Bioactive Hydrogel Layers on Microdisk Electrode Arrays: Cyclic Voltammetry Experiments and Simulations

Poly(hydroxyethylmethacrylate)‐based hydrogel membranes were applied to microfabricated, microdisk electrode arrays (MDEAs) of 50 μm (5184 disks), 100 μm (1296 disks) and 250 μm (207 disks) (d/r=4; A= 0.1 cm²) and studied by cyclic voltammetry (CV) in 1.0 mM ferrocene monocarboxylic acid (FcCO₂H). The membrane produced an order of magnitude decrease in current densities and a shift to quasi reversibility due to a decrease in the D_appt of FcCO₂H, from 4.51×10^?6 cm² s^?1 to 1.42×10^?8 cm² s^?1, (2.18×10^?8 cm² s^?1 from release experiments). The MDEA050 (comprising 50 μm disks) maintained its enhanced current density attributes confirming its value as an effective electrode for biosensors. Finite element modeling (FEM) simulations successfully replicated the voltammograms of the MDEAs.     

Chemical and Biological Sensors Based on Electrochemical Detection Using Conducting Electroactive Polymers

The electrochemical behavior of composites of conducting electroactive polyaniline (PAn) and polypyrrole (PPy) formulated within cross-linked hydrogel networks was investigated by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). Composite PAn gels displayed similar anodic charge density compared to the pristine conducting polymer (80mC/cm² and 84mC/cm², respectively), suggesting a similar degree of electroactivity between the two systems. Composite gels of PAn displayed fast cation transport with K⁺ diffusivity (D_appt= 5.31×10^–7cm²s^–1) that were three orders of magnitude larger than that of pristine PAn (D_appt=3.12×10^–10cm²s^–1), while PPy composite gels showed similar ferrocene anion diffusivity (D_appt=7.05×10^–5cm²s^–1) compared to electropolymerized PPy (D_appt=6.54×10^–5cm²s^–1). The electrochemical interactions between CYP2D6, a cytochrome P450 isoenzyme, and fluoxetine mediated by electroactive polyaniline films on glassy carbon electrodes (GCEs) were investigated. Cyclic voltammograms indicate that PAn is an effective mediator of CYP2D6 activity under anaerobic conditions. An analytical interrogation methodology based on small-amplitude, pulsed DC was developed and incorporated into the Electroconductive Polymer Sensor Interrogation System (EPSIS). Polypyrrole membranes were rendered biospecific by either copolymerization of pyrrole (Py) with 4-(1-pyrrolyl) butyric acid (4PyBA), followed by direct conjugation with 5-(biotinamido)pentyl amine (5BPA), or by reacting 4PyBA with 5BPA to form pyrrolyl-biotin conjugates. The biotinylated PPy was made responsive to glucose or urea by exploiting strong biotin-streptavidin binding to either streptavidin-glucose oxidase or biotin-urease conjugates. These bioactive conducting polymer membranes were demonstrated as conductimetric glucose and urea biosensing layers using the EPSIS. The rate of conductivity of the bioactive PPy membranes was observed to double upon increasing glucose concentration from 100µM (4×10^–6Scm^–1s^–1) to 600µM (9×10^–6Scm^–1s^–1).     

Impedance DNA Biosensor Using Electropolymerized Polypyrrole/Multiwalled Carbon Nanotubes Modified Electrode

In this paper, we present an electrochemical impedance‐based DNA biosensor by using a composite material of polypyrrole (PPy) and multiwalled carbon nanotubes (MWNTs) to modify glassy carbon electrode (GCE). The polymer film was electropolymerized onto GCE by cyclic voltammetry (CV) in the presence of carboxylic groups ended MWNTs (MWNTs‐COOH). Such electrode modification method is new for DNA hybridization sensor. Amino group ended single‐stranded DNA (NH₂‐ssDNA) probe was linked onto the PPy/MWNTs‐COOH/GCE by using EDAC, a widely used water‐soluble carbodiimide for crosslinking amine and carboxylic acid group. The hybridization reaction of this ssDNA/PPy/MWNTs‐COOH/GCE resulted in a decreased impedance, which was attributed to the lower electronic transfer resistance of double‐stranded DNA than single‐stranded DNA. As the result of the PPy/MWNTs modification, the electrode obtained a good electronic transfer property and a large specific surface area. Consequently, the sensitivity and selectivity of this sensor for biosensing DNA hybridization were improved. Complementary DNA sequence as low as 5.0×10^?12 mol L^?1 can be detected without using hybridization marker or intercalator. Additionally, it was found that the electropolymerization scan rate was an important factor for DNA biosensor fabrication. It has been optimized at 20 mV s^?1.     

Electrochemical Studies for the Interaction of DNA with an Irreversible Redox Compound – Hoechst 33258

An electrochemical equation suitable for examining the interaction of irreversible redox compounds with DNA is established. According to the equation, diffusion coefficients of both free and binding compounds (D_f , D_b), binding constant (K) and binding site size (s) of compounds with DNA could be obtained simultaneously by nonlinear fit analysis of electrochemical data. Bis‐benzimidazole derivative (Hoechst 33258), as an irreversible redox compound, was investigated for its electrochemical behavior and the interaction with natural fish sperm DNA (fsDNA) using cyclic voltammetry, chronocoulometry, bulk electrolysis and scanning electrochemical microscope technique. A nonlinear fit analysis of the experimental data yielded: D_f=8.3×10^?5 cm² s^?1, D_b=6.0×10^?6 cm² s^?1, K=2.1×10⁸ cm³ mol^?1, s=3.9. The overall results suggest that Hoechst 33258 binds tightly to the minor groove of fsDNA and covers four base pairs.     

Experimental study of triplet exciton diffusivity in crystalline pyrene at 300 K

Preliminary measurements of the triplet diffusivity tensor in crystalline pyrene at 300 K are reported. Maximum diffusivity occurs along the b axis and D_ab = (1.25 ± 0.3) × 10^?4 cm² s^?1. Diffusion in the ac′ plane is nearly isotropic with D ≈ (0.3 ± 0.1) × 10^?4 cm² s^?1. These results are tentatively interpreted as diffusion dominated by nonlocal scattering.     

Synthesis and Characterization of Polyvinylferrocene/Polypyrrole Composites

Conducting polymer composites of polyvinylferrocene and polypyrrole (PVF/PPy) were synthesized chemically by the in situ polymerization of pyrrole in the presence of PVF using FeCl₃ as oxidant. Acetic (CH₃COOH) and boric (H₃BO₃) acids were used as the synthesis medium. Effects of the synthesis medium on the properties of the PVF/PPy composite were investigated. The PVF/PPy composites and homopolymers were characterized by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and magnetic susceptibility techniques. Conductivity measurements were performed using the four‐probe technique. We found that the conductivities of PVF/PPy‐H₃BO₃ (1.19 S cm^?1) and PVF/PPy‐CH₃COOH (4.5×10^?1 S cm^?1) increased relative to those of the homopolymers of PPy‐H₃BO₃ (2.1×10^?2 S cm^?1) and PPy‐CH₃COOH (1.2×10^?2 S cm^?1) due to the interaction of PVF with the pyrrole moiety. The stability of all homopolymers and composites were investigated by thermogravimetric analysis and by conductivity measurements during heating‐cooling cycles. There was a small drop in conductivity caused by the annealing of PVF/PPy composites at 70°C. The conductivity of all samples increased with temperature and exhibited stable electrical behavior with increasing temperature. TGA analysis of samples showed that the composites were more stable than the homopolymers or PVF separately. The magnetic susceptibility values of samples were negative, except for PVF/PPy‐H₃BO₃. Morphology changes of the composites investigated by scanning electron microscopy (SEM), attributed to synthesis conditions, have a significant effect on their conductivity.     

Electrochemical Interrogation and Sensor Applications of Nanostructured Polypyrroles

The polymerization of pyrrole in β‐naphthalene sulfonic acid (NSA) gave nanotubules, nanomicelles or nanosheets of polypyrrole (PPy) depending on the amount of NSA in the polymer and the temperature of the reaction. Scanning electron microscopy (SEM) measurements showed that the diameters of the nanostructured polypyrrole‐β‐naphthalene sulfonic acid (PPyNSA) composites were 150–3000 nm for the tubules, 100–150 nm for the micelles and 20 nm for the sheets. A red shift in the UV‐vis absorption spectra of PPy was observed for PPyNSA which indicates the involvement of bulky β‐naphthalene sulfonate ion in the polymerization process. The UV‐vis also showed the existence of polaron and bi‐polaron in the polymer which may be responsible for the improved solubility of PPyNSA compared to PPy. All the characteristic IR bands of polypyrrole were observed in the FTIR spectra of PPyNSA, with slight variation in the absolute values. However, the absence of N? H stretching at 3400 cm^?1 and 1450 cm^?1 usually associated with neutral polypyrrole confirms that the polymer is not in the aromatic state but in the excited polaron and bipolaron defect state. Electrochemical analysis of PPyNSA reveals two redox couples: a/a′ – partly oxidized polypyrrole‐naphthalene sulfonate radical cation/neutral polypyrrole naphthalene sulfonate; b/b′ – fully oxidized naphthalene sulfonate radical cation/partly reduced polypyrrole‐naphthalene sulfonate radical anion. The corresponding formal potentials measured at 5 mV/s, E°′_{(5 mV/s)}, are 181 mV and 291 mV, respectively. Amperometric phenol sensor constructed with PPyNSA on a glassy carbon electrode (GCE) gave a sensitivity of 3.1 mA M^?1 and a dynamic linear range of 0.65–139.5 μM. The data for the determination of phenol on the GCE/PPyNSA electrode was consistent with the electrocatalytic Michaelis‐Menten model, giving an apparent Michaelis‐Menten constant (K_M′) value of 160 μM.     

Electrooxidation and Amperometric Detection of Ascorbic Acid at GC Electrode Modified by Electropolymerization of N,N‐Dimethylaniline

The polymer film of N,N‐dimethylaniline (DMA) is deposited on the electrochemically pretreated glassy carbon (GC) electrode by continuous electrooxidation of the monomer. This poly N,N‐dimethylaniline (PDMA) film‐coated electrode can be used as an amperometric sensor of ascorbic acid (AA). The polymer film (thickness (?): 0.3±0.02 μm) having positive charge in its backbone attracts the anionic species AA. Thus, the anodic peak potential (350 mV vs. Ag|AgCl|NaCl_(sat)) for the oxidation of AA at the bare electrode is largely shifted to the negative value (150 mV) at this electrode. The PDMA film‐coated electrode is stable in acidic, alkaline and neutral media and can sense AA at different pH's. The diffusion coefficients of AA in solution (D) and in film (D_s) were estimated by rotating disk electrode voltammetry: D=(5.5±0.1)×10^?6 cm² s^?1 and D_s=(6.3±0.2)×10^?8, (6.0±0.2)×10^?8 and (4.7±0.2)×10^?8 cm² s^?1 for 0.5, 1.5 and 3.0 mM AA, respectively. A permeability of AA through the PDMA film was found to decrease with increasing the concentration of AA in the solution. In the chronoamperometry, the current response for the oxidation of AA at different times elapsed after potential‐step application is linearly increased with the increase in AA concentration in a wide range of its concentration from 25 μM to 1.65 mM. In the hydrodynamic amperometry, a successive addition of 10 μM AA caused the successive increase in current response with equal amplitude and the sensitivity was calculated as 0.178 μA cm^?2 μM^?1. So, the fouling of the electrode surface caused by the oxidized product of AA is markedly eliminated at this PDMA film‐coated electrode. A flow injection analysis based on the present electrode was performed to estimate the concentration of vitamin C in fruit juice.     

Electro‐optical properties of electropolymerized poly(3‐hexylthiophene)/carbon nanotube composite thin films

3‐hexylthiophene was electropolymerized on a carbon nanotube (CNT)‐laden fluorine‐doped tin oxide substrate. Scanning electron microscopy and Raman spectroscopy revealed that the polymer was infused throughout the thickness of the 150‐nm thick CNT mat, resulting in a conducting composite film with a dense CNT network. The electropolymerized poly(3‐hexylthiophene) (e‐P3HT)/CNT composites exhibited photoluminescence intensity quenching by as much as 92% compared to the neat e‐P3HT, which provided evidence of charge transfer from the polymer phase to the CNT phase. Through‐film impedance and J‐V measurements of the composites gave a conductivity (σ) of 1.2 × 10^?10 S cm^?1 and zero‐field mobility (μ₀) of 8.5 × 10^?4 cm² V^?1 s^?1, both of which were higher than those of neat e‐P3HT films (σ = 9.9 × 10^?12 S cm^?1, μ₀ = 3 × 10^?5 cm² V^?1 s^?1). In electropolymerized samples, the thiophene rings were oriented in the (010) direction (thiophene rings parallel to substrate), which resulted in a broader optical absorbance than for spin coated samples, however, the lack of long‐range conjugation caused a blueshift in the absorbance maximum from 523 nm for unannealed regioregular P3HT (rr‐P3HT) to 470 nm for e‐P3HT. Raman spectroscopy revealed that π‐π stacking in e‐P3HT was comparable to that in rr‐P3HT and significantly higher than in regiorandom P3HT (ran‐P3HT) as shown by the principal Raman peak shift from 1444 to 1446 cm^?1 for e‐P3HT and rr‐P3HT to 1473 cm^?1 for ran‐P3HT. This work demonstrates that these polymer/CNT composites may have interesting properties for electro‐optical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1269–1275, 2011     

In Situ Synthesis of Robust Conductive Cellulose/Polypyrrole Composite Aerogels and Their Potential Application in Nerve Regeneration

Nanostructured conductive polymers can offer analogous environments for extracellular matrix and induce cellular responses by electric stimulation, however, such materials often lack mechanical strength and tend to collapse under small stresses. We prepared electrically conductive nanoporous materials by coating nanoporous cellulose gels (NCG) with polypyrrole (PPy) nanoparticles, which were synthesized in situ from pyrrole monomers supplied as vapor. The resulting NCG/PPy composite hydrogels were converted to aerogels by drying with supercritical CO₂, giving a density of 0.41–0.53 g cm^?3, nitrogen adsorption surface areas of 264–303 m² g^?1, and high mechanical strength. The NCG/PPy composite hydrogels exhibited an electrical conductivity of up to 0.08 S cm^?1. In vitro studies showed that the incorporation of PPy into an NCG enhances the adhesion and proliferation of PC12 cells. Electrical stimulation demonstrated that PC12 cells attached and extended longer neurites when cultured on NCG/PPy composite gels with DBSA dopant. These materials are promising candidates for applications in nerve regeneration, carbon capture, catalyst supports, and many others.     

Optimizing the preparation conditions of polypyrrole electrodes for enhanced electrochemical capacitive performances

Here, we put forward an optimum proposal to prepare high-performance polypyrrole (PPy) electrodes for supercapacitor applications. A detailed study regarding the effects of different preparation conditions including electropolymerized mode, parameter, and current collector on the electrochemical capacitive performances of PPy electrodes is carried out. Fourier transform infrared spectroscopy and X-ray diffraction tests indicate the above preparation conditions have no effect on the component and crystal structure of PPy prepared. Electrochemical measurements manifest a significant effect of current collector on supercapacitive properties of PPy electrodes. Graphite foil as the current collector with low resistance shows remarkably superior capacitive performances compared with FTO-conducting glass and ITO conductive plastic. SEM characterizations show galvanostatically polymerized PPy particles have obviously smaller aggregation degree than potentiostatically polymerized PPy particles, which results in better electrochemical properties for former. Among different preparation conditions, the PPy deposited on graphite foil under galvanostatic mode with 2 mA cm^?2 shows the best electrochemical capacitive properties. The optimized PPy/graphite electrodes show a high specific capacitance of 173.0 mF cm^?2 at 0.2 mA cm^?2, superior rate capability, and outstanding cycling stability (retaining 90.5% of initial capacitance for 5000 cycles).     

Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Singlet exciton interactions in crystalline naphthalene

The decay of prompt fluorescence in crystalline naphthalene at 300 K, excited by a picosecond 266 nm pulse, has been studied as a function of excitation intensity. Experimental decay curves can be fitted only when the exponential distribution in depth of excitation and the radial (gaussian) intensity profile of the excitation are both taken into account. From an analysis of the decay at early time (?5 ns) a best fit value of the singlet—singlet annihilation rate constant is found γ_SS = (4 ± 1) × 10^?10 cm³ s^?1. If the reaction is diffusion-limited, this rate implies an average singlet diffusivity D_S = (2 ± 1) × 10^?4 cm² s^?1.     

Synthesis and characterization of polypyrrole/graphite oxide composite by in situ emulsion polymerization

This work demonstrates a feasible route to synthesize the layered polypyrrole/graphite oxide (PPy/GO) composite by in situ emulsion polymerization in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) as emulsifier. AFM and XRD results reveal that the GO can be delaminated into nanosheets and well dispersed in aqueous solution in the presence of CTAB. The PPy nanowires are formed due to the presence of the lamellar mesostructured (CTA)₂S₂O₈ as a template. The results of the PPy/GO composite indicate the PPy insert successfully into GO interlayers, and the nanofiber‐like PPy are deposited onto the GO surface. Owing to π–π electron stacking effect between the pyrrole ring of PPy and the unoxided domain of GO sheets, the electrical conductivity of PPy/GO composite (5 S/cm) significantly improves in comparison with pure PPy nanowires (0.94 S/cm) and pristine GO (1 × 10^?6 S/cm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1329–1335, 2010     

Bio-smart materials: kinetics of immobilized enzymes in p(HEMA)/p(pyrrole) hydrogels in amperometric biosensors

Various strategies are being pursued to confer the highly specific molecular recognition properties of bioactive molecules to the transducer action of inherently conductive polymers. We have successfully integrated inherently conductive polypyrrole within electrode-supported, UV cross-linked hydroxyethyl methacrylate (HEMA)-based hydrogels. These electroactive composites were used as matrixes for the physical immobilization of several oxidase enzymes to fabricate clinically important biosensors. Measurements were made of the amperometric responses via H₂O₂ oxidation for each biosensor. Apparent Michaelis constants, K_m(app), for glucose oxidase immobilized in p(HEMA) membranes and in p(HEMA)/p(Pyrrole) composite membranes were 13.8 and 43.7 mM respectively compared to 33 mM in solution. The inclusion of polypyrrole in the hydrogel network increased the thermal stability of the immobilized enzyme at 60°C by 30% and 40% compared to p(HEMA) membranes and solution phase respectively. The composite also yielded larger I_max values (19 μA/cm⁻²) for glucose biosensors compared to similar glucose biosensors fabricated without the conducting polymer (15 μA). K_m(app) values for cholesterol oxidase immobilized in the same composite films were ca. three orders of magnitude higher than the K_m for the soluble enzyme. The polypyrrole component is shown to reduce diffusive transport but to confer thermal stability to these biosensors.     

Electrochemical Study on the Interaction of Irinotecan with Calf Thymus Double Stranded DNA

Voltammetric behavior of Irinotecan (CPT‐11) was studied in a phosphate buffer (0.002 mol·L^?1, pH 7.5) solution at the hanging mercury drop electrode (HMDE) using cyclic voltammetry (CV). CPT‐11 showed two irreversible cathodic peaks at ?1.01 V and ?1.09 V which involved two electrons and two protons in each reduction step. In addition, the interaction of Irinotecan with double‐stranded calf thymus DNA (ds‐DNA) was studied by CV at the HMDE employing an irreversible electrochemical equation. As a result of the reaction with ds‐DNA, the reduction peaks related to CPT‐11 were shifted in a negative direction and the peak currents were decreased. The diffusion coefficients of CPT‐11 in the absence (D_f) and presence (D_b) of ds‐DNA were calculated as 2.8×10^?5 cm²·s^?1 and 1.6×10^?5 cm²·s^?1 respectively. The binding constant (K=1.0×10⁴ L·mol^?1), and binding site size (s=0.60) of CPT‐11 interacting with ds‐DNA were obtained simultaneously by non‐linear fit analysis. The results demonstrate that the main interaction mode of CPT‐11 with ds‐DNA is electrostatic.     

Novel preparation of electrically conducting poly (vinyl chloride) by photo-dehydrochlorination from poly (vinyl chloride)/polypyrrole composite film

Polypyrrole (PPy) was deposited electrochemically on a platinum plate from a nitric acid solution of pyrrole. The PVC/PPy composite film was finally obtained by casting poly(vinyl chloride) (PVC) onto the PPy electrode from a tetrahydrofuran solution of PVC. The prepared composite film was irradiated at 90°C with a low-pressure mercury lamp in the stream of hydrogen gas saturated with steam, and the PVC film was dehydrochlorinated, leading to the formation of conjugated polyene. The electrical conductivity (σ) of the PVC film in the irradiated composite film was reveled: σ=2.51 × 10^?5S cm^?1. By iodine doping, σ was further enhanced up to 5.04 X 10^?3 S cm^?1. The tensile strength of the irradiated composite film became larger than that of the original PVC film; i.e., the stress at break was: 461 (composite film); 401 kg cm^?2 (PVC). These results were brought about by the doping of radical species to the conjugated polyene. The anion, NO^?₃, doped during the electrodeposition of PPy was photodecomposed to generate radical NO₂ and this species was doped to the polyene, resulting in the formation of electrically conductive PVC and mechanically improved composite film. © 1994 John Wiley & Sons, Inc.     

Ozone reduction at Nafion modified Au electrode and the measurement of ozone concentration in highly resistive solutions

The mass transport and charge transfer kinetics of ozone reduction at Nafion coated Au electrodes were studied in 0.5 mol/L H2SO4 and highly resistive solutions such as distilled water and tap water. The diffusion coefficient and partition coefficient of ozone in Nafion coating are 1.78×10-6 cm2·s-1 and 2.75 at 25℃ (based on dry state thickness), respectively. The heterogeneous rate constants and Tafel slopes for ozone reduction at bare Au are 4.1×10-6 cm·s-1, 1.0×10-6 cm·s-1 and 181 mV, 207 mV in 0.5 mol/L H2SO4 and distilled water respectively and the corresponding values for Nafion coated Au are 5.5×10-6 cm·s-1, 1.1×10-6 cm·s-1 and 182 mV, 168 mV respectively. The Au microelectrode with 3 μm Nafion coating shows good linearity over the range 0-10 mmol/L ozone in distilled water with sensitivity 61 μA·ppm-1 ·cm-2, detection limit 10 ppb and 95% response time below 5 s at 25℃. The temperature coefficient in range of 11-30℃ is 1.3%.     

A Novel Bioelectrochemical Sensor Based on Immobilized Urease on the Surface of Nickel Oxide Nanoparticle and Polypyrrole Composite Modified Pt Electrode

Nickel oxide nanoparticle (NiO?NP) and polypyrrole (PPy) composite were deposited on a Pt electrode for fabrication of a urea biosensor. To develop the sensor, a thin film of PPy?NiO composite was deposited on a Pt substrate that serves as a matrix for the immobilization of enzyme. Urease was immobilized on the surface of Pt/PPy?NiO by a physical adsorption. The response of the fabricated electrode (Pt/PPy?NiO/Urs) towards urea was analyzed by chronoamperometry and cyclic voltammetry (CV) techniques. Electrochemical response of the bio‐electrode was significantly enhanced. This is due to electron transfer between Ni²⁺ and Ni³⁺ as the electro‐catalytic group and the reaction between polypyrrole and the urease‐liberated ammonium. The fabricated electrode showed reliable and demonstrated perfectly linear response (0.7–26.7 mM of urea concentration, R²= 0.993), with high sensitivity (0.153 mA mM^?1 cm^?2), low detection of limit (1.6 μM), long stability (10 weeks), and low response time (～5 s). The developed biosensor was highly selective and obtained data were repeatable and reproduced using PPy‐NiO composite loaded with immobilized urease as urea biosensors.     

Electroanalytical Performance of (SiPy+Cl−/CuTsPc)5 LbL Film for Detecting Promethazine Hydrochloride

A (SiPy⁺Cl^?/CuTsPc)₅ layer‐by‐layer film was employed for the electroanalytical determination of promethazine hydrochloride in BR buffer pH 5.0 with peaks at 0.48 and 0.79 V. After optimisation of the square‐wave parameters (f=100 s^?1, a=40 mV and ΔE_s=2 mV), the peak at 0.79 V was used for quantification and a detection limit of 8.71×10^?9 mol L^?1 and a quantification limit of 9.31×10^?8 were calculated. The applicability of this procedure was tested on commercial formulations of promethazine hydrochloride by observing the stability, specificity, recovery and precision of the procedure in complex samples, without any preliminary treatment.