Selectivity of single, mixed, and modified pseudostationary phases in electrokinetic chromatography

The selectivity of a compilation of single, mixed, and modified EKC pseudostationary phases, described in the literature and characterized through the solvation parameter model, is analyzed. Not only have micellar systems of different nature been included but also microemulsions, polymeric, and liposomial phases. In order to compare the systems, a principal component analysis of the coefficients of the solvation equation is performed. From this analysis, direct information of the system properties, differences in selectivity, as well as evidence of lack of accuracy in some system characterizations are obtained. These results become a very useful tool to perform separations with mixtures of surfactants, since it is possible to know which mixtures will provide a greater selectivity variation by changing only the composition of the pseudostationary phases. Furthermore, the variation of the selectivity of some mixtures, as well as the effect of the addition of organic solvents on selectivity, is also discussed.     

Chromatographic characterization of hydrophilic interaction liquid chromatography stationary phases: hydrophilicity, charge effects, structural selectivity, and separation efficiency

Fourteen commercially available particle-packed columns and a monolithic column for hydrophilic interaction liquid chromatography (HILIC) were characterized in terms of the degree of hydrophilicity, the selectivity for hydrophilic-hydrophobic substituents, the selectivity for the regio and configurational differences in hydrophilic substituents, the selectivity for molecular shapes, the evaluation of electrostatic interactions, and the evaluation of the acidic-basic nature of the stationary phases using nucleoside derivatives, phenyl glucoside derivatives, xanthine derivatives, sodium p-toluenesulfonate, and trimethylphenylammonium chloride as a set of samples. Principal component analysis based on the data of retention factors could separate three clusters of the HILIC phases. The column efficiency and the peak asymmetry factors were also discussed. These data on the selectivity for partial structural differences were summarized as radar-shaped diagrams. This method of column characterization is helpful to classify HILIC stationary phases on the basis of their chromatographic properties, and to choose better columns for targets to be separated. Judging from the retention factor for uridine, these HILIC columns could be separated into two groups: strongly retentive and weakly retentive stationary phases. Among the strongly retentive stationary phases, zwitterionic and amide functionalities were found to be the most selective on the basis of partial structural differences. The hydroxyethyl-type stationary phase showed the highest retention factor, but with low separation efficiency. Weakly retentive stationary phases generally showed lower selectivity for partial structural differences.     

Nitration and amination of polyphenylene oxide: Synthesis, gas sorption and permeation analysis

A high degree of nitration of polyphenylene oxide (PPO) was successfully achieved by carefully optimizing synthetic protocol. The reduction of nitro group to amino could be done quantitatively. The physical properties of formed polymers were investigated and correlated with gas sorption and permeation properties. The formed polymers were amorphous in nature as revealed by wide angle X-ray diffraction spectra. An increase in the packing density in comparison to unsubstituted PPO as a result of induced polarity was indicated by lowering of fractional free volume and d-spacing. The substitution by either nitro or amino group increased the chain stiffness as revealed by the dynamic mechanical analysis. Though both, nitro and amino group substitution on PPO led to a decrease in pure gas permeability, the selectivity of various gas pairs was increased by these substitutions. The gas sorption analysis revealed that both, solubility selectivity and diffusivity selectivity were increased by these polar group substitutions. The nitro group substitution was more effective in improving solubility selectivity, while amino group substitution was more effective in improving diffusivity selectivity.     

Roles of surface Te, Nb, and Sb oxides in propane oxidation to acrylic acid over bulk orthorhombic Mo-V-O phase

The outermost surfaces and subsurface layers of the orthorhombic (M1) Mo-V-O catalysts promoted with Te, Nb, and Sb oxide species at submonolayer surface coverage were examined by low-energy ion scattering (LEIS). This study indicated that the Nb oxide species was preferentially located at the topmost surface, while the subsurface Te and Sb concentrations declined gradually into the bulk. Although the original Mo-V-O catalyst was essentially unselective in propane oxidation to acrylic acid, significant improvement in the selectivity to acrylic acid was observed when Te, Nb, and Sb oxides were present as the surface species at submonolayer coverage. These findings further suggested that the formation of the surface V-O-M bonds (M = Nb, Te, or Sb) was highly beneficial for both the activity and selectivity of the orthorhombic Mo-V-O catalysts in propane oxidation to acrylic acid. The highest selectivity was observed when both Nb and Te (or Sb) oxide species were present at the surface. The selectivity trends established for the surface-promoted Mo-V-O catalyst parallel those found previously for the corresponding bulk Mo-V-M-O catalysts. These results further indicated that the introduction of surface metal oxide species is a highly promising method to prepare well-defined model catalysts for studies of the structure-activity/selectivity relationships as well as optimize the catalytic performance of the bulk mixed Mo-V-M-O catalysts for selective (amm)oxidation of propane.     

Design, synthesis, and evaluation of in vivo potency and selectivity of epoxysuccinyl-based inhibitors of papain-family cysteine proteases

The papain-family cathepsins are cysteine proteases that are emerging as promising therapeutic targets for a number of human disease conditions ranging from osteoporosis to cancer. Relatively few selective inhibitors for this family exist, and the in vivo selectivity of most existing compounds is unclear. We present here the synthesis of focused libraries of epoxysuccinyl-based inhibitors and their screening in crude tissue extracts. We identified a number of potent inhibitors that display selectivity for endogenous cathepsin targets both in vitro and in vivo. Importantly, the selectivity patterns observed in crude extracts were generally retained in vivo, as assessed by active-site labeling of tissues from treated animals. Overall, this study identifies several important compound classes and highlights the use of activity-based probes to assess pharmacodynamic properties of small-molecule inhibitors in vivo.     

Atmospheric-pressure, liquid-phase, selective aerobic oxidation of alkanes catalysed by metal-organic frameworks

Aerobic oxidation of cyclooctane to its corresponding ol/one mixture at atmospheric pressure and in the liquid phase is efficiently promoted by an Fe(BTC) (BTC=1,3,5-benzenetricarboxylate) metal-organic framework, incorporating N-hydroxyphthalimide and in several cases reaches a selectivity over 90% at 28% conversion. This catalytic system is further extended to other hydrocarbons, such as ethylbenzene and 1,2,3,4-tetrahydronaphthalene (tetralin), with high selectivity (>85%). This high selectivity in the product distribution arises from a radical reaction mechanism that occurs inside a hydrophobic cavity that preferentially adsorbs hydrocarbons over their corresponding alcohols. The system can be reused although there is a gradual decrease in turnover frequency, caused by minor changes in the crystal structure due to the formation of iron oxide nanoparticles. Given the sustainable nature of the oxidant and the mild conditions used, this discovery could serve to develop a new catalyst generation for the oxyfunctionalisation of hydrocarbon feedstocks with the real possibility of finding industrial application.     

PPh3衍生准多孔有机笼在Rh/PPh3体系催化氢甲酰化反应中的应用:增强活性和选择性及可回收利用

多孔有机笼(POCs)由英国利物浦大学的Cooper教授在2009年首次合成,这种多孔小分子材料的出现具有两方面重要意义:(1)开拓了多孔材料领域的一个全新分支,改变了人们对多孔材料的传统认知;(2)由于POCs材料由离散的小分子堆积而成,可溶解于一些常用的有机溶剂中,因此其在材料制备方面具有很好的"溶液成型"性能,该优势是三维延伸网状多孔材料所不具备的.POCs本质上是一种"中心带孔"的有机小分子,由刚性有机分子砌块收敛堆叠而成,其特殊结构在气体吸附与分离等方面表现出很好的应用前景.不同于传统空间延伸网状框架材料(如金属-有机框架材料和共价有机框架材料)及多孔有机聚合物(POPs)材料,POCs是一种在大多数有机溶剂中可溶解的小分子材料,因此在均相催化领域也有很好的应用前景.作为最为经典的有机配体,三苯基膦(PPh3)在金属有机化学和均相催化领域应用十分广泛,如目前均相催化工业应用最成功的典范之一氢甲酰化反应,大多数情况下使用的是PPh3与Rh形成的络合物催化剂.本文首先将PPh3进行醛基官能团化,通过醛基和氨基的收敛缩合形成POCs材料,合成了基于PPh3配体的准多孔有机笼(POC-DICP),利用得到的多孔有机笼制备出类Rh/PPh3均相催化体系的Rh/POC-DICP络合催化体系,并将其应用于氢甲酰化反应.相比于经典的Rh/PPh3均相催化体系,该Rh/POC-DICP催化体系在氢甲酰化反应中不仅展示出了更高的活性和目标产物醛的选择性(醛的化学选择性为97％,醛的正异构比为1.89),而且可以很方便地从均相反应体系中沉淀回收(通过调整溶剂体系极性).在氢甲酰化反应中,Rh/POC-DICP体系显示出了良好的底物适用性,在己烯、庚烯、辛烯和苯乙烯的氢甲酰化反应中均表现出良好的催化活性和醛选择性,同时催化剂回收使用4次,未见催化性能明显下降.X射线单晶衍射、同步辐射及DFT计算等结果表明,Rh/POC-DICP催化体系在氢甲酰化反应中具有较高活性和选择性的原因是POC-DICP多孔有机笼分子的有利的空间咬合角(123.88o)和P原子上相对的缺电子效应.本文设计合成的PPh3衍生的多孔有机笼不仅拓宽了多孔有机笼材料在催化领域的应用,而且为新型配体及络合催化剂的设计、合成及修饰提供了新的思路.     

PPh3衍生准多孔有机笼在Rh/PPh3体系催化氢甲酰化反应中的应用:增强活性和选择性及可回收利用

多孔有机笼(POCs)由英国利物浦大学的Cooper教授在2009年首次合成,这种多孔小分子材料的出现具有两方面重要意义:(1)开拓了多孔材料领域的一个全新分支,改变了人们对多孔材料的传统认知;(2)由于POCs材料由离散的小分子堆积而成,可溶解于一些常用的有机溶剂中,因此其在材料制备方面具有很好的"溶液成型"性能,该优势是三维延伸网状多孔材料所不具备的.POCs本质上是一种"中心带孔"的有机小分子,由刚性有机分子砌块收敛堆叠而成,其特殊结构在气体吸附与分离等方面表现出很好的应用前景.不同于传统空间延伸网状框架材料(如金属-有机框架材料和共价有机框架材料)及多孔有机聚合物(POPs)材料,POCs是一种在大多数有机溶剂中可溶解的小分子材料,因此在均相催化领域也有很好的应用前景.作为最为经典的有机配体,三苯基膦(PPh3)在金属有机化学和均相催化领域应用十分广泛,如目前均相催化工业应用最成功的典范之一氢甲酰化反应,大多数情况下使用的是PPh3与Rh形成的络合物催化剂.本文首先将PPh3进行醛基官能团化,通过醛基和氨基的收敛缩合形成POCs材料,合成了基于PPh3配体的准多孔有机笼(POC-DICP),利用得到的多孔有机笼制备出类Rh/PPh3均相催化体系的Rh/POC-DICP络合催化体系,并将其应用于氢甲酰化反应.相比于经典的Rh/PPh3均相催化体系,该Rh/POC-DICP催化体系在氢甲酰化反应中不仅展示出了更高的活性和目标产物醛的选择性(醛的化学选择性为97％,醛的正异构比为1.89),而且可以很方便地从均相反应体系中沉淀回收(通过调整溶剂体系极性).在氢甲酰化反应中,Rh/POC-DICP体系显示出了良好的底物适用性,在己烯、庚烯、辛烯和苯乙烯的氢甲酰化反应中均表现出良好的催化活性和醛选择性,同时催化剂回收使用4次,未见催化性能明显下降.X射线单晶衍射、同步辐射及DFT计算等结果表明,Rh/POC-DICP催化体系在氢甲酰化反应中具有较高活性和选择性的原因是POC-DICP多孔有机笼分子的有利的空间咬合角(123.88o)和P原子上相对的缺电子效应.本文设计合成的PPh3衍生的多孔有机笼不仅拓宽了多孔有机笼材料在催化领域的应用,而且为新型配体及络合催化剂的设计、合成及修饰提供了新的思路.     

Effect of transition metals (Cr, Mn, Fe, Co, Ni and Cu) on selective hydrogenation of cinnamaldehyde over Pt/CNTs catalyst

Summary The effect of transition metals (Cr, Mn, Fe, Co, Ni and Cu) on the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding semi-hydrogenated product over Pt/CNTs catalyst has been studied in ethanol at 343 K under 2.0 MPa H₂ pressure. PtNi/CNTs catalyst shows good catalytic activity and selectivity of C=C bond hydrogenation, 68.4% for conversion of CMA and 97.0% for selectivity of hydrocinnamaldehyde (HCMA). PtCo/CNTs catalyst shows good catalytic activity and selectivity of C=O bond hydrogenation, 91.3% for conversion of CMA and 88.2% for selectivity of cinnamylalcohol (CMO).     

Spectral interferences in inductively coupled plasma atomic emission spectrometry-I: A theoretical and experimental study of the effect of spectral bandwidth on selectivity,limits of determination,limits of detection and detection power

This article links up with recent work on high resolution spectroscopy in this laboratory [1] and primarily deals with the effect of the spectral resolution on the “selectivity” in the case of samples that emit line-rich spectra. The concept of selectivity, as developed by KAISER [8] on the basis of the set of calibration equations for a multicomponent system, is considered as a useful starting-point but is rejected as a meaningful analytical figure of merit. Instead the concept of “line selectivity” is introduced as a criterion and related to the analytical error. This approach leads to a definition of the limit of determination such that its dependence on the spectral resolution can be clearly and unambiguously revealed in any concrete situation, that is, once the sample type has been specified. Such a specification is necessary since the numerical values of quantities related to selectivity are inherently linked with sample composition.Thus the theory is illustrated with practical examples including the results of a multiplicity of simulated line overlap situations using representative experimental line profiles measured at two extreme levels of resolution, referred to as “medium” and “high” resolution.It is shown that in the case of line overlap the limit of determination may exceed the limit of detection by one or even two orders of magnitude, unless line selection is based on a selectivity criterion so that the limit of detection is inherently coupled to the limit of determination. It is also shown that the prime benefit of high resolution spectroscopy is the reduction of the limit of determination, not that of the limit of detection. This benefit is found only if the spectral resolution can improve the selectivity, thus if there exist situations of line overlap.     

Adsorption of ethane, ethylene, propane, and propylene on a magnesium-based metal-organic framework

Separation of olefin/paraffin is an energy-intensive and difficult separation process in petrochemical industry. Energy-efficient adsorption process is considered as a promising alternative to the traditional cryogenic distillation for separating olefin/paraffin mixtures. In this work, we explored the feasibility of adsorptive separation of olefin/paraffin mixtures using a magnesium-based metal-organic framework, Mg-MOF-74. Adsorption equilibria and kinetics of ethane, ethylene, propane, and propylene on a Mg-MOF-74 adsorbent were determined at 278, 298, and 318 K and pressures up to 100 kPa. A dual-site Sips model was used to correlate the adsorption equilibrium data, and a micropore diffusion model was applied to extract the diffusivities from the adsorption kinetics data. A grand canonical Monte Carlo simulation was conducted to calculate the adsorption isotherms and to elucidate the adsorption mechanisms. The simulation results showed that all four adsorbate molecules are preferentially adsorbed on the open metal sites where each metal site binds one adsorbate molecule. Propylene and propane have a stronger affinity to the Mg-MOF-74 adsorbent than ethane and ethylene because of their significant dipole moments. Adsorption equilibrium selectivity, combined equilibrium and kinetic selectivity, and adsorbent selection parameter for pressure swing adsorption processes were estimated. The relatively high values of adsorption selectivity suggest that it is feasible to separate ethylene/ethane, propylene/propane, and propylene/ethylene pairs in a vacuum swing adsorption process using Mg-MOF-74 as an adsorbent.     

Ethanol steam reforming over Ni-Cu/Al2O3-MyOz （M = Si, La, Mg, and Zn） catalysts

Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction.The effects of Ca content,support species involving Al2O3-SiO2,Al2O3-MgO,Al2O3-ZnO,and Al2O3-La2O3,on the catalytic performance were studied.Characterizations by TPR,XRD,NH3-TPD,XPS,and TGA indicated that catalysts 30Ni5Cu/Al2O3-MgO and 30NiSCu/Al2O3-ZnO have much higher H2 selectivity than 30NiSCu/Al2O3-SiO2,as well as good coke resistance.H2 selectivity for 30Ni5Cu/Al2O3-MgO catalyst was 73.3% at 450℃ and increased to 94.0% at 600 ℃,whereas for 30NiSCu/Al2O3-ZnO catalyst,the H2 selectivity was 63.6% at 450 ℃ and 95.2% at 600 ℃.These Al2O3-MgO and Al2O3-ZnO supported Ni-Cu bimetallic catalysts may have important applications in the production of hydrogen by ethanol steam reforming reactions.     

The ion adsorption effect on selectivity of liquid state, O,O'-didecylodithiophosphate chelate based ion-selective electrodes

Ion-selective electrodes with liquid membranes including O,O′-didecylo-dithiophosphate complexes of Tl(I), Pb(II), Cd(II) and Ni(II) are characterised and results of the study on their selectivity are reported. A short review of problems related to determination and interpretation of selectivity coefficients of ion-selective electrodes is presented with particular emphasis on the drawbacks of the hitherto used methods. A new method is proposed, which in the experimental part is close to that of mixed solutions recommended by IUPAC but can be applied also when the latter is of no use. The method proposed for determination of selectivity coefficients simultaneously allows concluding about the mechanism of potential generation. A few examples of relations between selectivity coefficients of the electrodes and concentrations of disturbing ions in solutions, are given. An interpretation of the above relations as results of the processes of ion adsorption at the interface of the electrode membrane and water solution is proposed. The results obtained have confirmed the hypothesis given by Pungor, according to which the main role in the mechanism of generation of ion-selective electrodes potential is played by the processes of ion chemisorption at the interface of the membrane and water solution.     

Unexpected formation of N,N-disubstituted formamidines from aromatic amines, formamides and trifluoroacetic anhydride

An intriguing selectivity towards the formation of the formamidine was observed upon the reaction of an amine with sodium hydride and trifluoroacetic anhydride in dimethyl formamide. Various aromatic amines were reacted with a series of N,N-disubstituted formamides as a solvent under the influence of trifluoroacetic anhydride to thoroughly probe this behaviour. A trend in selectivity is discussed and a proposed mechanism for the reaction is also presented.     

Evaluation of column temperature as a means to alter selectivity in the cation exchange separation of alkali metals, alkaline earth metals and amines

The merits of varying column temperature in a cation exchange separation of alkali metals, alkaline earth metals and amines are considered. Increasing the column temperature (up to 60 degrees C) reduced the retention of all cations, but by varying extents. Consequently, selectivity changes were seen, with reversals in elution order in some cases. To ascertain when temperature is most useful as a separation aid, analytes were classed into three groups according to their temperature behaviour: alkali metals; alkaline earth metals; and amines. Adjusting the column temperature caused selectivity changes between analytes in different groups, but no selectivity changes occurred between analytes in the same group. Further, temperature was compared to the addition of modest amounts of acetonitrile as another means to alter selectivity. The benefits of elevated temperature were not just limited to selectivity changes. Improvements in the efficiencies of all analytes were noted at 60 degrees C. This was especially true for the amines which are severely tailed at ambient temperatures.     

Preparation,characterisation and gas transport properties of trifluoroacetylated ethyl cellulose

A mixed ester of ethyl cellulose (EC) has been prepared by reaction of trifluoroacetic anhydride with the residual hydroxy groups of ethyl cellulose. The mixed ester is soluble in tetrahydrofuran, dichloromethane, chloroform, benzene and pyridine. FTIR and NMR spectra show that hydroxy groups of ethyl cellulose were replaced by trifluoroacetoxy groups. The trifluoroacetyl ethyl cellulose (TFAEC) has higher selectivity for oxygen relative to nitrogen, in gas transport, than unmodified EC. Annealing at an elevated temperature further improves selectivity for oxygen, whilst subsequent ageing at ambient temperature partially reduces oxygen selectivity. The tensile strength of TFAEC is virtually the same as that of unmodified EC, but the elongation to break is 200% higher than for EC.     

Steam reforming of methanol over Ni, Co, Pd and Pt supported on ZnO

Pd/ZnO and Pt/ZnO exhibited anomalously high selectivity for the steam reforming of methanol, when PdZn and PtZn alloys phases were developed. The selectivity decreased over the catalysts having metal phases.     

Design,synthesis, and in vitro anticancer screening of novel pyrazolinyl-pyrazole/1, 2, 3-triazole hybrids

Novel hybrids, pyrazolinylpyrazoles, and pyrazolinyltriazoles were designed, synthesized, and screened for their anticancer activity. Eleven compounds were selected by the National Cancer Institute (NCI)/USA for anticancer screening at single high dose (10⁻⁵ M) in full NCI 60 cell panels. Two compounds: 4-aminopyrazole-5-carbonitrile, 5c (NSC-747630/1) and ethyl 4-aminopyrazole-5- carboxylate, 7d (NSC-747634/1) were the most active candidates of the series and were selected for further evaluation at five dose screening as they displayed significant growth inhibition with full panel median growth inhibition (GI₅₀) 5.47 and 2.24 μM, respectively. Both 5c and 7d hybrids exhibited broad spectrum antitumor activity; however 7d showed moderate selectivity (selectivity ratio 3.6) toward leukemia.     

Chiral microemulsion electrokinetic chromatography: Effect of cosurfactant identity on enantioselectivity, methylene selectivity, resolution, and other chromatographic figures of merit

The effect of cosurfactant identity on microemulsion size, elution range, retention factor, enantioselectivity, methylene selectivity, efficiency, and resolution in chiral microemulsion formulations was examined. The chiral surfactant dodecoxycarbonylvaline was used in conjunction with the cosurfactants 1-butanol, 1-pentanol, 2-pentanol, 1-hexanol, 2-hexanol, cyclopentanol, and cyclohexanol. The millimolar concentration of cosurfactant was held constant regardless of identity. Ethyl acetate was incorporated as the microemulsion oil core and the buffer utilized was 50 mM phosphate at a pH of 7.0. In general, secondary alcohols improved enantioselectivities and primary alcohols had the opposite effect, with the exception of the 1-butanol. The trends observed varied slightly depending on analyte. Of the six chiral analytes tested, cyclopentanol provided the best enantioselectivity for three, 1-butanol for two compounds, and 2-pentanol for one analyte. The lowest enantioselectivities were achieved with 1-pentanol or 1-hexanol for all compounds. Methylene selectivity was found to decrease with reductions in alcohol chain length. Among equal carbon number alcohols, methylene selectivity was lower for secondary alcohols. Efficiency and resolution values varied with different cosurfactants and depended on analyte identity.     

Synthesis and evaluation of potent, highly-selective, 3-aryl-piperazinone inhibitors of protein geranylgeranyltransferase-I

A series of compounds based on the carboxyl-terminal CAAL sequence of PGGTase-I substrates was designed and synthesized. Using piperazin-2-one as a semi-rigid scaffold, we have introduced critical pharmacophores in a well-defined arrangement to mimic the CAAL sequence. High potency and exceptional selectivity were obtained for inhibition of PGGTase-I with structures such as 45 and 70. Potency of this series of GGTIs was dependent on the presence of an L-leucine residue with a free carboxyl terminus, as well as an S configuration of the 3-aryl group. The selectivity was significantly enhanced by 5-methyl substitution on the imidazole ring and fluorine substitution on the 3-aryl group. Modification of the 6-position of the piperazinone scaffold was found to be unfavorable. Compounds 44 and 69, the corresponding methyl esters of 45 and 70, were found to selectively block processing of Rap1A by PGGTase-I in whole cells with IC(50) values of 0.4 microM and 0.7 microM respectively.