Electronic absorption and IR reflection–absorption spectra in non-polarized and in polarized light for lead porphyrin as well as magnesium and lead phthalocyanine dyes when deposited in the form of Langmuir–Blodgett (LB) nanolayers on solid inorganic surfaces (quartz, semiconductor and metal) were measured. Some IR bands of the Langmuir–Blodgett dye layers’ spectra show frequency shifts and changes in the relative intensities as well as in half widths when compared with the vibrational features of powdered dyes dispersed in KBr pellets, which were used as references. The FT-IR spectroscopic examination of the Langmuir–Blodgett layers allowed to estimate electron redistribution at the interface between dye layer and solid substrates. The Langmuir–Blodgett films of different thicknesses (3, 5, 10 layers) were studied at various angles of IR beam incidence and different light polarizations. The most spectacular results were obtained for the grazing incidence (80°) and films of 5 layers for dyes on the Au substrate. The IR spectroscopy was supported with electronic absorption studies (UV–vis) to follow interaction at interface between the dye layers and the substrates as well as to evaluate linear dichroism and to determine arrangement of molecules in the Langmuir–Blodgett films. Molecular arrangement in the Langmuir–Blodgett layers was discussed. It was shown that the dye molecular planes are rather randomly oriented in the Langmuir–Blodgett films with a tendency that the Q_y and Q_x transition moments in the phthalocyanine macroring are slightly directed along the y-axis (Langmuir–Blodgett dipping direction) and the x-axis direction, respectively.     

Deep UV photoresists based on poly(dl-tert-butyl fumarate)

Poly(di-tert-butyl fumarate) was prepared and evaluated as a potential candidate as a deep UV photoresist. Although this polymer displayed excellent sensitivity, the polymer was found to exhibit poor dry etch resistance. Copolymers of di-tert-butyl fumarate with either allyltrimethylsilane or styrene, and an onium salt as a photoacid generator were synthesized and subsequently evaluated using a 248-nm KrF excimer laser step-and-repeat system (stepper). At 248 nm, the absorbance of ～ 1 μm thick resist films was only 0.156-0.211. The sensitivities of these resists were 1-4 mJ/cm². The dry etch resistance of these photoresists was comparable to that of conventional positive photoresists based on novolac resins. © 1995 John Wiley & Sons, Inc.     

Microdomain morphology of lamella‐forming diblock copolymer confined in a thin film

We report the self‐consistent field theory (SCFT) of the morphology of lamella‐forming diblock copolymer thin films confined in two horizontal symmetrical/asymmetrical surfaces. The morphological dependences of thin films on the polymer‐surface interactions and confinement, such as film thickness and confinement spatial structure, have been systematically investigated. Mechanisms of the morphological transitions can be understood mainly through the polymer‐surface interactions and confinement entropy, in which the plat confinement surface provides a surface‐induced effect. The confinement is expressed in the form of the ratio D/L₀, here D is film thickness, and L₀ is the period of bulk lamellar‐structure. Much richer morphologies and multiple surface‐induced morphological transitions for the lamella‐forming diblock copolymer thin films are observed, which have not been reported before. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1–10, 2009     

Thermal elimination of isobutene from meta and para tert-di-butyl pyromellitic acid

An investigation of the kinetics of the thermal elimination of isobutene from the meta and para isomers of the tert-butyl diesters of pyromellitic acid has been carried out using Fourier transform-Raman spectroscopy and mass spectroscopy. These studies indicate that the elimination of the tert-butyl group occurs at a temperature 26°C lower for the meta isomer than for the para isomer; the maximum rate of elimination occurs at 184°C for the former and at 210°C for the latter. Analysis of the Raman spectra of the compounds indicates that this effect results from the better packing arrangement in the para monomer compared with the meta monomer. Formation of pyromellitic dianhydride in the tert-butyl diesters of pyromellitic acid occurred only after formation of the pyromellitic acid; thus it occurred at lower temperatures for the meta isomer. When the meta and para tert-butyl diesters of pyromellitic acid are dissolved at 1% concentration in poly (vinyl acetate), the elimination of isobutene occurs at 173°C for both isomers, indicating that it is the differences in crystal packing which give rise to the 26°C difference in the solid-state samples. For the meta, para, and 50/50 mixed isomers of the tert-butyl esters of oxydianiline/pyromellitic dianhydride polyamic acid, the elimination of the tert-butyl group occurs at the same temperature (177°C). This result indicates that the packing arrangement of the tert-butyl group is disrupted in the polymer chain, so that intermolecular bonding does not hinder thermal deprotection of the tert-butyl group from the polymer. © 1992 John Wiley & Sons, Inc.     

Binuclear and polynuclear transition metal complexes with macrocyclic ligands. 2. New macrocyclic Schiff"s base in the reaction of 4-tert-butyl-2,6-diformylphenol with 1,2-diaminobenzene. Synthesis and structural,spectroscopic, and theoretical study

Condensation of 4-tert-butyl-2,6-diformylphenol with 1,2-diaminobenzene in ethanol is accompanied by partial reduction of the azomethine double bonds to form symmetrical macrocyclic Schiff"s base containing the alternating >C=N and >CH—NH fragments. In solution, this compound exists as the only isomer in which two endocyclic hydrogen atoms are bound to the oxygen atoms of the phenol groups and two other endocyclic H atoms are attached to the nitrogen atoms of the CH₂—NH fragments. All endocyclic protons are involved in hydrogen bonding and undergo rapid exchange with each other at room temperature. In the crystal, the planar macrocyclic molecules are arranged in closely packed stacks. The steric hindrances resulting from overlapping of the bulky tert-butyl groups are eliminated through rotation of the molecules with respect to each other in the adjacent layers. Study of the potential energy surface for the Schiff"s base under consideration by the DFT method demonstrated that the structure corresponding to the global minimum is similar to that found in solution. However, the isolated molecule is nonplanar, its macrocycle adopting a ladder conformation. The local minimum on the potential energy surface whose energy is 2.6 kcal mol^–1 higher than that of the global minimum corresponds to the zwitterionic structure in which all four endocyclic hydrogen atoms are attached to the nitrogen atoms and the macrocycle adopts a tub conformation. Flattening of the ring is considered as a consequence of stacking interactions between the molecules in the crystal.     

Synthesis of substituted 2-amino-4,6-bis(nonafluoro-tert-butyl)-1,3,5-triazines

A procedure was developed for the synthesis of substituted 2-amino-4,6-bis(nonafluoro-tert-butyl)-1,3,5-triazines from 2-chloro-4,6-bis(nonafluoro-tert-butyl)-1,3,5-triazine and aliphatic and aromatic amines. The data of¹⁹F NMR spectroscopy are indicative of the presence of a barrier to internal rotation. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1568–1572, August, 1999.     

p-(Chloro-tert-butyl)cumene hydroperoxide

Oxidation of a mixture ofm- andp-(chloro-tert-butyl) cumenes (12:88) by molecular oxygen gives onlyp-(chloro-tert-butyl)cumene hydroperoxide in a high yield; this product can be used for the synthesis of the pyrethroid ethofenprox. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1248–1250, June, 1998.     

IR and NMR spectra, intramolecular hydrogen bonding and conformations of mercaptothiacalix[4]arene molecules and their para-tert-butyl-derivative

It is demonstrated that the introduction of p-tert-butyl groups dramatically influences the conformational behaviour of the mercaptothiacalix[4]arene molecules. Quantum-chemical computations in combination with IR and NMR spectroscopy prove that, in contrast to closely related calixarenes, the 1,3-alternate becomes a dominant conformer of p-tert-butyl-mercaptothiacalix[4]arene not only in crystal, but also in solutions and in vacuum. It is shown that the title molecules form essentially non-cooperative intramolecular hydrogen bonds: their SH groups are intramolecularly H-bonded solely to the sulfide groups bridging thiophenolic units. The enthalpy of this bonding, evaluated from Iogansen’s rule, amounts to ca. 1.5 kcal mol⁻¹ per one SH···S bond, which about four times smaller than the enthalpies of cooperative intramolecular H-bonds formed by related calixarenes and thiacalixarenes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Reaction of 4,6-bis(tert-butyl)-2,2,2-trichlorobenzo[d]-1,3,2-dioxaphosphole with phenylacetylene. ipso-Substitution of the tert-butyl group

The reaction of 4,6-bis(tert-butyl)-2,2,2-trichlorobenzo[d]-1,3,2-dioxaphosphole with phenylacetylene follows the mechanism of ipso-substitution of the tert-butyl group that is in para-position relative to the endocyclic O atom of the heterocycle, predominantly yielding 8-(tert-butyl)-2,6-dichloro-2-oxo-4-phenylbenzo[e]-1,2-oxaphosphorinine (NMR data). The structure of its hydrolysis product, 8-(tert-butyl)-6-chloro-2-hydroxy-2-oxo-4-phenylbenzo[e]-1,2-oxaphosphorinine, was proved by X-ray diffraction analysis.     

Synthesis and thermal properties of asymmetrical azo-peresters

Abstract  

New asymmetrical azo-perester derivatives of tert-butyl and tert-amyl hydroperoxides were obtained by reacting azo acids with hydroperoxides in the presence of N,N′-carbonyldiimidazole. The obtained azo-peresters possess two labile functional groups: the azo group and the perester group. Data from dynamic differential scanning calorimetry (DSC) experiments indicate that the azo groups decompose at somewhat lower temperatures than the perester groups.     

Photoinitiated processes in 1-p-tolylsulfonylazo-2,4,6,8-tetrakis(tert-butyl)phenoxazine

New photochromic compound 1-p-tolylsulfonylazo-2,4,6,8-tetrakis(tert-butyl)phenoxazine containing the intramolecular hydrogen bond NH...N and the corresponding model structures 2,4,6,8-tetrakis(tert-butyl)-1-(veratroylazo)phenoxazine and 2,4,6,8-tetrakis(tert-butyl)-N-acetyl-1-(p-tolylsulfonylazo)phenoxazine were synthesized and studied. The data obtained suggested the mechanism of the photoreaction resulting in the accumulation of betaine 1-hydroxy-2,4,6,8-tetrakis(tert-butyl)-10-tolylsulfonylphenoxazin-9-one. The photochromic transformations in the molecule under study are due to intramolecular proton phototransfer followed by E–Z-isomerization about the N–N bond and the formation of betaine 1-hydroxy-2,4,6,8-tetrakis(tert-butyl)-10-tolylsulfonylphenoxazin-9-one. The molecular and crystal structure of the photoproduct was studied by X-ray analysis.     

Photophysical property and photostability of J-aggregate thin films of thiacyanine dyes prepared by the spin-coating method

By use of electrostatic interactions of dye molecules and poly(diallyldimethylammonium chloride) (PDDA), the spin-coating technique has been successfully applied to the preparation of stable J-aggregate thin films of thiacarbocyanine dyes on a polycarbonate or quartz plate. The J-aggregate thin films were prepared by the spin-coating of PDDA aqueous solution on dye thin films prepared on a substrate by the spin-coating of 2,2,3,3-tetrafluoro-1-propanol solution of dyes. Photophysical properties of the dye thin films and J-aggregate thin films were studied by measuring the fluorescence spectra, quantum yields, and lifetimes. Coherent size of the J-aggregates was estimated to be 3-12 by means of the absorption bandwidth (full width at half maximum) or radiative lifetime. Photostability of the J-aggregate thin films was also studied in terms of photodegradation efficiency under argon and oxygen in comparison with the dye thin films, and J-aggregate thin films were found to be more stable than the corresponding dye thin films.     

Photo-controlled/living radical polymerization of tert-butyl methacrylate in the presence of a photo-acid generator using a nitroxide mediator

The photo-controlled/living radical polymerization of tert-butyl methacrylate was performed using a (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) initiator and a 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) mediator in the presence of a (4-tert-butylphenyl)diphenylsulfonium triflate photo-acid generator. The bulk polymerization was carried out at 25 °C by irradiation with a high-pressure mercury lamp. Whereas the polymerization in the absence of MTEMPO produced a broad molecular weight distribution, the MTEMPO-mediated polymerization provided a polymer with a comparatively narrow molecular weight distribution around 1.4 without elimination of the tert-butyl groups. The living nature of the polymerization was confirmed on the basis of the linear correlations for the first-order time–conversion plots and conversion–molecular weight plots in the range below 50% conversion. The block copolymerization with methyl methacrylate also supported the livingness of the polymerization based on no deactivation of the prepolymer.