Accelerating photocatalytic hydrogen evolution and pollutant degradation by coupling organic co-catalysts with TiO2

Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials; the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron-hole separation, photocatalytic H₂ evolution, and dye degradation over TiO₂ nanosheets. OA-modified TiO₂ samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H₂ evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO₂ photocatalyst reached 2.37 mmol g^-1 h^-1 and 1.43 × 10^?2 min^?1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO₂, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO₂. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.     

Building surface defects by doping with transition metal on ultrafine TiO2 to enhance the photocatalytic H2 production activity

Inefficient charge separation and limited light absorption are two critical issues associated with high-efficiency photocatalytic H₂ production using TiO₂. Surface defects within a certain concentration range in photocatalyst materials are beneficial for photocatalytic activity. In this study, surface defects (oxygen vacancies and metal cation replacement defects) were induced with a facile and effective approach by surface doping with low-cost transition metals (Co, Ni, Cu, and Mn) on ultrafine TiO₂. The obtained surface-defective TiO₂ exhibited a 3–4-fold improved activity compared to that of the original ultrafine TiO_2. In addition, a H₂ production rate of 3.4 μmol/h was obtained using visible light (λ > 420 nm) irradiation. The apparent quantum yield (AQY) at 365 nm reached 36.9% over TiO₂-Cu, significantly more than the commercial P25 TiO₂. The enhancement of photocatalytic H₂ production activity can be attributed to improved rapid charge separation efficiency and expanded light absorption window. This hydrothermal treatment with transition metal was proven to be a very facile and effective method for obtaining surface defects.     

Effects of doping La and Cu on photoinduced charge properties of TiO2 and its relationships with photocatalytic activity

The pure, 1 mol% only La or only Cu doped TiO₂ and La and Cu codoped TiO₂ were prepared by a sol-gel process. The effects of doping on photoinduced charge properties of nanosized TiO₂ were mainly investigated by means of Surface Photovoltage Spectrum (SPS) and Photoluminescence Spectrum (PL), together with their relationships with photocatalytic activity. The results show that La dopant can inhibit the phase transformation of TiO₂, meanwhile improve the separation rate of photoinduced charge carriers, and enrich the binding surface states. However, Cu dopant has a reverse effect compared to La dopant. This is responsible for the results that doping La is favorable for the increase in the photocatalytic activity for degrading the RhB solution, while doping Cu is bad to photocatalyitc reaction. In addition, codoping La and Cu cannot exhibit an obvious combination effect.     

3D flower-like heterostructured TiO2@Ni(OH)2 microspheres for solar photocatalytic hydrogen production

TiO₂@Ni(OH)₂ core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)₂ nanoflakes on the surfaces of TiO₂ microspheres; this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.     

Enhancement of visible-light photocatalytic activity of Cu-doped TiO<Subscript>2</Subscript> nanoparticles

Bare TiO₂ and Cu-doped TiO₂ nanoparticles with different nominal doping amounts of Cu ranging from of 0.5 to 5.0 mol% were synthesized using the modified sol–gel method. The samples were physically characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller-specific surface area, UV–Vis diffuse reflectance spectroscopy, zeta potential, X-ray photoelectron spectroscopy, inductively coupled plasma, and photoluminescence techniques. The Cu-doped TiO₂ exhibited good photocatalytic activity in mineralization of oxalic acid and formic acid under visible light irradiation. Photomineralization of oxalic and formic acids under visible light irradiation revealed greatly enhanced photoactivity exhibited by the 2.0 mol% Cu-doped TiO₂ photocatalyst compared to bare TiO₂ . The enhanced photocatalytic performance arises from copper ion doping in the TiO₂ structure, leading to an extended photoresponsive range, enhanced photogenerated charge separation, and transportation efficiency.     

Hierarchical TiO2 nanosheet‐assembled nanotubes with dual electron sink functional sites for efficient photocatalytic degradation of rhodamine B

A novel Pt–TiO₂/Ag nanotube photocatalyst has been synthesized successfully via a facile method. TiO₂ nanotubes are assembled with numerous ultrathin TiO₂ nanosheets and show a highly open structure. The gaps between adjacent TiO₂ nanosheets can serve as channels for the access of reactants, accelerating the mass transfer process. During the fabrication process of the Pt–TiO₂/Ag nanotube photocatalyst, high‐quality Pt–SiO₂ nanotubes are synthesized first with the structure‐directing effect of polyvinylpyrrolidone. Then a TiO₂ layer is coated on the outside surface of the silica nanotubes. The introduced titanium species can be converted into TiO₂ nanosheet structure during the subsequent hydrothermal treatment, gradually constructing nanosheet‐assembled nanotubes. Lastly, after the introduction of another electron sink function site of Ag through UV irradiation, the Pt–TiO₂/Ag nanotube photocatalyst with dual electron sink functional sites is obtained. The specially doped Pt and Ag NPs can simultaneously inhibit the recombination process of photogenerated charge carriers and increase light utilization efficiency. Therefore, the as‐synthesized Pt–TiO₂/Ag nanotube catalyst exhibits a high photocatalytic degradation performance for rhodamine B of 0.2 min^?1, which is about 3.2 and 5.3 times as high as that of Pt–TiO₂ and TiO₂ nanotubes because of the enhanced charge carrier separation efficiency. Furthermore, in the unique nanoarchitecture, the nanotubes are assembled with numerous ultrathin TiO₂ nanosheets, which can absorb abundant active species and dye molecules for photocatalytic reaction. On the basis of experimental results, a possible rhodamine B degradation mechanism is proposed to explain the excellent photocatalytic efficiency of the Pt–TiO₂/Ag nanotube photocatalyst.     

Nitrogen-doped TiO<Subscript>2</Subscript> nanopowders prepared by chemical vapor synthesis: band structure and photocatalytic activity under visible light

During chemical vapor synthesis of TiO₂ nanopowders, nitrogen atoms were doped into the crystal lattice of TiO₂. The nitrogen atoms were predominantly incorporated substitutionally in the crystal lattice of TiO₂ nanopowders up to the doping level of 1.25 mol% nitrogen, whereas they were in both interstitial and substitutional sites over about 1.43 mol% nitrogen. From the photocatalytic activity of nitrogen-doped TiO₂ estimated by decomposition of methylene blue under visible light, it was found that the substitutional nitrogen anions appearing at the low level doping was beneficial to its photocatalytic activity, whereas the interstitial ones appearing at the high level doping over 1.25 mol% nitrogen were not. The improved photocatalytic activity due to the substitutionally doped nitrogen was attributed to band gap narrowing which was confirmed by the studies of XPS, near edge X-ray absorption fine structure, and UV–Vis absorption.     

Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Efficient separation of photogenerated electrons and holes, and associated surface reactions, is a crucial aspect of efficient semiconductor photocatalytic systems employed for photocatalytic hydrogen production. A new CoO_x/TiO₂/Pt photocatalyst produced by template‐assisted atomic layer deposition is reported for photocatalytic hydrogen production on Pt and CoO_x dual cocatalysts. Pt nanoclusters acting as electron collectors and active sites for the reduction reaction are deposited on the inner surface of porous TiO₂ nanotubes, while CoO_x nanoclusters acting as hole collectors and active sites for oxidation reaction are deposited on the outer surface of porous TiO₂ nanotubes. A CoO_x/TiO₂/Pt photocatalyst, comprising ultra‐low concentrations of noble Pt (0.046 wt %) and CoO_x (0.019 wt %) deposited simultaneously with one atomic layer deposition cycle, achieves remarkably high photocatalytic efficiency (275.9 μmol h⁻¹), which is nearly five times as high as that of pristine TiO₂ nanotubes (56.5 μmol h⁻¹). The highly dispersed Pt and CoO_x nanoclusters, porous structure of TiO₂ nanotubes with large specific surface area, and the synergetic effect of the spatially separated Pt and CoO_x dual cocatalysts contribute to the excellent photocatalytic activity.     

Two‐Dimensional Hollow TiO2 Nanoplates with Enhanced Photocatalytic Activity

Two‐dimensional anatase TiO₂ hollow nanoplates were firstly synthesized through a facile synthesis route by using α‐Fe₂O₃ nanoplates as removable templates. Two‐dimensional hollow TiO₂ nanoplates with different ratios of anatase and rutile phases were obtained by adjusting the calcining temperature. The average diameters were around 600 nm, and the shell thickness was approximately 30 nm. The photocatalytic performance of TiO₂ was investigated by decomposing rhodamine B under simulated sunlight. Among the TiO₂ samples, the anatase TiO₂ hollow nanoplates manifested a significant enhancement in the photocatalytic performances. The excellent catalytic performance can be attributed to the unique structure of the two‐dimensional anatase TiO₂ hollow nanoplates, including a large surface area and increased dye–photocatalyst contact areas as well as more active sites for photodegradation.     

Preparation of SnO2–TiO2/Fly Ash Cenospheres and its Application in Phenol Degradation

SnO₂–TiO₂/fly ash cenospheres (FAC) were prepared via hydrothermal method and used as an active photocatalyst in a photocatalytic system. Scanning electron microscopy, X‐ray diffraction analysis, UV–Vis diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy and N₂ adsorption–desorption measurements were used to determine the structure and optical property of SnO₂–TiO₂/FAC. Phenol was selected as the model substance for photocatalytic reactions to evaluate catalytic ability. Results showed that the degradation efficiency of phenol by SnO₂–TiO₂/FAC was 90.7% higher than that decomposed by TiO₂/FAC. Increased efficiency could be due to the enhanced synergistic effect of semiconductors and FAC could provide more adsorption sites for the pollutant in the photocatalytic reaction. Furthermore, SnO₂–TiO₂/FAC composites exhibited excellent photocatalytic stability in four reuse cycles. Radical‐trapping experiments further revealed the dominating functions of holes in the photocatalytic reaction.     

Ni nanoparticles as electron-transfer mediators and NiSx as interfacial active sites for coordinative enhancement of H2-evolution performance of TiO2

The development of efficient photocatalytic H₂-evolution materials requires both rapid electron transfer and an effective interfacial catalysis reaction for H₂ production. In addition to the well-known noble metals, low-cost and earth-abundant non-noble metals can also act as electron-transfer mediators to modify photocatalysts. However, as almost all non-noble metals lack the interfacial catalytic active sites required for the H₂-evolution reaction, the enhancement of the photocatalytic performance is limited. Therefore, the development of new interfacial active sites on metal-modified photocatalysts is of considerable importance. In this study, to enhance the photocatalytic evolution of H₂ by Ni-modified TiO₂, the formation of NiS_x as interfacial active sites was promoted on the surface of Ni nanoparticles. Specifically, the co-modified TiO₂/Ni-NiS_x photocatalysts were prepared via a two-step process involving the photoinduced deposition of Ni on the TiO₂ surface and the subsequent formation of NiS_x on the Ni surface by a hydrothermal reaction method. It was found that the TiO₂/Ni-NiS_x photocatalysts exhibited enhanced photocatalytic H₂-evolution activity. In particular, TiO₂/Ni-NiS_x(30%) showed the highest photocatalytic rate (223.74 μmol h^?1), which was greater than those of TiO₂, TiO₂/Ni, and TiO₂/NiS_x by factors of 22.2, 8.0, and 2.2, respectively. The improved H₂-evolution performance of TiO₂/Ni-NiS_x could be attributed to the excellent synergistic effect of Ni and NiS_x, where Ni nanoparticles function as effective mediators to transfer electrons from the TiO₂ surface and NiS_x serves as interfacial active sites to capture H⁺ ions from solution and promote the interfacial H₂-evolution reaction. The synergistic effect of the non-noble metal cocatalyst and the interfacial active sites may provide new insights for the design of highly efficient photocatalytic materials.     

Ni-based photocatalytic H2-production cocatalysts2

Photocatalysis is believed to be one of the best methods to realize sustainable H₂ production. However, achieving this through heterogeneous photocatalysis still remains a great challenge owing to the absence of active sites, sluggish surface reaction kinetics, insufficient charge separation, and a high thermodynamic barrier. Therefore, cocatalysts are necessary and of great significance in boosting photocatalytic H₂ generation. This review will focus on the promising and appealing low-cost Ni-based H₂-generation cocatalysts as the alternatives for the high-cost and low-abundance noble metal cocatalysts. Special emphasis has been placed on the design principle, modification strategies for further enhancing the activity and stability of Ni-based cocatalysts, and identification of the exact active sites and surface reaction mechanisms. Particularly, four types of modification strategies based on increased light harvesting, enhanced charge separation, strengthened interface interaction, and improved electrocatalytic activity have been thoroughly discussed and compared in detail. This review may open a new avenue for designing highly active and durable Ni-based cocatalysts for photocatalytic H₂ generation.     

Fabrication of S-scheme hollow TiO2@Bi2MoO6 composite for efficiently photocatalytic CO2 reduction

Herein, an S-scheme hollow TiO₂@Bi₂MoO₆ heterojunction was synthesized for photocatalytic reduction of CO₂ under simulated sunlight. Among all prepared composites, the TiO₂@Bi₂MoO₆ with 20% of TiO₂ exhibited the highest CO yield (183.97 μmol/g within 6 h), which was 4.0 and 2.4 times higher than pristine TiO₂ and Bi₂MoO₆, respectively. The improved photocatalytic activity may be due to the formation of S-scheme heterojunction to promote the separation and transfer of photogenerated charge carriers. Additionally, this hollow structure provided abundant sites in terms of CO₂ adsorption and activation. Meanwhile, the photogenerated charge transfer mechanism of the S-scheme was verified by work function calculations, Electron paramagnetic resonance (EPR) measurements as well as X-ray photoelectron spectroscopy (XPS). This research presents a novel approach to improve photocatalytic reduction of CO₂ via morphology modulation and the fabrication of S-scheme heterojunction.     

Preparation of Ce‐doped TiO2 Hollow Fibers and Their Photocatalytic Degradation Properties for Dye Compound

Cerium‐doped titanium dioxide (TiO₂) with a hollow fiber structure was successfully prepared using ammonium ceric nitrate and tetrabutyltitanate as precursors and cotton fiber as the template. The effects of cerium (Ce)‐doping on the crystallite sizes, crystal pattern, and optical property of the prepared catalysts were investigated by means of techniques such as scanning electron microscopy (SEM), X‐ray diffraction (XRD), BET surface area, and UV‐vis diffuse absorption spectroscopy. SEM observation showed that the prepared TiO₂ fibers possessed fibrous shape inherited from the cotton fiber and had a hollow structure. As confirmed by XRD and UV‐vis diffuse absorption spectroscopy examinations, Ce‐doping restrained the growth of grain size and extended the photoabsorption edge of TiO₂ hollow fiber into the visible light region. The present photocatalyst showed higher photocatalytic reactivity in photodegradation of highly concentrated methylene blue (MB) solutions than pure TiO₂ under UV and visible light, and the amount of Ce‐doped significantly affected the catalytic property. In the experiment condition, the photocatalytic activity of 0.5 mol% Ce‐doped TiO₂ fiber was optimal of all the prepared samples. In addition, the possibility of cyclic usage of the photocatalyst was also confirmed. The material was easily removed by centrifugal separation. Therefore, using the template method and by doping with cerium, TiO₂ may hopefully become a low‐energy consuming, high activity and green environmentally friendly catalytic material.     

TiO2 Nanotube Arrays Modified with Cr‐Doped SrTiO3 Nanocubes for Highly Efficient Hydrogen Evolution under Visible Light

In recent decades, solar‐driven hydrogen production over semiconductors has attracted tremendous interest owing to the global energy and environmental crisis. Among various semiconductor materials, TiO₂ exhibits outstanding photocatalytic properties and has been extensively applied in diverse photocatalytic and photoelectric systems. However, two major drawbacks limit practical applications, namely, high charge‐recombination rate and poor visible‐light utilization. In this work, heterostructured TiO₂ nanotube arrays grafted with Cr‐doped SrTiO₃ nanocubes were fabricated by simply controlling the kinetics of hydrothermal reactions. It was found that coupling TiO₂ nanotube arrays with regular SrTiO₃ nanocubes can significantly improve the charge separation. Meanwhile, doping Cr cations into SrTiO₃ nanocubes proved to be an effective and feasible approach to enhance remarkably the visible‐light response, which was also confirmed by theoretical calculations. As a result, the rate of photoelectrochemical hydrogen evolution of these novel heteronanostructures is an order of magnitude larger than those of TiO₂ nanotube arrays and other previously reported SrTiO₃/TiO₂ nanocomposites under visible‐light irradiation. Furthermore, the as‐prepared Cr‐doped SrTiO₃/TiO₂ heterostructures exhibit excellent durability and stability, which are favorable for practical hydrogen production and photoelectric nanodevices.     

Photocatalytic degradation of organic compounds by Au-TiO2/sepiolite composites as the highly efficient catalysts

Photocatalytic oxidation of methyl orange (MO) and Congo red (CR) as typical model organic contaminants was investigated in aqueous solution within a cooperating Au/TiO₂/sepiolite heterostructure system under UV light irradiation. The Au/TiO₂/sepiolite composites with a single-crystalline (anatase) framework was synthesized by a facile sol-gel method using titanium tetrachloride as a TiO₂ precursor and depositing metal Au on the surface of TiO₂ nanostructures via a facile chemical reduction process. The crystal structure, surface area, light adsorption and the photoinduced charge separation rate of the photocatalyst prepared were characterized in detail. As compared with the pristine TiO₂, the Au/TiO₂/sepiolite hybrid material exhibited good photocatalytic efficiency (90%) for the UV-light photooxidation of methyl orange, which is four-fold of that of reference TiO₂. In addition, Au/TiO₂/sepiolite hybrid material also shows a good photodegradation performance toward Congo red removal. The highly efficient photocatalytic activity is associated with the strong adsorption ability of sepiolite for aromatic dye molecules, fast photogenerated charge separation due to the formation of Schottky junction between TiO₂ and metallic Au. This work suggests that the combination of the excellent adsorption properties of sepiolite and the efficient separation effect of noble metallic nanoparticles provides a versatile strategy for the synthesis of novel and highly efficient photocatalysts.     

On the Origin of the Visible‐Light Activity of Titanium Dioxide Doped with Carbonate Species

Plane‐wave‐based pseudopotential density functional theory (DFT) calculations are used to elucidate the origin of the high photocatalytic efficiency of carbonate‐doped TiO₂. Two geometrically possible doping positions are considered, including interstitial and substitutional carbon atoms on Ti sites. From the optical absorption properties calculations, we believe that the formation of carbonates after doping with interstitial carbon atoms is crucial, whereas the contribution from the cationic doping on Ti sites is negligible. The carbonate species doped TiO₂ exhibits excellent absorption in the visible‐light region of 400–800 nm, in good agreement with experimental observations. Electronic structure analysis shows that the carbonate species introduce an impurity state from Ti 3d below the conduction band. Excitations from the impurity state to the conduction band may be responsible for the high visible‐light activity of the carbon doped TiO₂ materials.     

Photo-depositing Ru and RuO2 on Anatase TiO2 Nanosheets as Co-catalysts for Photocatalytic O2 Evolution from Water Oxidation

TiO₂ nanosheets mainly exposed (001) facet were prepared through a hydrothermal process with HF as the morphology-directing agent. Ru and RuO₂ species were loaded by photo-deposition methods to prepare the photocatalysts. The structural features of the catalysts were characterized by X-ray di raction, transmission electron microscopy, inductively cou-pled plasma atomic emission spectrum, and H₂ Temperature-programmed reduction. The photocatalytic property was studied by the O₂ evolution from water oxidation, which was examined with respect to the in uences of Ru contents as well as the oxidation and reduction treatments, suggesting the charge separation effect of the Ru species co-catalysts on di erent facets of TiO₂ nanosheets. In contrast to Ru/TiO₂ and RuO₂/TiO₂ with the single deposited co-catalyst, the optimized catalyst 0.5%Ru-1.0%RuO₂/TiO₂ with dual co-catalysts achieved a much improved catalytic performance, in terms of the synergetic effect of dual co-catalysts and the enhanced charge separation effect.     

Hydrothermal synthesis of TiO2 nanorods: formation chemistry,growth mechanism,and tailoring of surface properties for photocatalytic activities

Titanium dioxide (TiO₂) is one of the best semiconductor photocatalysts with optical band gap of 3.2 eV. The optical band gap and photocatalytic properties could be further tuned by tailoring shape, size, composition, and morphology of the nanostructures. Hydrothermal synthesis methods have been applied to produce well-controlled nanostructured TiO₂ materials with different morphologies and improved optoelectronic properties. Among various morphologies, one-dimensional (1D) TiO₂ nanostructures are of great importance in the field of energy, environmental, and biomedical because of the directional transmission properties resulting from their 1D geometry. Particularly, TiO₂ nanorods (NRs) have gained special attention because of their densely packed structure, quantum confinement effect, high aspect ratio, and large specific surface area that could specially improve the directional charge transmission efficiency. This results in the effective photogenerated charge separation and light absorption, which are really important for potential applications of TiO₂-based materials for photocatalytic and other important applications. In this review, hydrothermal syntheses of TiO₂ NRs including the formation chemistry and the growth mechanism of NRs under different chemical environments and effects of various synthesis parameters (pH, reaction temperature, reaction time, precursors, solvents etc.) on morphology and optoelectronic properties have been discussed. Recent developments in the hydrothermal synthesis of TiO₂ NRs and tailoring of their surface properties through various modification strategies such as defect creation, doping, sensitization, surface coating, and heterojunction formation with various functional nanomaterials (plasmonic, oxide, quantum dots, graphene-based nanomaterials, etc.) have been reported to improve the photocatalytic activities. Furthermore, applications of TiO₂ NRs/tailored TiO₂ NRs as superior photocatalysts in degradation of organic pollutants and bacterial disinfection have been discussed with emphasis on mechanisms of action and recent advances in the fields.     

Direct View of Cr Atoms Doped in Anatase TiO2(001) Thin Film

Imaging the doping elements is critical for understanding the photocatalytic activity of doped TiO₂ thin film. But it is still a challenge to characterize the interactions between the dopants and the TiO₂ lattice at the atomic level. Here, we use high angle annular dark-field/annular bright-field scanning transmission electron microscope (HAADF/ABF-STEM) combined with electron energy loss spectroscopy (EELS) to directly image the individual Cr atoms doped in anatase TiO₂(001) thin film from [100] direction. The Cr dopants, which are clearly imaged through the atomic-resolution EELS mappings while can not be seen by HADDF/ABF-STEM, occupy both the substitutional sites of Ti atoms and the interstitial sites of TiO₂ matrix. Most of them preferentially locate at the substitutional sites of Ti atoms. These results provide the direct evidence for the doping structure of Cr-doped A-TiO₂ thin film at the atomic level and also prove the EELS mapping is an excellent technique for characterizing the doped materials.