ChemInform Abstract: Effects of Scandium Substitution on the Crystal Structure and Luminescence Properties of LuBO3:Ce3+.

Crystals of Lu_1-xSc_xBO₃:Ce (x = 0.2, 0.5, 0.7) are prepared by the Czochralski method and characterized by single crystal XRD, Raman spectroscopy, and vacuum UV excitation spectroscopy.     

Structure of a new intermediate Lu2 + xS3 phase

A new intermediate phase in the Lu-S system, Lu_{2 + x}S₃, between the sulfur-rich end of the monosulfide homogeneity range and Lu₂S₃ was found to be isostructural with Sc₂S₃. The structure of Lu_{2 + x}S₃ is based upon the NaCl-type with a 12 times larger orthorhombic unit cell due to ordering on the vacant lutetium sites, and with ordered vacancies that differentiate it from Sc₂S₃.     

Introducing a New d0 Sc3+ Asymmetric Ion for Functional Materials: Large Birefringence Enhancement by ScO6 in Ba3Sc2(BO3)4

Transition metal ions with d⁰ electronic states (Ti⁴⁺, Zr⁴⁺, Nb⁵⁺ and Ta⁵⁺) are widely investigated as functional materials. This work first illustrates that Sc³⁺ ion, long-time ignored, displays a second-order Jahn-Teller (SOJT) effect similar to asymmetric oxide-coordinated transition metal ions, thus providing a new ground to seek for asymmetric functional materials with enhanced performances. In Ba₃Sc₂(BO₃)₄, BO₃ groups are parallelly arranged, satisfying the ideal arrangement to produce large birefringence. Importantly, distorted octahedral ScO₆ with Sc³⁺ ion in its d⁰ electronic state enlarges birefringence unexpectedly up to 0.149 @ 550 nm, which is larger than previously reported borates containing solely BO₃, even to B₃O₆ units. Subsequently, the SOJT influence of distorted ScO₆ octahedra on birefringence is verified by a comparison between experimental data and theoretical calculations. In addition, Ba₃Sc₂(BO₃)₄ also displays a high transmittance in the range of 230 nm–3.5 μm with a UV cut-off wavelength at 198 nm and a large laser induced damage threshold (2.7 GW/cm²), comparable to α-BaB₂O₄. Above characteristics imply that the title compound may be a promising birefringent material.     

Oxygen permeability, thermal expansion and mixed conductivity of GdxCe0.8−xPr0.2O2−δ, x=0, 0.15, 0.2

The non-linear thermal expansion behaviour observed in Ce_1−yPr_yO_2−δ materials can be substantially controlled by Gd substitution. Coulometric titration shows that the charge compensation mechanism changes with increasing x, in the system Gd_xCe_0.8−xPr_0.2O_2−δ. For x=0.15, charge compensation is by vacancy formation and destabilises the presence of Pr⁴⁺. At x=0.2, further Gd substitution is charge compensated by additionally raising the oxidation state of Pr rather than solely the creation of further oxygen ion vacancies. Oxygen concentration cell e.m.f. measurements in an oxygen/air potential gradient show that increasing Gd content decreases ionic and electronic conductivities. Ion transference numbers measured under these conditions show a positive temperature dependence, with typical values t_o=0.90,0.98 and 0.80 for x=0,0.15 and 0.2, respectively, at 950 °C. These observations are discussed in terms of defect association. Oxygen permeation fluxes are limited by both bulk ambipolar conductivity and surface exchange. However, the composition dependent trends in permeability are shown to be dominated by ambipolar conductivities, and limited by the level of electronic conductivity. At the highest temperatures, oxygen permeability of composition x=0.2 approaches that of composition x=0, Ce_0.8Pr_0.2O_2−δ, with specific oxygen permeability values approximately 2×10⁻⁹ mol s⁻¹ cm⁻¹ at 950 °C, but offering much better thermal expansion properties.     

The dependence of persistent phosphorescence on annealing temperatures in CaTiO3:Pr nanoparticles prepared by a coprecipitation technique

Red emitting phosphors of CaTiO₃:Pr³⁺ nanoparticles with size ranging from 6 to 95 nm have been prepared by a coprecipitation technique and structurally characterized by X-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. The fluorescence and phosphorescence of CaTiO₃:Pr³⁺ nanoparticles as a function of annealing temperature are investigated. It is found that fluorescence intensities monotonously increase with increasing temperature. However, a maximum in phosphorescence with the increase of annealing temperature occurs for the sample prepared at 700 °C. Based on the measurement of fluorescence emission, fluorescence excitation and reflectance spectra as well as time decay patterns of fluorescence and phosphorescence, it is demonstrated that the dependence of fluorescence and phosphorescence on annealing temperature originates from the decrease of surface defects with the increase of temperature.     

Potentiometric and spectral studies of complex formation of La(III), Pr(III) and Lu(III) with aspartic acid and asparagine

The composition and stability of La³⁺, Pr³⁺ and Lu³⁺ complexes with aspartic acid and asparagine were analysed. The formation of complexes of the typeML andMHL was determined for La³⁺ and Pr³⁺ with aspartic acid, and of the typeMHL for Lu³⁺ with aspartic acid. For La³⁺, Pr³⁺ and Lu³⁺ with asparagine the formation ofML(OH) complexes was observed. By means of¹H NMR and¹³C NMR studies the participation in the coordination of both -COOH groups was determined for aspartic acid, whereas for asparagine the participation of the -COOH group was determined in complexes with La³⁺, Pr³⁺, and of the -COOH and the -NH₂ groups in the complex with Lu³⁺.

---

Potentiometrische und spektroskopische Untersuchungen an La(III), Pr(III) und Lu(III)-Komplexen von Asparaginsäure und Asparagin

Zusammenfassung Die Zusammensetzung und die Stabilität von La³⁺, Pr³⁺ und Lu³⁺-Komplexen mit Asparaginsäure und Asparagin wurden untersucht. Es wurde die Bildung von La³⁺ und Pr³⁺-Komplexen des TypsML undMHL, und ein Lu³⁺-Komplex des TypsMHL mit Asparaginsäure festgestellt. Für diese drei Lanthaniden wurde auch die Bildung von Komplexen des TypsML(OH) mit Asparagin beobachtet. Mit Hilfe von¹H-NMR und¹³C-NMR-Untersuchungen wurde für Asparaginsäure die Teilnahme der beiden -COOH-Gruppen, für Asparagin die Teilnahme der -COOH-Gruppe in den Komplexen mit La³⁺, Pr³⁺ und der-COOH und -NH₂-Gruppen in dem Komplex mit Lu³⁺ an der Koordinierung festgestellt.

     

An insight into the structure,conductivity and ion dynamics of Sr-Sm co-doped ceria oxygen ion conductors: Effect of defect interaction

In this work, we investigate the structure, conductivity and ion dynamics of mixed di and tri-valent doped Ce_0.8Sm_0.2-xSr_xO_2-δ (x = 0–0.2) oxygen ion conductors. The lattice parameter and root mean square strain are significantly affected by the ionic radius of dopants and their solubility into ceria lattice. Due to the solubility limit of Sr²⁺ ions, SrCeO₃ phase increases with the doping concentration of Sr²⁺. The increase of Sr²⁺ ions into ceria lattice promotes the formation of large defect clusters by expense of formed oxygen vacancies. The coulombic interaction between oxygen vacancies with substituted dopant cations enhances with Sr²⁺ ions due to decrease of the value of dielectric constant of the compositions. The defect interaction significantly affects the conductivity values by means of increase of SrCeO₃ phase and defect clusters. The conductivity values are found to be consistent with the migration and association energy. The scaled spectra of dielectric tangent loss and real part of complex conductivity confirm the temperature and defect interaction independent nature of hoping mechanism in the compositions.     

Frenkel Defect-modulated Anti-thermal Quenching Luminescence in Lanthanide-doped Sc2(WO4)3

Although large amount of effort has been invested in combating thermal quenching that severely degrades the performance of luminescent materials particularly at high temperatures, not much affirmative progress has been realized. Herein, we demonstrate that the Frenkel defect formed via controlled annealing of Sc₂(WO₄)₃:Ln (Ln=Yb, Er, Eu, Tb, Sm), can work as energy reservoir and back-transfer the stored excitation energy to Ln³⁺ upon heating. Therefore, except routine anti-thermal quenching, thermally enhanced 415-fold downshifting and 405-fold upconversion luminescence are even obtained in Sc₂(WO₄)₃:Yb/Er, which has set a record of both the Yb³⁺-Er³⁺ energy transfer efficiency (>85 %) and the working temperature at 500 and 1073 K, respectively. Moreover, this design strategy is extendable to other hosts possessing Frenkel defect, and modulation of which directly determines whether enhanced or decreased luminescence can be obtained. This discovery has paved new avenues to reliable generation of high-temperature luminescence.     

On the sol–gel synthesis and catalytic activity of Ce1−xAxO2−δ (A = Pr, Sm, Gd) SOFCs anode materials for reforming of methane

A sol–gel route to synthesize nanocrystalline praseodymium-, samarium- and gadolinium-doped ceria powders for solid oxides fuel Cells SOFCs is presented. The method involves metal nitrates with propionic acid (both as chelating ligand and solvent), gel formation, liquid nitrogen quenching, drying at 150 °C/24 h, and finally decomposition at 450 °C in nitrogen followed by calcination at 650 °C in air. TG–DTA, BET, XRD, FTIR, UV–vis and catalytic tests were used to characterize the samples. Ce_0.8Pr_0.2O_2?δ sample exhibited the best catalytic performance in methane steam reforming under water deficient conditions, closely followed by Ce_0.9Gd_0.1O_2?δ, Ce_0.8Sm_0.2O_2?δ and Ce_0.8Gd_0.2O_2?δ catalysts. The superior catalytic performance of Ce_0.8Pr_0.2O_2?δ sample was attributed to the existence of praseodymium species (Pr⁴⁺/Pr³⁺) strongly interacting with ceria. The two systems act synergistically in the catalytic steam reforming of methane.     

Physicochemical properties and catalytic performance of Pr2 − x SrxCoO4 ± y mixed oxides for NO reduction by CO

Using the polyglycol gel method, a series of Pr_{2 − x} Sr_xCoO_{4 ± y} (0.2 ≤ x ≤ 1.0) mixed oxides were prepared, and their catalytic activities were studied in the test reaction of NO reduction by CO. The solid-state physicochemical properties, including crystal structure, defect structure, IR spectrum, valence state of B-site ions, nonstoichiometry oxygen (y), oxygen species, and redox properties, were characterized by means of XRD, IR, TPD, TPR, XPS, and chemical analysis. The results show that all mixed oxides display a K₂NiF₄ structure. When x = 0.2 and 1.0, the obtained samples still have little uncertain mixed oxides; however, the mixed oxides (x = 0.4, 0.6, 0.8) all represent a single A₂BO₄ phase. With the increase of x, lattice parameters, unit-cell volume, and average crystalline size decrease gradually, whereas microstrain density, the concentration of Co³⁺, the amounts of lattice oxygen released and the concentration of oxygen vacancy increase. The catalytic activities of Pr_{2 − x} Sr_xCoO_{4 ± y} catalysts for NO reduction by CO are closely correlated with oxygen vacancy and the concentration of Co³⁺. Published in Russian in Kinetika i Kataliz, 2006, Vol. 47, No. 3, pp. 431–437. The text was submitted by the authors in English.     

Ionic liquid-based hydrothermal synthesis of Lu2O3 and Lu2O3:Eu3+ microcrysals

Uniform and well-defined Lu₂O₃ and Lu₂O₃:Eu³⁺ microarchitectures have been successfully synthesized via a green and facile ionic liquid-based hydrothermal method followed by a subsequent calcination process. Novel 3D micro-rodbundles and 1D microrods of Lu₂O₃ and Lu₂O₃:Eu³⁺ were controllably obtained through this method. X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and photoluminescence spectra were used to characterize the micromaterials. The proposed formation mechanisms have been investigated on the basis of a series of SEM studies of the products obtained at different hydrothermal durations. The results indicated that hydrothermal temperature and the ionic liquid-tetrabutylammonium hydroxide were two key factors for the formation as well as the morphology control of the Lu₂O₃ and Lu₂O₃:Eu³⁺ microarchitectures.     

The conductance of lanthanide (III) sulfate solutions in D2O

The formation constants of the LnSO ₄ ⁺ complexes are reported for La³⁺, Pr³⁺, Sm³⁺, Dy³⁺, Yb³⁺, and Lu³⁺ in D₂O and for Sm³⁺ and Lu³⁺ in water at 25°C. Formation constants which were calculated from conductance data are identical with those obtained in H₂O within the limits of the assumptions made in the mathematical analysis.     

Electrotransport properties of SOFC cathode materials based on lanthanum cuprate doped with praseodymium and strontium oxides

A complex study of thermal, conducting, and electrocatalytic properties of cuprates La_1.8?xPr_xSr_0.2CuO_4–δ (х = 0.2; 0.4) with the K₂NiF₄ structure is carried out in order to assess their prospects as the cathode materials for solid-oxide fuel cells. The thermal analysis reveals stability of samples heated up to 950°С in air. The conductivity of cuprates measured in the temperature range of 100–900°С and the partial oxygen pressure from 10^–3 to 1 atm is of the metallic nature and varies from 70 to 40 S/cm in the temperature interval of 500–900°С in air. The studies of chemical stability of cuprates with respect to solid electrolytes demonstrate the absence of their chemical interaction with Ce_0.9Gd_0.1O_1.95 (GDC) at 900°С and with La_0.8Sr_0.2Ga_0.85Mg_0.15O_3–δ (LSGM) at 1000°C after 25 h annealing. For La_1.6Pr_0.2Sr_0.2CuO_4–δ electrodes deposited on the surface of GDC or LSGM solid electrolytes, the studies of electrocatalytic activity in the oxygen reduction reaction demonstrate that the smallest polarization resistance is typical of electrodes deposited on the GDC surface.     

Perovskite-like La1−xKxMnO3 and related compounds: Solid state chemistry and the catalysis of the reduction of NO by CO and H2

The new compounds La_1?xM_xMnO₃ (0.05 ? x ? 0.4 for M = K; x = 0.2 for M = Na, Rb) have been prepared. La_1?xK_xMnO₃ (0.05 ? x ? 0.4), LaMnO_3.01, LaMnO_3.15, La_0.8Na_0.2MnO₃, and La_0.8Rb_0.2MnO₃ have been used as catalysts in the reduction of NO. La_0.8K_0.2MnO₃ has also been used in the catalytic decomposition of NO. The activity of these catalysts is related to the presence of a Mn³⁺/Mn⁴⁺ mixed valence and to the relative ease of forming oxygen vacancies in the solid. The presence of cation vacancies in LaMnO_3.15 and the substitution of La³⁺ by alkali ions in LaMnO₃ increases the catalytic activity. The reduction of NO involves both molecular and dissociative adsorption of NO.     

Strong f‐f Excitation and Bright Red Emission in Cd4Gd1‐xEuxO(BO3)3 (0≤x≤1): Near‐UV LED Pumped Red Phosphor with Low Thermal Quenching

Searching efficient red phosphors under near‐UV or blue light excitation is practically important to improve the current white light‐emitting diodes (WLEDs). Eu²⁺‐ and Mn⁴⁺‐based red phosphors have been extensively studied. Here we proposed that Eu³⁺ is also a promising activator when it resides on a noncentrosymmetric coordination site. We proved that Cd₄GdO(BO₃)₃ is a good host, which has a significantly distorted coordination for Eu³⁺. A careful crystallographic study was performed on the solid solutions of Cd₄Gd_1‐xEu_xO(BO₃)₃ (0≤x≤1) by Rietveld refinements. The as‐doped Eu³⁺ cations locate at the Gd³⁺ site and are well separated by CdO₈, CdO₆ and BO₃ groups; thus, only a slight concentration quenching was observed at ≈80 atom % Eu³⁺. Most importantly, the parity‐forbidden law of 4f‐4f transitions for Eu³⁺ are severely depressed, thus the absorptions at ≈393 and ≈465 nm are remarkable. Cd₄Gd_0.2Eu_0.8O(BO₃)₃ can be pumped by a 395 nm LED chip to give a bright red emission, and when mixed with other commercial blue and green phosphors, it can emit the proper white light (0.3657, 0.3613) with a suitable R_a≈87 and correlated colour temperature ≈4326 K. In‐situ photoluminescence study indicated the low thermal quenching of these borate phosphors, especially under 465 nm excitation. Our case proves the practicability to develop near‐UV excited red phosphors in rare‐earth‐containing borates.     

Effect of infiltration material on a LSM15/CGO10 electrochemical reactor in the electrochemical oxidation of propene

The effect of infiltrating on a La_0.85Sr_0.15MnO₃/Ce_0.9Gd_0.1O_1.95 11-layer electrochemical reactor with CeO₂ and Ce_0.8Pr_0.2O_2?δ was studied in propene oxidation at open-circuit voltage and under polarization as a function of reaction temperature. This work outlined the importance of catalytic and electrochemical properties of infiltrated material on the ability to increase propene conversion under polarization with good faradaic efficiency. Electrochemical impedance spectroscopy was used to study the effect of infiltration material on electrode properties. The infiltration of a mixed ionic and electronic conductor, like Ce_0.8Pr_0.2O_2?δ , increased the electrode performance at low temperature but decreased the lifetime of the oxygen ion promoters on the catalyst/electrode surface, reducing the faradaic efficiency of the reaction. The infiltration of CeO₂ provided high propene conversion at open circuit and high effect of polarization associated with good faradaic efficiency, especially at low temperature.     

Pr(BO2)3 und PrCl(BO2)2: Zwei meta‐Borate des Praseodyms im Vergleich

Pr(BO₂)₃ and PrCl(BO₂)₂: Two Praseodymium meta‐Borates in Comparison Single‐crystalline PrCl(BO₂)₂ can be obtained by the reaction of praseodymium, Pr₆O₁₁ and PrCl₃ with a small excess of B₂O₃ in evacuated silica tubes after seven days at 850 °C. If NaCl is additionally used as flux, single crystals of Pr(BO₂)₃ dominate the main product. Both praseodymium(III) meta‐borates are air and water stable. The crystals of PrCl(BO₂)₂ emerge as long, thin, pale green needles which tend to severe twinning due to their fibrous habit. The crystal structure (triclinic, P1¯; a = 420.56(4), b = 655.42(7), c = 808.34(8) pm, α = 82.361(8), β = 89.173(9), γ = 71.980(7)°, Z = 2) exhibits zigzag chains {[(B1)o^t_1/1O^e_2/2(B2)O^t_1/1O^e_2/2]²⁻} (≡ {[BO₂]⁻}) of corner‐linked [BO₃]³⁻ triangles with syndiotactic orientation of the terminal oxygen atoms which are running parallel to the [100] direction. The Pr³⁺ cations are surrounded by three Cl⁻ and seven O²⁻ anions with the shape of a tetracapped trigonal prism. The green, transparent crystals of Pr(BO₂)₃ (monoclinic, C2/c; a= 984.98(9), b = 809.57(8), c = 641.02(6) pm, β = 126.783(9)°, Z = 4) appear either lath‐shaped or rather spherical. In the crystal structure the B³⁺ cations reside both in trigonal planar as well as in tetrahedral coordination of oxygen atoms. Both types of borate polyhedra ([BO₃]³⁻ and [BO₄]⁵⁻) are linked via corners to form chains of the composition {[(B2)‐O^t_1/1O^e_2/2(B1)O^e_4/2(B2)O^t_1/1O^e_2/2]³⁻} (≡ {[BO₂]⁻}) which run parallel [101]. The coordination sphere of the Pr³⁺ cations consists of ten oxide anions which build up a bicapped square antiprism.     

Electrode performance and X-ray absorption spectroscopy of La0.8Sr0.2Mn1−x Cu x O3 (0 ≤ x ≤ 0.2)–GDC composite cathodes for SOFCs

Electrochemical properties of composite cathodes consisting of La_0.8Sr_0.2Mn_1?x Cu _x O₃ (LSMCu, 0?≤?x?≤?0.2) and Ce_0.8Gd_0.2O_2?x (GDC) were determined by impedance spectroscopy, and conduction mechanism for the composite cathodes was investigated by a near-edge X-ray absorption fine-structure analysis (NEXAFS). LSMCu–GDC cathodes showed lower polarization resistance (R _p) than LSM–GDC up to 750 °C, whereas they exhibited better performance at higher temperature (≥800 °C). The best performance was achieved with the LSMCu10–GDC cathode: 0.27 and 0.08?Ω cm² at 800 °C and 850 °C, respectively. NEXAFS and refinement results confirmed that Cu doping caused the oxidation of Mn³⁺ to Mn⁴⁺ and lattice contraction. This additional Mn⁴⁺ can lead to the formation of oxygen vacancies when Mn⁴⁺ is converted to Mn³⁺ at relatively high temperatures (above 600 °C). This in turn contributes to improved oxygen ion transport in LSM. The LSMCu–GDC composite cathode can thus be considered a suitable potential cathode for SOFC applications.     

Preparation,characterization and luminescent properties of spherical CaTiO3:Pr3+ phosphors by spray pyrolysis

In this paper, spherical Pr³⁺-doped CaTiO₃ phosphor particles were fabricated through a two-step spray pyrolysis process, using citric acid and polyethylene glycol (PEG) as additives. X-ray diffraction (XRD), scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), thermogravimetric and differential thermal analysis (TG–DTA), X-ray photoelectron spectra (XPS), photoluminescence (PL), cathodoluminescence (CL) spectroscopy, and lifetime measurements were employed to characterize these samples. The results reveal that the as-prepared CaTiO₃:Pr³⁺ phosphors are spherical with submicron particle size. The particles show a strong red emission corresponding to ¹D₂–³H₄ (612 nm) of Pr³⁺ under the ultraviolet excitation (325 nm) and low voltage electron beams (1–5 kV). Furthermore, the morphology, PL and CL intensities of the CaTiO₃:Pr³⁺ phosphors can be tuned by altering the concentration of PEG, annealing temperature, and acceleration voltage. These phosphors show potential applications in the field of field emission displays (FEDs).     

Synthesis and optical properties of Gd2O3:Pr3+ phosphor particles

Spherical-shaped Gd₂O₃:Pr³⁺ phosphor particles were prepared with different concentrations of Pr³⁺ using the urea homogeneous precipitation method. The resulting Gd₂O₃:Pr³⁺ phosphor particles were characterized by X-ray diffraction, field emission scanning electron microscope, and photoluminescence spectroscopy. The effects of the Pr³⁺ doping concentration on the luminescent properties of Gd₂O₃:Pr³⁺ phosphors were investigated. Photoluminescence measurements revealed the Gd₂O₃:1?% Pr³⁺ phosphor particles to have the strongest emission. The luminescence properties of Gd₂O₃:Pr³⁺ particles are strongly affected by the phosphor crystallinity and X-ray diffraction measurements confirmed that the crystallinity of Gd₂O₃ cubic structure could be enhanced by increasing the firing temperature. The luminescent Gd₂O₃:Pr³⁺ phosphor particles have potential applications in areas, such as optical display systems, lamps and etc.