Molecular switching complexes with iron and tin as central atom

The precursor [Fe^III(L)Cl] (LH₂ = N,N′-bis(2′-hydroxy-benzyliden)-1,6-diamino-3-N-hexane is a high-spin (S = 5/2) complex. This precursor is combined with the bridging units [Sn^IV(X)₄] (X = CN^?, NCS^?) to yield star-shaped pentanuclear clusters, [(LFe^III–X)₄Sn]Cl₄. For X = CN^? the ⁵⁷Fe-Mössbauer data show a multiple spin transition between iron(III) in the high-spin and low-spin state, while the ^119mSn-Mössbauer data indicate a valence tautomerism between Sn(IV) and Sn(II). Changing the bridging unit from X = CN^? to X = NCS^? turns the switchability off.     

Crystal structure of Pb2SbS2I3, and re-examination of the crystal chemistry within the group of (Pb/Sn/Sb) chalcogeno-iodides

The crystal structure of Pb₂SbS₂I₃ was solved at room temperature and 100 K. At 293 K it crystallizes in the orthorhombic system, space group Cmcm (No. 63), with unit cell parameters a = 4.3262(9), b = 14.181(3), c = 16.556(3) Å, V = 1017.7(4) Å³, Z = 4. The structure is disordered, and combines a split Pb site (s.o.f. = 0.50) with one mixed (Pb,Sb) site with Pb and Sb in two distinct sub-positions. At 100 K, it is monoclinic, space group P2₁/c, with unit cell parameters a = 7.3629(6), b = 16.466(3), c = 8.5939(7) Å, β = 107.14(2)°, V = 995.6(2) Å³, Z = 4. The structure is now fully ordered, without mixed sites. On the basis of bond valence calculations, new cation distributions are proposed for published structures of the Sn isotypes, Sn₂SbS₂I₃ and Sn₂SbSe₂I₃. A re-examination of the crystal structures of various (Pb/Sn/Sb) chalcogeno-iodides is presented according to modular analysis. All these structures can be described according to three types of 1D modules, (Pb/Sn)I₄, (Sn)₂I₄ and (Pb/Sn/Sb)₄(S/Se)₂I₄. Generally each type of 1D module gives one type of slab, and the final structure corresponds to a specific stacking of two or three among these slabs. A new structural model is proposed for “α-Sn₂SI₂”, which would have the non-stoichiometric composition (Sn_5.42□_0.58)S₂(I_6.87□_0.12), ideally Sn₂₇S₁₀I₃₄, with probably a narrow solid solution field on the SnS–SnI₂ joint.     

Anionic redox chemistry in Na-rich Na2Ru1 − ySnyO3 positive electrode material for Na-ion batteries

The synthesis and Na- electrochemical activity of Na-rich layered Na₂Ru_1−ySn_yO₃ compounds is reported. Like their Li-analogue, Na₂Ru_1−ySn_yO₃ shows capacities that exceed theoretical capacity calculated from the cationic redox species. The high capacity was found, by means of XPS analysis, to be associated to the accumulation of both cationic (Ru^4 +/Ru^5 +) and anionic (O^2 −/O₂^n −) redox processes. The structural evolutions during cycling have been followed and found to be associated with the cation disordering and loss of crystallinity on cycling.     

Enthalpies of mixing of liquid systems for lead free soldering: Al-Cu-Sn system

The present work refers to high-temperature drop calorimetric measurements on liquid Al–Cu, Al–Sn, and Al–Cu–Sn alloys. The binary systems have been investigated at 973 K, up to 40 at.% Cu in case of Al–Cu, and over the entire concentrational range in case of Al–Sn. Measurements in the ternary Al–Cu–Sn system were performed along the following cross-sections: x_Al/x_Cu = 1:1, x_Al/x_Sn = 1:1, x_Cu/x_Sn = 7:3, x_Cu/x_Sn = 1:1, and x_Cu/x_Sn = 3:7 at 1273 K. Experimental data were used to find ternary interaction parameters by applying the Redlich–Kister–Muggianu model for substitutional solutions, and a full set of parameters describing the concentration dependence of the enthalpy of mixing was derived. From these, the isoenthalpy curves were constructed for 1273 K. The ternary system shows an exothermic enthalpy minimum of approx. ?18,000 J/mol in the Al–Cu binary and a maximum of approx. 4000 J/mol in the Al–Sn binary system. The Al–Cu–Sn system is characterized by considerable repulsive ternary interactions as shown by the positive ternary interaction parameters.     

Highly efficient In–Sn alloy catalysts for electrochemical reduction of CO2 to formate

Gas diffusion electrodes (GDEs), including GDE-In_0.90Sn_0.10, GDE-In_0.47Sn_0.53 and GDE-In_0.22Sn_0.78, were prepared by electrodeposition of In–Sn alloys on carbon fiber paper, and then used to explore the electroreduction of CO₂ to formate in aqueous solution. Compared with commercial indium or Sn foil catalysts, the GDE-In_0.90Sn_0.10 electrode in particular is shown to have excellent catalytic performance towards electroreduction of CO₂ to formate, with a high Faradaic efficiency (~ 92%). More importantly, the catalytic activity of GDE-In_0.90Sn_0.10 remained reasonably stable over a 22-hour period of electrolysis, and a relatively high electrolytic current density (15 mA cm^− 2) was obtained in an aqueous medium, demonstrating its potential for electrochemical reduction of CO₂ to formate.     

Fabrication and electrochemical properties of the Sn–Ni–P alloy rods array electrode for lithium-ion batteries

A new ternary Sn–Ni–P alloy rods array electrode for lithium-ion batteries is synthesized by electrodeposition with a Cu nanorods array structured foil as current collector. The Cu nanorods array foil is fabricated by heat treatment and electrochemical reduction of Cu(OH)₂ nanorods film, which is grown directly on Cu substrate through an oxidation method. The Sn–Ni–P alloy rods array electrode is mainly composed of pure Sn, Ni₃Sn₄ and Ni–P phases. The electrochemical experimental results illustrate that the Sn–Ni–P alloy rods array electrode has high reversible capacity and excellent coulombic efficiency, with an initial discharge capacity and charge capacity of 785.0 mAh g^?1 and 567.8 mAh g^?1, respectively. After the 100th discharge–charge cycling, capacity retention is 94.2% with a value of 534.8 mAh g^?1. The electrode also performs with an excellent rate capacity.     

High-pressure synthesis and characterization of the alkaline earth borate β-BaB4O7

The new orthorhombic barium borate β-BaB₄O₇ was synthesized under high-pressure/high-temperature conditions in a Walker-type multianvil apparatus at 7.5 GPa and 1100 °C, starting from stoichiometric mixtures of the binary oxides. β-BaB₄O₇ crystallizes in space group Pmnb with Z = 2 and lattice parameters a = 1099.4(2), b = 901.7(2), c = 430.73(9) pm, R1 = 0.0199, and wR2 = 0.0406 (all data). The network-structure is built up exclusively from BO₄-tetrahedra, linked via common corners. Its structural differences to the ambient-pressure phase α-BaB₄O₇ and structural agreements with the isotypic high-pressure phases β-MB₄O₇ (M = Ca, Hg, Sn) and the ambient-pressure phases MB₄O₇ (M = Sr, Pb, Eu) are discussed. β-BaB₄O₇ and a hypothetical BaB₄O₇ in the β-MB₄O₇ (M = Ca, Hg, Sn) structure were studied as high-pressure phases of α-BaB₄O₇, using density functional calculations. The transition pressure of α-BaB₄O₇ into the structure of β-BaB₄O₇ was calculated to 1.5 GPa; the transition pressure of β-BaB₄O₇ into BaB₄O₇ in the β-MB₄O₇ (M = Ca, Hg, Sn) structure to 7.5 GPa.     

Synthesis and properties of PdSn/Al2O3 and PdSn/SiO2 prepared by solvated metal atom dispersed method

A series of solvated metal atom dispersion (SMAD) catalysts: Pd/SiO₂, Pd/Al₂O₃, Sn/SiO₂, Sn/Al₂O₃, Pd_xSn_y/SiO₂ and Pd_xSn_y/Al₂O₃. It was prepared by simultaneous evaporation of Pd and Sn. The metals were co-deposited at 77 K using acetone, 2-propanol and THF to produce colloids “in situ” all the supported catalyst were characterized by chemisorption, transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and TPR. This series of catalyst were tested for crotonaldehyde hydrogenation in gas phase to obtain crotyl alcohol.     

Synthesis and characterization of novel intramolecularly O,C,O-coordinated heteroleptic organostannylenes and their tungstenpentacarbonyl complexes

The syntheses are reported of the novel heteroleptic organostannylenes [2,6-(ROCH₂)₂C₆H₃]SnCl (1, R = Me; 2, R = t-Bu) and of their tungstenpentacarbonyl complexes [2,6-(ROCH₂)₂C₆H₃](X)SnW(CO)₅ (3, X = Cl, R = Me; 4, X = Cl, R = t-Bu; 5, X = H, R = Me). The compounds were characterized by means of elemental analyses, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopies, electrospray mass spectrometry and in case of 3 and 4 also by single crystal X-ray diffraction analysis. For the two latter compounds the substituents bound at the ether oxygen atom control the strength of intramolecular O → Sn coordination. Thus, the O–Sn distances amount to 2.391(5)/2.389(5) (3) and 2.464(3)/2.513(3) Å (4).     

Heat capacities,third-law entropies and thermodynamic functions of the geometrically frustrated antiferromagnetic spinels GeCo2O4 and GeNi2O4 from T=(0 to 400) K

The molar heat capacities of GeCo₂O₄ and GeNi₂O₄, two geometrically frustrated spinels, have been measured in the temperature range from T=(0.5 to 400) K. Anomalies associated with magnetic ordering occur in the heat capacities of both compounds. The transition in GeCo₂O₄ occurs at T=20.6 K while two peaks are found in the heat capacity of GeNi₂O₄, both within the narrow temperature range between 11.4<(T/K)<12.2. Thermodynamic functions have been generated from smoothed fits of the experimental results. At T=298.15 K the standard molar heat capacities are (143.44 ± 0.14) J · K⁻¹ · mol⁻¹ for GeCo₂O₄ and (130.76 ± 0.13) J · K⁻¹ · mol⁻¹ for GeNi₂O₄. The standard molar entropies at T=298.15 K for GeCo₂O₄ and GeNi₂O₄ are (149.20 ± 0.60) J · K⁻¹ · mol⁻¹ and (131.80 ± 0.53) J · K⁻¹ · mol⁻¹ respectively. Above 100 K, the heat capacity of the cobalt compound is significantly higher than that of the nickel compound. The excess heat capacity can be reasonably modeled by the assumption of a Schottky contribution arising from the thermal excitation of electronic states associated with the CO²⁺ ion in a cubic crystal field. The splittings obtained, 230 cm⁻¹ for the four-fold-degenerate first excited state and 610 cm⁻¹ for the six-fold degenerate second excited state, are significantly lower than those observed in pure CoO.     

Solvothermal synthesis and crystal structure of the Mo(VI)-bridged helical chain containing Mo2(V) dimers: (C4H12N2)2[(MoV2O4)(MoVIO4)(C2O4)2]·2H2O

A new molybdenum complex (C₄H₁₂N₂)₂[(Mo^V₂O₄)(Mo^VIO₄)(C₂O₄)₂]·2H₂O, was solvothermally synthesized and characterized by single-crystal X-ray diffraction. The structure of the compound consists of oxalate acid-coordinated mixed-valent [Mo^V₂O₄][Mo^VIO₄] helical chains and protonated piperazine cations. The helical chains are built up from the [Mo^V₂O₄] units and [Mo^VIO₄] tetrahedral. The central axis about helical chain is a 2-fold screw axis. The compound crystallizes in the space group P2₁/n of monoclinic system with a = 11.396(2) Å, b = 14.107(3) Å, c = 15.805(3) Å, β = 102.09(3)°, V = 2484.6(9) Å³, Z = 4. Other characterizations by elemental analysis, IR, and thermal analysis for this compound are also given.     

The heat capacities and thermodynamic properties of NiAl2O4 and CoAl2O4 measured by adiabatic calorimetry from T = (4 to 400) K

The low-temperature heat capacity of NiAl₂O₄ and CoAl₂O₄ was measured between T = (4 and 400) K and thermodynamic functions were derived from the results. The measured heat-capacity curves show sharp anomalies peaking at around T = 7.5 K for NiAl₂O₄ and at T = 9 K for CoAl₂O₄. The exact cause of these anomalies is unknown. From our results, we suggest a standard entropy for NiAl₂O₄ at T = 298.15 K of (97.1 ± 0.2) J · mol^?1 · K^?1 and for CoAl₂O₄ of (100.3 ± 0.2) J · mol^?1 · K^?1.     

Reactivity of intramolecularly coordinated aluminum compounds to R3EOH (E = Sn,Si). Remarkable migration of N,C,N and O,C,O pincer ligands

The reaction of organoaluminum compounds containing O,C,O or N,C,N chelating (so called pincer) ligands [2,6-(YCH₂)₂C₆H₃]AlⁱBu₂ (Y = MeO 1, ^tBuO 2, Me₂N 3) with R₃SnOH (R = Ph or Me) gives tetraorganotin complexes [2,6-(YCH₂)₂C₆H₃]SnR₃ (Y = MeO, R = Ph 4, Y = MeO, R = Me 5; Y = ^tBuO, R = Ph 6, Y = ^tBuO, R = Me 7; Y = Me₂N, R = Ph 8, Y = Me₂N, R = Me 9) as the result of migration of O,C,O or N,C,N pincer ligands from aluminum to tin atom. Reaction of 1 and 2 with (ⁿBu₃Sn)₂O proceeded in similar fashion resulting in 10 and 11 ([2,6-(YCH₂)₂C₆H₃]SnⁿBu₃, Y = MeO 10; Y = ^tBuO 11) in mixture with ⁿBu₃SnⁱBu. The reaction 1 and 3 with 2 equiv. of Ph₃SiOH followed another reaction path and ([2,6-(YCH₂)₂C₆H₃]Al(OSiPh₃)₂, Y = MeO 12, Me₂N 13) were observed as the products of alkane elimination. The organotin derivatives 4–11 were characterized by the help of elemental analysis, ESI-MS technique, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and in the case 6 and 8 by single crystal X-ray diffraction (XRD). Compounds 12 and 13 were identified using elemental analysis,¹H, ¹³C, ²⁹Si NMR and IR spectroscopy.     

Crystal structure and thermal analysis of the tetramethylammonium dichromate and trichromate

The structures of the tetramethylammonium dichromate, [(CH₃)₄N]₂Cr₂O₇ and trichromate, [(CH₃)₄N]₂Cr₃O₁₀, were determined from single-crystal X-ray diffraction data. These compounds crystallize in the orthorhombic system (space group Pnma, with Z=4 and a=17.192(1) Å, b=8.55(1) Å, c=10.637(1) Å), for the dichromate and in the monoclinic system (space group P2₁/n, with Z=4 and a=11.366(2) Å, b=8.493(2) Å, c=20.187(4) Å, β=103.98(3)° for the trichromate. The structures consist of discrete dichromate anions (Cr₂O₇)^2– or trichromate anions (Cr₃O₁₀)^2–, respectively, stabilized by quaternary ammonium [(CH₃)₄N]⁺. Phase transitions in [(CH₃)₄N]₂Cr₂O₇ have been evidenced by differential scanning calorimetry as well as a new allotropic variety of [(CH₃)₄N]₂Cr₂O₇ which was characterized by X-ray powder diffraction. It crystallizes in an orthorhombic system with the unit cell parameters a=24.49(1) Å, b=8.85(1) Å, c=8.705(8) Å.     

Design and synthesis of novel water-soluble amino acid derivatives of chlorin p6 ethers as photosensitizer

Eight new water-soluble amino acid derivatives of chlorin p₆ ethers 6a-h were designed and synthesized using purpurin-18 (2) as key intermediate. All target compounds exhibited better phototoxicity than talaporfin and the most phototoxic compound 6d showed IC₅₀ values of 0.20 μmol/L against A549 cell and 0.41 μmol/L against B16-F10 cell, which represented 31- and 24-fold increase of PDT antitumor efficacy compared to talaporfin.     

Thermodynamics of Cr2O3, FeCr2O4, ZnCr2O4, and CoCr2O4

High-temperature heat capacity measurements were obtained for Cr₂O₃, FeCr₂O₄, ZnCr₂O₄, and CoCr₂O₄ using a differential scanning calorimeter. These data were combined with previously available, overlapping heat capacity data at temperatures up to 400 K and fitted to 5-parameter Maier–Kelley C_p(T) equations. Expressions for molar entropy were then derived by suitable integration of the Maier–Kelley equations in combination with recent S^∘(298) evaluations. Finally, a database of high-temperature equilibrium measurements on the formation of these oxides was constructed and critically evaluated. Gibbs free energies of Cr₂O₃, FeCr₂O₄, and CoCr₂O₄ were referenced by averaging the most reliable results at reference temperatures of (1100, 1400, and 1373) K, respectively, while Gibbs free energies for ZnCr₂O₄ were referenced to the results of Jacob [K.T. Jacob, Thermochim. Acta 15 (1976) 79–87] at T = 1100 K. Thermodynamic extrapolations from the high-temperature reference points to T = 298.15 K by application of the heat capacity correlations gave Δ_fG^∘(298) = (−1049.96, −1339.40, −1428.35, and −1326.75) kJ · mol⁻¹ for Cr₂O₃, FeCr₂O₄, ZnCr₂O₄, and CoCr₂O₄, respectively.     

Synthesis,thermal behaviour and crystal structure of RbSrP3O9·3 H2O

Rubidium strontium cyclo-triphosphate trihydrate, RbSrP₃O₉·3 H₂O, was synthesized by reaction between cyclo-triphosphoric acid H₃P₃O₉ and rubidium and strontium carbonates. It crystallizes in the othorhombic system, space group Pnma, with a = 9.120(1) Å, b = 8.141(1) Å, c = 15.234(1) Å, V = 1 131.1(3) Å³, Z = 4. Crystal structure determination from single crystal data collected at 300 K shows that the P₃O₉ groups exhibit C_s symmetry and are not connected to each other. Rubidium (distorted octahedron) and strontium (distorted square antiprism) are coordinated by oxygen and water molecules yielding the formation of infinite chains interconnected to each other and to the P₃O₉ groups. The IR valence vibration bands of the P₃O₉ cycle have been identified in the domain 1 400–650 cm^–1 and related to the structural results. After water loss, the anhydrous phase crystallizes from an intermediate amorphous phase and further decomposes into Rb₂SrP₄O₁₂ and SrP₂O₆.     

New α,ω-dicarboxylate coordination polymers with 4,4′-bipyridine: Cu(bpy)(C5H6O4), Zn(bpy)(C5H6O4), Zn(bpy)(C6H8O4) and Mn(bpy)(C8H12O4) · H2O

Four 4,4′-bipyridine α,ω-dicarboxylate coordination polymers Cu(bpy)(C₅H₆O₄) (1), Zn(bpy)(C₅H₆O₄) (2), Zn(bpy)(C₆H₈O₄) (3) and Mn(bpy)(C₈H₁₂O₄) · H₂O (4) have been synthesized and structurally characterized by single crystal X-ray diffraction methods (bpy = 4,4-bipyridine, (C₅H₆O₄)²⁻ = glutarate anion, (C₆H₈O₄)²⁻ = adipate anion, (C₈H₁₂O₄)²⁻ = suberate anion). Their crystal structures are featured by dimeric metal units, which are co-bridged by 4,4′-bipyridine ligands and dicarboxylate anions such as glutarate, adipate and suberate anions to generate 2D layers with a (4,4) topology in 1, 2 and 4 as well as to form 3D frameworks in 3. Two 3D frameworks in 3 interpenetrate with each other to form a topology identical to the well-known Nb₆F₁₅ cluster compound. Over 5–300 K, the paramagnetic behavior of 4 follows the Curie–Weiss law χ_m(T − Θ) = 4.265(5) cm³ mol⁻¹ with the Weiss constant Θ = −6.3(2) K. Furthermore, the thermal behavior of 3 and 4 is also discussed.     

Synthesis,structure, and characterization of a new two-dimensional lead(II) vanadate,Ba3PbV4O14

A new two-dimensional lead(II) vanadate, Ba₃PbV₄O₁₄ has been synthesized by standard solid state techniques using BaCO₃, PbO, and V₂O₅ as reagents. The structure of Ba₃PbV₄O₁₄ was determined by single-crystal X-ray diffraction. Ba₃PbV₄O₁₄ crystallizes in the triclinic space group P-1 (no. 2), with a = 7.2997(15) (Å), b = 7.2932(15) (Å), c = 13.379(3) (Å), α = 93.68(3)°, β = 99.68(3)°, γ = 91.49(3)°, V = 700.2(2) (ų) and Z = 2. Ba₃PbV₄O₁₄ exhibits a novel two-dimensional layered structure consisting of corner shared VO₄ tetrahedra that are linked by edge shared PbO₇ polyhedra, in which the Ba²⁺ cations occupy the interlayer region. The Pb²⁺ cations are in asymmetric coordination environments attributable to its lone pair. Infrared, Raman, and UV–vis diffuse reflectance spectroscopy, thermogravimetric analysis, and dipole moment calculations are also presented.     

XPS/EXAFS study of cycleability improved LiMn2O4 thin film cathodes prepared by solution deposition

The influence of Sn substitution in LiMn₂O₄ thin films as a cathode has been studied via solution deposition to improve the electrochemical performance of thin film lithium batteries. LiSn_0.025Mn_1.95O₄ thin films showed the most promising performance, i.e. a high capacity retention of 77% at 10 C after the 500th cycle, due to the increased average Mn valence state. The thin films of LiSn_x/2Mn_2?xO₄ (x ? 0.10) showed significant precipitation of SnO₂ and SnO after the cycling evaluation.