Physico-chemical and structural properties of hydrogels formed by chitosan, in the presence and absence of poly(vinylpyrrolidone) and sodium decylsulfate

The structure of chemically-crosslinked chitosan and chitosan-poly(vinylpyrrolidone) (PVP) hydrogels is investigated by means of the combined use of small-angle neutron scattering (SANS), electron paramagnetic resonance spectroscopy (EPR), intradiffusion, and swelling degree measurements. These hydrogels may be described in terms of an inhomogeneous structure composed by polymer-rich and polymer-poor regions. The polymer-rich regions, whose correlation distance zeta is ranged between approximately 600 and approximately 850 A, are, in turn, characterized by the presence of a network formed by the chemical crosslinks, with a mean correlation distance xi approximately 90 A. The structures of chitosan and chitosan-PVP hydrogels have also been analyzed in the presence of sodium decylsulfate micelles that could provide a multidomain system useful, in principle, for drug delivery applications. Both SANS and EPR measurements show that sodium decylsulfate micelles do not significantly interact with both the gels. Finally, intradiffusion and swelling degree measurements show an improved hydrophilicity of chitosan-PVP gels, even further magnified by the presence of C10OS surfactant.     

Diffusion coefficients of sodium dodecyl sulfate in water swollen cross-linked polyacrylamide membranes

Diffusion of aqueous sodium dodecyl sulfate (SDS) across cross-linked polyacrylamide hydrogel membranes has been studied by electrical conductivity measurements. Initial rapid sorption of SDS (as unimer) into the membranes is observed. The effect of SDS concentration, and of cross-linker fraction on the degree of swelling of the gels is studied and associated with binding of the surfactant to the polymer, with surface bound water suggested to be involved in these interactions. Below the surfactant critical micelle concentration, volume collapse of less cross-linked membranes is observed, and associated with aggregate formation. Fluorescence measurements using pyrene as a probe show that micellar aggregates do not diffuse through the membrane, and only overall unimer diffusion is observed. The effect of cross-linking on the diffusion process is discussed.     

Nanostructuring of CyPLOS (Cyclic Phosphate-Linked OligoSaccharides), novel saccharide-based synthetic ion transporters

Ionophores are an important class of synthetic molecules which mimic natural ion channels or carriers. Here we report the aggregation behavior in pseudo-physiological environment of three Cyclic Phosphate-Linked Oligosaccharides (CyPLOS) derivatives, synthetic ion transporters based on cyclic, phosphate-linked disaccharide skeleton differing for the nature of the tails (tetraethylene-TEG glycol and/or n-undecyl chains) attached to the C-2 and C-3 of the constitutive monosaccharides. Their aggregation behavior has been studied by a combined use of dynamic light scattering (DLS), electron paramagnetic resonance spectroscopy (EPR) and Small Angle Neutron Scattering (SANS). DLS measurements were performed to reveal the formation and size distribution of the CyPLOS aggregates. EPR measurements, by using 5-doxyl stearic acid (5-DSA) as spin-probe, showed that the aggregates are mainly due to the formation of double layers and allowed to analyze the local fluidity. Finally, SANS measurements allowed estimating the layer thickness of the double layers. Our results indicate that the three CyPLOS analogs show self-aggregation properties that depend on the different nature of the inserted tails.     

Effect of the nature of the counterion on the properties of anionic surfactants. 5. Self-association behavior and micellar properties of ammonium dodecyl sulfate

Micelles formed in water from ammonium dodecyl sulfate (AmDS) are characterized using time-resolved fluorescence quenching (TRFQ), electron paramagnetic resonance (EPR), conductivity, Krafft temperature, and density measurements. TRFQ was used to measure the aggregation number, N, and the quenching rate constant of pyrene by dodecylpyridinium chloride, k(Q). N depends only on the concentration (C(aq)) of ammonium ions in the aqueous phase whether these counterions are derived from the surfactant alone or from the surfactant plus added ammonium chloride as follows: N = N0(C(aq)/cmc0)(gamma), where N0 is the aggregation number at the critical micelle concentration in the absence of added salt, cmc0, and is equal to 77, 70, and 61 at 16, 25, and 35 degrees C, respectively. The exponent gamma = 0.22 is independent of temperature in the range 16 to 35 degrees C. The fact that N depends only on C(aq) permits the determination of the micelle ionization degree (alpha) by employing various experimental approaches to exploit a recent suggestion (J. Phys. Chem. B 2001, 105, 6798) that N depends only on C(aq). Utilizing various combinations of salt and surfactant, values of alpha were obtained by finding common curves as a function of C(aq) of the following experimental results: the Krafft temperature, N, k(Q), the microviscosity of the Stern layer determined from the rotational correlation time of a spin probe, 5-doxyl stearic acid methyl ester, and the spin-probe sensed hydration of the micelle surface. The values of alpha, determined from applying the aggregation number-based definition of alpha to all of these quantities, were within experimental uncertainty of the values alpha = 0.19, 0.20, and 0.21 derived from conductivity measurements at 16, 25, and 35 degrees C, respectively. The volume fraction of the Stern layer occupied by water decreases as N increases. For AmDS micelles, both the hydration and its decrease are predicted by a simple theory of micelle hydration by fixing the parameters of the theory for sodium dodecyl sulfate and employing no further adjustable parameters. For a given value of N, the hydration decreases as the temperature increases.     

Sorption/diffusion behaviour of anionic surfactants in polyacrylamide hydrogels: from experiment to modelling

The sorption and diffusion processes of anionic surfactants with different chain length through polyacrylamide hydrogels with low swelling degree have been studied by electrical conductivity measurements. The multicomponent equilibrium equation has been used to model the sorption isotherms of different anionic surfactant in the hydrogels. Such isotherms show that initial rapid sorption of unimer surfactant into the membranes occurs, suggesting that non-freezing water can be involved in these interactions. In aqueous solution, at concentrations near and above the critical micelle concentration an anti-co-operative region is found. The diffusion coefficients of the anionic surfactants inside the hydrogel matrix show that the mobility of diffusing surfactant entities is dependent on cross-linker concentration and chain length. The Cukier hydrodynamic model and the free volume theory as modified by Peppas and Reinhart were applied to explain the dependence of the diffusion coefficients of surfactant on surfactant concentration inside the hydrogel. The hydrodynamic model was applied with success to the more hydrophilic surfactant, sodium 1-octanesulfonate, showing that the diffusion coefficients, D, increase when the resistance to hydrodynamic medium decreases; when the surfactant chain length increases (sodium dodecyl sulfate and sodium 1-hexadecane sulphonate) the variation of D with the free volume can only be understood considering the sieving effect produced by the surfactant inside gel.     

Local dynamics of micelles of new long-chain surfactants in aqueous media

The molecular dynamics, organization, and phase state of aqueous solutions of new long-chain cationic surfactants with saturated hydrocarbon radicals (from C₁₆ to C₂₂) containing one or two hydroxyl groups in their polar heads are studied by the spin-probe EPR spectroscopy. In the region of micellar solutions, local mobility of surfactant molecules slightly changes with an increase in the length of hydrocarbon radical, whereas the order parameter of micelles increases notably. The addition of two hydroxyl groups to the polar part of long-chain (C ₂₂) surfactant molecule considerably decreases local mobility and increases the ordering of micellar system compared to the micelles of analogous surfactant with one hydroxyl group. Phase transition from micellar to a solid state is observed in this system with a decrease in temperature. The addition of KCl to aqueous surfactant solution lowers the local mobility, increases the order parameter of micelles, and can cause changes in the phase state of a system. In the presence of salt, the correlation time of probe rotation and its order parameter depend on surfactant concentration. Apparently, this is explained by changes in the shape of micelles upon variations in surfactant concentration.     

Surfactant head group and concentration influence on structure and dynamics of gellan gum hydrogels: Crossover from stretched to compressed exponential

In the present study, we have investigated the effects of surfactant addition on the structure and dynamics of gellan gum hydrogels. A strong interaction is seen between gellan gum and oppositely charged cationic surfactant, hexadecyltrimethylammonium bromide (CTAB) whereas rather weak or minimal interactions are observed when either anionic surfactant, sodium dodecylsulfate (SDS), or nonionic surfactant, Triton X-100 is added to the system. The dynamics of the hydrogels was studied, using dynamic light scattering measurements and the heterodyne method was used for data evaluation. The correlation function of parent hydrogel was fitted with a stretched exponential function, while a single plus stretched exponential function was employed to study the dynamics of hydrogel with surfactants and the corresponding relaxation times were appropriately analyzed. An interesting crossover from stretched to compressed exponential was seen when CTAB was added beyond critical micellar concentration to the system, which was not evidenced for the other two surfactants. Ensemble averaged intensity was also analyzed and the general picture that emerges is that the oppositely charged surfactant has the strongest ability to form large associations as oppose to nonionic and like-charged surfactants. The rheological measurements were carried out to determine the elastic response of the gels over a wide range of frequencies. It was seen that the elastic modulus was dependent on both the surfactant concentration and type. Cationic surfactant increased the elastic modulus markedly as opposed to the nonionic and anionic surfactants. These results may have implications for the use of polymer surfactant systems as potential products.     

Nanoscopic Characterization of Stearic Acid Release from Bovine Serum Albumin Hydrogels

The release behavior of 16‐doxyl stearic acid (16‐DSA) from hydrogels made from bovine serum albumin (BSA) is characterized. 16‐DSA serves as a model tracer molecule for amphiphilic drugs. Various hydrogel preparation procedures are tested and the fatty acid release from the different gels is compared in detail. These comparisons reach from the macroscopic level, the viscoelastic behavior via rheological characterization to changes on the nanoscopic level concerning the secondary structure of the protein during gelation through infrared (ATR‐IR) spectroscopy. 16‐DSA‐BSA interaction via continuous wave electron paramagnetic resonance (CW EPR) spectroscopy in addition gives a nanoscopic view of small molecule–hydrogel interaction. The combined effects of fatty acid concentration, hydrogel incubation time, and gelation procedures on release behavior are studied via CW EPR spectroscopy and dynamic light scattering (DLS) measurements, which provide deep insight on the interaction of 16‐DSA with BSA hydrogels and the nature and size of the released components, respectively. It is found that the release rate of the fatty acid from BSA hydrogels depends on and can thus be tuned through its loading percentage, duration of hydrogel formation and the type of gelation methods. All of the results confirm the potential of these gels as delivery hosts in pharmaceutical applications allowing the sustained release of drug.     

Composite hydrogels with temperature sensitive heterogeneities: influence of gel matrix on the volume phase transition of embedded poly-(N-isopropylacrylamide) microgels

The thermo-responsive behaviour of poly-(N-isopropylacrylamide) (PNiPAM) microgels embedded in covalently cross-linked non-temperature-sensitive polyacrylamide (PAam) hydrogel matrixes with different compositions was investigated by using small angle neutron scattering (SANS). The composition of the composite hydrogel was varied by (a) increasing the cross-linker and acrylamide concentration leading to strong hydrogel matrixes and (b) by increasing the microgel concentration to obtain composite gels with an internal structure. Additionally we synthesized composite hydrogels by using γ-irradiation as initiation for the polymerisation. This leads to the formation of chemical bonds between the PNiPAM microgels and the surrounding polyacrylamide matrix. Thus it is possible to synthesize hydrogels without an additional cross-linker, as well as pure particle networks. Some samples were prepared at two different temperatures, below and above the volume phase transition temperature of PNiPAM, resulting in highly swollen or totally collapsed microgels during the incorporation step. The volume phase transition of microgels is not influenced by a hydrogel matrix with high acrylamide concentration independent of the preparation temperature. However, an increased cross-linker concentration leads to a corset like constraint on microgel swelling. Microgels, which are embedded in the collapsed state (at 50 °C), are not able to swell upon cooling, whereas microgels embedded in the swollen state can collapse upon heating. For samples with an increased microgel concentration, the close microgel packing was disturbed by the formation of the polyacrylamide matrix. The hydrogel matrix squeezes the microgels together and leads to partial aggregation. The experiments demonstrate how composite hydrogels with stimuli-sensitive heterogeneities can be prepared such that the full responsiveness of the embedded microgels is retained while the macroscopic dimensions of the gel are not affected by the volume phase transition of the microgels.     

Synthesis and properties of a novel class of gemini pyridinium surfactants

A novel class of gemini pyridinium surfactants with a four-methylene spacer group was synthesized, and their surface-active properties and interactions with polyacrylamide (PAM) were evaluated by surface tension, fluorescence, and viscosity measurements. A comparison between the gemini pyridinium surfactants and their corresponding monomers was also made. The cmc's of gemini pyridinium surfactants are much lower than those of the corresponding monomeric surfactants. The C20 value is about one order of magnitude lower than that of corresponding monomers, and the longer the hydrophobic chains of the surfactants, the lower the cmc value. Surface tension measurements of the surfactant-PAM mixed systems show that the critical aggregation concentration (cac) value is much lower than the cmc value of the surfactant system alone. Viscosity measurements of the surfactant-PAM mixed systems show that the relative viscosity of the surfactant-PAM system decreased with increasing concentration of surfactant. Additionally, fluorescence measurements of the surfactant-PAM mixed system suggest the formation of surfactant-polymer aggregates, and the gemini pyridinium surfactant with longer hydrophobic chains have a stronger interaction with PAM, owing to the stronger hydrophobic interaction.     

Study of Cryostructuring of Polymer Systems: 25. The Influence of Surfactants on the Properties and Structure of Gas-Filled (Foamed) Poly(vinyl alcohol) Cryogels

Foamed poly(vinyl alcohol) (PVA) cryogels are studied. Such heterogeneous gel composites are formed as a result of the cryogenic treatment (freezing—storage in a frozen state—thawing) of water— PVA liquid foams in the absence and presence of surfactants. It is shown that the addition of ionic and nonionic surfactants to an aqueous PVA solution and its subsequent foaming result in the formation of liquid foam whose stability is lower than that of the foam prepared from an aqueous PVA solution in the absence of surfactant, i.e., surfactants cause a destabilizing effect on the foams containing PVA. Gas-filled PVA cryogels formed as a result of freezing—thawing of such foams contain large (up to ～180 μm) pores (air bubbles incorporated into the matrix of heterogeneous gel). Mechanical and thermal properties of cryogels depend on the nature and concentration of surfactants, as well as on the regime of cryogenic treatment. The rigidity of foamed PVA cryogels prepared in the presence of sodium dodecyl sulfate and cetyltrimethylammonium bromide ionic surfactants is lower and that in the presence of nonionic decaoxyethylene cetyl ether is higher than for equiconcentrated (by the polymer) foamed PVA cryogel containing no surfactant. Microscopic studies and the analysis of obtained images of cryogel structure demonstrate that the effect of surfactant on the morphology of freezing foam can be different, depending on the type of surfactant added to the initial system. This leads to foam-destabilizing effects such as the collapse, deformation, and coalescence of air bubbles; the failure of gel phase structure near the bubble surface; etc. However, the complete disintegration of the foamed structure is prevented by a very high viscosity of the unfrozen liquid microphase of a macroscopically solid sample and by the cryotropic PVA gelation that fixes the structure of partially destroyed foam.     

Size‐Controlled Fabrication of Polydiacetylene‐Embedded Microfibers on a Microfluidic Chip

A microfluidic technique was employed to fabricate polydiacetylene (PDA)‐embedded hydrogel microfibers. By taking advantage of calcium ion‐induced insoluble hydrogel formation, supramolecularly assembled diacetylene (DA)‐surfactant complexes were successfully immobilized in the calcium alginate fibers. Thus, instantaneous microfiber formation was observed when the core flow of DA supramolecules‐containing alginate solution met the sheath flow of calcium ions. UV irradiation of the resulting fibers afforded blue colored PDAs, and the formation of a conjugated polymer was confirmed by heat‐induced phase transition and by Raman spectroscopy. By adjusting the core and sheath flow rates, PDA‐embedded hydrogel fibers of various sizes were obtained.     

Solubilization of triglycerides in liquid crystals of nonionic surfactant

The solubilization of triglycerides [1,2,3-tributanoylglycerol (TBG) and 1,2,3-trihexanoylglycerol (THG)] in water/octa(oxyethylene) dodecyl ether (C(12)EO(8)) systems has been investigated. Oil-induced changes in the structure of liquid crystals in water/C(12)EO(8) system have been studied by optical observation and small-angle X-ray scattering (SAXS) measurements. In the water/C(12)EO(8)/oil systems, solubilization of THG and TBG induces a transition between H(1) (hexagonal) and L(alpha) (lamellar) liquid crystals at high C(12)EO(8) concentrations, whereas at low surfactant concentrations a H(1)-I(1) (discontinuous micellar cubic phase) transition occurs. This anomalous behavior is attributed to the partitioning of solubilized oil in the micelles. At low surfactant concentrations THG is mainly solubilized into the hydrophobic cores of the surfactant micelles, indicating high swelling or low penetration tendency, resulting in a steep increase in the radius of the aggregates (r(H)), thereby inducing a rod-sphere transition. At high surfactant concentrations, THG is not mainly solubilized into the core but distributed between the palisade layer and the core of the aggregates. The TBG is considerably solubilized into the surfactant palisade layer, indicating a high penetration tendency, resulting in an increase in the effective cross-sectional area per surfactant molecule, a(s). The thermal stability of the I(1) phase increases with the solubilization of THG into the aggregate cores. The percentage deviation of the experimental interlayer spacings (P(d)) from complete swelling was also evaluated for different triglycerides in the H(1) and L(alpha) phases or different surfactant concentrations. It is found that the penetration tendency of triglycerides could be used as a tuning parameter for I(1) phase formation depending on the surfactant concentration and the molecular weight of the oil.     

Investigation of temperature-responsivity and aqueous chromatographic characteristics of a thermo-responsive monolithic column

A thermo-responsive and macroporous monolithic cryogel was directly prepared by in situ free-radical redox cryo-polymerization in a stainless steel chromatographic column (100 mm × 4.6 mm i.d.) using N-isopropylacrylamide (NIPAAm) as functional monomer and PEG-20,000 as porogen at −12 °C. The internal morphology of resulting monolithic cryogel was estimated by scanning electron microscopy (SEM). Based on that, a submicron skeleton structure was observed. Besides, the gravimetrically determined rates of swelling/deswelling for thermo-responsive monolithic cryogel were much higher than that of hydrogel adopting the same component proportion via conventional method (25 °C for 24 h). Simultaneously, a temperature-dependent resolution of steroids was also achieved using only water as a mobile phase. The theoretical plate number of every analyte was more than 2000.     

On the growth and shape of sodium taurodeoxycholate micellar aggregates: a spin-label and quasielastic light scattering investigation

Electron spin resonance (ESR) and quasielastic laser scattering (QELS) measurements have been carried out on sodium taurodeoxycholate (NaTDC) micellar aqueous solutions. Computer simulation of the ESR line shape has been used to quantitatively analyze the rotational dynamics of the cholestan-spin label (CSL) dissolved by the NaTDC micellar aggregates as a function of temperature and NaCl concentration. The local reorientation of CSL has been accounted for motionally-averaged g- and A-tensors assuming fast oscillation around the spin-probe long molecular axis. The overall Brownian tumbling of CSL-micelle complexes has been modeled by an axially symmetric rotational tensor. Good agreement with experimental spectra is obtained. Best-fit rotational parameters and QELS data suggest that, in the circumstance of large aggregation, NaTDC micelles have cylindrical shape and micellar growth occurs along the cylinder axis.     

Nanostructured amorphous manganese oxide cryogel as a high-rate lithium intercalation host

Amorphous manganese oxides have received increasing attention in recent years as high-capacity intercalation cathodes for rechargeable lithium batteries. Nanostructured electrodes have been shown to exhibit enhanced rate capabilities. In this paper, a nanostructured amorphous manganese oxide cryogel is reported that combines the advantages of the amorphous structure and the nano-architecture, leading to high lithium intercalation capacity and high rate capability. The cryogel is prepared by freeze-drying a Mn(IV) oxide hydrogel formed in situ via reduction of sodium permanganate solution with solid fumaric acid. The cryogel exhibits a nanoporous structure and a specific surface area of 350 m²/g. X-ray and electron diffraction reveals the amorphous nature of this freeze-dried gel. The material exhibits specific capacities of 289, 217 and 174 mAh/g at C/100, C/5 and 2C rates, respectively, demonstrating high capacity and excellent rate capability. This work shows the feasibility of the freeze-drying method for obtaining manganese oxides with nano-architecture and high specific surface area, and suggests the promise of the synthesis route to nanostructured amorphous manganese oxides via a hydrogel.     

Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.     

Local mobility of micelles of new cationic surfactants and their interactions with hydrophobically modified polyacrylamides

The local dynamics and organization of micelles of new long-chain cationic surfactants with saturated hydrocarbon fragments (from C₁₆ to C₂₂) are investigated via the EPR spin-probe technique. The local mobility of spin probes in the hydrocarbon core of a micelle changes insignificantly, while the order parameter noticeably increases with lengthening of the hydrocarbon fragment of the surfactant molecule. The specific features of the interaction of the surfactants with network junctions of the gels formed by two types of hydrophobically modified polyacrylamides??either containing charged groups (sodium acrylate) in the backbone or lacking these groups??are studied. In both cases, the local mobility of network junctions of the gel increases after the introduction of the surfactant (C₁₈). Moreover, for surfactant with a long alkyl group (C₂), the microscopic viscosity of the gel based on the uncharged polymer decreases, although the local mobility of the network junctions increases. Possible causes of the observed specific features are discussed.     

Effect of glycerol on micelle formation by ionic and nonionic surfactants at 25 degrees C

The effect of glycerol on the micellization of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and of the ethoxylated nonionic surfactant Brij 58 has been investigated by various experimental techniques. For both surfactants the critical micellar concentration (cmc), determined by surface tension measurements, is almost unaffected by the presence of glycerol in the mixture; only at high glycerol concentrations (>/=20% w/w) does the cmc significantly increase. The area per surfactant molecule at the air-solution interface, A, increases with increasing glycerol weight percentage, w(g). Fluorescence quenching measurements indicate that the presence of glycerol induces a lowering of the aggregation number of both surfactants. The glycerol intradiffusion coefficient has been measured by the pulsed-gradient spin-echo NMR technique as a function of glycerol content at constant surfactant concentration. It is almost unaffected by the presence of the surfactants, indicating that no direct glycerol-surfactant interaction occurs in the mixture. The surfactant intradiffusion coefficient has been also measured. In the case of CTAB, it increases with increasing glycerol concentration, a reflection of the decreased aggregation number. For Brij 58, in spite of the lowering of the aggregation number, the surfactant intradiffusion coefficient decreases with increasing glycerol concentration, suggesting an increase of the intermicellar interaction. The experimental evidence shows that for both surfactants the micellization is affected by the presence of glycerol through an indirect, solvent-mediated mechanism. In the case of CTAB, the main effect of glycerol is a lowering of the medium dielectric constant, which enhances the electrostatic interactions in solution. In the case of Brij 58, the results can be interpreted in terms of a salting-out effect according to which glycerol competes with the surfactant for water molecules, causing a dehydration of the surfactant ethoxylic headgroup.