Synthesis, gas-phase photoelectron spectroscopic, and theoretical studies of stannylated dinuclear iron dithiolates

Stannylated dinuclear iron dithiolates (mu-SSnMe(2)CH(2)S)[Fe(CO)(3)](2), (mu-SCH(2)SnMe(2)CH(2)S) [Fe(CO)(3)](2), and (mu-SCH(2)SnMe(3))(2)[Fe(CO)(3)](2), which are structurally similar to the active site of iron-only hydrogenase, were synthesized and studied by gas-phase photoelectron spectroscopy. The orbital origins of ionizations were assigned by comparison of He I and He II photoelectron spectra and with the aid of hybrid density functional electronic structure calculations. Stannylation lowers the ionization energy of sulfur lone pair orbitals in these systems owing to a geometry-dependent interaction. The Fe-Fe sigma bond, which is the HOMO in all these systems, is also substantially destabilized by stannylation due to a previously unrecognized geometry-dependent interaction between axial sulfur lone pair orbitals and the Fe-Fe sigma bond. Since cleaving the Fe-Fe sigma bond is a key step in the mechanism of action of iron-only hydrogenase, these newly recognized geometry-dependent interactions may be utilized in designing biologically inspired hydrogenase catalysts.     

Catalysis of H(2)/D(2) scrambling and other H/D exchange processes by [Fe]-hydrogenase model complexes

Protonation of the [Fe]-hydrogenase model complex (mu-pdt)[Fe(CO)(2)(PMe(3))](2) (pdt = SCH(2)CH(2)CH(2)S) produces a species with a high field (1)H NMR resonance, isolated as the stable [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+)[PF(6)](-) salt. Structural characterization found little difference in the 2Fe2S butterfly cores, with Fe.Fe distances of 2.555(2) and 2.578(1) A for the Fe-Fe bonded neutral species and the bridging hydride species, respectively (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Yarbrough, J. C.; Darensbourg, M. Y. J. Am. Chem. Soc. 2001, 123, 9710). Both are similar to the average Fe.Fe distance found in structures of three Fe-only hydrogenase active site 2Fe2S clusters: 2.6 A. A series of similar complexes (mu-edt)-, (mu-o-xyldt)-, and (mu-SEt)(2)[Fe(CO)(2)(PMe(3))](2) (edt = SCH(2)CH(2)S; o-xyldt = SCH(2)C(6)H(4)CH(2)S), (mu-pdt)[Fe(CO)(2)(PMe(2)Ph)](2), and their protonated derivatives likewise show uniformity in the Fe-Fe bond lengths of the neutral complexes and Fe.Fe distances in the cationic bridging hydrides. The positions of the PMe(3) and PMe(2)Ph ligands are dictated by the orientation of the S-C bonds in the (mu-SRS) or (mu-SR)(2) bridges and the subsequent steric hindrance of R. The Fe(II)(mu-H)Fe(II) complexes were compared for their ability to facilitate H/D exchange reactions, as have been used as assays of H(2)ase activity. In a reaction that is promoted by light but inhibited by CO, the [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) complex shows H/D exchange activity with D(2), producing [(mu-D)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) in CH(2)Cl(2) and in acetone, but not in CH(3)CN. In the presence of light, H/D scrambling between D(2)O and H(2) is also promoted by the Fe(II)(mu-H)Fe(II) catalyst. The requirement of an open site suggests that the key step in the reactions involves D(2) or H(2) binding to Fe(II) followed by deprotonation by the internal hydride base, or by external water. As indicated by similar catalytic efficiencies of members of the series, the nature of the bridging thiolates has little influence on the reactions. Comparison to [Fe]H(2)ase enzyme active site redox levels suggests that at least one Fe(II) must be available for H(2) uptake while a reduced or an electron-rich Fe(I)Fe(I) metal-metal bonded redox level is required for proton uptake.     

(NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')]: an iron thiolate complex modeling the [Fe(CN)(2)(CO)(S-Cys)(2)] site of [NiFe] hydrogenase centers

In the search for complexes modeling the [Fe(CN)(2)(CO)(cysteinate)(2)] cores of the active centers of [NiFe] hydrogenases, the complex (NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')] (4) was found ('S(3)'(2-)=bis(2-mercaptophenyl)sulfide(2-)). Starting complex for the synthesis of 4 was [Fe(CO)(2)('S(3)')](2) (1). Complex 1 formed from [Fe(CO)(3)(PhCH=CHCOMe)] and neutral 'S(3)'-H(2). Reactions of 1 with PCy(3) or DPPE (1,2-bis(diphenylphosphino)ethane) yielded diastereoselectively [Fe(CO)(2)(PCy(3))('S(3)')] (2) and [Fe(CO)(dppe)('S(3)')] (3). The diastereoselective formation of 2 and 3 is rationalized by the trans influence of the 'S(3)'(2-) thiolate and thioether S atoms which act as pi donors and pi acceptors, respectively. The trans influence of the 'S(3)'(2-) sulfur donors also rationalizes the diastereoselective formation of the C(1) symmetrical anion of 4, when 1 is treated with four equivalents of NEt(4)CN. The molecular structures of 1, 3 x 0.5 C(7)H(8), and (AsPh(4))(2)[Fe(CN)(2)(CO)('S(3)')] x acetone (4 a x C(3)H(6)O) were determined by X-ray structure analyses. Complex 4 is the first complex that models the unusual 2:1 cyano/carbonyl and dithiolate coordination of the [NiFe] hydrogenase iron site. Complex 4 can be reversibly oxidized electrochemically; chemical oxidation of 4 by [Fe(Cp)(2)PF(6)], however, led to loss of the CO ligand and yielded only products, which could not be characterized. When dissolved in solvents of increasing proton activity (from CH(3)CN to buffered H(2)O), complex 4 exhibits drastic nu(CO) blue shifts of up to 44 cm(-1), and relatively small nu(CN) red shifts of approximately 10 cm(-1). The nu(CO) frequency of 4 in H(2)O (1973 cm(-1)) is higher than that of any hydrogenase state (1952 cm(-1)). In addition, the nu(CO) frequency shift of 4 in various solvents is larger than that of [NiFe] hydrogenase in its most reduced or oxidized state. These results demonstrate that complexes modeling properly the nu(CO) frequencies of [NiFe] hydrogenase probably need a [Ni(thiolate)(2)] unit. The results also demonstrate that the nu(CO) frequency of [Fe(CN)(2)(CO)(thiolate)(2)] complexes is more significantly shifted by changing the solvent than the nu(CO) frequency of [NiFe] hydrogenases by coupled-proton and electron-transfer reactions. The "iron-wheel" complex [Fe(6)[Fe('S(3)')(2)](6)] (6) resulting as a minor by-product from the recrystallization of 2 in boiling toluene could be characterized by X-ray structure analysis.     

Modeling the active sites in metalloenzymes. 3. Density functional calculations on models for [Fe]-hydrogenase: structures and vibrational frequencies of the observed redox forms and the reaction mechanism at the Diiron Active Center.

Optimized structures for the redox species of the diiron active site in [Fe]-hydrogenase as observed by FTIR and for species in the catalytic cycle for the reversible H(2) oxidation have been determined by density-functional calculations on the active site model, [(L)(CO)(CN)Fe(mu-PDT)(mu-CO)Fe(CO)(CN)(L')](q)(L = H(2)O, CO, H(2), H(-); PDT = SCH(2)CH(2)CH(2)S, L' = CH(3)S(-), CH(3)SH; q = 0, 1-, 2-, 3-). Analytical DFT frequencies on model complexes (mu-PDT)Fe(2)(CO)(6) and [(mu-PDT)Fe(2)(CO)(4)(CN)(2)](2)(-) are used to calibrate the calculated CN(-) and CO frequencies against the measured FTIR bands in these model compounds. By comparing the predicted CN(-) and CO frequencies from DFT frequency calculations on the active site model with the observed bands of D. vulgaris [Fe]-hydrogenase under various conditions, the oxidation states and structures for the diiron active site are proposed. The fully oxidized, EPR-silent form is an Fe(II)-Fe(II) species. Coordination of H(2)O to the empty site in the enzyme's diiron active center results in an oxidized inactive form (H(2)O)Fe(II)-Fe(II). The calculations show that reduction of this inactive form releases the H(2)O to provide an open coordination site for H(2). The partially oxidized active state, which has an S = (1)/(2) EPR signal, is an Fe(I)-Fe(II) species. Fe(I)-Fe(I) species with and without bridging CO account for the fully reduced, EPR-silent state. For this fully reduced state, the species without the bridging CO is slightly more stable than the structure with the bridging CO. The correlation coefficient between the predicted CN(-) and CO frequencies for the proposed model species and the measured CN(-) and CO frequencies in the enzyme is 0.964. The proposed species are also consistent with the EPR, ENDOR, and M?ssbauer spectroscopies for the enzyme states. Our results preclude the presence of Fe(III)-Fe(II) or Fe(III)-Fe(III) states among those observed by FTIR. A proposed reaction mechanism (catalytic cycle) based on the DFT calculations shows that heterolytic cleavage of H(2) can occur from (eta(2)-H(2))Fe(II)-Fe(II) via a proton transfer to "spectator" ligands. Proton transfer to a CN(-) ligand is thermodynamically favored but kinetically unfavorable over proton transfer to the bridging S of the PDT. Proton migration from a metal hydride to a base (S, CN, or basic protein site) results in a two-electron reduction at the metals and explains in part the active site's dimetal requirement and ligand framework which supports low-oxidation-state metals. The calculations also suggest that species with a protonated Fe-Fe bond could be involved if the protein could accommodate such species.     

Biomimetic models for the active site of [Fe]hydrogenase featuring an acylmethyl(hydroxymethyl)pyridine ligand

The first acylmethyl(hydroxymethyl)pyridine ligand-containing [Fe]hydrogenase model complexes 2-4 have been synthesized starting from the nucleophilic substitution reaction of 2-(4-MeC(6)H(4)SO(3)CH(2))-6-HOCH(2)C(5)H(3)N with Na(2)Fe(CO)(4). While the reaction course for producing complex 3 via the highly unstable intermediate complex 1 is monitored by in situ IR spectroscopy, the isolated model complexes 2-4 are fully characterized.     

Influences on the rotated structure of diiron dithiolate complexes: electronic asymmetry vs. secondary coordination sphere interaction

In the pursuit of a "rotated" structure, and exploration of the influence of the aza nitrogen lone pair, the Fe(I)Fe(I) model complexes wherein two Fe(CO)(3-x)P(x) moieties are significantly twisted from the ideal configuration (torsion angle >30°) are reported. [Fe(2)(μ-S(CH(2))(2)N(i)Pr(X)(CH(2))(2)S)(CO)(4)(κ(2)-dppe)](2)(2+) (X = H, 4; Me, 5) prepared from protonation and methylation, respectively, of [Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(CO)(4)(κ(2)-dppe)](2), 1, possess Φ angles of 34.1 and 35.4° (av.), respectively. Such dramatic twist is attributed to asymmetric substitution within the Fe(2) unit in which a dppe ligand is coordinated to one Fe site in the κ(2)-mode. In the presence of the N···C(CO(ap)) interaction, the torsion angle is decreased to 10.8°, suggesting availability of lone pairs of the aza nitrogen sites within 1 is in control of the twist. Backbones of the bridging diphosphine ligands also affect distortion. For a shorter ligand, the more compact structure of [Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(μ-dppm)(CO)(4)](2), 7, is formed. Dppm in a bridging manner allows achievement of the nearly eclipsed configuration. In contrast, dppe in [Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(μ-dppe)(CO)(4)](2), 6, could twist the Fe(CO)(3-x)L(x) fragment to adopt the least strained structure. In addition, the NC(CO(ap)) interaction would direct the twist towards a specific direction for the closer contact. In return, the shorter N···C(CO(ap)) distance of 3.721(7) ? and larger Φ angle of 26.5° are obtained in 6. For comparison, 3.987(7) ? and 3.9° of the corresponding parameters are observed in 7. Conversion of (μ-dppe)[Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(CO)(5)](2), 2, to complex 1 via an associative mechanism is studied.     

Protonation studies of the new iron carbonyl cyanide trans-[Fe(CO)3(CN)2]2-: implications with respect to hydrogenases

The new iron carbonyl cyanide trans-[Fe(CN)(2)(CO)(3)](2)(-), [2](2)(-), forms in high yield via photosubstitution of Fe(CO)(5) with 2 equiv of Et(4)NCN. Protonation of [2](2)(-) generated [HFe(CN)(2)(CO)(3)](-), [2H](-), the first H-Fe-CN-CO species. Further protonation gives dihydrogen. This simple system provides insights into hydrogen evolution by the hydrogenase enzymes, which also feature H-Fe-CN-CO centers.     

Synthesis and characterization of diiron dithiolate complexes containing a quinoxaline bridge

A potential model complex for the hydrogenase active site, [Fe(2){(μ-CH(2)S)(2)R}(CO)(6)] (1) (R = quinoxaline), was synthesized by condensation of [(μ-LiS)(2)Fe(2)(CO)(6)] with 2,3-bis(bromomethyl)quinoxaline. Reactions of 1 with bis(diphenylphosphino)methane (dppm) under a range of conditions yielded substituted complexes [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(dppm)] (2), [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(k(2)-dppm)] (3) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(μ-dppm)] (4). X-ray crystallography confirms that in 2, the dppm is terminally bonded to an iron atom via one phosphorus atom, whereas in 3, it acts as a chelating ligand to coordinate to an iron center in a dibasal-substituted manner. In 4, the dppm bridges the two iron atoms in a cis basal/basal fashion with one phosphorus bonded to each iron atom. Treatment of 1 with various tertiary phosphines at room temperature in acetonitrile (MeCN) generates a range of mono-substituted products [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)L] (5, L = PEt(3); 6, PMe(3); 7, PPh(3); 8, Me(2)PPh). With Bu(t)NC, mono- and di-substituted [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(Bu(t)NC)] (9) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(Bu(t)NC)(2)] (10) complexes are generated. All the complexes were characterized by elemental analysis, IR, MS and NMR spectroscopy. IR and NMR spectroscopic studies suggest that addition of excess HBF(4)·OEt(2) acid to 1-4 led to the protonation of quinoxaline nitrogen atoms. In contrast, 5-10 were not stable in acidic media. Electrochemistry of 1-4 was investigated in the acetonitrile medium (0.1 M Bu(4)NPF(6)). The electrochemical instability of the reduced ligand, quinoxaline, and the reduced forms of these complexes revealed from the electrochemical studies suggests that they do not provide ideal models of the hydrogenase active site.     

Coordination sphere flexibility of active-site models for Fe-only hydrogenase: studies in intra- and intermolecular diatomic ligand exchange.

A series of dinuclear complexes, (mu-SRS)Fe(2)(CO)(6) (R = -CH(2)CH(2)-, -CH(2)CH(2)CH(2)-, -CH(2)-C(6)H(4)-CH(2)-; edt, pdt, and o-xyldt, respectively) has been examined for specific characteristics that might relate to structural similarity with the active site of Fe-only hydrogenases. Variable-temperature proton NMR studies display the fluxionality of the iron-dithiocyclohexane unit in (mu-pdt)Fe(2)(CO)(6) while in the (mu-o-xyldt)Fe(2)(CO)(6) compound, the bridge is fixed. Temperature-dependent (13)C NMR spectral studies establish intramolecular CO site exchange localized on discrete Fe(CO)(3) units in all complexes, which is influenced by steric effects of the mu-SRS unit. Kinetic studies of intermolecular CO/CN(-) ligand-exchange reactions establish associative or I(a) mechanisms in sequential steps to form the dicyano dianion, (mu-SRS)[Fe(CO)(2)(CN)](2)(=) with 100% selectivity. Theoretical calculations (DFT) of transition states in the intramolecular site-exchange processes lead to a rationale for the interesting cooperativity in the CN(-)/CO intermolecular ligand-exchange process. The hinge motion of the three light atom S-to-S bridge is related to a possible heterolytic H(2) activation/production process in the enzyme.     

Synthetic and structural studies on new diiron azadithiolate (ADT)-type model compounds for active site of [FeFe]hydrogenases

A series of new diiron azadithiolate (ADT) complexes (1-8), which could be regarded as the active site models of [FeFe]hydrogenases, have been synthesized starting from parent complex [(μ-SCH(2))(2)NCH(2)CH(2)OH]Fe(2)(CO)(6) (A). Treatment of A with ethyl malonyl chloride or malonyl dichloride in the presence of pyridine afforded the malonyl-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(6) (1) and [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (2). Further treatment of 1 and 2 with PPh(3) under different conditions produced the PPh(3)-substituted complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (3), [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(4)(PPh(3))(2) (4), and [Fe(2)(CO)(5)(PPh(3))(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (5). More interestingly, complexes 1-3 could react with C(60) in the presence of CBr(4) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) via Bingel-Hirsch reaction to give the C(60)-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(6) (6), [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)C(C(60)) (7), and [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (8). The new ADT-type models 1-8 were characterized by elemental analysis and spectroscopy, whereas 2-4 were further studied by X-ray crystallography and 6-8 investigated in detail by DFT methods.     

Modeling [Fe-Fe] hydrogenase: evidence for bridging carbonyl and distal iron coordination vacancy in an electrocatalytically competent proton reduction by an iron thiolate assembly that operates through Fe(0)-Fe(II) levels

IR spectroelectrochemistry of Fe4{Me(CH2S)3}2(CO)8 (4Fe6S) in the nu(CO) region shows that the neutral and anion forms have all their CO groups terminally bound to the Fe atoms; however, for the dianion there is a switch of the coordination mode of at least one of the CO groups. The available structural and nu(CO) spectra are closely reproduced by density-functional theory calculations. The calculated structure of 4Fe6S2- closely mirrors that of the diiron subsite of the [Fe-Fe] hydrogenase H cluster with a bridging CO group and an open coordination site on the outer Fe atom of pairs of dithiolate-bridged Fe0FeII subunits connected by two bridging thiolates. Geometry optimization based on the all-terminal CO isomer of 4Fe6S2- does not give a stable structure but reveals a second-order saddle point ca. 11.53 kcal mol(-1) higher in energy than the CO-bridged form. Spectroelectrochemical studies of electrocatalytic proton reduction by 4Fe6S show that slow turnover from the primary reduction process (E1/2'=-0.71 V vs Ag/AgCl) involves rate-limiting protonation of 4Fe6S- followed by reduction to H:4Fe6S-. Rapid electrocatalytic proton reduction is obtained at potentials sufficient to access 4Fe6S2-, where the rate of dihydrogen elimination from the FeIIFeII core of 4Fe6S is ca. 500 times faster than that from the FeIFeI core of Fe2(mu-S(CH2)3S)(CO)6. The dramatically increased rate of electrocatalysis obtained from 4Fe6S over all previously identified model compounds appears to be related to the features uniquely common between it and the H-cluster, namely, that turnover involves the same formal redox states of the diiron unit (FeIFeII and Fe0FeII), the presence of an open site on the outer Fe atom of the Fe0FeII unit, and the thiolate-bridge to a second one-electron redox unit.     

Synthetic and structural studies on [Fe2(SR)2(CN)x(CO)6-x](x-) as active site models for Fe-only hydrogenases.

A series of models for the active site (H-cluster) of the iron-only hydrogenase enzymes (Fe-only H2-ases) were prepared. Treatment of MeCN solutions of Fe2(SR)2(CO)6 with 2 equiv of Et4NCN gave [Fe2(SR)2(CN)2(CO)4](2-) compounds. IR spectra of the dicyanides feature four nu(CO) bands between 1965 and 1870 cm(-1) and two nu(CN) bands at 2077 and 2033 cm(-1). For alkyl derivatives, both diequatorial and axial-equatorial isomers were observed by NMR analysis. Also prepared were a series of dithiolate derivatives (Et4N)2[Fe2(SR)2(CN)2(CO)4], where (SR)2 = S(CH2)2S, S(CH2)3S. Reaction of Et4NCN with Fe2(S-t-Bu)2(CO)6 gave initially [Fe2(S-t-Bu)2(CN)2(CO)4](2-), which comproportionated to give [Fe2(S-t-Bu)2(CN)(CO)5](-). The mechanism of the CN(-)-for-CO substitution was probed as follows: (i) excess CN(-) with a 1:1 mixture of Fe2(SMe)2(CO)6 and Fe2(SC6H4Me)2(CO)6 gave no mixed thiolates, (ii) treatment of Fe2(S2C3H6)(CO)6 with Me3NO followed by Et4NCN gave (Et4N)[Fe2(S2C3H6)(CN)(CO)5], which is a well-behaved salt, (iii) treatment of Fe2(S2C3H6)(CO)6 with Et4NCN in the presence of excess PMe3 gave (Et4N)[Fe2(S2C3H6)(CN)(CO)4(PMe3)] much more rapidly than the reaction of PMe3 with (Et4N)[Fe2(S2C3H6)(CN)(CO)5], and (iv) a competition experiment showed that Et4NCN reacts with Fe2(S2C3H6)(CO)6 more rapidly than with (Et4N)[Fe2(S2C3H6)(CN)(CO)5]. Salts of [Fe2(SR)2(CN)2(CO)4](2-) (for (SR)2 = (SMe)2 and S2C2H4) and the monocyanides [Fe2(S2C3H6)(CN)(CO)5](-) and [Fe2(S-t-Bu)2(CN)(CO)5](-) were characterized crystallographically; in each case, the Fe-CO distances were approximately 10% shorter than the Fe-CN distances. The oxidation potentials for Fe2(S2C3H6)(CO)4L2 become milder for L = CO, followed by MeNC, PMe3, and CN(-); the range is approximately 1.3 V. In water,oxidation of [Fe2(S2C3H6)(CN)2(CO)4](2-) occurs irreversibly at -0.12 V (Ag/AgCl) and is coupled to a second oxidation.     

Activation of alkenes and H2 by [Fe]-H2ase model complexes

The established ability of the Fe(II) bridging hydride species (micro-H)(micro-pdt)[Fe(CO)2(PMe3)]2+, 1-H+, to take-up and heterolytically activate dihydrogen, resulting in H/D scrambling of H2/D2 and H2/D2O mixtures (Zhao et al. Inorg. Chem. 2002, 41, 3917) has prompted a study of simultaneous alkene/H2 activation by such [Fe]H2ase model complexes. That the required photolysis produced an open site was substantiated by substitution of CO in 1-H+ by CH3CN with formation of structurally characterized [(micro-H)(micro-pdt)[Fe(CO)2(PMe3)][Fe(CO)(CH3CN)(PMe3)]]+[PF6]-. Under similar photolytic conditions, H/D exchange reactions between D2 and terminal alkenes (ethylene, propene and 1-butene), but not bulkier alkenes such as 2-butene or cyclohexene, were catalyzed by 1-H+ and the edt (SCH2CH2S) analogue, 2-H+. Substantial regioselectivity for H/D exchange at the internal vinylic hydrogen was observed. The extent to which the olefins were deuterium enriched vs deuterated was catalyst dependent. The stabilizing effect of the binuclear chelating ligands, SCH2CH2CH2S, pdt, and SCH2CH2S, edt, is required for the activity of binuclear catalysts, as the mono-dentate micro-SEt analogue decomposed to inactive products under the photolytic conditions of the catalysis. Reactions of 1 and 2 with EtOSO2CF3 yielded the S-alkylated products, [(micro-SCH2CH2CH2SEt)[Fe(CO)2(PMe3)]2]+[SO3CF3]- (1-Et+), and 2-Et+, rather than micro-C2H5 analogues to the micro-H of 1-H+. The stability and lack of reactivity toward H2 of 1-Et+ and 2-Et+, indicates they are not on the reaction path of the olefin/D2 H/D exchange process. A mechanism with olefin binding to an open site created by CO loss and formation of an Fe-(CH2CHDR) intermediate is indicated. A likely role of a binuclear chelate effect is implicated for the unique S-XXX-S cofactor in the active site of [Fe]H2ase.     

Dissecting the intimate mechanism of cyanation of {2Fe3S} complexes related to the active site of all-iron hydrogenases by DFT analysis of energetics, transition states, intermediates and products in the carbonyl substitution pathway

A bridging carbonyl intermediate with key structural elements of the diiron sub-site of all-iron hydrogenase has been experimentally observed in the CN/CO substitution pathway of the {2Fe3S} carbonyl precursor, [Fe(2)(CO)(5){MeSCH(2)C(Me)(CH(2)S)(2)}]. Herein we have used density functional theory (DFT) to dissect the overall substitution pathway in terms of the energetics and the structures of transition states, intermediates and products. We show that the formation of bridging CO transitions states is explicitly involved in the intimate mechanism of dicyanation. The enhanced rate of monocyanation of {2Fe3S} over the {2Fe2S} species [Fe(2)(CO)(6){CH(2)(CH(2)S)(2)}] is found to rest with the ability of the thioether ligand to both stabilise a mu-CO transition state and act as a good leaving group. In contrast, the second cyanation step of the {2Fe3S} species is kinetically slower than for the {2Fe2S} monocyanide because the Fe2 atom is deactivated by coordination of the electron-donating thioether group. In addition, hindered rotation and the reaction coordinate of the approaching CN(-) group, are other factors which explain reactivity differences in {2Fe2S} and {2Fe3S} systems. The intermediate species formed in the second cyanation step of {2Fe3S} species is a mu-CO species, confirming the structural assignment made on the basis of FT-IR data (S. J. George, Z. Cui, M. Razavet, C. J. Pickett, Chem. Eur. J. 2002, 8, 4037-4046). In support of this we find that computed and experimental IR frequencies of structurally characterised {2Fe3S} species and those of the bridging carbonyl intermediate are in excellent agreement. In a wider context, the study may provide some insight into the reactivity of dinuclear systems in which neighbouring group on-off coordination plays a role in substitution pathways.     

Carbene-pyridine chelating 2Fe2S hydrogenase model complexes as highly active catalysts for the electrochemical reduction of protons from weak acid (HOAc)

Two asymmetrically disubstituted diiron complexes (micro-pdt)[Fe(CO)(3)][Fe(CO)(eta(2)-L)] (L = 1-methyl-3-(2-pyridyl)imidazol-2-ylidene (NHC(MePy)), 2; 1,3-bis(2-picolyl)imidazol-2-ylidene (NHC(diPic)), 4) and a mono-substituted diiron complex (mu-pdt)[Fe(CO)(3)][Fe(CO)(2)(NHC(diPic))] (3) were prepared as biomimetic models of the Fe-only hydrogenase active site. X-Ray studies show that the NHC(MePy) and NHC(diPic) ligands in 2 and 4 each coordinate to the single iron atom as NHC-Py chelating ligands in two basal positions and the NHC(diPic) ligand of complex 3 lies in an apical position as a monodentate ligand. The large ranges of the highest and the lowest nu(CO) frequencies of 2 and 4 reflect that the relatively uneven electron density on the two iron atoms of the 2Fe2S model complexes 2 and 4 is as that observed for mono-substituted diiron complexes of good donor ligands. The cyclic voltammograms and the electrochemical proton reduction by 2 and 3 were studied in the presence of HOAc to evaluate the effect of asymmetrical substitution of strong donor ligands on the redox properties of the iron atoms and on the electrocatalytic activity for proton reduction.     

Connecting [NiFe]- and [FeFe]-Hydrogenases: Mixed-Valence Nickel-Iron Dithiolates with Rotated Structures

New mixed-valence iron-nickel dithiolates are described that exhibit structures similar to those of mixed-valence diiron dithiolates. The interaction of tricarbonyl salt [(dppe)Ni(pdt)Fe(CO)(3)]BF(4) ([1]BF(4), where dppe = Ph(2)PCH(2)CH(2)PPh(2) and pdt(2-) = -SCH(2)CH(2)CH(2)S-) with P-donor ligands (L) afforded the substituted derivatives [(dppe)Ni(pdt)Fe(CO)(2)L]BF(4) incorporating L = PHCy(2) ([1a]BF(4)), PPh(NEt(2))(2) ([1b]BF(4)), P(NMe(2))(3) ([1c]BF(4)), P(i-Pr)(3) ([1d]BF(4)), and PCy(3) ([1e]BF(4)). The related precursor [(dcpe)Ni(pdt)Fe(CO)(3)]BF(4) ([2]BF(4), where dcpe = Cy(2)PCH(2)CH(2)PCy(2)) gave the more electron-rich family of compounds [(dcpe)Ni(pdt)Fe(CO)(2)L]BF(4) for L = PPh(2)(2-pyridyl) ([2a]BF(4)), PPh(3) ([2b]BF(4)), and PCy(3) ([2c]BF(4)). For bulky and strongly basic monophosphorus ligands, the salts feature distorted coordination geometries at iron: crystallographic analyses of [1e]BF(4) and [2c]BF(4) showed that they adopt "rotated" Fe(I) centers, in which PCy(3) occupies a basal site and one CO ligand partially bridges the Ni and Fe centers. Like the undistorted mixed-valence derivatives, members of the new class of complexes are described as Ni(II)Fe(I) (S = (1)/(2)) systems according to electron paramagnetic resonance spectroscopy, although with attenuated (31)P hyperfine interactions. Density functional theory calculations using the BP86, B3LYP, and PBE0 exchange-correlation functionals agree with the structural and spectroscopic data, suggesting that the spin for [1e](+) is mostly localized in a Fe(I)-centered d(z(2)) orbital, orthogonal to the Fe-P bond. The PCy(3) complexes, rare examples of species featuring "rotated" Fe centers, both structurally and spectroscopically incorporate features from homobimetallic mixed-valence diiron dithiolates. Also, when the NiS(2)Fe core of the [NiFe]-hydrogenase active site is reproduced, the "hybrid models" incorporate key features of the two major classes of hydrogenase. Furthermore, cyclic voltammetry experiments suggest that the highly basic phosphine ligands enable a second oxidation corresponding to the couple [(dxpe)Ni(pdt)Fe(CO)(2)L](+/2+). The resulting unsaturated 32e(-) dications represent the closest approach to modeling the highly electrophilic Ni-SI(a) state. In the case of L = PPh(2) (2-pyridyl), chelation of this ligand accompanies the second oxidation.     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.     

Oxidative addition of phosphine-tethered thiols to iron carbonyl: binuclear phosphinothiolate complexes, (mu-SCH(2)CH(2)PPh(2))(2)Fe(2)(CO)(4), and hydride derivatives

The mononuclear complex Fe(CO)(4)(PPh(2)CH(2)CH(2)SH), 1, is isolated as an intermediate in the overall reaction of PPh(2)CH(2)CH(2)SH with [Fe(0)(CO)(4)] sources to produce binuclear bridging thiolate complexes. Photolysis is required for loss of CO and subsequent S-H activation to generate the metal-metal bonded Fe(I)-Fe(I) complex, (mu-SCH(2)CH(2)PPh(2))(2)Fe(2)(CO)(4), 2. Isomeric forms of 2 derive from the apical or basal position of the P-donor ligand in the pseudo square pyramidal S(2)Fe(CO)(2)P coordination spheres. This position in turn is dictated by the stereochemistry of the mu-S-CH(2) bond, designated as syn or anti with respect to the Fe(2)S(2) butterfly core. Addition of strong acids engages the Fe(I)-Fe(I) bond density as a bridging hydride, [(mu-H)-anti-2](+)[SO(3)CF(3)](-) or [(mu-H)-syn-2](+)[SO(3)CF(3)](-), with formal oxidation to Fe(II)-H-Fe(II). Molecular structures of anti-2, syn-2, and [(mu-H)-anti-2](+)[SO(3)CF(3)](-) were determined by X-ray crystallography and show insignificant differences in distance and angle metric parameters, including the Fe-Fe bond distances which average 2.6 A. The lack of coordination sphere rearrangements is consistent with the ease with which deprotonation occurs, even with the weak base, chloride. The Fe(I)-Fe(I) bond, supported by bridging thiolates, therefore presents a site where a proton might be taken up and stored as a hydride without impacting the overall structure of the binuclear complex.     

Solution-phase photochemistry of a [FeFe]hydrogenase model compound: evidence of photoinduced isomerisation

The solution-phase photochemistry of the [FeFe] hydrogenase subsite model (μ-S(CH(2))(3)S)Fe(2)(CO)(4)(PMe(3))(2) has been studied using ultrafast time-resolved infrared spectroscopy supported by density functional theory calculations. In three different solvents, n-heptane, methanol, and acetonitrile, relaxation of the tricarbonyl intermediate formed by UV photolysis of a carbonyl ligand leads to geminate recombination with a bias towards a thermodynamically less stable isomeric form, suggesting that facile interconversion of the ligand groups at the Fe center is possible in the unsaturated species. In a polar or hydrogen bonding solvent, this process competes with solvent substitution leading to the formation of stable solvent adduct species. The data provide further insight into the effect of incorporating non-carbonyl ligands on the dynamics and photochemistry of hydrogenase-derived biomimetic compounds.     

Requirements for functional models of the iron hydrogenase active site: D2/H2O exchange activity in ((mu-SMe)(mu-pdt)[Fe(CO)2(PMe3)]2+)[BF4-

Hydrogen uptake in hydrogenase enzymes can be assayed by H/D exchange reactivity in H(2)/D(2)O or H(2)/D(2)/H(2)O mixtures. Diiron(I) complexes that serve as structural models for the active site of iron hydrogenase are not active in such isotope scrambling but serve as precursors to Fe(II)Fe(II) complexes that are functional models of [Fe]H(2)ase. Using the same experimental protocol as used previously for ((mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)(+)), 1-H(+) (Zhao et al. J. Am. Chem. Soc. 2001, 123, 9710), we now report the results of studies of ((mu-SMe)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)(+)), 1-SMe(+), toward H/D exchange. The 1-SMe(+) complex can take up H(2) and catalyze the H/D exchange reaction in D(2)/H(2)O mixtures under photolytic, CO-loss conditions. Unlike 1-H(+), it does not catalyze H(2)/D(2) scrambling under anhydrous conditions. The molecular structure of 1-SMe(+) involves an elongated Fe.Fe separation, 3.11 A, relative to 2.58 A in 1-H(+). It is proposed that the strong SMe(-) bridging ligand results in catalytic activity localized on a single Fe(II) center, a scenario that is also a prominent possibility for the enzyme active site. The single requirement is an open site on Fe(II) available for binding of D(2) (or H(2)), followed by deprotonation by the external base H(2)O (or D(2)O).