Design of Single‐Site Photocatalysts by Using Metal–Organic Frameworks as a Matrix

Single‐site photocatalysts generally display excellent photocatalytic activity and considerably high stability compared with homogeneous catalytic systems. A rational structural design of single‐site photocatalysts with isolated, uniform, and spatially separated active sites in a given solid is of prime importance to achieve high photocatalytic activity. Intense attention has been focused on the design and fabrication of single‐site photocatalysts by using porous materials as a platform. Metal–organic frameworks (MOFs) have great potential in the design and fabrication of single‐site photocatalysts due to their remarkable porosity, ultrahigh surface area, extraordinary tailorability, and significant diversity. MOFs can provide an abundant number of binding sites to anchor active sites, which results in a significant enhancement in photocatalytic performance. In this focus review, the development of single‐site MOF photocatalysts that perform important and challenging chemical redox reactions, such as photocatalytic H₂ production, photocatalytic CO₂ conversion, and organic transformations, is summarized thoroughly. Successful strategies for the construction of single‐site MOF photocatalysts are summarized and major challenges in their practical applications are noted.     

Metal–Organic Frameworks for the Exploitation of Distance between Active Sites in Efficient Photocatalysis

Discoveries of the accurate spatial arrangement of active sites in biological systems and cooperation between them for high catalytic efficiency are two major events in biology. However, precise tuning of these aspects is largely missing in the design of artificial catalysts. Here, a series of metal–organic frameworks (MOFs) were used, not only to overcome the limit of distance between active sites in bio‐systems, but also to unveil the critical role of this distance for efficient catalysis. A linear correlation was established between photocatalytic activity and the reciprocal of inter active‐site distance; a smaller distance led to higher activity. Vacancies created at selected crystallographic positions of MOFs promoted their photocatalytic efficiency. MOF‐525‐J33 with 15.6 Å inter active‐site distance and 33 % vacancies exhibited unprecedented high turnover frequency of 29.5 h^?1 in visible‐light‐driven acceptorless dehydrogenation of tetrahydroquinoline at room temperature.     

Layer‐by‐layer ionomer films made from poly(styrene‐co‐styrenesulfonic acid) and poly(methyl methacrylate‐co‐4‐vinylpyridine) in tetrahydrofuran

Thin films were fabricated layer‐by‐layer (LbL) via ionic bonds formed between a cationic ionomer and an anionic ionomer, which were produced via proton transfer from poly(styrene‐co‐styrenesulfonic acid) to poly(methyl methacrylate‐co‐4‐vinylpyridine) in an organic solvent, tetrahydrofuran. Ionic contents of the ionomers were very low down to 5.6 mol %, much lower than usual polyelectrolytes. The build up of the LbL films was demonstrated by UV/vis spectroscopy: the absorbance of the phenyl rings in styrene residues increased with the number of depositions (thus the number of layers). Transmission electron microscopy observation of strained thin films showed unique deformation mode, involving many bands that developed both in the parallel and perpendicular directions to the stress axis. This is quite different from the deformation modes seen for ionomer blend films and for coextruded polystyrene/poly(methyl methacrylate) multilayer tapes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 101–105, 2012     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

Ultra‐Fast Degradation of Chemical Warfare Agents Using MOF–Nanofiber Kebabs

The threat associated with chemical warfare agents (CWAs) motivates the development of new materials to provide enhanced protection with a reduced burden. Metal–organic frame‐works (MOFs) have recently been shown as highly effective catalysts for detoxifying CWAs, but challenges still remain for integrating MOFs into functional filter media and/or protective garments. Herein, we report a series of MOF–nanofiber kebab structures for fast degradation of CWAs. We found TiO₂ coatings deposited via atomic layer deposition (ALD) onto polyamide‐6 nanofibers enable the formation of conformal Zr‐based MOF thin films including UiO‐66, UiO‐66‐NH₂, and UiO‐67. Cross‐sectional TEM images show that these MOF crystals nucleate and grow directly on and around the nanofibers, with strong attachment to the substrates. These MOF‐functionalized nanofibers exhibit excellent reactivity for detoxifying CWAs. The half‐lives of a CWA simulant compound and nerve agent soman (GD) are as short as 7.3 min and 2.3 min, respectively. These results therefore provide the earliest report of MOF–nanofiber textile composites capable of ultra‐fast degradation of CWAs.     

Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

原位配体功能化策略制备共价金属有机骨架促进其析氢反应

新型多孔材料在诸多领域具有广阔的应用前景,其发展引起了研究者较大关注.在过去的十年中,大量的先进多孔材料被设计并应用于不同领域.其中,共价有机骨架(COFs)和金属有机骨架(MOFs)材料由于具有结构多样、孔隙可调以及功能多样等独特性质,得到了广泛研究.为了有效地结合各个组分的优点以获得最优性能,科研工作者投入了大量的...     

Defect‐Controlled Preparation of UiO‐66 Metal–Organic Framework Thin Films with Molecular Sieving Capability

Metal–organic framework (MOF) UiO‐66 thin films are solvothermally grown on conducting substrates. The as‐synthesized MOF thin films are subsequently dried by a supercritical process or treated with polydimethylsiloxane (PDMS). The obtained UiO‐66 thin films show excellent molecular sieving capability as confirmed by the electrochemical studies for redox‐active species with different sizes.     

Self‐(Un)rolling Biopolymer Microstructures: Rings,Tubules, and Helical Tubules from the Same Material

We have demonstrated the facile formation of reversible and fast self‐rolling biopolymer microstructures from sandwiched active–passive, silk‐on‐silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self‐roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self‐rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic‐soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer‐by‐layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH‐triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.     

Electropolymerization of layer‐by‐layer precursor polymer films

The layer‐by‐layer (LbL) self‐assembly has been used to fabricate polymer thin films on any solid substrates. The multilayer polymer thin films are constructed by alternating adsorption of anionic and cationic polymers. Polyelectrolyte multilayer ultrathin films containing anionic poly[2‐(thiophen‐3‐yl)ethyl methacrylate‐co‐methacrylic acid]; P(TEM‐co‐MA) and cationic poly[4‐(9H‐carbazol‐9‐yl)‐N‐butyl‐4‐vinyl pyridium bromide]; P4VPCBZ, were fabricated. The growth of multilayer ultrathin films was followed by UV–Vis absorption spectrophotometer and surface plasmon resonance spectroscopy (SPR). The deposition of P(TEM‐co‐MA)/P4VPCBZ as multilayer self‐assembled ultrathin films regularly grow which showed linear growth of absorbance and thickness with increasing the number of layer pair. Cross‐linking of the layers was verified by cyclic voltammetry (CV), UV–Vis spectrophotometry and electrochemical surface plasmon resonance (EC‐SPR) spectroscopy with good electro‐copolymerizability. This was verified by spectroelectrochemistry. The SPR angular‐reflectivity measurement resulted in shifts to a higher reflectivity according to the change in the dielectric constant of the electropolymerized film. Copyright © 2011 John Wiley & Sons, Ltd.     

On‐Chip Tailorability of Capacitive Gas Sensors Integrated with Metal–Organic Framework Films

Gas sensing technologies for smart cities require miniaturization, cost‐effectiveness, low power consumption, and outstanding sensitivity and selectivity. On‐chip, tailorable capacitive sensors integrated with metal–organic framework (MOF) films are presented, in which abundant coordinatively unsaturated metal sites are available for gas detection. The in situ growth of homogeneous Mg‐MOF‐74 films is realized with an appropriate metal‐to‐ligand ratio. The resultant sensors exhibit selective detection for benzene vapor and carbon dioxide (CO₂) at room temperature. Postsynthetic modification of Mg‐MOF‐74 films with ethylenediamine decreases sensitivity toward benzene but increases selectivity to CO₂. The reduced porosity and blocked open metal sites caused by amine coordination account for a deterioration in the sensing performance for benzene (by ca. 60 %). The enhanced sensitivity for CO₂ (by ca. 25 %) stems from a tailored amine–CO₂ interaction. This study demonstrates the feasibility of tuning gas sensing properties by adjusting MOF–analyte interactions, thereby offering new perspectives for the development of MOF‐based sensors.     

Spin Self‐Assembled Clay Nanocomposite Passivation Layers Made from a Photocrosslinkable Poly(vinyl alcohol) and Na+‐Montmorillonite Enhance the Environmental Stability of Organic Thin‐Film Transistors

We investigated the effects of the multilayer polymer‐clay nanohybrid passivation films on the stability of pentacene organic thin‐film transistors (OTFTs) exposed to air and UV irradiation. Well‐ordered multilayer films were deposited by the spin‐assisted layer‐by‐layer assembly method using photocrosslinkable poly(vinyl alcohol) with the N‐methyl‐4(4′‐formylstyryl)pyridinium methosulfate acetal group (SbQ‐PVA) and Na⁺‐montmorillonite in a water‐based solution process. When photocrosslinked, these SbQ‐PVA/clay multilayers were found to serve as excellent barriers to O₂ and UV‐light. Moreover, when used as passivation layers, they enhanced the stability of pentacene OTFT devices exposed to air and UV radiation.     

Mechanical property and corrosion resistance of zirconia/polydopamine nanocomposite multilayer films fabricated via a novel non‐electrostatic layer‐by‐layer assembly technique

Zirconia/polydopamine (ZrO₂/PDA) nanocomposite multilayer films were constructed on Si substrate via a novel nonelectrostatic layer‐by‐layer (NELBL) assembly technique. The building block of this technique is the newly reported dopamine molecule, which can be attached to almost all material surfaces and undergo oxidation‐polymerization to form PDA layers; more importantly, the outer hydroxyl groups of the PDA layer can chelated with certain inorganic oxide nanoparticles to generate oxide films. Thus, ZrO₂/PDA nanocomposite multilayer films were fabricated by sequential NELBL deposition of PDA and ZrO₂ nanoparticles. The formation of the ZrO₂/PDA nanocomposite multilayer films was monitored by the water contact angle (WCA) and ellipsometric thickness measurements, while the microstructure of the fabricated films was analyzed by means of atomic force microscope (AFM), field emission scanning electron microscope (FESEM), X‐ray photoelectron spectrum (XPS), and X‐ray diffraction (XRD) analysis. The mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers were found to be greatly enhanced as compared with that of the annealed homogeneous ZrO₂ film. The better mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers than the annealed homogeneous ZrO₂ film may be closely related to their special microstructure. Namely, the organic–inorganic hybrid microstructure of the annealed ZrO₂/PDA nanocomposite multilayers may largely account for the increased nanohardness and corrosion resistance. Copyright © 2010 John Wiley & Sons, Ltd.     

Thickness and annealing temperature effects on the optical properties and surface morphology of layer‐by‐layer poly(p‐phenyline vinylene)+dodecylbenzenesulfonate films

The fabrication of controlled molecular architectures is essential for organic devices, as is the case of emission of polarized light for the information industry. In this study, we show that optimized conditions can be established to allow layer‐by‐layer (LbL) films of poly(p‐phenylene vinylene) (PPV)+dodecylbenzenesulfonate (DBS) to be obtained with anisotropic properties. Films with five layers and converted at 110 °C had a dichroic ratio δ = 2.3 and order parameter r = 34%, as indicated in optical spectroscopy and emission ellipsometry data. This anisotropy was decreased with the number of layers deposited, with δ = 1.0 for a 75‐layer LbL PPV + DBS film. The analysis with atomic force microscopy showed the formation of polymer clusters in a random growth process with the normalized height distribution being represented by a Gaussian function. In spite of this randomness in film growth, the self‐covariance function pointed to a correlation between clusters, especially for thick films. In summary, the LbL method may be exploited to obtain both anisotropic films with polarized emission and regular, nanostructured surfaces. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Block Copolymer‐Templated Approach to Nanopatterned Metal–Organic Framework Films

The fabrication of patterned metal–organic framework (MOF) films with precisely controlled nanoscale resolution has been a fundamental challenge in nanoscience and nanotechnology. In this study, nanopatterned MOF films were fabricated using a layer‐by‐layer (LBL) growth method on functional templates (such as a bicontinuous nanoporous membrane or a structure with highly long‐range‐ordered nanoscopic channels parallel to the underlying substrate) generated by the microphase separation of polystyrene‐b ‐poly(2‐vinylpyridine) (PS‐b ‐P2VP) block copolymers. HKUST‐1 can be directly deposited on the templates without any chemical modification because the pyridine groups in P2VP interact with metal ions via metal‐BCP complexes. As a result, nanopatterned HKUST‐1 films with feature sizes below 50 nm and controllable thicknesses can be fabricated by controlling the number of LBL growth cycles. The proposed fabrication method further extends the applications of MOFs in various fields.     

Thermodynamics of the oxygen evolution electrocatalysis in a functionalized UiO‐66 metal‐organic frameworks

A density functional theory (DFT) approach was used to predict the thermodynamic energy barriers of the oxygen evolution reaction (OER) for three functionalized Metal‐organic Frameworks (MOFs). A UiO‐66(Zr) MOF design was selected for this study that incorporates three linker designs, a 1,4‐benzenedicarboxylate (BDC), BDC functionalized with an amino group (BDC + NH₂), and BDC functionalized with nitro group (BDC + NO₂). The study found several key differences between homogeneous planar catalyst thermodynamics and MOF‐based thermodynamics, the most significant being the non‐unique or heterogeneity of reaction sites. Additionally, the functionalization of the MOF was found to significantly influence the hydroperoxyl binding energy, which proves to be the largest hurdle for both oxide and MOF‐based catalyst. Both of these findings provide evidence that many of the limitations precluding planar homogeneous catalysts can be surpassed with a MOF‐based catalyst. The BDC + NH₂ proved to be the best performing catalyst with a predicted over‐potential for spontaneous OER evolution to be 3.03eV. © 2016 Wiley Periodicals, Inc.     

Atomically Dispersed Metal Sites in MOF‐Based Materials for Electrocatalytic and Photocatalytic Energy Conversion

Metal sites play an essential role in both electrocatalytic and photocatalytic energy conversion. The highly ordered arrangements of the organic linkers and metal nodes as well as the well‐defined pore structures of metal‐organic frameworks (MOFs) make them ideal substrates to support atomically dispersed metal sites (ADMSs) located in their metal nodes, linkers, and pores. Porous carbon materials doped with ADMSs can be derived from these ADMS‐incorporating MOF precursors through controlled treatments. These ADMSs incorporated in pristine MOFs and MOF‐derived carbon materials possess unique advantages over molecular or bulk metal‐based catalysts and bridge the gap between homogeneous and heterogeneous catalysts for energy‐conversion applications. This Review presents recent progress in the design and incorporation of ADMSs in MOFs and MOF‐derived materials for energy‐conversion applications.