Determination of individual rare earth elements in Vietnamese monazite by radiochemical neutron activation analysis

Radiochemical neutron activation analysis (RNAA) has been applied for determination of rare earth elements (REE) in Vietnamese monazite. The chemical separation procedure used is based on the chromatographic elution of rare earth groups, after the separation of²³³Pa(Th) in irradiated monazite samples by coprecipitation with MnO₂, the rare earth elements were retained by Biorad AG1×8 resin column in 10% 15.4M HNO₃-90% methanol solution. The elution of heavy rare earth (HREE) and middle rare earth (MREE) groups was carried out with 10% 1M HNO₃-90% methanol and 10% 0.05M HNO₃-90% methanol solution, respectively; while the light rare earths (LREE) were eluted from the column by 0.1M HNO₃ solution. The accuracy of the method was checked by the analysis of granodiorite GSP-I and the rare earth values were in good agreement.     

Extraction of rare earth elements with 1-(diphenylphosphorylmethoxy)-2-diphenylphosphoryl-4-ethylbenzene with the use of 1,1,7-trihydrododecafluoroheptanol as a solvent

Extraction of rare earth elements from nitric acid solutions in a 1,1,7-trihydrododecafluoroheptanol-water system with the use of phosphoryl-containing podand 1-(diphenylphosphorylmethoxy)-2-diphenylphosphoryl-4-ethylbenzene (L) was studied. The content of metals in organic phase was shown to be negligible at nitric acid concentration lower 1 mol/L. Distribution ratio sharply increases with nitric acid concentration from 1 mol/L and reaches 5.5 for the yttrium subgroup elements at HNO₃ concentration of 6 mol/L. The rare earth elements of the yttrium subgroup were found to be extracted much better than the rare earth elements of the cerium subgroup under the same conditions, the distribution ratios in both subgroups smoothly rise with atomic number of element. It was shown using the shift of extraction equilibrium that the M: L ratio in extracted complexes is 1: 2 irrespective of the nature of rare earth element. The structure of complex {Yb[η²-(O,O′)-L]₂(η²-O₂NO)₂}(O₂NOHNO₃), whose single crystals were isolated from extraction solution, was established by X-ray diffraction study. The system can be used for the isolation and separation of rare earth elements.     

La、Ce、Yb掺杂对LiNi0.5Mn1.5O4高电压正极材料性能的影响

采用低温燃烧法制备出不同稀土元素掺杂的高电压镍锰酸锂(LiNi_(0.5)Mn_(1.5)O_4)正极材料,探究了不同掺杂比例(物质的量分数0.5%、1%、2%)和不同掺杂稀土元素(La、Ce、Yb)对样品性能的影响,并通过X射线衍射、拉曼光谱、电子顺磁共振和恒电流间歇滴定等技术探究了其影响机理。从X射线衍射图可以看出,稀土掺杂可以抑制Li_xNi_(1-x)O杂质相的产生;电感耦合等离子谱结果表明,掺杂进入的稀土元素与设计比例基本相符;从拉曼光谱图可以看出,稀土元素可以使样品的有序相增多,其中Ce掺杂样品的有序相最多;结合电子顺磁共振波谱氧空位测试,发现Ce掺杂诱导了样品中有序相比例增加,从而使样品的稳定性提高;经恒电流间歇滴定技术测试发现,Ce掺杂镍锰酸锂样品的扩散系数比未掺杂样品高了约15倍;在不同掺杂比例上,1%掺杂量时样品性能最佳。在3种最佳掺杂量的稀土元素样品中,Ce掺杂的样品性能最优,首次放电比容量可以达到133.3mAh·g~(-1),比未掺杂样品放电比容量高且首次效率提高了 18%,在1C下循环200次后,容量保持率为102%,比未掺杂样品提高了 8%。     

Reaction between rare earth elements and HFNO2 solution

Rare earth elements react with HFNO₂ solution to produce nitrosylium fluorometallates (NO)_xLnF_x+3. The value of x is 1.0 or 1.5 for light rare earth elements and 0.5 or 1.0 for heavy rare earths. Nitrosylium fluorometallates of rare earth elements can be decomposed into the simple fluoride and nitrosyl fluoride at low temperatures (46–68°C).     

Preorganized, cone-conformational calix[4]arene possessing four propylenephosphonic acids with high extraction ability and separation efficiency for trivalent rare earth elements

p-t-Octylcalix[4]arene with tetraphosphonic acid at lower rim in cone conformation has been designed and synthesized as a new extraction reagent to investigate the extraction behavior of the nine trivalent rare earth elements: La, Pr, Nd, Sm, Eu, Gd, Ho, Y, and Er. The extraction of rare earth metals with the present extractant occurs by a simple ion-exchange mechanism. The stoichiometry of the extractant to rare earth metal ion was determined to be 2:1 based on the extraction equation, half pH values, pH_1/2, and the difference in the values of the extraction equilibrium constants of nine trivalent rare earth elements and separation factors between adjacent rare earth elements. This allowed for comparison of the estimated extraction efficiency and selectivity. The present extractant exhibited extremely high extractability and sufficiently high separation efficiency of rare earth metals, compared with calix[4]arene tetraphosphonic acid at upper rim, calix[4]arene tetraacetic acid at lower rim as previously reported and the commercial extraction reagent. This results was attributed to size and multidentate effects based on the preorganized cyclic structure of calix[4]arene and to the original selectivity of functional group for heavier rare earth elements.     

Recovery of rare earth elements from wet process extraction phosphoric acid

It is shown that an increase in the recovery of rare earth elements in fluorophosphate concentrates, which are obtained by treating the wet process phosphoric acid by ammonium fluoride, is achieved by prior partial neutralization of H₃PO₄ by ammonia. Therewith the consumption of ammonium fluoride is reduced that provides almost complete precipitation of rare earth elements.     

Reversed-phase thin-layer chromatography of the rare earth elements

Summary Partition chromatographic behaviour of the rare earth elements on C₁₈ bonded silica reversed-phase material has been investigated by thin-layer chromatography in methanol — lactate media. The rare earth lactato complexes are distributed and fractionated on bonded silica layers without ion-interaction reagents. The concentration and pH of lactate solution, methanol concentration and temperature have effects on the migration and resolution of the rare earth elements. The partition system is particularly suited to separate adjacent rare earths of middle atomic weight groups, allowing the separation of gadolinium, terbium, dysprosium, holmium, erbium and thulium to be achieved by development to 18 cm distance.     

Electro‐kinetic Separation of Rare Earth Elements Using a Redox‐Active Ligand

Purification of rare earth elements is challenging due to their chemical similarities. All of the deployed separation methods rely on thermodynamic properties, such as distribution equilibria in solvent extraction. Rare‐earth‐metal separations based on kinetic differences have not been examined. Herein, we demonstrate a new approach for rare‐earth‐element separations by exploiting differences in the oxidation rates within a series of rare earth compounds containing the redox‐active ligand [{2‐(t BuN(O))C₆H₄CH₂}₃N]³⁻. Using this method, a single‐step separation factor up to 261 was obtained for the separation of a 50:50 yttrium–lutetium mixture.     

Extraction of rare earth elements by high molecular weight amines from nitric acid solutions

Extraction of trivalent rare earth elements by a high molecular weight primary amine /decylamine/ from 0.5–3M nitric acid solutions, containing potassium phosphotungstate /K₁₀P₂W₁₇O₆₁/, has been investigated. The effect of nitric acid and potassium phosphotungstate concentration of the organic solvent, and lanthanides ionic radii upon distribution coefficients has been studied. It has been established that decylamine solutions in chloroform can be used for the group isolation of rare earth elements and for their separation.     

Rare earth impurities in high purity lanthanum oxide determined by neutron activation analysis

Individual rare earth impurities in high purity La₂O₃ (99.9%) have been determined by NAA after pre-separation of the matrix (La). The separation is carried out on an anion exchanger (Dowex 1×8) using different mixtures of methanol/nitric acid as eluants. The rare earth elements from Dy to Lu are eluted quantitatively using a 10% 1M HNO₃-90% methanol mixture, while the light rare earths from Ce to Gd are eluted quantitatively using a 10% 0.05M HNO₃-90% methanol mixture. La, which is retained on the column, is eluted using 0.1M HNO₃. The recoveries of the various rare earth elements have been checked using radiotracers and also by spiking the sample with known amount of elements, and the recoveries are found to be quantitative. Results obtained on a typical high purity lanthanum oxide are reported here.     

Bulky Amido Ligands in Rare Earth Chemistry — Syntheses,Structures, and Catalysis

The amido metal chemistry of the rare earth elements is a rapid developing area in coordination chemistry. Especially bulky mono and bidentate amido and amidinates have been introduced as ligands in rare earth chemistry. Due to these sterically demanding ligands, the coordination numbers of the rare earth elements are significantly reduced. This article focuses on two of these bulky ligand systems: bis(trimethylsilyl)amide and aminotroponiminates. The homoleptic bis(trimethylsilyl)amides of rare earth elements, [Ln{N(SiMe₃)₂}₃], are well established compounds in synthetic chemistry. Therefore, this article reviews recent progress in the catalytic application of these compounds. In the second part of this research report, it is shown that N, N′‐disubstituted aminotroponiminates and mono bridged bisaminotroponiminates can be used as cyclopentadienyl alternatives. Achiral and chiral aminotroponiminates have been used. The structural properties, reactivities as well as the catalytic and synthetic applications of the aminotroponiminates complexes will be outlined in this article.     

Investigation of double sulfates of potassium and rare earth elements with composition KRE(SO4)2

We have established the formation of anhydrous double sulfates of KRE(SO₄)₂ for the entire series of rare earth elements, which crystallize in five different structural types. The parameters of the unit cells of the double sulfates KRE(SO₄)₂ (RE = LaTb) have been determined. The thermal stability and character of decomposition of the double sulfates of potassium and rare earth elements have been investigated.     

ICP-AES和ICP-MS法测定光学玻璃中的15种稀土元素

采用Na₂O₂熔融分解样品,运用电感耦合等离子体发射光谱法（ICP-AES）和电感耦合等离子体质谱法（ICP-MS）测定光学玻璃中的稀土元素。采用该方法对国家一级标准物质GBW07158、GBW07159、GBW07160和GBW07161进行测定,其结果表明与标准值相符。方法选择性好、灵敏度好、定量准确,适用于光学玻璃中稀土元素的测定,结果令人满意。     

First Homoleptic Rare Earth Carbazolates: Synthesis,Crystal Structures,Spectroscopic and Thermal Investigations of Divalent 1[Ln(NC12H8)2] with Ln = Europium and Ytterbium

The compounds [Ln(NC₁₂H₈)₂], Ln = Eu and Yb, were obtained in solvent free reactions of the rare earth elements europium and ytterbium with the amine carbazole. Single crystals of both compounds were grown from the melt syntheses, no recrystallization from solvents was necessary. The new compounds are the first examples of homoleptic carbazolates of the rare earth elements furthermore exhibiting divalent lanthanides. In absence of any solvent, carbazole as the sole coordination partner shows η⁶‐π‐coordination in addition to the μ₁‐ and μ₂‐coordination of the nitrogen atoms. This results in a one‐dimensional chain structure of dimers with a formal C.N. of 6 for the rare earth elements and thus being low for divalent lanthanides. The products were investigated by X‐ray single crystal and powder diffraction, Mid IR, Far IR and Raman spectroscopy, and with DTA/TG regarding their thermal behaviour. Both compounds [Ln(NC₁₂H₈)₂], Ln = Eu (1) and Yb (2) , crystallize isotypic in the triclinic space group P1.     

一体化碰撞反应 (iCRC)-电感耦合等离子体质谱法测定地质样品中痕量稀土元素

钡以及轻稀土元素氧化物对中、重稀土元素的干扰一直是质谱测试中存在的问题。建立了石墨粉垫底碳酸钠-硼酸混合熔剂熔融前处理样品,以_¹⁰³Rh为内标校正,一体化碰撞反应-电感耦合等离子体质谱仪法测定地质样品中稀土元素含量的方法。探讨了碳酸钠-硼酸混合熔剂熔融前处理样品注意事项、碰撞模式下碰撞气流量和离子透镜的参数的优化、干扰校正试验等问题,采用国家标准物质GBW07403、GBW07405、GBW07427、GBW07429验证,实验结果表明,各元素线性关系良好,相关系数均大于0.999,方法检出限在0.01～0.03mg/kg之间,相对误差为0.13%～7.1%,相对标准偏差为0.79%～6.59%,测试结果与标准值相吻合。对实际样品分析,得到平滑的球粒陨石归一化的稀土元素配分曲线,证明测定结果是合理可信的。该方法熔剂用量少,过程空白低,对器皿的侵蚀小,直接加热浸取,简化了操作过程,适用于大批量地质样品中稀土元素的测定。     

An effective process for the separation of U(VI), Th(IV) from rare earth elements by using ionic liquid Cyphos IL 104

Separation and recovery of U(VI) and Th(IV) from rare earth minerals is a very challenging work in rare earth industrial production. In the present study, a homemade membrane emulsification circulation (MEC) extractor was used to separate U(VI) and Th(IV) from rare earth elements by using Cyphos IL 104 as an extractant. Batch experiments were carried out using a constant temperature oscillator to investigate the extraction parameters of the single element and the results indicated that Cyphos IL 104 could reach the extraction equilibrium within 30 min for all the three elements, i.e., U(VI), Th(IV), and Eu(III). Besides, the MEC extractor possessed a strong phase separation ability. The extraction efficiencies of U(VI), Th(IV), La(III), Eu(III) and Yb (III) increased with the increase of pH. La(III), Eu(III) and Yb(III) were hardly extracted when pH ≤ 1.50, which was beneficial for effectively separating U(VI) and Th(IV) from La(III), Eu(III) and Yb(III). In the multi-stages stripping experiments, when the stripping stage number was 3, the effective separation could be achieved by using HCl and H₂SO₄, since the stripping efficiency reached 80.0% and 100.0% for Th(IV) and U(VI), respectively. Slope method and FT-IR spectra showed that Cyphos IL 104 reacted with U(VI) and Th(IV) by chelation mechanism. The extraction of multi-elements indicated that U(VI) and Th(IV) could be well separated from the solution which contains all rare earth elements, and the extraction efficiencies of U(VI) and Th(IV) both were close to 100.0%. Based on the above experimental results, a flowchart for efficient separation of U(VI) and Th(IV) from rare earth elements was proposed.     

Deposition of rare earth elements from a wet-process phosphoric acid by fluorine compounds

Effect of type and consumption of fluorine reagents (HF, NH₄F·HF, NH₄F and NaF) on the deposition of rare earth elements from the wet-process phosphoric acid of the dihydrate process was examined.     

Distribution of trace elements in the marine sediments along the South China Sea,Malaysia

In order to complete having data base of elemental assessment of the east coast of Peninsular Malaysia marine sediments along the South China Sea coasts, trace elements are analyzed and their distribution in marine sediments is undertaken. The present study is done parallel with pervious study on elemental assessment of heavy metals, rare earth elements and actinides in the marine sediments of the east coast of Peninsular Malaysia. Thirty surface sediment samples were collected in this area, including regions of Kelantan, Terengganu, Pahang, Rompin and Johor Baharu. Multielemental analysis was carried out by instrumental neutron activation analysis and inductively coupled plasma atomic emission spectroscopy. In both cases methodology validation was performed by certified reference material analyses. For the surface elemental distributions the enrichment factor values, average I _geo and mC _d values indicate that the trace elements of the surface sediments are uncontaminated in all sampling stations that are consistent with previous studies results of heavy metals, rare earth elements and actinides.     

Direct determination of trace rare earth elements in high purity Y2O3 using fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry with slurry sampling

A new method for the determination of trace amounts of 14 rare earth elements in high purity Y₂O₃ using fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry with slurry sampling was developed. A polytetrafluoroethylene (PTFE) emulsion was used as a fluorinating reagent to promote the vaporization of the analytes from graphite furnace. The main factors affecting analytical signals were investigated systematically. The interference of matrix could be minimized in the presence of PTFE. Under optimum conditions, the detection limits for rare earth elements were 0.032 ng∼2.52 ng and the relative standard deviations were in the range of 1.4% to 4.3%. The proposed method was applied to the direct analysis of high purity Y₂O₃ powder with satisfactory results. Received: 19 June 1999 / Revised: 10 December 1999 / Accepted: 16 December 1999     

电感耦合等离子体质谱法测定三水铝土矿中的15种有效稀土元素

建立电感耦合等离子体质谱法测定三水铝土矿中15种有效稀土元素的分析方法。参考三水铝土矿中有效铝的概念,提出了有效稀土元素的概念,并对三水铝土矿中稀土元素的回收利用的可行性进行了评价。模拟低温拜耳法生产氧化铝的工艺,对三水铝土矿中稀土元素溶出过程中的氢氧化钠浓度、溶出温度及时间等条件进行了试验,采用90 g/L氢氧化钠结合微波消解技术对三水铝土矿进行分解,用ICP-MS法测定有效稀土元素,有效稀土元素测定结果的相对标准偏差为0.92%~7.40%(n=7),回收率为98.6%~101.2%。该方法可用于测定三水铝土矿中有效稀土元素,能够对三水铝土矿中稀土元素的回收利用价值进行评价。