Selective determination of thorium in water using dual-wavelength β-correction spectrophotometry and the reagent 4-(2-pyridylazo)-resorcinol

A simple, fast, low cost, and precise direct β-correction spectrophotometric method was developed for thorium determination in water. The method is based on the reaction of Th(IV) with 4-(2-pyridylazo)-resorcinol (PAR) in aqueous solution of pH 5–6 and measuring the absorbance of the resulting red-colored complex at λ_max 497 nm. The effective molar absorptivity of the Th(IV)-PAR complex was 2.52 × 10⁴ L mol⁻¹ cm⁻¹. Beer’s law and Ringbom plots were obeyed in the concentration range 0.04–2.0 and 0.07–1.2 μg mL⁻¹ of thorium ions using β-correction spectrophotometry, respectively. The limits of detection and quantification of Th(IV) were 0.02 and 0.066 μg mL⁻¹, respectively. The developed method was applied for the analysis of thorium in certified reference material (IAEA-soil-7), tap-, underground- and Red-sea water samples. The validation of the method was also tested by comparison with data obtained by ICP-MS. The method is convenient, less sensitive to common interfering species and less laborious than most of published methods. The statistical treatment of data in terms of Student t-tests and variance ratio f-tests has revealed no significance differences. The structure of the Th(IV)-PAR complex was determined with the aid of spectroscopic measurements (UV–Visible and Fourier Transform Infrared Spectroscopy).     

Magnetic properties of spacer-armed dinuclear copper(II) complexes

The results of static magnetic susceptibility studies of spacer-armed dinuclear copper(II) complexes with dicarboxylic acid acylhydrazones are described. Weak exchange coupling between paramagnetic centers has been detected with an exchange parameter value of −2J ∼ 1–7 cm⁻¹. Short intermolecular contacts give rise to additional weak antiferromagnetic exchange coupling between copper cations comparable in terms of energy with superexchange inside the dinuclear complex (−zJ′ ∼ 0.6–5.0 cm⁻¹).     

Adsorptive Voltammetric Studies on the Cerium(III)–Alizarin Complexon Complex at a Carbon Paste Electrode

A novel procedure was developed for the determination of trace cerium on the basis of anodic adsorption voltammetry of the Ce(III)–alizarin complexon (ALC) complex at a carbon paste electrode (CPE). The procedure is convenient to determine cerium individually in the presence of other rare earths because there is a 100 mV difference between the peak potentials of Ce(III)–ALC and other rare earth(III)–ALC complexes in a supporting electrolyte of 0.08 M HAc–NaAc and 0.012 M potassium biphthalate (pH 4.7) when performing linear-scanning from −0.2 to 0.8 V (vs. SCE) at 100 mV/s. The second-order derivative peak currents are directly proportional to the Ce(III) concentration over a range of 6.0 × 10⁻⁹–3.0 × 10⁻⁷ M. The detection limit is as low as 2.0 × 10⁻⁹ M (S/N = 3) for a 120 s preconcentration. An RSD of 3.5% was obtained for 15 determinations of Ce(III) at a concentration of 4.0 × 10⁻⁸ M on the same CPE surface. The method was applied successfully to the determination of cerium in samples of rare earth nodular graphite cast iron.     

Determination of total Sb,Se, Te,and Bi and evaluation of their inorganic species in garlic by hydride-generation–atomic-fluorescence spectrometry

A sensitive and simple analytical method has been developed for determination of Sb(III), Sb(V), Se(IV), Se(VI), Te(IV), Te(VI), and Bi(III) in garlic samples by using hydride-generation–atomic-fluorescence spectrometry (HG–AFS). The method is based on a single extraction of the inorganic species by sonication at room temperature with 1 mol L⁻¹ H₂SO₄ and washing of the solid phase with 0.1% (w/v) EDTA, followed by measurement of the corresponding hydrides generated under two different experimental conditions directly and after a pre-reduction step. The limit of detection of the method was 0.7 ng g⁻¹ for Sb(III), 1.0 ng g⁻¹ for Sb(V), 1.3 ng g⁻¹ for Se(IV), 1.0 ng g⁻¹ for Se(VI), 1.1 ng g⁻¹ for Te(IV), 0.5 ng g⁻¹ for Te(VI), and 0.9 ng g⁻¹ for Bi(III), in all cases expressed in terms of sample dry weight.     

Synthesis of O,O Ethane Bridged Bis-copper(II) Macrocycles. Selective Enzyme Model for Catecholase Activity

New mononuclear and dinuclear complexes [3-hydroxyethyl-1,3,5,8,11pentaazacyclotridecane]copper(II) (1)/nickel(II) (2) perchlorate and O,O ethane bridged bis-copper(II) (3)/nickel(II) (4) macrocycles have been synthesized and characterized by various spectroscopic techniques, viz. i.r., n.m.r., e.p.r., u.v.–vis. and conductance measurements. Spectral data and conductance measurements reveal that all the complexes are consistent with square-planar geometry and are ionic in nature. The catalytic activity of the dinuclear Cu(II) complex (3) in the presence of pyrocatechol was determined spectrometrically by monitoring the increase of the o-benzoquinone characteristic absorption band at 25,000 cm⁻¹ with respect to time in DMF saturated with molecular oxygen. The kinetic parameters V_max (2.8×10⁻³ M s⁻¹) and K_M (1.4×10⁻³ mm) have been determined by Michaelis–Menten method. Electrochemistry of the dinuclear Cu(II) complex has been studied in the presence of molecular oxygen with pyrocatechol and without pyrocatechol at a scan rate of 0.1 V s⁻¹ by cyclic voltammetry. On addition of pyrocatechol, complex shows a shift in E_pc, E_pa and E_1/2 values indicating the oxidation of substrate (pyrocatechol).     

Determination of naturally occurring uranium concentrations in seawater,sediment, and marine organisms in Japanese estuarine areas

For safety assessments of geological repositories of nuclear waste, understanding of uranium (U) fate in estuarine areas is important because U chemical behavior in the areas is expected to be complex. Environmental transfer parameters such as sediment–water distribution coefficients (K _d) and concentration ratios (CRs) for marine organisms are useful in mathematical models for the assessment. However, due to its low concentration in estuarine water, K _d and CF data for U are scarce. Thus we studied a rapid method for separation and concentration of U from estuarine water samples using NOBIAS-CHELATE PA1 resin columns followed by inductively coupled plasma mass spectrometry (ICP-MS) for U measurement. Chemical recovery was about 100% at pH of 5.7 ± 0.1 from the water samples and alkali and alkaline earth metals were removed. The method was used to measure U concentrations in estuarine water samples collected at eight Japanese estuarine areas; they ranged from 0.1 to 3.8 μg L⁻¹. We also measured U concentrations in sediment and marine organism samples by ICP-MS after acid digestion. Using these values, we observed K _d (range: 39–284 L kg⁻¹) and CRs (0.86–52 L kg⁻¹ for macroalgae, 0.087–15 L kg⁻¹ for crustaceans, and 0.52–93 L kg⁻¹ for molluscs).     

Angiotensin I-Converting Enzyme Inhibitory Proteins and Peptides from the Rhizomes of Zingiberaceae Plants

Ammonium sulphate cut protein extracts, and their pepsin hydrolysates, from the rhizomes of 15 plants in the Zingiberaceae family were screened for their in vitro angiotensin I-converting enzyme inhibitory (ACEI) activity. The protein extract from Zingiber ottensii had the highest ACEI activity (IC₅₀ of 7.30 × 10⁻⁷ mg protein/mL) and was enriched for by SP Sepharose chromatography with five NaCl step gradients 0, 0.25, 0.50, 0.75 and 1 M NaCl collecting the corresponding five fractions. The highest ACEI activity was found in the F75 fraction, which appeared to contain a single 20.7-kDa protein, suggesting enrichment to or near to homogeneity. The ACEI activity of the F75 fraction was moderately thermostable (−20–60 °C), showed >80% activity across a broad pH range of 4–12 (optimal at pH 4–5) and appeared as a competitive inhibitor of ACE (K _i of 9.1 × 10⁻⁵ mg protein/mL). For the pepsin hydrolysates, that from Zingiber cassumunar revealed the highest ACEI activity (IC₅₀ of 0.38 ± 0.012 mg/mL), was enriched to a single active hexapeptide by RP-HPLC with a strong ACEI activity (IC₅₀ of 0.011 ± 0.012 mg/mL) and acted as a competitive inhibitor of ACE (K _i of 1.25 × 10⁻⁶ mg protein/mL).     

Cerium(III/IV) and Cerium(IV)–Titanium(IV) Citric Complexes Prepared in Ethylene Glycol Medium

Cerium(III/IV) and Ce(IV)–Ti(IV) citric complexes were synthesized in ethylene glycol medium under conditions similar to those of the polymerized complex method (PCM). Solution phase ¹H, ¹³C NMR, solid state ¹³C CP MAS NMR and IR spectroscopy, and X-ray powder diffractometry were used to characterize the composition and structure of the synthesized products. Thermal decomposition of the isolated complexes was studied and a scheme of the processes taking place is proposed. Complexes of Ce(III) can be prepared at low temperature (40°C), only. In the presence of Ti(IV) ions, the oxidation takes place even at this temperature. A mixed-metal nature of the Ce(IV)–Ti(IV) complexes is established. The comparison between their composition and the one of analogous lanthanide(III)–Ti(IV) citrates contributes to the elucidation of the complexation process mechanism in the case of the PCM application. The increased charge of the complexation agent in the Ce⁴⁺–Ti⁴⁺ complex (in comparison with Ln ³⁺–Ti⁴⁺ citrates) is “compensated” by the increase of the relative number of the ligands with deprotonated OH group.     

Cerium(III/IV) and Cerium(IV)–Titanium(IV) Citric Complexes Prepared in Ethylene Glycol Medium

Summary. Cerium(III/IV) and Ce(IV)–Ti(IV) citric complexes were synthesized in ethylene glycol medium under conditions similar to those of the polymerized complex method (PCM). Solution phase ¹H, ¹³C NMR, solid state ¹³C CP MAS NMR and IR spectroscopy, and X-ray powder diffractometry were used to characterize the composition and structure of the synthesized products. Thermal decomposition of the isolated complexes was studied and a scheme of the processes taking place is proposed. Complexes of Ce(III) can be prepared at low temperature (40°C), only. In the presence of Ti(IV) ions, the oxidation takes place even at this temperature. A mixed-metal nature of the Ce(IV)–Ti(IV) complexes is established. The comparison between their composition and the one of analogous lanthanide(III)–Ti(IV) citrates contributes to the elucidation of the complexation process mechanism in the case of the PCM application. The increased charge of the complexation agent in the Ce⁴⁺–Ti⁴⁺ complex (in comparison with Ln ³⁺–Ti⁴⁺ citrates) is “compensated” by the increase of the relative number of the ligands with deprotonated OH group.     

Structure and electronic properties of hydrated mesityl oxide: a sequential quantum mechanics/molecular mechanics approach

The hydration of mesityl oxide (MOx) was investigated through a sequential quantum mechanics/molecular mechanics approach. Emphasis was placed on the analysis of the role played by water in the MOx syn–anti equilibrium and the electronic absorption spectrum. Results for the structure of the MOx–water solution, free energy of solvation and polarization effects are also reported. Our main conclusion was that in gas-phase and in low-polarity solvents, the MOx exists dominantly in syn-form and in aqueous solution in anti-form. This conclusion was supported by Gibbs free energy calculations in gas phase and in-water by quantum mechanical calculations with polarizable continuum model and thermodynamic perturbation theory in Monte Carlo simulations using a polarized MOx model. The consideration of the in-water polarization of the MOx is very important to correctly describe the solute–solvent electrostatic interaction. Our best estimate for the shift of the π–π^* transition energy of MOx, when it changes from gas-phase to water solvent, shows a red-shift of −2,520 ± 90 cm⁻¹, which is only 110 cm⁻¹ (0.014 eV) below the experimental extrapolation of −2,410 ± 90 cm⁻¹. This red-shift of around −2,500 cm⁻¹ can be divided in two distinct and opposite contributions. One contribution is related to the syn → anti conformational change leading to a blue-shift of ~1,700 cm⁻¹. Other contribution is the solvent effect on the electronic structure of the MOx leading to a red-shift of around −4,200 cm⁻¹. Additionally, this red-shift caused by the solvent effect on the electronic structure can by composed by approximately 60 % due to the electrostatic bulk effect, 10 % due to the explicit inclusion of the hydrogen-bonded water molecules and 30 % due to the explicit inclusion of the nearest water molecules.     

Determination of partial immersion enthalpy in the interaction of water and activated carbon

A way to calculate the enthalpic contributions of each component of the mixture of activated carbon and water to the immersion enthalpy using the concepts of the solution enthalpies is presented. By determining the immersion enthalpies of a microporous activated carbon in water, with values that are between –18.97 and −27.21 Jg⁻¹, from these and the mass ratio of activated carbon and water, differential enthalpies for the activated carbon, ΔH_DIFacH_{{\rm DIF}_{\rm ac}} and water, ΔH_DIFwH_{{\rm DIF}_{\rm w}} are calculated, and values between –15.95 and –26.81 Jg⁻¹ and between –19.14 and –42.45 Jg⁻¹, respectively are obtained. For low ratios of the mixture, the components’ contributions to the immersion enthalpy of activated carbon and water differ by 3.20 Jg⁻¹.     

Modeling Ar and Kr matrix effect on the ν s (Cl–H) and ν l (Cl–H) of Cl–H···NH3 by the IEF-PCM method

Ar and Kr matrix effect on the geometry and Cl–H stretching (ν _s (Cl–H)) and librational (ν _l (Cl–H)) frequencies of the hydrogen-bonded complex Cl–H···NH₃ are simulated within the framework of polarizable continuum model with integral equation formalism (IEF-PCM) at B3LYP and MP2 levels of theory with the basis set 6-311++G(2df,2pd). Within the framework of B3LYP and IEF-PCM, the simulated gas phase, Ar, and Kr matrix ν _s (Cl–H) of the complex are 2140, 1684, and 1550 cm⁻¹, respectively, which deviate from the experimental values (~2200, 1371, and 1218 cm⁻¹) by −60, 313, and 332 cm⁻¹. Within the framework of MP2 and IEF-PCM, the gas phase, Ar, and Kr matrix ν _s (Cl–H) are calculated as 2366, 2037, and 1957 cm⁻¹ by the harmonic approximation, and as 2177, 1876, and 1665 cm⁻¹ by the full-dimensional anharmonic correction. The matrix effect modeling is of greater importance than the anharmonic correction in accounting for the large experimental gas phase to Ar or Kr matrix shift of the ν _s (Cl–H) (−829 or −982 cm⁻¹). Our calculations do not support the assignment of the 733.8 and 736.9 cm⁻¹ bands to the Ar and Kr matrix ν _l (Cl–H).     

A Novel endo-1,4-β-Mannanase from <Emphasis Type="Italic">Bispora antennata</Emphasis> with Good Adaptation and Stability over a Broad pH Range

An endo-β-1,4-mannanase encoding gene, man5, was cloned from Bispora antennata CBS 126.38, which was isolated from a beech stump. The cDNA of man5 consists of 1,299 base pairs and encodes a 432-amino-acid protein with a theoretical molecular mass of 46.6 kDa. Deduced MAN5 exhibited the highest amino acid sequence identity of 58% to a β-mannanase of glycoside hydrolase family 5 from Aspergillus aculeatus. Recombinant MAN5 was expressed in Pichia pastoris and purified to electrophoretic homogeneity. The specific activity of the final preparation towards locust bean gum was 289 U mg⁻¹. MAN5 showed optimal activity at pH 6.0 and 70 °C and had good adaptation and stability over a broad range of pH values. The enzyme showed more than 60% of peak activity at pH 3.0–8.0 and retained more than 80% of activity after incubation at 37 °C for 1 h in both acid and alkaline conditions (pH 4.0–11.0). The K _m and V _max values were 1.33 mg ml⁻¹ and 444 μmol min⁻¹ mg⁻¹ and 1.17 mg ml⁻¹ and 196 μmol min⁻¹ mg⁻¹ for locust bean gum and konjac flour, respectively. Of all tested metal ions and chemical reagents, Co²⁺, Ni²⁺, and β-mercaptoethanol enhanced the enzyme activity at 1 mM, whereas other chemicals had no effect on or partially inhibited the enzyme activity. MAN5 was highly resistant to acidic and neutral proteases (trypsin, α-chymotrypsin, collagenase, subtilisin A, and proteinase K). By virtue of the favorable properties of MAN5, it is possible to apply this enzyme in the paper and food industries.     

Multispectroscopic DNA interaction studies of a water-soluble nickel(II) complex containing different dinitrogen aromatic ligands

The water-soluble Ni(II) complex, [Ni(bipy)₂(phen-dione)](OAc)₂·2H₂O (bipy = 2,2′-bipyridine and phen-dione = 1,10-phenanthroline-5,6-dione) has been synthesized and characterized by physico-chemical and spectroscopic methods. The binding interactions of this complex with calf thymus DNA (CT-DNA) were investigated using fluorimetry, spectrophotometry, circular dichroism and viscosimetry. In fluorimetric studies, the enthalpy and entropy of the reaction between the complex and CT-DNA showed that the reaction is exothermic (ΔH = −123.9 kJ mol⁻¹; ΔS = −323.5 J mol⁻¹ K⁻¹). The competitive binding studies showed that the complex could not release methylene blue completely. The complex showed absorption hyperchromism in its UV–Vis spectrum with DNA. The calculated binding constant, K _b obtained from UV–Vis absorption studies was 2 × 10⁵ M⁻¹. Moreover, the complex induced detectable changes in the CD spectrum of CT-DNA, as well as changes in its viscosity. The results suggest that this nickel(II) complex interact with CT-DNA via a groove-binding mode.     

Extraction and DFT study on the complexation of the cesium cation with a hexaarylbenzene-based receptor

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Cs⁺(aq) + A⁻(aq) + 1(nb) ⇆ 1·Cs⁺(nb) + A⁻ (nb) taking part in the two-phase water–nitrobenzene system (A⁻ = picrate, 1 = hexaarylbenzene-based receptor; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (1·Cs⁺, A⁻) = 2.8 ± 0.1. Further, the stability constant of the hexaarylbenzene-based receptor·Cs⁺ complex (abbrev. 1·Cs⁺) in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Cs⁺) = 4.7 ± 0.1. By using quantum mechanical DFT calculations, the most probable structure of the 1·Cs⁺ complex species was solved. In this complex having C ₃ symmetry, the cation Cs⁺ synergistically interacts with the polar ethereal oxygen fence and with the central hydrophobic benzene bottom via cation–π interaction. Finally, the calculated binding energy of the resulting complex 1·Cs⁺ is −220.0 kJ/mol, confirming relatively high stability of the considered cationic complex species.     

Detection of proteases using an immunochemical method with haptenylated–gelatin as a solid-phase substrate

A simplified method for the measurement of proteases utilising solid-phase substrates incorporating an ELISA end-point detection step is described. Gelatin–hapten conjugates adsorbed onto polystyrene surfaces were found to be efficient substrates for proteases. Digestion of the solid-phase protein–hapten complexes resulted in proportional desorption of the attached conjugates and decrease in the detectable hapten species. Gelatin–cholic acid conjugates, affinity-purified sheep anti-cholic acid antibody–HRP and a chromogenic substrate were incorporated into a convenient and highly sensitive solid-phase immunochemical method. The detectable signal is inversely proportional to enzyme activity. Bacterial proteases (alpha-chymotrypsin Type II, Type IX from Bacillus polymyxa, Type XIV from Streptomyces griseus, Type XXIV from Bacillus licheniformens) were assayed. Dose–response curves for enzyme activities were measured within ranges of 0–550 μunits mL⁻¹ for chymotrypsin, 0–12 μunits mL⁻¹ for type IX, 0–35 μunits mL⁻¹ for type XIV and 0–100 μunits mL⁻¹ for type XXIV. The detection limits of the proteases studied were 89 μunits mL⁻¹ for chymotrypsin, 0.26 μunits mL⁻¹ for type IX, 5.8 μunits mL⁻¹ for type XIV and 6.5 μunits mL⁻¹ for type XXIV. It was demonstrated that the two-step immunochemical method combines the simplicity and sensitivity of solid-phase enzyme immunoassays, the broad specificity of gelatin as a protease substrate and the flexibility of the solid-phase format.     

Stir-bar-sorptive extraction and ultra-high-performance liquid chromatography–tandem mass spectrometry for simultaneous analysis of UV filters and antimicrobial agents in water samples

Stir-bar-sorptive extraction (SBSE) with liquid desorption (LD) and ultra-high-performance liquid chromatography–electrospray ionization triple-quadrupole tandem mass spectrometry (UHPLC–(ESI)MS–MS) were used for analysis of six personal care products in environmental water: four UV filters (2,2-dihydroxy-4-methoxybenzophenone, benzophenone-3, octocrylene, and octyldimethyl-p-aminobenzoic acid) and two antimicrobial agents (triclocarban and triclosan). Experimental conditions that affect SBSE-LD sorption efficiency (extraction time and temperature, sample pH, and ionic strength) and desorption efficiency (solvent, temperature, and time) were optimized. The method proved to be sensitive—a 50-mL sample was used to determine these compounds in environmental waters at trace levels. The detection limits of the analytical method were 2.5 ng L⁻¹ for river water and 5–10 ng L⁻¹ for effluent and influent sewage water. In river waters, benzophenone-3 was found at levels from 6 ng L⁻¹ to 28 ng L⁻¹ and triclosan at levels <LOQ. Benzophenone-3 was found between 75 and 127 ng L⁻¹ in influent sewage, whereas concentrations of benzophenone-3 and triclosan were commonly below 25 ng L⁻¹ in effluent sewage.     

Synthesis, characterization and catecholase-like activity of [Mn2L2(μ1,5-dca)2(dca)2]·H2O [L?=?N,N′-ethylenebis(2-benzoylpyridineimine), dca?=?dicyanamide]

A dinuclear Mn^II complex, namely [Mn₂L₂(μ_1,5-dca)₂(dca)₂]·H₂O [L = N,N′-ethylenebis(2-benzoylpyridineimine), dca = dicyanamide], has been synthesized and structurally characterized in order to study its catecholase-like activity. Single-crystal X-ray analysis revealed that the molecule possesses a center of inversion at the midpoint of the line bisecting the adjacent metal centers of the dimers. The coordination number of each Mn^II center is seven, and the coordination geometry is approximately distorted pentagonal bipyramid. The complex is an efficient catalyst for the oxidation of 3,5-di-tert-butylcatechol to 3,5-di-tert-butylbenzoquinone under air in methanol solution but is inactive in acetonitrile solution. A kinetic study of the catalysis was treated on the basis of the Michaelis–Menten model and reveals high turnover numbers (k _cat = 4.5 × 10² h⁻¹) in methanol.     

Rapid determination of anilines in water samples by dispersive liquid-liquid microextraction based on solidification of floating organic drop prior to gas chromatography-mass spectrometry

A rapid, sensitive and environmentally friendly method for the analysis of 14 anilines in water samples by dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME-SFO) prior to gas chromatography–mass spectrometry (GC-MS) was developed and optimized. In the proposed method, cyclohexane was used as the extraction solvent as its toxicity was much lower than that of the solvent usually used in dispersive liquid–liquid microextraction (DLLME). In the optimized conditions, the method exhibited good analytical performance. Based on a signal-to-noise ratio of 3, limits of detection for anilines were in the range of 0.07 to 0.29 μg L⁻¹, and the linear range was 0.5–200 μg L⁻¹ with regression coefficients (r ²) higher than 0.9977. It was efficient for qualitative and quantitative analysis of anilines in water samples. The relative standard deviations varied from 2.9 to 8.6 % depending on different compounds indicating good precision. Tap water and river water were selected for evaluating the application to real water samples. The relative recoveries of anilines for the two real samples spiked with 10 μg L⁻¹ anilines were in the scope of 78.2–114.6 % and 77.3–115.6 %, respectively.     

Separation and determination of selenium in water samples by the combination of APDC coprecipitation: X-ray fluorescence spectrometry

A sensitive and non chromatographic analytical procedure for the separation of inorganic selenium species in natural water has been performed. A combination of APDC coprecipitation and determination by an absolute thin layer Energy dispersive X-ray fluorescence spectrometry method was used. The influence of various analytical parameters such as element concentration, oxidation states and pH on the recoveries of Se (IV) was examined. The presence of organic matter and bicarbonate anions, typical components in Cuban groundwater samples, was also tested. Negligible matrix effects were observed. At pH 4 a 100% recovery was found for Se (IV). The coprecipitation recovery of the oxidized selenium species (Se (VI)) was null for the selected concentration range (5–100 μg L⁻¹). When the Se (VI) was reduced by heating the solution with 4 mol L⁻¹ HCl, quantitative recovery was also obtained. The determination of total selenium was conducted by the application of the oxidation–reduction process and the analytical procedure for Se (IV). Se (VI) content was calculated as the difference between total selenium and Se (IV). The detection limit was 0.13 μg L⁻¹. The relative standard deviation was lower than 3.5% for 5 μg L⁻¹ of Se (IV). The trueness of the method was verified by using standardized hydride generation-atomic absorption spectrometry technique. The results obtained using the EDXRF technique were in good agreement with the ones determined by HG-AAS. The proposed method was applied to the determination of Se (IV) in surface water and groundwater samples.