Silicon–oxygen bonding on diphenylsilane through palladium(II)‐catalysed reactions

The reactions of phenols with diphenylsilane are catalysed by palladium(II) catalysts such as Pd(TMEDA)Cl₂ (TMEDA = tetramethylethylenediamine), Pd(DEED)Cl₂ (DEED = N,N′‐diethylethylenediamine), Pd(TEEDA)Cl₂ (TEEDA = N,N′‐tetraethylethylenediamine) or PdCl₂ to form hydrated silanols with molecular formula Ph₂Si(OR)OH·nH₂O (when R = C₆H₅, n = 3; when R = p‐CH₃C₆H₄ or o‐CH₃C₆H₄, n = 1). The reaction of hydroquinone with diphenylsilane in the presence of catalytic amounts of Pd(TMEDA)Cl₂ forms an Si–O‐bonded hydrated aggregate of composition [(C₆H₅)₂Si(OC₆H₄O).0.5H₂0] _n. p‐Benzoquinone reacted with diphenylsilane in the presence of a catalytic amount of Pd(TMEDA)Cl₂ and the reaction proceeded via a multiple pathway involving quinhydrone as an intermediate charge‐transfer complex which reacted further with diphenylsilane to give a linear siloxane. Copyright ­© 2000 John Wiley & Sons, Ltd.     

Tetraphosphine/palladium‐catalyzed Suzuki–Miyaura coupling of heteroaryl halides with 3‐pyridine‐ and 3‐thiopheneboronic acid: an efficient catalyst for the formation of biheteroaryls

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (L1) associated with [Pd(η³‐C₃H₅)Cl]₂ affords an efficient catalyst for Suzuki–Miyaura coupling of 3‐pyridineboronic acid with heteroaryl bromides. Reaction could be performed with as little as 0.02 mol% catalyst and a high turnover number of 2500 is obtained. A wide range of substrates is investigated with satisfactory yields, and good compatibility with aminogroup‐substituted pyridines and unprotected indole is exhibited. This protocol can also be applied successfully to the reaction of heteroaryl bromides with 3‐thiopheneboronic acid. This Pd‐tetraphosphine catalyst efficiently restrains the poisoning effect from heteroaryls, and shows good stability and longevity. Copyright © 2013 John Wiley & Sons, Ltd.     

[Pd(Fmes)2(tmeda)]: A Case of Intermittent C?H⋅⋅⋅F?C Hydrogen‐Bond Interaction in Solution

The X‐ray structure of the title compound [Pd(Fmes)₂(tmeda)] (Fmes=2,4,6‐tris(trifluoromethyl)phenyl; tmeda=N,N,N′,N′‐tetramethylethylenediamine) shows the existence of uncommon C? H???F? C hydrogen‐bond interactions between methyl groups of the TMEDA ligand and ortho‐CF₃ groups of the Fmes ligand. The ¹⁹F NMR spectra in CD₂Cl₂ at very low temperature (157 K) detect restricted rotation for the two ortho‐CF₃ groups involved in hydrogen bonding, which might suggest that the hydrogen bond is responsible for this hindrance to rotation. However, a theoretical study of the hydrogen‐bond energy shows that it is too weak (about 7 kJ mol^?1) to account for the rotational barrier observed (ΔH^≠=26.8 kJ mol^?1), and it is the steric hindrance associated with the puckering of the TMEDA ligand that should be held responsible for most of the rotational barrier. At higher temperatures the rotation becomes fast, which requires that the hydrogen bond is continuously being split up and restored and exists only intermittently, following the pulse of the conformational changes of TMEDA.     

Synthese und Kristallstrukturen von 1,1,3,3‐Tetramethylimidazolinium‐dichlorid und 1,1,4‐Trimethylpiperazinium‐chlorid

Synthesis and Crystal Structures of 1,1,3,3‐Tetramethylimidazolinium Dichloride and 1,1,4‐Trimethylpiperazinium Chloride Single crystals of 1,1,3,3‐tetramethylimidazolinium dichloride ( 1 ) and 1,1,4‐trimethylpiperazinium chloride ( 2 ) were obtained by reaction of CH₂Cl₂ with tetramethylethylenediamine (TMEDA) and NNN′N″N″‐pentamethyldiethylenetriamine (PMDETA), respectively. Both compounds are characterized by single crystal X‐ray diffraction and by IR spectroscopy. 1: [C₇H₁₈N₂]Cl₂, space group P2₁/c, Z = 4, lattice dimensions at 193(2) K: a = 821.97(11), b = 1130.38(8), c = 1143.08(13) pm, β = 100.348(15)°, R₁ = 0.0271. The C₇N₂ heterocyclic ring has envelope conformation like other salts with this dication. 2: [C₇H₁₇N₂]Cl, space group P2₁2₁2₁, Z = 4, lattice dimensions at 100(2) K: a = 1030.37(8), b = 1036.55(6), c = 831.39(4) pm, R₁ = 0.0180. Although the heterocyclic mono‐cation is without site symmetry in the crystal, its molecular symmetry is close to C_s, forming chair conformation of the C₄N₂ six‐membered ring.     

Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005     

Homoleptic Zincate‐Promoted Room‐Temperature Halogen–Metal Exchange of Bromopyridines

Homoleptic lithium tri‐ and tetraalkyl zincates were reacted with a set of bromopyridines. Efficient and chemoselective bromine–metal exchanges were realized at room temperature with a substoichiometric amount of nBu₄ZnLi₂?TMEDA reagent (1/3 equiv; TMEDA=N,N,N′,N′‐tetramethylethylenediamine). This reactivity contrasted with that of tBu₄ZnLi₂?TMEDA, which was inefficient below one equivalent. DFT calculations allowed us to rationalize the formation of N???Li stabilized polypyridyl zincates in the reaction. The one‐pot difunctionalization of dibromopyridines was also realized using the reagent stoichiometrically. The direct creation of C? Zn bonds in bromopyridines enabled us to perform efficient Negishi‐type cross‐couplings.     

Facile construction of symmetric biaryls using (BeDABCO)2Pd2Cl6 as an efficient and highly active catalyst under microwave irradiation

An efficient catalytic system using (BeDABCO)₂Pd₂Cl₆ (BeDABCO, benzyl‐1,4‐diazabicyclo[2.2.2]octane) was developed for the homo‐coupling reaction of various aryl halides. Due to the combination of ionic homogeneous metal catalyst and microwave irradiation, symmetric biaryls were produced in excellent yields and short reaction times in N‐methyl‐2‐pyrrolidone at 120 °C. BeDABCO as an efficient ligand and also a quaternary ammonium salt had an efficient stabilizing effect on the Pd(0) species in this coupling reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

Reaction of Some Indoles with 1,4‐Naphthoquinones in the Presence of Pd(OAc)2

The reaction available for the introduction of an indole unit into the 1,4‐naphthoquinone skeleton is described. The reaction of the indoles with 1,4‐naphthoquinones in CH₃CN in the presence of Pd(OAc)₂ gave the corresponding 2‐(3‐indolyl)‐1,4‐naphthoquinones in moderate yield.     

A trinuclear palladium(II) complex containing N,S‐coordinating 2‐(benzylsulfanyl)anilinide and 1,3‐benzothiazole‐2‐thiolate ligands with a central square‐planar PdN4 motif

The reaction of dichlorido(cod)palladium(II) (cod = 1,5‐cyclooctadiene) with 2‐(benzylsulfanyl)aniline followed by heating in N,N‐dimethylformamide (DMF) produces the linear trinuclear Pd₃ complex bis(μ₂‐1,3‐benzothiazole‐2‐thiolato)bis[μ₂‐2‐(benzylsulfanyl)anilinido]dichloridotripalladium(II) N,N‐dimethylformamide disolvate, [Pd₃(C₇H₄NS₂)₂(C₁₃H₁₂NS)₂Cl₂]·2C₃H₇NO. The molecule has symmetry and a Pd...Pd separation of 3.2012 (4) Å. The outer Pd^II atoms have a square‐planar geometry formed by an N,S‐chelating 2‐(benzylsulfanyl)anilinide ligand, a chloride ligand and the thiolate S atom of a bridging 1,3‐benzothiazole‐2‐thiolate ligand, while the central Pd^II core shows an all N‐coordinated square‐planar geometry. The geometry is perfectly planar within the PdN₄ core and the N—Pd—N bond angles differ significantly [84.72 (15)° for the N atoms of ligands coordinated to the same outer Pd atom and 95.28 (15)° for the N atoms of ligands coordinated to different outer Pd atoms]. This trinuclear Pd₃ complex is the first example of one in which 1,3‐benzothiazole‐2‐thiolate ligands are only N‐coordinated to one Pd centre. The 1,3‐benzothiazole‐2‐thiolate ligands were formed in situ from 2‐(benzylsulfanyl)aniline.     

Evaluating cis‐2,6‐Dimethylpiperidide (cis‐DMP) as a Base Component in Lithium‐Mediated Zincation Chemistry

Most recent advances in metallation chemistry have centred on the bulky secondary amide 2,2,6,6‐tetramethylpiperidide (TMP) within mixed metal, often ate, compositions. However, the precursor amine TMP(H) is rather expensive so a cheaper substitute would be welcome. Thus this study was aimed towards developing cheaper non‐TMP based mixed‐metal bases and, as cis‐2,6‐dimethylpiperidide (cis‐DMP) was chosen as the alternative amide, developing cis‐DMP zincate chemistry which has received meagre attention compared to that of its methyl‐rich counterpart TMP. A new lithium diethylzincate, [(TMEDA)LiZn(cis‐DMP)Et₂] (TMEDA=N,N,N′,N′‐tetramethylethylenediamine) has been synthesised by co‐complexation of Li(cis‐DMP), Et₂Zn and TMEDA, and characterised by NMR (including DOSY) spectroscopy and X‐ray crystallography, which revealed a dinuclear contact ion pair arrangement. By using N,N‐diisopropylbenzamide as a test aromatic substrate, the deprotonative reactivity of [(TMEDA)LiZn(cis‐DMP)Et₂] has been probed and contrasted with that of the known but previously uninvestigated di‐tert‐butylzincate, [(TMEDA)LiZn(cis‐DMP)tBu₂]. The former was found to be the superior base (for example, producing the ortho‐deuteriated product in respective yields of 78 % and 48 % following D₂O quenching of zincated benzamide intermediates). An 88 % yield of 2‐iodo‐N,N‐diisopropylbenzamide was obtained on reaction of two equivalents of the diethylzincate with the benzamide followed by iodination. Comparisons are also drawn using 1,1,1,3,3,3‐hexamethyldisilazide (HMDS), diisopropylamide and TMP as the amide component in the lithium amide, Et₂Zn and TMEDA system. Under certain conditions, the cis‐DMP base system was found to give improved results in comparison to HMDS and diisopropylamide (DA), and comparable results to a TMP system. Two novel complexes isolated from reactions of the di‐tert‐butylzincate and crystallographically characterised, namely the pre‐metallation complex [{(iPr)₂N(Ph)C?O}LiZn(cis‐DMP)tBu₂] and the post‐metallation complex [(TMEDA)Li(cis‐DMP){2‐[1‐C(=O)N(iPr)₂]C₆H₄}Zn(tBu)], shed valuable light on the structures and mechanisms involved in these alkali‐metal‐mediated zincation reactions. Aspects of these reactions are also modelled by DFT calculations.     

Regioselective Benzoylation of 6‐O‐Protected and 4,6‐O‐Diprotected Hexopyranosides as Promoted by Chiral and Achiral Ditertiary 1,2‐Diamines

Monobenzoylation of triols (6‐O‐silylated glycopyranosides) or diols (4,6‐O‐benzylidenated glycopyranosides) with benzoyl chloride and triethylamine at ?60° to 23° is promoted by catalytic amounts of ditertiary 1,2‐diamines. The regioselectivity depends mostly on the structure of the alcohols; it is modulated by the configuration and constitution of the diamines, as shown by comparing the effect of Oriyama's catalyst ((S)‐ 1 and (R)‐ 1 ), N,N,N′,N′‐tetramethylethylenediamine (TMEDA), N,N,N′,N′‐tetraethylethylenediamine (TEEDA), Et₃N, and EtNMe₂. The effect of the catalysts on the reactivity is impaired by their steric hindrance. In agreement with the modest enantioselectivity of the mono‐ and dibenzoylation of rac‐cyclohexane‐1,2‐diol in the presence of Oriyama's catalyst, the influence of these diamines on the regioselectivity is rather limited. While associated with procedural simplicity, these catalysts lead, in a few cases, to higher yields of a single benzoate than established methods, viz. in the preparation of the 3‐O‐benzoyl β‐D ‐glucopyranoside 4 , the 2‐O‐benzoyl α‐D ‐galactopyranoside 22 , the 3‐O‐benzoyl α‐D ‐galactopyranoside 23 , and the benzylidenated 2‐O‐benzoyl α‐D ‐galactopyranoside 44 . The regioselective benzoylation of the benzylidenated β‐D ‐mannopyranoside 47 , leading to 48 , appears to be new.     

Pd(OAc)2@SBA‐15/PrEn nanoreactor: a highly active,reusable and selective phosphine‐free catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous media

A series of ordered mesoporous organic–inorganic hybrid material was designed by using the amine‐functionalized SBA‐15 (PdX₂@SBA‐15/N_Y, Y = 1, 2) as solid support for palladium complexes. Among them, the Pd(OAc)₂/ethylenediamine complex encapsulated into SBA‐15 (Pd(OAc)₂@SBA‐15/PrEn or Pd(OAc)₂@SBA‐15/PrNHEtNH₂) exhibits higher activity and selectivity toward Suzuki cross‐coupling reaction under aerobic conditions and water solvent mixture. The SBA‐15/PrEn supported palladium pre‐catalyst could be separated easily from reaction products and used repetitively several times, showing its superiority over homogeneous catalysts for industrial and chemical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.     

Substitution of ligands in dichloro-2-(arylazo)heterocyclepalladium(II) by 8-quinolinol: kinetics and mechanistic studies

Nucleophilic substitutions of Pd(N,N)Cl₂[(N,N = 1-methyl-2-(arylazo)imidazole (RaaiMe), p-RC₆H₄N=NC₃H₂NN-1-Me; 2-(arylazo)pyridine (Raap), p-RC₆H₄N=NC₅H₄N; 2-(arylazo)pyrimidine (Raapm), p-RC₆H₄N=NC₄H₃N₂ where R = H (a), Me (b), Cl (c)] with 8-quinolinol (HQ) have been examined by spectrophotometry at 298 K in MeCN solution. The product, Pd(Q)₂, has also been confirmed by independent synthesis from Na₂[PdCl₄] and HQ in EtOH. The kinetics of the reaction have been studied under pseudo-first-order conditions and the analyses support a nucleophilic association path. A single phase reaction has been observed and follows the rate law, rate = a + k [Pd(N,N)Cl₂] [HQ]². Thus, the reaction is first order in [Pd(N,N)Cl₂] and second order in [HQ]. External addition of Cl^–(LiCl) suppresses the rate. The rate increases as follows: Pd(RaaiMe)Cl₂ < Pd(Raap)Cl₂ < Pd(Raapm)Cl₂.     

Lewis‐Base Stabilized N‐Silver(I) Succinimide Complexes: Synthesis,Crystal Structures and Their Use as CVD‐Precursors

Four Lewis‐base stabilized N‐silver(I) succinimide complexes of type [L_n·R_m·AgNC₄H₄O₂] (L = N,N,N′,N′‐tetramethylethylenediamine (TMEDA), n = 1, m = 0, 2a ; L = P(OEt)₃, n = 2, m = 0, 2b ; L = PPh₃, m = 0, n = 2, 2c ; L = P(OMe)₃, R = TMEDA, n = 1, m = 1, 2d ) were prepared by a “one‐pot” synthesis methodology and characterized. The molecular structures of 2a and 2c have been determined by using X‐ray single crystal analysis. Complex 2a exists as ion pair {[Ag(TMEDA)₂]⁺[Ag(NC₄H₄O₂)₂]^–} in the solid state and complex 2c is a monomer with the three‐coordinate silver atom. Complex 2b was used as precursor in the deposition of silver for the first time by using MOCVD technique. The silver films obtained were characterized using scanning electron microscopy (SEM) and energy‐dispersion X‐ray analysis (EDX). SEM and EDX studies show that the dense and homogeneous silver films could be obtained.     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Synthese und Struktur der Komplexe [(n‐Bu)4N]2[{(THF)Cl4Re≡N}2PdCl2], [Ph4P]2[(THF)Cl4Re≡N‐PdCl(μ‐Cl)]2 und [(n‐Bu)4N]2[Pd3Cl8]

Synthesis and Crystal Structure of the Complexes [(n‐Bu)₄N]₂[{(THF)Cl₄Re≡N}₂PdCl₂], [Ph₄P]₂[(THF)Cl₄Re≡N‐PdCl(μ‐Cl)]₂ and [(n‐Bu)₄N]₂[Pd₃Cl₈] The threenuclear complex [(n‐Bu)₄N]₂[{(THF)Cl₄Re≡N}₂ PdCl₂] ( 1 ) is obtained in THF by the reaction of PdCl₂(NCC₆H₅)₂ with [(n‐Bu)₄N][ReNCl₄] in the molar ration 1:2. It forms orange crystals with the composition 1· THF crystallizing in the monoclinic space group C2/c with a = 2973.3(2); b = 1486.63(7); c = 1662.67(8)pm; β = 120.036(5)° and Z = 4. If the reaction is carried out with PdCl₂ instead of PdCl₂(NCC₆H₅)₂, orange crystals of hitherto unknown [(n‐Bu)₄N]₂[Pd₃Cl₈] ( 3 ) are obtained besides some crystals of 1· THF. 3 crystallizes with the space group P1¯ and a = 1141.50(8), b = 1401.2(1), c = 1665.9(1)pm, α = 67.529(8)°, β = 81.960(9)°, γ = 66.813(8)° and Z = 2. In the centrosymmetric complex anion [{(THF)Cl₄Re≡N}₂PdCl₂]^2— a linear PdCl₂ moiety is connected in trans arrangement with two complex fragments [(THF)Cl₄Re≡N]^— via asymmetric nitrido bridges Re≡N‐Pd. For Pd(II) thereby results a square‐planar coordination PdCl₂N₂. The linear nitrido bridges are characterized by distances Re‐N = 163.8(7)pm and Pd‐N = 194.1(7)pm. The crystal structure of 3 contains two symmetry independent, planar complexes [Pd₃Cl₈]^2— with the symmetry 1¯, in which the Pd atoms are connected by slightly asymmetric chloro bridges. By the reaction of equimolar amounts of [Ph₄P][ReNCl₄] and PdCl₂(NCC₆H₅)₂ in THF brown crystals of the heterometallic complex, [Ph₄P]₂[(THF)Cl₄Re≡N‐PdCl(μ‐Cl)]₂ ( 2 ) result. 2 crystallizes in the monoclinic space group P2₁/n with a = 979.55(9); b = 2221.5(1); c = 1523.1(2)pm; β = 100.33(1)° and Z = 2. In the central unit ClPd(μ‐Cl)₂PdCl of the centrosymmetric anionic complex [(THF)Cl₄Re≡N‐PdCl(μ‐Cl)]₂^2— the coordination of the Pd atoms is completed by two nitrido bridges Re≡N‐Pd to nitrido complex fragments [(THF)Cl₄Re≡N]^— forming a square‐planar arrangement for Pd(II). The distances in the linear nitrido bridges are Re‐N = 163.8(9)pm and Pd‐N = 191.5(9)pm.     

Ethyl 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylates by a tandem addition‐elimination‐SNAr reaction

The ethyl 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylate ring structure, important in several drug compounds, has been prepared in two steps from ethyl 2‐(2‐fluorobenzoyl)acetate. Treatment of this β‐ketoester with N,N‐dimethylformamide dimethyl acetal gives a 97% yield of the 2‐dimethylaminomethylene derivative. Reaction of this β‐enaminone with primary amines in N,N‐dimethylformamide at 140°C for 48 h then affords the 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylate esters in 60–74% yields by a tandem addition‐elimination‐S_NAr reaction. The synthesis of the starting material as well as procedural details and a mechanistic scenario are presented. J. Heterocyclic Chem., (2011).     

Mononuclear and heterobimetallic palladium(II) and platinum(II) complexes containing the mixed ligands <Emphasis Type="Italic">N</Emphasis>-(2-pyridyl or 2-pyrimidyl) acetamide and tertiary diphosphine

Palladium(II) and platinum(II) complexes containing mixed ligands N-(2-pyridyl)acetamide (AH) or N-(2-pyrimidyl)acetamide (BH) and the diphosphines Ph₂P(CH₂) _n PPh₂, (n = 1, 2 or 3) have been prepared. The prepared complexes [Pd(A)₂(diphos)] or [Pd(B)₂(diphos)] have been used effectively to prepare bimetallic complexes of the type [(diphos)Pd(μ-L)₂M′Cl₂] where M′ = Co, Cu, Mn, Ni, Pd, Pt or SnCl₂; L = A or B. The prepared complexes were characterized by elemental analysis magnetic susceptibility, i.r. and UV–Vis spectral data. ³¹P–{¹H}-n.m.r. data have been applied to characterize the produced linkage isomers.     

Deprotonative Metalation of Substituted Benzenes and Heteroaromatics Using Amino/Alkyl Mixed Lithium–Zinc Combinations

Different homoleptic and heteroleptic lithium–zinc combinations were prepared, and structural elements obtained on the basis of NMR spectroscopic experiments and DFT calculations. In light of their ability to metalate anisole, pathways were proposed to justify the synergy observed for some mixtures. The best basic mixtures were obtained either by combining ZnCl₂ ? TMEDA (TMEDA=N,N,N′,N′‐tetramethylethylenediamine) with [Li(tmp)] (tmp=2,2,6,6‐tetramethylpiperidino; 3 equiv) or by replacing one of the tmp in the precedent mixture with an alkyl group. The reactivity of the aromatic lithium zincates supposedly formed was next studied, and proved to be substrate‐, base‐, and electrophile‐dependent. The aromatic lithium zincates were finally involved in palladium‐catalyzed cross‐coupling reactions with aromatic chlorides and bromides.