Synthesis and properties of novel σ–π alternating polymers with triphenylamine and organosilicon units

We have synthesized novel σ–π conjugated polymers with N,N‐bis(p‐ethynylphenyl)‐N‐(p‐tolyl)amine as the π‐unit. The electroluminescent devices, with a double‐layer system composed of Alq and the present polymers as the emitting‐electron‐transporting and hole‐transporting layers respectively, emit green electroluminescence with a maximum intensity of 760 cd m^?2. Copyright © 2001 John Wiley & Sons, Ltd.     

Organic electroluminescent devices using organosilicon polymers containing phenylene or diethynylanthracene units

Double‐layer electroluminescent (EL) devices composed of an alternating polymer with mono‐, di‐, or tri‐silanylene and phenylene units, [(Si R) _m (C₆H₄)] _n (R = alkyl, m = 1–3) as a hole‐transporting layer, and tris(8‐quinolinolato)­aluminium(III) complex (Alq) as an electron‐transporting–emitting layer were fabricated. The longer silanylene chain lengths in the polymer, on going from m = 1 to m = 2 and 3, result in better electrical properties for the EL devices, implying that the σ–π conjugation in the polymers plays an important role in the hole‐transporting properties, including the hole‐injection efficiency from an anode. This is in marked contrast to the improved hole‐transporting properties that occur in response to reducing the silanylene chain length of silanylene‐diethynylanthracene polymers previously reported. The UV absorption maxima of silanylene‐phenylene polymers shift to longer wavelengths with increasing m, and their oxidation peak potentials in cyclic voltammograms shift to lower potential with increasing m, in accordance with the improved electrical properties of the device that are observed with the polymers containing the longer silanylene chain. A triple‐layer EL device with a hole‐transporting layer of monosilanylene‐diethynylanthracene polymer, an electron‐transporting–emitting layer of Alq, and an electron‐blocking layer of N,N′‐diphenyl‐N,N′‐bis(3‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine (TPD) exhibited a maximum efficiency of 1.0 lm W⁻¹ and a maximum luminance of 14750 cd m⁻², both of which are much higher than the values obtained from a conventional EL device with TPD/Alq. Copyright © 1999 John Wiley & Sons, Ltd.     

Copoly(p‐phenylene)s containing bipolar triphenylamine and 1,2,4‐triazole groups: Synthesis,optoelectronic properties,and applications

Two novel copoly(p‐phenylene)s ( P1 – P2 ) containing bipolar groups (12.8 and 6.8 mol %, respectively), directly linked hole transporting triphenylamine and electron transporting aromatic 1,2,4‐triazole, were synthesized to enhance electroluminescence (EL) of poly(p‐phenylene vinylene) (PPV) derivatives. The bipolar groups not only enhance thermal stability but also promote electron affinity and hole affinity of the resulting copoly(p‐phenylene)s. Blending the bipolar copoly‐(p‐phenylene)s ( P1 – P2 ) with PPV derivatives ( d6‐PPV ) as an emitting layer effectively improve the emission efficiency of its electroluminescent devices [indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/polymer blend/Ca (50 nm)/Al (100 nm)]. The maximum luminance and maximum luminance efficiency were significantly enhanced from 310 cd m^?2 and 0.03 cd A^?1 ( d6‐PPV ‐based device) to 1450 cd m^?2 and 0.20 cd A^?1 (blend device with d6‐PPV / P1 = 96/4 containing ～0.5 wt % of bipolar groups), respectively. Our results demonstrate the efficacy of the copoly(p‐phenylene)s with bipolar groups in enhancing EL of PPV derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Hole‐transporting host‐polymer series consisting of triphenylamine basic structures for phosphorescent polymer light‐emitting diodes

A series of novel styrene derived monomers with triphenylamine‐based units, and their polymers have been synthesized and compared with the well‐known structure of polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine with respect to their hole‐transporting behavior in phosphorescent polymer light‐emitting diodes (PLEDs). A vinyltriphenylamine structure was selected as a basic unit, functionalized at the para positions with the following side groups: diphenylamine, 3‐methylphenyl‐aniline, 1‐ and 2‐naphthylamine, carbazole, and phenothiazine. The polymers are used in PLEDs as host polymers for blend systems with the following device configuration: glass/indium–tin–oxide/PEDOT:PSS/polymer‐blend/CsF/Ca/Ag. In addition to the hole‐transporting host polymer, the polymer blend includes a phosphorescent dopant [Ir(Me‐ppy)₃] and an electron‐transporting molecule (2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole). We demonstrate that two polymers are excellent hole‐transporting matrix materials for these blend systems because of their good overall electroluminescent performances and their comparatively high glass transition temperatures. For the carbazole‐substituted polymer (T_g = 246 °C), a luminous efficiency of 35 cd A^?1 and a brightness of 6700 cd m^?2 at 10 V is accessible. The phenothiazine‐functionalized polymer (T_g = 220 °C) shows nearly the same outstanding PLED behavior. Hence, both these polymers outperform the well‐known polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine, showing only a luminous efficiency of 7.9 cd A^?1 and a brightness of 2500 cd m^?2 (10 V). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3417–3430, 2010     

High‐efficiency blue light‐emitting polymers based on 3,6‐silafluorene and 2,7‐silafluorene

A novel blue‐emitting polymer based on 3,6‐silafluorene and 2,7‐silafluorene was synthesized via the Suzuki polycondensation. The resulting polymers are readily soluble in common organic solvents, such as toluene, xylene, THF, and chloroform. The thermal, electrochemical, photophysical, and electroluminescence properties of the resulting polymers were investigated. The device fabricated from the copolymer with a configuration of ITO/PEDOT:PSS/PVK/polymer/Ba/Al exhibited an external quantum efficiency of 1.95%, a luminous efficiency of 1.69 cd A^?1 and a maximal brightness of 6000 cd m^?2. It has been found that the incorporation of the 3,6‐silafluorene unit into the poly(2,7‐silafluorene) main chain can not only improve the color purity of the devices from the resulting copolymer but also enhance its device efficiency. Moreover, no undesired long‐wavelength green emission was observed in the PL spectra of P36‐27SiF90 compared to that of PFO with a dominating emission at 500–600 nm after thermal annealing at 200 °C for 8 h. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4941–4949, 2007     

Carbazolevinylene‐based polymers and model compounds with oxadiazole and triphenylamine segments: Synthesis,photophysics, and electroluminescence

Two new soluble alternating carbazolevinylene‐based polymers POXD and PTPA as well as the corresponding model compounds MOXD and MTPA were synthesized by Heck coupling. POXD and MOXD contained 2,5‐diphenyloxadiazole segments, while PTPA and MTPA contained triphenylamine segments. All samples displayed high thermal stability. The polymers had higher glass transition temperature (T_g) than their corresponding model compounds. The samples showed absorption maximum at 364–403 nm with optical band gap of 2.62–2.82 eV. They emitted blue‐green light with photoluminescence (PL) emission maximum at 450–501 nm and PL quantum yields in THF solution of 0.15–0.36. The absorption and the PL emission maxima of PTPA and MTPA were blue‐shifted as compared to those of POXD and MOXD . The electroluminescence (EL) spectra of multilayered devices made using four materials exhibited bluish green emissions, which is well consistent with PL spectra. The EL devices made using poly(vinyl carbazole) doped with MOXD and MTPA as emitting materials showed luminances of 12.1 and 4.8 cd m^?2. POXD and PTPA exhibited 25.4, and 96.3 cd m^?2, respectively. The polymer containing the corresponding molecules in the repeating group showed much higher device performances. Additionally, POXD and MOXD exhibited better stability of external quantum efficiency (EQE) and luminous efficiency with current density resulting from enhancing the electron transporting properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5592–5603, 2008     

Luminescence properties of poly(p‐phenylenevinylene) derivatives carrying directly attached hole‐transporting carbazole and electron‐transporting phenyloxadiazole pendants

New poly(p‐phenylenevinylene) (PPV) derivatives ( polymer 1 and 2 ) that carry hole‐transporting carbazole and electron‐transporting phenyloxadiazole pendants were synthesized and their photo‐ and electroluminescence properties were studied. Polymer 1 is poly[2‐(N‐carbazolyl)‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] that has both carbazole and 2‐ethylhexyl pendant groups. And polymer 2 is poly[2‐{4‐[5‐(4‐t‐butylphenyl)‐1,3,4‐oxadiazolyl]phenyl}‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene], which bears the 2‐(4‐t‐butylphenyl)‐5‐phenyl‐1,3,4‐oxadiazole pendants. The optical properties of the polymer films were studied by UV‐vis absorption, photoluminescence (PL) and electroluminescence (EL) spectroscopy. EL devices with the configuration of ITO/poly(3,4‐ethylenedioxy‐2,5‐thienylene) (PEDOT) polymer/Ca/Al were constructed and the device performances were compared. Polymer 1 emits bright yellowish green light (λ_max = 530 nm), whereas polymer 2 emits yellowish orange (λ_max = 540 nm) light. The device fabricated using polymer 1 showed a low turn‐on electric field of 0.31 MV/cm and the maximum luminance of 30,390 cd/m² at 1.50 MV/cm. Polymer 2 exhibited a little poorer device performance (turn‐on electric field: 0.94 MV/cm; maximum luminance: 5,720 cd/m² at 2.74 MV/cm). Maximum photometric efficiencies of the devices were 4.4 and 1.3 cd/A, respectively.     

Synthesis and characterization of novel poly(p‐phenylenevinylene) derivatives containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties

PPV‐based copolymers containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties have been successfully synthesized by Wittig‐Horner reaction and characterized by means of UV‐vis, photoluminescence, electroluminescence spectra, and cyclic voltammetry. All of these copolymers can be dissolved in common organic solvents such as chloroform, tetrahydrofuran, and toluene. The PL maxima in the film state are located at 582, 556, and 552 nm for P1, P2, and P3, respectively. The HOMO and LUMO levels of P2 are found to be ?5.21 and ?2.68 eV, respectively; whereas those of P3 are found to be ?5.26 and ?2.71 eV, respectively. The cyclic voltammetry result indicates that the conversion of electron‐donating sulfide to electron‐withdrawing sulfoxide or sulfone group in polymers plays a dominating role in increasing its oxidation potential. Yellowish‐green light ranging from 568 to 540 nm was observed for the single layer device with the configuration of ITO/Polymer/Ca/Al. Double layer devices with Zn (BTZ)₂ as a hole blocking layer exhibited enhanced EL performance compared to the single layer devices. The maximum brightness of the double layer devices of P1, P2, and P3 is 278, 400, and 796 cd/m², respectively. The results of EL and electrochemical analyses revealed that they are promising candidate materials for organic, light‐emitting diodes with hole‐transporting ability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4291–4299, 2007     

New host homopolymers containing pendant triphenylamine derivatives: Synthesis,optical, electrochemical properties and its blend with Ir(ppy)3 for green phosphorescent organic light‐emitting devices

Two vinyl homopolymers poly(N‐(4‐(4‐(4‐vinylbenzyloxy)styryl)phenyl)‐N‐phenylbenzenamine) (PVST ) and poly(4‐vinyltriphenylamine) (PTPA ) containing pendant hole‐transporting triphenylamine and 4‐oxystyryltriphenylamine groups, respectively, were synthesized by radical polymerization and employed as hosts for tris(2‐phenylpyridine) iridium [Ir(ppy)₃] phosphor. Structural influences of the hole‐transporting groups upon optoelectronic properties were investigated by photophysical, electrochemical, and electroluminescent methods. The polymers were readily soluble in common organic solvents and their weight‐average molecular weights (M_w) were 5.68 × 10⁴ and 1.90 × 10⁴, respectively. The emission spectra (both photoluminescence, PL and electroluminescent, EL) of the blends [PTPA with 4 wt % Ir(ppy)₃] showed dominant green emission (517 nm) attributed to Ir(ppy)₃ due to efficient energy transfer from PTPA to Ir(ppy)₃. The HOMO levels of PVST and PTPA, estimated from onset oxidation potentials in their cyclic voltammograms, were ?5.14 and ?5.36 eV, which are much higher than ?5.8 eV of the conventional poly(9‐vinylcarbazole) (PVK) host owing to high hole‐affinity of the triphenylamine groups. The optoelectronic performances of phosphorescent EL devices, using PVST and PTPA as hosts and Ir(ppy)₃ as dopant (indium tin oxide, ITO/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)/PVST or PTPA:Ir(ppy)₃(4 wt %):PBD(40 wt %)/BCP/Ca/Al), were investigated. The maximum luminance and luminance efficiency of the PTPA device were 9220 cd/m² and 6.1 cd/A, respectively, which were significantly improved relative to those of PVK and PVST. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7960–7971, 2008     

Iridium complex grafted to 3,6‐carbazole‐alt‐tetraphenylsilane copolymers for blue electrophosphorescence

We designed a 3,6‐dibromo‐9‐hexyl‐9H‐carbazole derivative with the blue emissive iridium complex bis[2‐(4,6‐difluorophenyl)pyridyl‐N,C^2′](picolinato)iridium(III) (FIrpic) linked at the alkyl terminal. Based on this monomer, novel 3,6‐carbazole‐alt‐tetraphenylsilane copolymers grafted with FIrpic were synthesized by palladium‐catalyzed Suzuki coupling reaction, and the content of FIrpic in the polymers could be controlled by feed ratio of the monomers. The polymer films mainly show blue emission from FIrpic, and the emission intensity from the polymer backbones is much weaker compared with the doped analogues, which demonstrates an efficient energy transfer from polymeric host to covalently bonded guest. The phase separation in the polymers was suppressed, which can be identified by atomic force microscopy and designed electroluminescent (EL) devices. EL devices based on the polymers exhibited blue phosphorescence from FIrpic. The luminous efficiency of preliminary devices reached 2.3 cd/A, and the efficiency roll‐off at high current densities was suppressed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1859–1865, 2010     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Deep‐red light‐emitting phosphorescent dendrimer encapsulated tris‐[2‐benzo[b]thiophen‐2‐yl‐pyridyl] iridium (III) core for light‐emitting device applications

New deep‐red light‐emitting phosphorescent dendrimers with hole‐transporting carbazole dendrons were synthesized by reacting tris(2‐benzo[b]thiophen‐2‐yl‐pyridyl) iridium (III) complex with carbazolyl dendrons by DCC‐catalyzed esterification. The resulting first‐, second‐, and third‐generation dendrimers were found to be highly efficient as solution‐processable emitting materials and for use in host‐free electrophosphorescent light‐emitting diodes. We fabricated a host‐free dendrimer EL device with configuration ITO/PEDOT:PSS (40 nm)/dendrimer (55 nm)/BCP (10 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (100 nm) and characterized the device performance. The multilayered devices showed luminance of 561 cd/m² at 383.4 mA/cm² (12 V) for 15 , 1302 cd/m² at 321.3 mA/cm² (14 V) for 16 , and 422 cd/m² at 94.4 mA/cm² (18 V) for 17 . The third‐generation dendrimer, 17 (η_ext = 6.12% at 7.5 V), showed the highest external quantum efficiency (EQE) with an increase in the density of the light‐harvesting carbazole dendron. Three dendrimers exhibited considerably pure deep‐red emission with CIE 1931 (Commission International de L'Eclairage) chromaticity coordinates of x = 0.70, y = 0.30. The CIE coordinates remained very stable with the current density. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable materials for dendrimer light‐emitting diode (DLED) applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7517–7533, 2008     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electroluminescent properties of a partially‐conjugated hyperbranched poly(p‐phenylene vinylene)

In this paper, the electroluminescent properties of a new partially‐conjugated hyperbranched poly (p‐phenylene vinylene) (HPPV) were studied. The single layer light‐emitting device with HPPV as the emitting layer emits blue‐green light at 496 nm, with a luminance of 160 cd/m² at 9 V, a turn‐on voltage of 4.3 V and an electroluminescent efficiency of 0.028 cd/A. By doping an electron‐transport material [2‐(4‐biphenylyl)‐5‐phenyl‐1,3,4‐oxadiazole, PBD] into the emitting layer and inserting a thin layer of tris(8‐hydroxy‐quinoline)aluminum (Alq₃) as electron transporting/hole blocking layer for the devices, the electroluminescent efficiency of 1.42 cd/A and luminance of 1700 cd/m² were achieved. The results demonstrate that the devices with the hyperbranched polymers as emitting material can achieve high efficiency through optimization of device structures. Copyright © 2006 John Wiley & Sons, Ltd.     

D–π–A polysulfones for blue electroluminescence

Donor–π–acceptor type fluorene‐based copolymers with a sulfone unit were designed and synthesized for application in efficient pure‐blue light emitting. The electroluminescence behaviors of these copolymers were investigated by fabricating light‐emitting diodes and electrochemical cell devices. The former device little functioned but the latter worked well. The electrochemical cell devices having a configuration of ITO/PEDOT:PSS/copolymer:ionic liquid/Al exhibited purplish blue electroluminescence with an emission maximum at 434 nm (CIE coordinates (x, y) = (0.17, 0.10)) measured at 7 V. The initial positive scan of the D–π–A polysulfone based light emitting electrochemical cell with a sweep rate of 0.1 V s^?1 afforded a maximum luminance of 1080 cd m^?2 with a current efficiency of 1.96 cd A^?1 at an operating voltage of 12.5 V. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3454–3461     

Dithieno[3,2‐b:2′,3′‐d]pyrrole–alkylthiophene–benzo[c][1,2,5]thiadiazole‐based highly stable and low band gap polymers for polymer light‐emitting diodes

A series of new low band gap π‐conjugated polymers containing N‐alkyldithieno[3,2‐b:2′,3′‐d]pyrrole, benzo[c][1,2,5]thiadiazole, and alkylthiophenes are reported. The polymerization condition was standardized and the use of CuO to obtain high‐molecular‐weight polymer was also realized. The molecular weight of the polymers was found to be in the range of 45,000–53,000. All the polymers were found to be soluble in most of the common organic solvents, such as chloroform, dichloromethane, THF, and chlorobenzene with excellent film forming properties. The λ_max of the polymers was found to be in the range of 687–663 nm with band gap in the range of 1.35–1.43 eV. The oxidation potential of the polymers from cyclic voltammetry was determined to be 0.5–0.75 V. The HOMO levels of the above synthesized polymers were found to be between 5.24 and 5.54 eV. All the polymers exhibited a PL emission in between 755 and 773 nm. The polymers were found to be thermally stable above 277 °C with only a 5% weight loss. From the thermal stability values, it is expected that the current set of polymers are stable enough for the application in electronic devices. To realize the potential use of the polymers, EL devices were fabricated and found to show red emission with comparatively low threshold voltage. A brightness of 54 cd m⁻² for the device with polymer PC could be reached. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6514–6525, 2009     

Improved EL efficiency of fluorene‐thieno[3,2‐b]thiophene‐based conjugated copolymers with hole‐transporting or electron‐transporting units in the main chain

New electroluminescent polymers (poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole) ( P1) and poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine ( P2) ) possess hole‐transporting or electron‐transporting units or both in the main chains. Electron‐deficient benzothiadiazole and electron‐rich triphenylamine moieties were incorporated into the polymer backbone to improve the electron‐transporting and hole‐transporting characteristics, respectively. P1 and P2 show greater solubility than poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene ( PFTT ), without sacrificing their good thermal stability. Moreover, owing to the incorporation of the electron‐deficient benzothiadiazole unit, P1 and P2 exhibit remarkably lower LUMO levels than PFTT , and thus, it should facilitate the electron injection into the polymer layer from the cathode electrode. Consequently, because of the balance of charge mobility, LED devices based on P1 and P2 exhibit greater brightness and efficiency (up to 3000 cd/m² and 1.35 cd/A) than devices that use the pristine PFTT . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 243–253, 2006     

Energy/Hole Transfer Phenomena in Hybrid α‐Sexithiophene (α‐STH) Nanoparticle–CdTe Quantum‐Dot Nanocomposites

Considerable attention has been paid to hybrid organic–inorganic nanocomposites for designing new optical materials. Herein, we demonstrate the energy and hole transfer of hybrid hole‐transporting α‐sexithiophene (α‐STH) nanoparticle–CdTe quantum dot (QD) nanocomposites using steady‐state and time‐resolved spectroscopy. Absorption and photoluminescence studies confirm the loss of planarity of the α‐sexithiophene molecule due to the formation of polymer nanoparticles. Upon photoexcitation at 370 nm, a nonradiative energy transfer (73 %) occurs from the hole‐transporting α‐STH nanoparticles to the CdTe nanoparticles with a rate of energy transfer of 6.13×10⁹ s^?1. However, photoluminescence quenching of the CdTe QDs in the presence of the hole‐transporting α‐STH nanoparticles is observed at 490 nm excitation, which is due to both static‐quenching and hole‐transfer‐based dynamic‐quenching phenomena. The calculated hole‐transporting rate is 7.13×10⁷ s^?1 in the presence of 42×10^?8 M α‐STH nanoparticles. Our findings suggest that the interest in α‐sexithiophene (α‐STH) nanoparticle–CdTe QD hybrid nanocomposites might grow in the coming years because of various potential applications, such as solar cells, optoelectronic devices, and so on.     

Poly(thienylene‐vinylene‐thienylene) with cyano substituent: Synthesis and application in field‐effect transistor and polymer solar cell

A novel conjugated polymer, poly(thienylene‐vinylene‐thienylene) with cyano substituent ( CN‐PTVT ) was synthesized via Stille coupling for the application in air stable field‐effect transistor and polymer solar cell. The polymer was characterized by ¹H NMR, elemental analysis, UV‐vis absorption and photoluminescence spectroscopy, TGA, cyclic voltammetry and XRD analysis. CN‐PTVT exhibits a good thermal stability with 5% weight loss at 306 °C. The FET hole mobility of the polymer reached 5.9 × 10^?3 cm² V^?1 s^?1 with I_on/I_off ratio of 4.9 × 10⁴, which is one of the highest performance among the air‐stable amorphous polymers. The polymer solar cell based on CN‐PTVT as donor and PCBM as acceptor shows a relatively high open‐circuit voltage of 0.82 V and a power conversion efficiency of 0.3% under the illumination of AM1.5, 100 mW/cm². © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4028–4036, 2009