Electrochemical Studies for the Interaction of DNA with an Irreversible Redox Compound – Hoechst 33258

An electrochemical equation suitable for examining the interaction of irreversible redox compounds with DNA is established. According to the equation, diffusion coefficients of both free and binding compounds (D_f , D_b), binding constant (K) and binding site size (s) of compounds with DNA could be obtained simultaneously by nonlinear fit analysis of electrochemical data. Bis‐benzimidazole derivative (Hoechst 33258), as an irreversible redox compound, was investigated for its electrochemical behavior and the interaction with natural fish sperm DNA (fsDNA) using cyclic voltammetry, chronocoulometry, bulk electrolysis and scanning electrochemical microscope technique. A nonlinear fit analysis of the experimental data yielded: D_f=8.3×10^?5 cm² s^?1, D_b=6.0×10^?6 cm² s^?1, K=2.1×10⁸ cm³ mol^?1, s=3.9. The overall results suggest that Hoechst 33258 binds tightly to the minor groove of fsDNA and covers four base pairs.     

Electrochemical Oxidation of Berberine and of Its Oxidation Products at a Glassy Carbon Electrode

The electrochemical behavior of berberine, an isoquinoline plant alkaloid with a wide spectrum of physiological effects, was studied at a glassy carbon electrode using cyclic, differential pulse and square‐wave voltammetry. The oxidation of berberine is a quasireversible, diffusion‐controlled process and occurred in a cascade mechanism with the formation of several oxidation products. The diffusion coefficient of berberine was calculated from cyclic voltammetry studies to be D=1.69×10^?6 cm² s^?1. The oxidation process of berberine is also pH dependent and the number of electrons and protons transferred was determined using differential pulse voltammetry. The formation of several oxidation products that adsorbed at the glassy carbon electrode surface was observed and their electrochemical behavior characterized. A mechanism for the oxidation of berberine at a glassy carbon electrode was proposed.     

Electrochemical Redox Behavior of Omeprazole Using a Glassy Carbon Electrode

The electrochemical redox behavior of omeprazole (OMZ), a gastric acid pump inhibitor, was investigated at a glassy carbon electrode using cyclic, differential pulse and square‐wave voltammetry over a wide pH range. The pH‐dependent oxidation occurs in two irreversible consecutive charge transfer reactions. Adsorption of the nonelectroactive product was also observed. The first oxidation involves removal of one electron, followed by deprotonation and leads to the formation of a hydroxylated species. The second oxidation process is related to the hydroxyl and amino groups in the benzimidazole moiety. The reduction is irreversible, also pH‐dependent, and occurs in a single step at the sulfoxide group in a diffusion‐controlled mechanism. The diffusion coefficient of omeprazole was calculated to be D_OMZ=2.31×10^?6 cm² s^?1.     

Sensitive Electrochemical Determination of Catechol with a Graphene Modified Carbon Ionic Liquid Electrode

In this paper a graphene (GR) modified carbon ionic liquid electrode (CILE) was fabricated and used as the voltammetric sensor for the sensitive detection of catechol. Due to the specific physicochemical characteristics of GR such as high surface area, excellent conductivity and good electrochemical properties, the modified electrode exhibits rapid response and strong catalytic activity with high stability toward the electrochemical oxidation of catechol. A pair of well‐defined redox peaks appeared with the anodic and the cathodic peak potential located at 225 mV and 133 mV (vs.SCE) in pH 6.5 phosphate buffer solution, respectively. Electrochemical behaviors of catechol on the GR modified CILE were carefully investigated and the electrochemical parameters were calculated with the results of the electrode reaction standard rate constant (k_s) as 1.24 s^?1, the charge transfer coefficient (α) as 0.4 and the electron transfer number (n) as 2. Under the selected conditions the differential pulse voltammetric peak current increased linearly with the catechol concentrations in the range from 1.0 × 10^‐7 to 7.0 × 10^?4mol L‐1 with the detection limit as 3.0 × 10^?8mol L‐1 (3σ). The proposed method was further applied to the synthetic waste water samples determination with satisfactory results     

Fabrication and Electrochemical Behavior of Hemoglobin Modified Carbon Ionic Liquid Electrode

A new hemoglobin (Hb) and room temperature ionic liquid modified carbon paste electrode was constructed by mixing Hb with 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) and graphite powder together. The Hb modified carbon ionic liquid electrode (Hb‐CILE) was further characterized by FT‐IR spectra, scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Hb in the carbon ionic liquid electrode remained its natural structure and showed good direct electrochemical behaviors. A pair of well‐defined quasireversible redox peaks appeared with the apparent standard potential (E′) as ?0.334 (vs. SCE) in pH 7.0 phosphate buffer solution (PBS). The electrochemical parameters such as the electron transfer number (n), the electron transfer coefficient (α) and the heterogeneous electron transfer kinetic constant (k_s) of the electrode reaction were calculated with the results as 1.2, 0.465 and 0.434 s^?1, respectively. The fabricated Hb‐CILE exhibited excellent electrocatalytic activity to the reduction of H₂O₂. The calibration range for H₂O₂ quantitation was between 8.0×10^?6 mol/L and 2.8×10^?4 mol/L with the linear regression equation as I_ss (μA)=0.12 C (μmol/L)+0.73 (n=18, γ=0.997) and the detection limit as 1.0×10^?6 mol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) of Hb in the modified electrode was estimated to be 1.103 mmol/L. The surface of this electrochemical sensor can be renewed by a simple polishing step and showed good reproducibility.     

Electrochemical Study on the Interaction of Irinotecan with Calf Thymus Double Stranded DNA

Voltammetric behavior of Irinotecan (CPT‐11) was studied in a phosphate buffer (0.002 mol·L^?1, pH 7.5) solution at the hanging mercury drop electrode (HMDE) using cyclic voltammetry (CV). CPT‐11 showed two irreversible cathodic peaks at ?1.01 V and ?1.09 V which involved two electrons and two protons in each reduction step. In addition, the interaction of Irinotecan with double‐stranded calf thymus DNA (ds‐DNA) was studied by CV at the HMDE employing an irreversible electrochemical equation. As a result of the reaction with ds‐DNA, the reduction peaks related to CPT‐11 were shifted in a negative direction and the peak currents were decreased. The diffusion coefficients of CPT‐11 in the absence (D_f) and presence (D_b) of ds‐DNA were calculated as 2.8×10^?5 cm²·s^?1 and 1.6×10^?5 cm²·s^?1 respectively. The binding constant (K=1.0×10⁴ L·mol^?1), and binding site size (s=0.60) of CPT‐11 interacting with ds‐DNA were obtained simultaneously by non‐linear fit analysis. The results demonstrate that the main interaction mode of CPT‐11 with ds‐DNA is electrostatic.     

Electrochemical Behaviors of Adenosine‐5′‐triphosphate on Molecular Wire Modified Carbon Paste Electrode and Its Sensitive Detection

A new electrochemical method was proposed for the determination of adenosine‐5′‐triphosphate (ATP) based on the electrooxidation at a molecular wire (MW) modified carbon paste electrode (CPE), which was fabricated with diphenylacetylene (DPA) as the binder. A single well‐defined irreversible oxidation peak of ATP appeared on MW‐CPE with adsorption‐controlled process and enhanced electrochemical response in a pH 3.0 Britton‐Robinson buffer solution, which was due to the presence of high conductive DPA in the electrode. The electrochemical parameters of ATP were calculated with the electron transfer coefficient (α) as 0.54, the electron transfer number (n) as 1.9, the apparent heterogeneous electron transfer rate constant (k_s) as 2.67 × 10^?5 s^?1 and the surface coverage (Γ_T) as 4.15 × 10^?10 mol cm^?2. Under the selected conditions the oxidation peak current was proportional to ATP concentration in the range from 1.0 × 10^?7 mol L^?1 to 2.0 × 10^?3 mol L^?1 with the detection limit as 1.28 × 10^?8 mol L^?1 (3σ) by sensitive differential pulse voltammetry. The proposed method showed good selectivity without the interferences of coexisting substances and was successful applied to the ATP injection samples detection.     

Voltammetric Behavior of Antileukemia Drug Glivec. Part I – Electrochemical Study of Glivec

The electrochemical behavior of the antileukemia drug glivec was investigated at a glassy carbon electrode (GCE). The oxidation is a complex, pH‐dependent, irreversible electrode process involving the transfer of 2 electrons and 2 protons and the formation of an electroactive product, P_glivec, which strongly adsorbs on the GCE surface and undergoes reversible oxidation. The adsorption of P_glivec at the GCE surface yields a compact monolayer that inhibits further oxidation of glivec. The electrochemical reduction is a simple pH dependent irreversible process involving the transfer of 2 electrons and 2 protons and occurs with the formation of a nonelectroactive product. The diffusion coefficient of glivec was calculated to be D_O=7.35×10^?6 cm² s^?1 in pH 4.5 0.1 M acetate buffer.     

Application of a 1‐benzyl‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole/carbon nanotube modified glassy carbon electrode for voltammetric determination of hydrazine in water samples

The electrochemical behaviour of hydrazine at a 1‐benzyl‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole‐triazole/carbon nanotube modified glassy carbon electrode has been studied. The modified electrode shows an excellent electrocatalytic activity for the oxidation of hydrazine and accelerates electron transfer rate. The electrocatalytic current increases linearly with hydrazine concentration in the range 0.5–700.0 μm and the detection limit for hydrazine was 33.0 ± 2.0 nm . The diffusion coefficient (D = 2.5 ± 0.1 × 10^?5 cm² s^?1) and kinetic parameters such as the electron transfer coefficient, (α = 0.52) and the heterogeneous rate constant (k′ = 5.5 ± 0.1 × 10^?3 cm s^?1) for hydrazine were determined using electrochemical approaches. Finally, the method was employed for the determination of hydrazine in water samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Ionic Liquid as an Alternative Greener Sensing Medium for the Chemical Warfare Agent

Greener electrochemical detection method developed for chemical warfare agent (CWA) nitrogen mustard‐2 (NM‐2) using room temperature ionic liquid (RTIL). The diffusion coefficient calculated for NM‐2 in acetonitrile and RTIL was 1.57×10^?4 cm²/s and 1.82×10^?10 cm²/s, respectively. NM‐2 addition to RTIL enhanced RTIL conductivity. Moreover, heterogeneous rate constant (0.192 s^?1), transfer coefficient (0.231) and the number of electron involved (1.0) were deduced for NM‐2 in RTIL. The calibration plot showed linearity between 2.94×10^?5 and 1.17×10^?3 M with detection limit 1.47 ×10^?5 M (S/N=3). The large number of available RTIL can be used for greener detection of toxic CWAs.     

Electrochemical reduction of ytterbium in perchloric media

The electrochemical behavior of Yb³⁺ in perchloric media was studied by cyclic voltammetry and current reversal chronopotentiometry at several temperatures. The results show that the reversible electrochemical reduction of Yb³⁺ is followed by homogeneous reactions. The experimentally determined diffusion coefficients of ytterbic ion are 0.41×10^?5, 0.48×10^?5 and 0.53×10^?5 cm² s^?1 at 4.2, 9.2 and 14.7°C, respectively, in 0.5 M NaClO₄ solutions. From these data a value of 16 kJ mol^?1 (3830 cal mol^?1) was obtained for the activation energy for diffusion of ytterbic ion. From the activation energy the diffusion coefficient of ytterbic ion at 25.0°C was estimated. The value of 0.67×10^?5 cm² s^?1 was obtained. In all the experiments the initial pH was maintained at 4.1.     

Nanostructured Cobalt(II) Tetracarboxyphthalocyanine Complex Supported Within the MWCNT Frameworks: Electron Transport and Charge Storage Capabilities

The electrochemical redox properties of a surface‐confined thin solid film of nanostructured cobalt(II) tetracarboxyphthalocyanine integrated with multiwalled carbon nanotube (nanoCoTCPc/MWCNT) have been investigated. This novel nanoCoTCPc/MWCNT material was characterized using SEM, TEM, zeta analysis and electrochemical methods. The nanoCoTCPc/MWCNT nanohybrid material exhibited an extra‐ordinarily high conductivity (15 mS cm^?1), which is more than an order of magnitude greater than that of the MWCNT‐SO₃H (527 µS cm^?1) and three orders of a magnitude greater than the nanoCoTCPc (4.33 µS cm^?1). The heterogeneous electron transfer rate constant decreases as follows: nanoCoTCPc/MWCNT (k_app≈19.73×10^?3 cm s^?1)>MWCNT‐SO₃H (k_app≈11.63×10^?3 cm s^?1)>nanoCoTCPc (k_app≈1.09×10^?3 cm s^?1). The energy‐storage capability was typical of pseudocapacitive behaviour; at a current density of 10 µA cm^?2, the pseudocapacitance decreases as nanoCoTCPc/MWCNT (3.71×10^?4 F cm^?2)>nanoCoTCPc (2.57×10^?4 F cm^?2)>MWCNT‐SO₃H (2.28×10^?4 F cm^?2). The new nanoCoTCPc/MWCNT nanohybrid material promises to serve as a potential material for the fabrication of thin film electrocatalysts or energy‐storage devices.     

A laser flash photolysis/IR diode laser absorption study of the reaction of chlorine atoms with selected alkanes

A high‐resolution IR diode laser in conjunction with a Herriot multiple reflection flow‐cell has been used to directly determine the rate coefficients for simple alkanes with Cl atoms at room temperature (298 K). The following results were obtained: k(Cl + n‐butane) = (1.91 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐pentane) = (2.46 ± 0.12) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + iso‐pentane) = (1.94 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + neopentane) = (1.01 ± 0.05) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐hexane) = (3.44 ± 0.17) × 10^?10 cm³ molecule^?1 s^?1 where the error limits are ±1σ. These values have been used in conjunction with our own previous measurements on Cl + ethane and literature values on Cl + propane and Cl + iso‐butane to generate a structure activity relationship (SAR) for Cl atom abstraction reactions based on direct measurements. The resulting best fit parameters are k_p = (2.61 ± 0.12) × 10^?11 cm³ molecule^?1 s^?1, k_s = (8.40 ± 0.60) × 10^?11 cm³ molecule^?1 s^?1, k_t = (5.90 ± 0.30) × 10^?11 cm³ molecule^?1 s^?1, with f( ? CH₂^? ) = f (? CH₂^? ) = f (?C?) = f = 0.85 ± 0.06. Tests were carried out to investigate the potential interference from production of excited state HCl(v = 1) in the Cl + alkane reactions. There is some evidence for HCl(v = 1) production in the reaction of Cl with shape n‐hexane. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 34: 86–94, 2002     

Electrocatalytic Determination of Ascorbic Acid at the Surface of 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one Modified Carbon Paste Electrode

A chemically modified carbon paste electrode with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one (2,7‐BFEFMCPE) was employed to study the electrocatalytic oxidation of ascorbic acid in aqueous solution using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The diffusion coefficient (D=1.89×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient, α (=0.42) of ascorbic acid oxidation at the surface of 2,7‐BFEFMCPE was determined using electrochemical approaches. It has been found that under an optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 300 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak currents show a linear dependence on the ascorbic acid concentration and linear analytical curves were obtained in the ranges of 8.0×10^?5 M–2.0×10^?3 M and 3.1×10^?5 M–3.3×10^?3 M of ascorbic acid with correlation coefficients of 0.9980 and 0.9976 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2δ) were determined to be 2.9×10^?5 M and 9.0×10^?6 M with cyclic voltammetry and differential pulse voltammetry, respectively. This method was also examined for determination of ascorbic acid in pharmaceutical preparations.     

Electrochemical Oxidation of Methionine Mediated by a Fullerene‐C60 Modified Gold Electrode

The usefulness of a C₆₀‐fullerene modified gold (Au) electrode in mediating the oxidation of methionine in the presence of potassium ions electrolyte has been demonstrated. During cyclic voltammetry, an oxidation peak of methionine appearing at +1.0 V vs. Ag/AgCl was observed. The oxidation current of methionine is enhanced by about 2 times using a C₆₀ modified gold electrode. The current enhancement is significantly dependent on pH, temperature and C₆₀ dosage. Calibration plot reveals linearity of up to 0.1 mM with a current sensitivity of close to 50 mA L mol^?1 and detection limit of 8.2×10^?6 M. The variation of scan rate study shows that the system undergoes diffusion‐controlled process. Diffusion coefficient and rate constant of methionine were determined using hydrodynamic method (rotating disk electrode) with values of 1.11×10^?5 cm² s^?1 and 0.0026 cm s^?1 respectively for unmodified electrode while the values of diffusion coefficient and rate constant of methionine using C₆₀ modified Au electrode are 5.7×10^?6 cm² s^?1 and 0.0021 cm s^?1 respectively.     

Direct Electrochemistry of Glucose Oxidase Immobilized on Titanium Carbide‐Au Nanoparticles‐Fullerene C60 Composite Film and Its Biosensing for Glucose

The direct electrochemistry of glucose oxidase (GOD) immobilized on the designed titanium carbide‐Au nanoparticles‐fullerene C₆₀ composite film modified glassy carbon electrode (TiC‐AuNPs‐C₆₀/GCE) and its biosensing for glucose were investigated. UV‐visible and Fourier‐transform infrared spectra of the resulting GOD/TiC‐AuNPs‐C₆₀ composite film suggested that the immobilized GOD retained its original structure. The direct electron transfer behaviors of immobilized GOD at the GOD/TiC‐AuNPs‐C₆₀/GCE were investigated by cyclic voltammetry in which a pair of well‐defined, quasi‐reversible redox peaks with the formal potential (E^0′) of ‐0.484 V (vs. SCE) in phosphate buffer solution (0.05 M, pH 7.0) at the scan rate of 100 mV·s^?1 were obtained. The proposed GOD modified electrode exhibited an excellent electrocatalytic activity to the reduction of glucose, and the currents of glucose reduction peak were linearly related to glucose concentration in a wider linearity range from 5.0 × 10^?6 to 1.6 × 10^?4 M with a correlation coefficient of 0.9965 and a detection limit of 2.0 × 10^?6 M (S/N = 3). The sensitivity and the apparent Michaelis‐Menten constant (K_M^app) were determined to be 149.3 μA·mM^?1·cm^?2 and 6.2 × 10^?5 M, respectively. Thus, the protocol will have potential application in studying the electron transfer of enzyme and the design of novel electrochemical biosensors.     

Electrochemical Oxidation at a Glassy Carbon Electrode of the Anti‐Arrhythmia Drug Disopyramide

Abstract

A voltammetric study of the oxidation of disopyramide has been carried out using a glassy carbon electrode. The electrochemical oxidation of disopyramide was investigated by cyclic, differential pulse, and square wave voltammetry. The oxidation of disopyramide is an irreversible, diffusion‐controlled process. The diffusion coefficient of disopyramide was calculated in pH 7.0 phosphate buffer to be D _disopyramide=3.8×10^?6 cm² s^?1. The oxidation of disopyramide is also pH dependent and for electrolytes with pH between 4 and 7 occurs with the transfer of one electron and one proton. In alkaline electrolytes, two consecutive charge transfer reactions are observed: both oxidation reactions involve the transfer of two electrons but only the first also involves the transfer of two protons. Two procedures for the analytical determination of disopyramide in pH 7.0 phosphate buffer were developed and compared and a detection limit LOD=1.27 µM was obtained.     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

Electrochemical Determination of Oxalate at Pyrolytic Graphite Electrodes

The electrocatalytic oxidation of oxalate at several carbon based electrodes including basal plane (BPPG) and edge plane (EPPG) pyrolytic graphite and glassy carbon (GC) electrode, was studied. The electrodes were examined for the sensing of oxalate ions in aqueous solutions and all three electrodes showed a response to oxalate additions. The peak of oxalate oxidation at BPPG electrode appeared at lower potential, +1.13 V vs. SCE, than at EPPG (+1.20 V vs. SCE) and GC electrode (+1.44 V vs. SCE). Oxalate oxidation at BPPG electrode was studied in more details for response characteristics (potential and current), effects of pH, temporal characteristics of response potential and current. The results indicated that oxalate oxidation proceeds as two‐electron process at the BPPG electrode with a transfer coefficient β and a diffusion coefficient D evaluated to be 0.45 and 1.03 (±0.04)×10^?5 cm² s^?1 respectively. The BPPG electrode was found to be suitable for oxalate determination in aqueous media showing linear response to oxalate concentration with a sensitivity of 0.039 AM^?1 and a limit of detection of 0.7 μM.     

Electrocatalysis and Voltammetric Determination of Dopamine at a Calix[4]arene Crown‐4 Ether Modified Glassy Carbon Electrode

A sensitive and selective electrochemical method for the determination of dopamine (DA) was developed using a calix[4]arene crown‐4 ether (CACE) film modified glassy carbon electrode (GCE).The modified electrode exhibited good electrocatalytic activity for electrochemical oxidation of DA in the pH 6.00 Britton–Robinson buffer solution, and ascorbic acid (AA) did not interfere with it. The diffusion coefficient (D=2.7×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient (α=0.54) of DA at the surface of CACE were determined using electrochemical approaches. The catalytic oxidation peak currents showed a linear dependence on the DA concentration and a linear analytical curve was obtained in the range of 2.0×10^?5–1.0×10^?3 M of DA with a correlation coefficient of 0.9990. The detection limit (S/N=3) was estimated to be 3.4×10^?6 M. This method was also examined for the determination of DA in an injection sample. In addition, effects of possible interferences were investigated. The present work shows the potential of the proposed method for the fabrication of a modified electrode, as it can be effectively used for voltammetric detection of DA.