Nature of the oxomolybdenum-thiolate pi-bond: implications for Mo-S bonding in sulfite oxidase and xanthine oxidase

The electronic structure of cis,trans-(L-N(2)S(2))MoO(X) (where L-N(2)S(2) = N,N'-dimethyl-N,N'-bis(2-mercaptophenyl)ethylenediamine and X = Cl, SCH(2)C(6)H(5), SC(6)H(4)-OCH(3), or SC(6)H(4)CF(3)) has been probed by electronic absorption, magnetic circular dichroism, and resonance Raman spectroscopies to determine the nature of oxomolybdenum-thiolate bonding in complexes possessing three equatorial sulfur ligands. One of the phenyl mercaptide sulfur donors of the tetradentate L-N(2)S(2) chelating ligand, denoted S(180), coordinates to molybdenum in the equatorial plane such that the OMo-S(180)-C(phenyl) dihedral angle is approximately 180 degrees, resulting in a highly covalent pi-bonding interaction between an S(180) p orbital and the molybdenum d(xy) orbital. This highly covalent bonding scheme is the origin of an intense low-energy S --> Mo d(xy) bonding-to-antibonding LMCT transition (E(max) approximately 16000 cm(-)(1), epsilon approximately 4000 M(-)(1) cm(-)(1)). Spectroscopically calibrated bonding calculations performed at the DFT level of theory reveal that S(180) contributes approximately 22% to the HOMO, which is predominantly a pi antibonding molecular orbital between Mo d(xy) and the S(180) p orbital oriented in the same plane. The second sulfur donor of the L-N(2)S(2) ligand is essentially nonbonding with Mo d(xy) due to an OMo-S-C(phenyl) dihedral angle of approximately 90 degrees. Because the formal Mo d(xy) orbital is the electroactive or redox orbital, these Mo d(xy)-S 3p interactions are important with respect to defining key covalency contributions to the reduction potential in monooxomolybdenum thiolates, including the one- and two-electron reduced forms of sulfite oxidase. Interestingly, the highly covalent Mo-S(180) pi bonding interaction observed in these complexes is analogous to the well-known Cu-S(Cys) pi bond in type 1 blue copper proteins, which display electronic absorption and resonance Raman spectra that are remarkably similar to these monooxomolybdenum thiolate complexes. Finally, the presence of a covalent Mo-S pi interaction oriented orthogonal to the MOO bond is discussed with respect to electron-transfer regeneration in sulfite oxidase and Mo=S(sulfido) bonding in xanthine oxidase.     

Chiral phosphane alkenes (PALs): simple synthesis, applications in catalysis, and functional hemilability

A simple synthesis of a chiral phosphane alkene (PAL) involves: 1) palladium-catalyzed Suzuki coupling of 10-bromo-5H-dibenzo[a,d]cyclohepten-5-ol (1) with phenylboronic acid to give quantitatively 10-phenyl-5H-dibenzo[a,d]cyclohepten-5-ol (2); 2) reaction of 2 with Ph(2)PCl under acidic conditions to give a racemic mixture of the phosphane oxide (10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane oxide ((Ph)troppo(Ph), 3), which is separated into enantiomers by using high-pressure liquid chromatography (HPLC) on a chiral column; 3) reduction with trichlorosilane to give the enantiomerically pure phosphanes (R)- and (S)-(10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane ((Ph)tropp(Ph), 4). This highly rigid, concave-shaped ligand serves as a bidentate ligand in Rh(I) and Ir(I) complexes. Catalysts prepared from [Rh(2)(mu(2)-Cl)(2)(C(2)H(4))(4)] and (S)-4 have allowed the efficient enantioselective 1,4-addition of arylboronic acids to alpha,beta-unsaturated carbonyls (Hayashi-Miyaura reaction) (5-0.1 mol % catalyst, up to 95% ee). The iridium complex (S,S)-[Ir((Ph)tropp(Ph))(2)]OTf ((S,S)-6; OTf=SO(3)CF(3)) has been used as a catalyst in the hydrogenation of various nonfunctionalized and functionalized olefins (turnover frequencies (TOFs) of up to 4000 h(-1)) and moderate enantiomeric excesses have been achieved (up to 67% ee). [Ir((Ph)tropp(Ph))(2)]OTf reversibly takes up three equivalents of H(2). The highly reactive octahedral [Ir(H)(2)(OTf)(CH(2)Cl(2))(H(2)-(Ph)tropp(Ph))(2)] could be isolated and contains two hydrogenated monodentate H(2)-(Ph)tropp(Ph) phosphanes, one CH(2)Cl(2) molecule, one triflate anion, and two hydrides. Based on this structure and extensive NMR spectroscopic studies, a mechanism for the hydrogenation reactions is proposed.     

Novel Mo(V)-dithiolene compounds: characterization of nonsymmetric dithiolene complexes by electrospray ionization mass spectrometry

Three new Mo(V) dithiolene compounds have been synthesized by addition of alkynes ((Me(3)Si)(2)C(2) (TMSA), (Me(3)Si)(2)C(4), and (Ph)(2)C(4) to MoO(2)S(2)(2-) in a MeOH/NH(3) mixture: [Mo(2)(O)(2)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)H(2))](2)(-) 1, [Mo(2)(O)(X)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)Ph(C(2)Ph))](2-) 2 (X = O or S), and [Mo(2)(O)(2)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)H(C(2)H))](2-) 3. The structure of 1 as determined by single-crystal X-ray diffraction study (space group Pbca, a = 13.3148(1) A, b = 15.7467(4) A, c = 28.4108(7) A, V = 5956.7(2) A(3)) is discussed. 2 and 3 have been identified by ESMS (electrospray mass spectrometry), (1)H NMR, (13)C NMR, and infrared spectroscopies. This investigation completes our previous study devoted to the addition of DPA (C(2)Ph(2)) to MoO(2)S(2)(2-) which led to [Mo(2)(O)(X)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)Ph(2))](2-) 4 (X = O or S). A reaction scheme is proposed to explain the formation of the different species present in solution. The reactivity of the remaining nucleophilic site of these complexes (eta(2)-S(2)) toward dicarbomethoxyacetylene (DMA) is also discussed.     

Stereochemical Nonrigidity and Geometrical Isomerism in Six-Coordinate Trigonal Prismatic Complexes: The Case of Asymmetric Molybdenum and Tungsten Tris(dithiolenes)

The isomerization of nine asymmetric tris(dithiolenes) of tungsten and molybdenum, of the general formula (R(1)R(2)C(2)S(2))(3)M is studied with NMR methods. In the complexes investigated, R(1) = H, R(2) = p-CH(3)OPh, p-CH(3)Ph, or Ph, and M = W or Mo, or R(1) = H, R(2) = p-ClPh or p-BrPh, and M = W, or R(1) = Ph, R(2) = p-CH(3)OPh, and M = W, as shown in formula I. The complexes are proved to be trigonal prismatic in solution and stereochemically nonrigid at room temperature. An equilibrium favoring the trans isomer (formula III) is established, with the concentration of this isomer being three times that of the cis due to entropy reasons. The kinetics and mechanism of the isomerization is investigated and a scheme is proposed involving the rotation of only one ligand around an axis lying on the dithiolenic ring, passing from the metal to the center of the carbon-carbon bond. This mechanism satisfies energy criteria and is allowed by symmetry selection rules, as theoretical EHMO calculations indicate.     

Electronic control of the "Bailar twist" in formally d0-d2 molybdenum tris(dithiolene) complexes: a sulfur K-edge X-ray absorption spectroscopy and density functional theory study

Sulfur K-edge X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations have been used to determine the electronic structures of a series of Mo tris(dithiolene) complexes, [Mo(mdt)3](z) (where mdt = 1,2-dimethylethene-1,2-dithiolate(2-) and z = 2-, 1-, 0), with near trigonal-prismatic geometries (D3h symmetry). These results show that the formally Mo(IV), Mo(V), and Mo(VI) complexes actually have a (dz(2))(2) configuration, that is, remain effectively Mo(IV) despite oxidation. Comparisons with the XAS data of another set of Mo tris(dithiolene) complexes, [Mo(tbbdt)3](z) (where tbbdt = 3,5-ditert-butylbenzene-1,2-dithiolate(2-) and z = 1-, 0), show that both neutral complexes, [Mo(mdt)3] and [Mo(tbbdt)3], have similar electronic structures while the monoanions do not. Calculations reveal that the "Bailar twist" present in the crystal structure of [Mo(tbbdt)3](1-) (D3 symmetry) but not [Mo(mdt)3](1-) (D3h symmetry) is controlled by electronic factors which arise from bonding differences between the mdt and tbbdt ligands. In the former, configuration interaction between the Mo d(z(2)) and a deeper energy, occupied ligand orbital, which occurs in D3 symmetry, destabilizes the Mo d(z(2)) to above another ligand orbital which is half-occupied in the D3h [Mo(mdt)3](1-) complex. This leads to a metal d(1) configuration with no ligand holes (i.e., d(1)[L3](0h)) for [Mo(tbbdt)3](1-) rather than the metal d(2) configuration with one ligand hole (i.e., d(2)[L3](1h)) for [Mo(mdt)3](1-). Thus, the Bailar twist observed in some metal tris(dithiolene) complexes is the result of configuration interaction between metal and ligand orbitals and can be probed experimentally by S K-edge XAS.     

Catalytic reduction of dinitrogen to ammonia by molybdenum: theory versus experiment

Molybdenum complexes that contain the triamidoamine ligand [(RNCH(2)CH(2))(3)N](3-) (R = 3,5-(2,4,6-iPr(3)C(6)H(2))(2)C(6)H(3)) catalyze the reduction of dinitrogen to ammonia at 22 degrees C and 1 atm with protons from 2,6-dimethylpyridinium and electrons from decamethylchromocene. Several theoretical studies have been published that bear on the proposed intermediates in the catalytic dinitrogen reduction reaction and their reaction characteristics, including DFT calculations on [(HIPTNCH(2)CH(2))(3)N]Mo species (HIPT =hexaisopropylterphenyl = 3,5-(2,4,6-iPr(3)C(6)H(2))(2)C(6)H(3)), which contain the actual triamidoamine ligand that is present in catalytic intermediates. Recent theoretical findings are compared with experimental findings for each proposed step in the catalytic reaction.     

Platinum complexes of naphthalene-1,8-dichalcogen and related polyaromatic hydrocarbon ligands

Platinum bisphosphine complexes bearing dichalcogen-derivatised naphthalene, acenaphthene or phenanthrene ligands have been prepared by either oxidative addition to zero-valent platinum species or from [PtCl(2)(PPhR(2))] (R=Ph or Me) and the disodium or dilithium salts of the parent disulfur, diselenide or mixed S/Se species. The parent naphthalene, acenaphthene and phenanthrene chalcogen compounds were treated with either [Pt(PPh(3))(4)] or [Pt(C(2)H(4))(PMe(3))(2)] (prepared in situ from [PtCl(2)(PMe(3))(2)], ethene and sodium naphthalide or super hydride [LiBEt(3)H]) to give the appropriate platinum(II) species. The dilithium salts of 1,8-E(2)-naphthalene (E=S or Se) prepared in situ by reduction of the E-E bond with [LiBEt(3)H] were treated with [PtCl(2)(PPh(3))(2)] to give [Pt(1,8-E(2)-nap)(PPh(3))(2)]. The tetraoxides [Pt(1,8-(S(O)(2))(2)-nap)(PR(3))(2)] (PR(3)=PPh(3) or PMe(2)Ph) were prepared in a similar metathetical manner from the appropriate [PtCl(2)(PR(3))] complexes and the disodium salt of naphthalene 1,8-disulfinic acid (1,8-(S(O)ONa)(2)-nap). The X-ray structures of selected examples reveal bidentate coordination with the naphthalene-E(2) unit hinged (111-137 degrees) with respect to the coordination plane. The naphthalene ring suffers significant distortion from planarity.     

Synthesis and coordination properties of new bis(phosphinomethyl)pyridine N,P,P'-trioxides

In a search for more hydrocarbon solvent soluble derivatives of the parent ligand, 2,6-[Ph(2)P(O)CH(2)](2)C(5)H(3)NO (1a), a series of new ligands, 2,6-[R(2)P(O)CH(2)](2)C(5)H(3)NO [R = Bz (1b); Tol (1c); Et (1d); Pr (1e); Bu (1f); Pn (1g); Hx (1h); Hp (1i); and Oct (1j)] and 2,6-[RR'P(O)CH(2)](2)C(5)H(3)NO [R = Ph, R' = Bz (2a); R = Ph, R' = Me (2b); R = Ph, R' = Hx (2c); R = Ph, R' = Oct (2d)], have been prepared by either Arbusov or Grignard substitutions on 2,6-bis(chloromethyl)pyridine followed by N-oxidation. The new ligands have been characterized by spectroscopic methods, and their coordination chemistry with selected lanthanide ions has been surveyed. Several 1:1 and 2:1 ligand/metal complexes have been isolated, and single-crystal X-ray diffraction analyses for Nd(2a)(NO(3))(3), Er(2a)(NO(3))(3), Yb(1d)(NO(3))(3), and [Nd(1c)(2)](NO(3))(3) are described. The new structural data are discussed in relation to the structures of complexes formed by 1a.     

First X-ray characterization and theoretical study of pi-alkyne,alkynyl-hydride,and vinylidene isomers for the same transition metal fragment [Cp*Ru(PEt3)2]+

The reaction of the chloro-complex [CpRuCl(PEt(3))(2)] with acetylene gas in methanol gave the pi-alkyne complex [CpRu(eta(2)-HCtbd1;CH)(PEt(3))(2)][BPh(4)] (1), which has been structurally characterized by X-ray analysis. The alkyne complex undergoes spontaneous isomerization even at low temperature, yielding the metastable alkynyl-hydride complex [CpRu(H)(Ctbd1;CH)(PEt(3))(2)][BPh(4)] (2), as the result of the oxidative addition of the alkyne C-H bond. This compound has also been structurally characterized despite it tautomerizes spontaneously into the stable primary vinylidene [CpRu(=C=CH(2))(PEt(3))(2)][BPh(4)] (3). This species has been alternatively prepared by a two-step deprotonation/protonation synthesis from the pi-alkyne complex. Moreover, the reaction of the initial chloro-complex with monosubstituted alkynes HCtbd1;CR (R = SiMe(3), Ph, COOMe, (t)Bu) has been studied without detection of pi-alkyne intermediates. Instead of this, alkynyl-hydride complexes were obtained in good yields. They also rearrange to the corresponding substituted vinylidenes. In the case of R = SiMe(3), the isomerization takes place followed by desilylation, yielding the primary vinylidene complex. X-ray crystal structures of the vinylidene complexes [CpRu(=C=CH(2))(PEt(3))(2)][BPh(4)] (3) and [CpRu(=C=CHCOOMe)(PEt(3))(2)][BPh(4)] (10) have also been determined. Both, full ab initio and quantum mechanics/molecular mechanics (QM/MM) calculations were carried out, respectively, on the model system [CpRu(C(2)H(2))(PH(3))(2)](+) (A) and the real complex [CpRu(C(2)H(2))(PEt(3))(2)](+) (B) to analyze the steric and electronic influence of ligands on the structures and relative energies of the three C(2)H(2) isomers. QM/MM calculations have been employed to evaluate the role of the steric effects of real ligands, whereas full ab initio energy calculations on the optimized QM/MM model have allowed recovering the electronic effects of ligands. Additional pure quantum mechanics calculations on [CpRu(C(2)H(2))(PH(3))(2)](+) (C) and [CpRu(C(2)H(2))(PMe(3))(2)](+) (D) model systems have been performed to analyze in more detail the effects of different ligands. Calculations have shown that the steric effects induced by the presence of bulky substituents in phosphine ligand are responsible for experimentally observed alkyne distortion and for relative destabilization of the alkyne isomer. Moreover, increasing the phosphine basicity and sigma donor capabilities of ligands causes a relative stabilization of an alkynyl-hydride isomer. The combination of both steric and electronic effects, makes alkyne and alkynyl-hydride isomers to be close in energy, leading to the isolation of both complexes.     

Does back-bonding involve bonding orbitals in boryl complexes? A theoretical DFT study

Theoretical calculations at the DFT (B3LYP) level have been undertaken on tris- and bis(boryl) complexes. Two model d(6) complexes [Rh(PH(3))(3)(BX(2))(3) and Rh(PH(3))(4)(BX(2))(2)(+), X = OH and H] have been studied. In the model tris(boryl) complex (X = OH) we find a fac structure as a minimum, in accordance with the experimental data. The mer geometries are found to be higher in energy. Analysis of the energetic ordering in mer isomers shows that back-bonding in these complexes involves a bonding Rh-B orbital (and not a d-block orbital as usual). This surprising behavior is rationalized through a qualitative MO analysis and quantitative NBO analysis. Results on the bis(boryl) complex confirm the preceding analysis. Full optimization of unsubstituted (X = H) complexes leads to structures in which the BH(2) moieties are coupled. In the optimal geometry of the bis(boryl) complex, the B(2)H(4) ligand resembles the transition state of the C(2v)-->D(2d) interconversion of the isolated B(2)H(4) species. In the tris(boryl) complex, we find a B(3)H(6) ligand in which the B(3) atoms define an isosceles triangle with one hydrogen bridging the shorter B-B bond.     

What is the best bonding model of the (σ-H-BR) species bound to a transition metal? Bonding analysis in complexes [(H)2Cl(PMe3)2M(σ-H-BR)] (M = Fe, Ru, Os)

Density Functional Theory calculations have been performed for the σ-hydroboryl complexes of iron, ruthenium and osmium [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] (M = Fe, Ru, Os; R = OMe, NMe(2), Ph) at the BP86/TZ2P/ZORA level of theory in order to understand the interactions between metal and HBR ligands. The calculated geometries of the complexes [(H)(2)Cl(PMe(3))(2)Ru(HBNMe(2))], [(H)(2)Cl(PMe(3))(2)Os(HBR)] (R = OMe, NMe(2)) are in excellent agreement with structurally characterized complexes [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))], [(H)(2)Cl(P(i)Pr(3))(2)Os{σ-H-BOCH(2)CH(2)OB(O(2)CH(2)CH(2))}] and [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))]. The longer calculated M-B bond distance in complex [(H)(2)Cl(PMe(3))(2)M(σ-H-BNMe(2))] are due to greater B-N π bonding and as a result, a weaker M-B π-back-bonding. The B-H2 bond distances reveal that (i) iron complexes contain bis(σ-borane) ligand, (ii) ruthenium complexes contain (σ-H-BR) ligands with a stretched B-H2 bond, and (iii) osmium complexes contain hydride (H2) and (σ-H-BR) ligands. The H-BR ligands in osmium complexes are a better trans-directing ligand than the Cl ligand. Values of interaction energy, electrostatic interaction, orbital interaction, and bond dissociation energy for interactions between ionic fragments are very large and may not be consistent with M-(σ-H-BR) bonding. The EDA as well as NBO and AIM analysis suggest that the best bonding model for the M-σ-H-BR interactions in the complexes [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] is the interaction between neutral fragments [(H)(2)Cl(PMe(3))(2)M] and [σ-H-BR]. This becomes evident from the calculated values for the orbital interactions. The electron configuration of the fragments which is shown for C in Fig. 1 experiences the smallest change upon the M-σ-H-BR bond formation. Since model C also requires the least amount of electronic excitation and geometry changes of all models given by the ΔE(prep) values, it is clearly the most appropriate choice of interacting fragments. The π-bonding contribution is 14-22% of the total orbital contribution.     

Reactivity of Mo(PMe3)6 towards benzothiophene and selenophenes: new pathways relevant to hydrodesulfurization

Mo(PMe(3))(6) cleaves a C-S bond of benzothiophene to give (kappa(2)-CHCHC(6)H(4)S)Mo(PMe(3))(4), which rapidly isomerizes to the olefin-thiophenolate and 1-metallacyclopropene-thiophenolate complexes, (kappa(1),eta(2)-CH(2)CHC(6)H(4)S)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)) and (kappa(1),eta(2)-CH(2)CC(6)H(4)S)Mo(PMe(3))(4). The latter two molecules result from a series of hydrogen transfers and are differentiated according to whether the termini of the organic fragments coordinate as olefin or eta(2)-vinyl ligands, respectively. The reactions between Mo(PMe(3))(6) and selenophenes proceed differently from those of the corresponding thiophenes. For example, whereas Mo(PMe(3))(6) reacts with thiophene to give eta(5)-thiophene and butadiene-thiolate complexes, (eta(5)-C(4)H(4)S)Mo(PMe(3))(3) and (eta(5)-C(4)H(5)S)Mo(PMe(3))(2)(eta(2)-CH(2)PMe(2)), selenophene affords the metallacyclopentadiene complex [(kappa(2)-C(4)H(4))Mo(PMe(3))(3)(Se)](2)[Mo(PMe(3))(4)] in which the selenium has been completely abstracted from the selenophene moiety. Likewise, in addition to (kappa(1),eta(2)-CH(2)CC(6)H(4)Se)Mo(PMe(3))(4) and (kappa(1),eta(2)-CH(2)CHC(6)H(4)Se)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)), which are counterparts of the species observed in the benzothiophene reaction, the reaction of Mo(PMe(3))(6) with benzoselenophene yields products resulting from C-C coupling, namely [kappa(2),eta(4)-Se(C(6)H(4))(CH)(4)(C(6)H(4))Se]Mo(PMe(3))(2) and [mu-Se(C(6)H(4))(CH)C(CH)(2)(C(6)H(4))](mu-Se)[Mo(PMe(3))(2)][Mo(PMe(3))(2)H].     

Electronic spectral studies of molybdenyl complexes. 2. MCD spectroscopy of [MoOS4]- centers

Magnetic circular dichroism (MCD) and absorption spectroscopies have been used to probe the electronic structure of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] complexes (edt = ethane-1,2-dithiolate). The results of density functional calculations (DFT) on [MoO(SMe)4]- and [MoO(edt)2]- model complexes were used to provide a framework for the interpretation of the spectra. Our analysis shows that the lowest energy transitions in [MoVOS4] chromophores (S4 = sulfur donor ligand) result from S-->Mo charge transfer transitions from S valence orbitals that lie close to the ligand field manifold. The energies of these transitions are strongly dependent on the orientation of the S lone-pair orbitals with respect to the Mo atom that is determined by the geometry of the ligand backbone. Thus, the lowest energy transition in the MCD spectrum of [PPh4][MoO(p-SC6H4X)4] (X = H) occurs at 14,800 cm-1, while that in [PPh4][MoO(edt)2] occurs at 11,900 cm-1. The identification of three bands in the absorption spectrum of [PPh4][MoO(edt)2] arising from LMCT from S pseudo-sigma combinations to the singly occupied Mo 4d orbital in the xy plane suggests that there is considerable covalency in the ground-state electronic structures of [MoOS4] complexes. DFT calculations on [MoO(SMe)4]- reveal that the singly occupied HOMO is 53% Mo 4dxy and 35% S p for the equilibrium C4 geometry. For [MoO(edt)2]- the steric constraints imposed by the edt ligands result in the S pi orbitals being of similar energy to the Mo 4d manifold. Significant S pseudo-sigma and pi donation may also weaken the Mo identical to O bond in [MoOS4] centers, a requirement for facile active site regeneration in the catalytic cycle of the DMSO reductases. The strong dependence of the energies of the bands in the absorption and MCD spectra of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] on the ligand geometry suggests that the structural features of the active sites of the DMSO reductases may result in an electronic structure that is optimized for facile oxygen atom transfer.     

Synthesis and structural characterization of M(PMe3)3(O2CR)2(OH2)H2 (M = Mo, W): aqua-hydride complexes of molybdenum and tungsten

Mo(PMe(3))(6) and W(PMe(3))(4)(eta(2)-CH(2)PMe(2))H undergo oxidative addition of the O-H bond of RCO(2)H to yield sequentially M(PMe(3))(4)(eta(2)-O(2)CR)H and M(PMe(3))(3)(eta(2)-O(2)CR)(eta(1)-O(2)CR)H(2) (M = Mo and R = Ph, Bu(t); M = W and R = Bu(t)). One of the oxygen donors of the bidentate carboxylate ligand may be displaced by H(2)O to give rare examples of aqua-dihydride complexes, M(PMe(3))(3)(eta(1)-O(2)CR)(2)(OH(2))H(2), in which the coordinated water molecule is hydrogen-bonded to both carboxylate ligands.     

Bis(dithiolene)molybdenum analogues relevant to the DMSO reductase enzyme family: synthesis, structures, and oxygen atom transfer reactions and kinetics.

A series of dithiolene complexes of the general type [Mo(IV)(QR')(S(2)C(2)Me(2))(2)](1)(-) has been prepared and structurally characterized as possible structural and reactivity analogues of reduced sites of the enzymes DMSOR and TMAOR (QR' = PhO(-), 2-AdO(-), Pr(i)()O(-)), dissimilatory nitrate reductase (QR' = 2-AdS(-)), and formate dehydrogenase (QR' = 2-AdSe(-)). The complexes are square pyramidal with the molybdenum atom positioned 0.74-0.80 A above the S(4) mean plane toward axial ligand QR'. In part on the basis of a recent clarification of the active site of oxidized Rhodobacter sphaeroides DMSOR (Li, H.-K.; Temple, C.; Rajagopalan, K. V.; Schindelin, H. J. Am. Chem. Soc. 2000, 122, 7673), we have adopted the minimal reaction paradigm Mo(IV) + XO right arrow over left arrow Mo(VI)O + X involving desoxo Mo(IV), monooxo Mo(VI), and substrate/product XO/X for direct oxygen atom transfer of DMSOR and TMAOR enzymes. The [Mo(OR')(S(2)C(2)Me(2))(2)](1)(-) species carry dithiolene and anionic oxygen ligands intended to simulate cofactor ligand and serinate binding in DMSOR and TMAOR catalytic sites. In systems with N-oxide and S-oxide substrates, the observed overall reaction sequence is [Mo(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-) + XO --> [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-) --> [Mo(V)O(S(2)C(2)Me(2))(2)](1)(-). Direct oxo transfer in the first step has been proven by isotope labeling. The reactivity of [Mo(OPh)(S(2)C(2)Me(2))(2)](1)(-) (1) has been the most extensively studied. In second-order reactions, 1 reduces DMSO and (CH(2))(4)SO (k(2) approximately 10(-)(6), 10(-)(4) M(-)(1) s(-)(1); DeltaS(double dagger) = -36, -39 eu) and Me(3)NO (k(2) = 200 M(-)(1) s(-)(1); DeltaS(double dagger) = -21 eu) in acetonitrile at 298 K. Activation entropies indicate an associative transition state, which from relative rates and substrate properties is inferred to be concerted with X-O bond weakening and Mo-O bond making. The Mo(VI)O product in the first step, such as [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), is an intermediate in the overall reaction sequence, inasmuch as it is too unstable to isolate and decays by an internal redox process to a Mo(V)O product, liberating an equimolar quantity of phenol. This research affords the first analogue reaction systems of biological N-oxide and S-oxide substrates that are based on desoxo Mo(IV) complexes with biologically relevant coordination. Oxo-transfer reactions in analogue systems are substantially slower than enzyme systems based on a k(cat)/K(M) criterion. An interpretation of this behavior requires more information on the rate-limiting step(s) in enzyme catalytic cycles. (2-Ad = 2-adamantyl, DMSOR = dimethyl sulfoxide reductase, TMAOR = trimethylamine N-oxide reductase)     

Synthesis, characterization, and reactivity of Fe complexes containing cyclic diazadiphosphine ligands: the role of the pendant base in heterolytic cleavage of H2

The iron complexes CpFe(P(Ph)(2)N(Bn)(2))Cl (1-Cl), CpFe(P(Ph)(2)N(Ph)(2))Cl (2-Cl), and CpFe(P(Ph)(2)C(5))Cl (3-Cl)(where P(Ph)(2)N(Bn)(2) is 1,5-dibenzyl-1,5-diaza-3,7-diphenyl-3,7-diphosphacyclooctane, P(Ph)(2)N(Ph)(2) is 1,3,5,7-tetraphenyl-1,5-diaza-3,7-diphosphacyclooctane, and P(Ph)(2)C(5) is 1,4-diphenyl-1,4-diphosphacycloheptane) have been synthesized and characterized by NMR spectroscopy, electrochemical studies, and X-ray diffraction. These chloride derivatives are readily converted to the corresponding hydride complexes [CpFe(P(Ph)(2)N(Bn)(2))H (1-H), CpFe(P(Ph)(2)N(Ph)(2))H (2-H), CpFe(P(Ph)(2)C(5))H (3-H)] and H(2) complexes [CpFe(P(Ph)(2)N(Bn)(2))(H(2))]BAr(F)(4), [1-H(2)]BAr(F)(4), (where BAr(F)(4) is B[(3,5-(CF(3))(2)C(6)H(3))(4)](-)), [CpFe(P(Ph)(2)N(Ph)(2))(H(2))]BAr(F)(4), [2-H(2)]BAr(F)(4), and [CpFe(P(Ph)(2)C(5))(H(2))]BAr(F)(4), [3-H(2)]BAr(F)(4), as well as [CpFe(P(Ph)(2)N(Bn)(2))(CO)]BAr(F)(4), [1-CO]Cl. Structural studies are reported for [1-H(2)]BAr(F)(4), 1-H, 2-H, and [1-CO]Cl. The conformations adopted by the chelate rings of the P(Ph)(2)N(Bn)(2) ligand in the different complexes are determined by attractive or repulsive interactions between the sixth ligand of these pseudo-octahedral complexes and the pendant N atom of the ring adjacent to the sixth ligand. An example of an attractive interaction is the observation that the distance between the N atom of the pendant amine and the C atom of the coordinated CO ligand for [1-CO]BAr(F)(4) is 2.848 ?, considerably shorter than the sum of the van der Waals radii of N and C atoms. Studies of H/D exchange by the complexes [1-H(2)](+), [2-H(2)](+), and [3-H(2)](+) carried out using H(2) and D(2) indicate that the relatively rapid H/D exchange observed for [1-H(2)](+) and [2-H(2)](+) compared to [3-H(2)](+) is consistent with intramolecular heterolytic cleavage of H(2) mediated by the pendant amine. Computational studies indicate a low barrier for heterolytic cleavage of H(2). These mononuclear Fe(II) dihydrogen complexes containing pendant amines in the ligands mimic crucial features of the distal Fe site of the active site of the [FeFe]-hydrogenase required for H-H bond formation and cleavage.     

Sulfur K-edge X-ray Absorption Spectroscopy and Time-Dependent Density Functional Theory of Dithiophosphinate Extractants: Minor Actinide Selectivity and Electronic Structure Correlations

The dithiophosphinic acid HS(2)P(o-CF(3)C(6)H(4))(2) is known to exhibit exceptionally high extraction selectivities for trivalent minor actinides (Am and Cm) in the presence of trivalent lanthanides. To generate insight that may account for this observation, a series of [PPh(4)][S(2)PR(2)] complexes, where R = Me (1), Ph (2), p-CF(3)C(6)H(4) (3), m-CF(3)C(6)H(4) (4), o-CF(3)C(6)H(4) (5), o-MeC(6)H(4) (6), and o-MeOC(6)H(4) (7), have been investigated using sulfur K-edge X-ray absorption spectroscopy (XAS) and time-dependent density functional theory (TDDFT). The experimental analyses show distinct features in the spectrum of S(2)P(o-CF(3)C(6)H(4))(2)(-) (5) that are not present in the spectrum of 4, whose conjugate acid exhibits reduced selectivity, or in the spectra of 2 and 3, which are anticipated to have even lower separation factors based on previous studies. In contrast, the spectrum of 5 is similar to those of 6 and 7, despite the significantly different electron-donating properties associated with the o-CF(3), o-Me, and o-OMe substituents. The TDDFT calculations suggest that the distinct spectral features of 5-7 result from steric interactions due to the presence of the ortho substituents, which force the aryl groups to rotate around the P-C bonds and reduce the molecular symmetry from approximately C(2v) in 2-4 to C(2) in 5-7. As a consequence, the change in aryl group orientation appears to make the ortho-substituted S(2)PR(2)(-) anions "softer" extractants compared with analogous Ph-, p-CF(3)C(6)H(4)-, and m-CF(3)C(6)H(4)-containing ligands (2-4) by raising the energies of the sulfur valence orbitals and enhancing orbital mixing between the S(2)P molecular orbitals and the aryl groups bound to phosphorus. Overall, we report that sulfur K-edge XAS experiments and TDDFT calculations reveal unique electronic properties of the S(2)P(o-CF(3)C(6)H(4))(2)(-) anion in 5. These results correlate with the special extraction properties associated with HS(2)P(o-CF(3)C(6)H(4))(2), and suggest that ligand K-edge XAS and TDDFT can be used to guide separation efforts relevant to advanced fuel cycle development.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Phosphine-substituted dithiolene complexes as ligands: communication between ruthenium(II) centers through a dimolybdenum bis(dithiolene) core

The reaction of Mo2(SCH2CH2S)2Cp2 (1; Cp=eta-C5H5) with an excess of an alkyne in refluxing dichloromethane affords the bis(dithiolene) complexes Mo2(micro-SCR1=CR2S)2Cp2 (2a, R1=R2=CO2Me; 2b, R1=R2=Ph; 2c, R1=H, R2=CO2Me) whereas with 1 equiv of alkyne at room temperature the mixed dithiolene-dithiolate species Mo2(micro-SCR1=CR2S)(micro-SCH2CH2S)Cp2 (3a, R1=R2=CO2Me; 3b, R1=R2=Ph) are formed. The remaining dithiolate ligand in 3 can then be converted into a different dithiolene by reaction with a second alkyne. Applying this methodology, we have used bis(diphenylphosphino)acetylene to prepare the first examples of complexes containing phosphine-substituted dithiolene ligands: Mo2{micro-SC(CO2Me)=C(CO2Me)S}{micro-SC(PPh2)=C(PPh2)S}Cp2 (2g) and Mo2{micro-SC(PPh2)=C(PPh2)S}2Cp2 (2h). Tri- and tetrametallic complexes can then be assembled by coordination of these diphosphines to CpRuCl units by reaction with CpRu(PPh3)2Cl. Electrochemical studies of the Ru(II)/Ru(III) couple in Mo2{micro-SC(PPh2)=C(PPh2)S}2Cp2(RuClCp)2 (4b) reveals that the two separate ruthenium centers are oxidized electrochemically at different potentials, demonstrating communication between them through the dimolybdenum bis(dithiolene) core. Density functional theory calculations were carried out to explore the electronic structures of these species and to predict and assign their electronic spectra.