Synthesis and chiral recognition ability of optically active poly{N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide} with various tacticities by radical polymerization using Lewis acids

The radical polymerization of an optically active methacrylamide, N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide, was carried out in the absence and presence of Lewis acids such as yittribium trifluoromethanesulfonate [Yb(OTf)₃] and scandium trifluoromethanesulfonate [Sc(OTf)₃]. Catalytic amounts of the Lewis acids significantly affected the stereoregularity of the obtained polymers. The polymerization with Yb(OTf)₃ in tetrahydrofuran afforded isotactic polymers (up to mm = 87%), whereas the conventional radical method without the Lewis acid produced polymers rich in syndiotacticity (up to rr = 88%). The radical polymerization in the presence of MgBr₂ proceeded in a heterotactic‐selective manner (mr = 63%). Thus, the isotactic, syndiotactic, and heterotactic poly(methacrylamide)s were synthesized by the radical processes. The chiral recognition abilities of the obtained optically active poly(methacrylamide)s were affected by the stereoregularity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3354–3360, 2003     

Stereocontrol during the free‐radical polymerization of methacrylates with Lewis acids

The free‐radical polymerizations of methyl methacrylate (MMA), ethyl methacrylate, isopropyl methacrylate, and 2‐methoxyethyl methacrylate were carried out in the presence of various Lewis acids. The MMA polymerization in the presence of scandium trifluoromethanesulfonate [Sc(OTf)₃] in toluene or CHCl₃ produced a polymer with a higher isotacticity and heterotacticity than that produced in the absence of Sc(OTf)₃. Similar effects were observed during the polymerization of the other monomers. ScCl₃, Yb(OTf)₃, Er(OTf)₃, HfCl₄, HfBr₄, and In(OTf)₃ also increased the isotacticity and heterotacticity of the polymers. The effects of the Lewis acids were greater in a solvent with a lower polarity and were negligible in tetrahydrofuran and N,N‐dimethylformamide. Sc(OTf)₃ was also found to accelerate the polymerization of MMA. On the basis of an NMR analysis of a mixture of Sc(OTf)₃, MMA, and poly(methyl methacrylate), the monomer–Sc(OTf)₃ interaction seems to be involved in the stereochemical mechanism of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1463–1471, 2001     

Stereocontrol in radical polymerization of acrylic monomers

A clear effect of Lewis acids, such. as scandium trifluoromethanesulfonate [Sc(OTf)₃], on stereocontrol during the radical polymerization of a designed monomer, benzyl α-(methoxymethyl)acrylate was found. This Lewis acid also influenced the stereochemistry in the radical polymerization of methyl methacrylate giving a less syndiotactic and more isotactic polymer, although many Lewis acids were not effective. A catalytic amount of Lewis acids, such as Y(OTf)₃ and Yb(OTf)₃, also significantly enhanced isotactic-specificity during the radical polymerization of acrylamide and its derivatives, N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide. Obvious solvent and temperature effects on tacticity were observed in these polymerizations, and poly(NIPAM) with >80% triad isotactic content has been obtained in the presence of Lewis acids.     

Iron‐catalyzed radical polymerization of acrylamides in the presence of Lewis acid for simultaneous control of molecular weight and tacticity

This work is directed to the stereospecific living radical polymerization of acrylamides such as N,N‐dimethylacrylamide and N‐isopropylacrylamide with an iron complex and a Lewis acid. DMAM was polymerized with [FeCp(CO)₂]₂ in conjunction with an alkyl iodide [(CH₃)₂C(CO₂Et)I] as an initiator in the presence of Y(OTf)₃ in toluene/methanol (1/1) at 60 °C to be converted almost quantitatively to the polymers with controlled molecular weights and high isotacticity (m > 80%), wherein the Fe‐complex generates radical species from a covalent C? I bond of the dormant species and the Lewis acid controls the stereochemistry of the polymerization via coordination with the amide groups of the polymer terminal and the monomer. A series of Lewis acids were also used for the iron(I)‐catalyzed DMAM polymerization, and Yb(OTf)₃ and Yb(NTf₂)₃ proved effective in giving isotactic polymers without deteriorating the molecular weight control similar to Y(OTf)₃. Furthermore, a slight enhancement of isospecificity was observed for the iron‐catalyzed system in comparison with the α,α‐Azobisisobutyronitrile‐initiated, when coupled with Y(OTf)₃. Stereoblock polymerization of DMAM via a one‐pot reaction was also achieved by just adding the Y(OTf)₃ methanol solution in the course of the polymerization to give atactic‐b‐isotactic poly(DMAM). A similar but slightly lower control in the molecular weight and tacticity was achieved in the polymerization of NIPAM with [FeCp(CO)₂]₂/Y(OTf)₃. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2086–2098, 2006     

Sulfonic acids as water‐soluble initiators for cationic polymerization in aqueous media with Yb(OTf)3

Aqueous sulfonic acids (HOSO₂R; R = CH₃, Ph‐p‐CH₃, and Ph‐p‐NO₂), coupled with a water‐tolerant Lewis acid, ytterbium triflate [Yb(OTf)₃; OTf =  OSO₂CF₃], initiate the cationic suspension polymerization of p‐methoxystyrene (pMOS) in heterogeneous aqueous media. They induce controlled polymerization of pMOS at 30 °C, and the molecular weights of the polymers (weight‐average molecular weight/number‐average molecular weight ∼ 1.7) increase with conversion. These suspension polymerizations are initiated by the entry of sulfonic acid from the aqueous phase into the organic phase and proceed via reversible activation of the sulfonyl terminus by the Lewis acid. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2728–2733, 2000     

Optically active polyacrylamides bearing an oxazoline pendant: Influence of stereoregularity on both chiroptical properties and chiral recognition

Enantiopure acrylamide derivatives, N‐[o‐(4‐methyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl) phenyl]acrylamide (MeOPAM), N‐[o‐(4‐isopropyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl]acrylamide (PrⁱOPAM), and N‐[o‐(4‐phenyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl]acrylamide (PhOPAM), were synthesized and radically polymerized in the presence of rare earth metal trifluoromethanesulfonates (Ln(OTf)₃, Ln = La, Nd, Sm, and Y) to yield corresponding optically active polymers. Among these Lewis acids, Y(OTf)₃ was found to be most effective for increasing the isotactic specificity during the radical polymerizations when using n‐butanol as solvent. Also, the effect of the Lewis acids was significantly influenced by the ratio of Ln(OTf)₃ to monomer. The relationship of both chiroptical property and the chiral recognition with the stereoregularity was then examined for the resulting polymers having various tacticity by spectroscopic techniques such as NMR, fluorescence, and circular dichroism. The results indicated that the polymers rich in isotacticity exhibited a favorable enantioselective discrimination ability toward 1,1′‐bi‐2‐naphthol as evidenced by ¹H NMR study, where the characteristic hydroxyl proton signal was split into two peaks that ascribed respectively to the levo‐ and dextro‐isomer; furthermore, the splitting magnitude was linearly correlated with the diad isotacticity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Reactions of diazo esters with electron-deficient alkenes in the presence of Lewis acids

1,3-Dipolar cycloaddition reaction of diazo esters to electron-deficient dipolarophiles to yield the corresponding 1- or 2-pyrazolines was found to be significantly accelerated with Lewis acids (Yb(OTf)₃, Sc(OTf)₃, GaCl₃, EtAlCl₂). The use of GaCl₃ as the catalyst leads to the acceleration not only of the 1,3-dipolar cycloaddition reaction, but also subsequent insertion of the CHCO₂Me electrophilic fragment of methyl diazoacetate into the N-H bond of 2-pyrazolines formed. Such Lewis acids as SnCl₄, BF₃, TiCl₄, and In(OTf)₃ are not efficient in the described processes, since they rapidly decompose starting diazo compounds.     

Stereocontrol during photo-initiated controlled/living radical polymerization of acrylamide in the presence of Lewis acids

Poly(acrylamide) (PAM) with controlled molecular weight and tacticity was prepared by UV-irradiation-initiated controlled/living radical polymerization in the presence of dibenzyl trithiocarbonate (DBTTC) and Y(OTf)₃. The rapid and facile photo-initiated controlled/living polymerization at ambient temperature led to controlled molecular weight and narrow polydispersity (M_w/M_n = 1.12-1.24) of PAM. The coordination of Y(OTf)₃ with the last two amide groups in the growing chain radical effectively enhanced isotacticity of PAM. The isotactic sequence of dyads (m), triads (mm) and pentads (mmmm) in PAM were 70.32%, 50.95%, and 29.97%, respectively, which were determined by the resonance of methine (CH) groups in PAM under ¹³C NMR experiment. Factors affecting stereocontrol during the polymerization were studied, including the type of Lewis acids, concentration of Y(OTf)₃, and monomer conversion. It is intriguing that the meso tacticity increased gradually with chain propagation and quite higher isotacticity (m = 93.01%, mm = 86.57%) was obtained in the later polymerization stage (conversion 65-85%).     

Diastereoselective addition of α-substituted α-amino-H-phosphinates to imines using Yb(OTf)3 as an efficient Lewis acid catalyst

Diastereoselective addition of α-substituted α-amino-H-phosphinates to imines is described. Among Lewis acids, Yb(OTf)₃ was found to be the best catalyst. α,α′-Diaminophosphinic derivatives were obtained with de's ranging from 10 to 95% in the presence of Yb(OTf)₃ as an efficient Lewis acid catalyst. The reaction proceeded with retention of configuration at the phosphorus atom.     

Stereocontrol during the radical polymerization of methyl methacrylates with combined Lewis acids: Aluminium trichloride (AlCl3) and iron dichloride tetrahydrate

The radical polymerization of methyl methacrylate (MMA) was carried out in the presence of combined Lewis acids of the AlCl₃-FeCl₂ system. Compared with the polymerization produced in the presence of single Lewis acids, AlCl₃ or FeCl₂, the MMA polymerization in the presence of AlCl₃-FeCl₂ composite in CHCl₃ or 1-butanol produced a polymer with a higher isotacticity and in toluene produced a polymer with a much higher isotacticity (mm = 50%). The molecular weight and polydispersity of PMMA in the presence of Lewis acids were similar with those in the absence of Lewis acids, although Lewis acids decelerate the polymerization of MMA. The effects of the Lewis acids were greater in a solvent with a lower polarity. A possible stereocontrol mechanism of the polymerization was proposed. The Lewis acid composite of AlCl₃-FeCl₂ readily formed a complex with growing species. These complexes possessed apparent bulkiness that changes the direction of monomer addition to the growing radical center.     

Stereospecific radical polymerization of optically active (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide catalyzed by Lewis acids

The effects of Lewis acids, namely, rare earth metal trifluoromethanesulfonates, on the radical polymerization of (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide were examined under various conditions. In the absence of Lewis acids, syndiotactic-rich polymers (r = 84%) were obtained, whereas in the presence of a catalytic amount of Lewis acids, the polymerization proceeded in an isotactic-specific manner (m up to 64%). Polymerization solvents strongly influenced the effect of the Lewis acids. The polymerization in n-butyl alcohol showed the highest isotactic selectivity, whereas the polymerization in DMSO showed no isotacticity-enhancing effect. Further increases in the Lewis acid concentration and the polymerization temperature did not produce clear effects on the tacticity of the polymers. The interaction between the monomer and Lewis acids was investigated, and the plausible mechanism of stereocontrol in the radical polymerization of (S)-HPEMA was analyzed based on the Lewis acid-monomer interaction.     

Synthesis of Mannich type products via a three-component coupling reaction

The reactions of alkyl nitriles, acetyl chloride, aldehydes and β-ketoesters or simple ketones was studied for the one-pot synthesis of β-acetamido carbonyl compounds. It was observed that the reaction proceeds in the absence of Lewis acids. However, a Lewis acid catalyzes the reaction and several were tested. It was found that whereas Cu(OTf)₂ is suitable for the coupling of β-ketoesters with aldehydes, Sc(OTf)₃ is the best for ketones. A possible mechanism is proposed based on the isolation and characterization of an intermediate.     

Stereoblock copolymers and tacticity control in controlled/living radical polymerization

Three controlled/living radical polymerization processes, atom transfer radical polymerization (ATRP), reversible addition-fragmentation transfer (RAFT) polymerization, and nitroxide-mediated polymerization (NMP), were investigated for the polymerization of N,N-dimethylacrylamide in the presence of Lewis acids known to enhance isotacticity, such as yttrium trifluoromethanesulfonate (Y(OTf)(3)) and ytterbium trifluoromethanesulfonate (Yb(OTf)(3)). Poly(N,N-dimethylacrylamide) with controlled molecular weight, low polydispersity (M(w)/M(n) < 1.2), and a high proportion of meso dyads ( approximately 85%) was prepared by ATRP (with initiating system methyl 2-chloropropionate/CuCl/Me(6)TREN) and RAFT (with cumyl dithiobenzoate transfer agent) in the presence of Y(OTf)(3). The combination of NMP (using N-tert-butyl-1-diethylphosphono-2,2-dimethylpropyl nitroxide, SG1) and a Lewis acid complexation technique led to less precise control over chain architecture and microstructure ( approximately 65% meso dyads), as compared to RAFT/Y(OTf)(3) or ATRP/Y(OTf)(3). The latter two systems were used for the first one-pot synthesis of stereoblock copolymers by radical polymerization. Well-defined stereoblock copolymers, atactic-b-isotactic poly(N,N-dimethylacrylamides), were obtained by adding Y(OTf)(3) at a given time to either RAFT or ATRP polymerizations, initially started without the presence of the Lewis acid.     

Diastereoselective atom transfer radical cyclization reactions of unsaturated α-bromo oxazolidinone imides catalyzed by Lewis acids

A new Lewis acid-catalyzed atom transfer radical cyclization reaction of unsaturated α-bromo oxazolidinone imides is reported. In the presence of Lewis acids such as Mg(ClO₄)₂ and Yb(OTf)₃, a series of trans cyclic products was obtained in high yield (up to 87%) between 0°C and room temperature. The loading of strong Lewis acids, such as Yb(OTf)₃, can be reduced to 0.1 equiv. without significantly compromising the yield. Excellent diastereoselectivity could be achieved by using 1,2-stereocontrol or a chiral oxazolidinone auxiliary. For substrates 1e and 1f bearing a β-methyl substituent and the chiral auxiliary, (S)-(−)-4-benzyl-5,5-dimethyl-2-oxazolidinone, respectively, the diastereomeric ratio of the products was greater than 50:1.     

Application of Et3NHCl-AlCl3 ionic liquid as an initiator in cationic copolymerization of 1,3-pentadiene with styrene

Cationic copolymerization of 1,3-pentadiene (PD) with styrene (St) using the triethylamine hydrochloride-aluminium chloride (Et₃NHCl-AlCl₃) room temperature ionic liquid as an initiator in toluene has been investigated. The polymerization proceeds to high conversions, indicating high initiating reactivity of Et₃NHCl-AlCl₃ in these copolymerization systems, although molecular weights of the polymers are limited which are similar to polymerization initiated by Lewis acids such as TiCl₄, BF₃, BF₃·OEt₂. The polymers were analyzed using IR spectra in conjunction with gel permeation chromatography (GPC).     

Slow Reactant–Water Exchange and High Catalytic Performance of Water‐Tolerant Lewis Acids

³¹P nuclear magnetic resonance (NMR) spectroscopic measurement with trimethylphosphine oxide (TMPO) was applied to evaluate the Lewis acid catalysis of various metal triflates in water. The original ³¹P NMR chemical shift and line width of TMPO is changed by the direct interaction of TMPO molecules with the Lewis acid sites of metal triflates. [Sc(OTf)₃] and [In(OTf)₃] had larger changes in ³¹P chemical shift and line width by formation of the Lewis acid–TMPO complex than other metal triflates. It originates from the strong interaction between the Lewis acid and TMPO, which results in higher stability of [Sc(OTf)₃TMPO] and [In(OTf)₃TMPO] complexes than other metal triflate–TMPO complexes. The catalytic activities of [Sc(OTf)₃] and [In(OTf)₃] for Lewis acid‐catalyzed reactions with carbonyl compounds in water were far superior to the other metal triflates, which indicates that the high stability of metal triflate–carbonyl compound complexes cause high catalytic performance for these reactions. Density functional theory (DFT) calculation suggests that low LUMO levels of [Sc(OTf)₃] and [In(OTf)₃] would be responsible for the formation of stable coordination intermediate with nucleophilic reactant in water.     

Lewis Acid Coupled Electron Transfer of Metal–Oxygen Intermediates

Redox‐inactive metal ions and Brønsted acids that function as Lewis acids play pivotal roles in modulating the redox reactivity of metal–oxygen intermediates, such as metal–oxo and metal–peroxo complexes. The mechanisms of the oxidative C?H bond cleavage of toluene derivatives, sulfoxidation of thioanisole derivatives, and epoxidation of styrene derivatives by mononuclear nonheme iron(IV)–oxo complexes in the presence of triflic acid (HOTf) and Sc(OTf)₃ have been unified as rate‐determining electron transfer coupled with binding of Lewis acids (HOTf and Sc(OTf)₃) by iron(III)–oxo complexes. All logarithms of the observed second‐order rate constants of Lewis acid‐promoted oxidative C?H bond cleavage, sulfoxidation, and epoxidation reactions of iron(IV)–oxo complexes exhibit remarkably unified correlations with the driving forces of proton‐coupled electron transfer (PCET) and metal ion‐coupled electron transfer (MCET) in light of the Marcus theory of electron transfer when the differences in the formation constants of precursor complexes were taken into account. The binding of HOTf and Sc(OTf)₃ to the metal–oxo moiety has been confirmed for Mn^IV–oxo complexes. The enhancement of the electron‐transfer reactivity of metal–oxo complexes by binding of Lewis acids increases with increasing the Lewis acidity of redox‐inactive metal ions. Metal ions can also bind to mononuclear nonheme iron(III)–peroxo complexes, resulting in acceleration of the electron‐transfer reduction but deceleration of the electron‐transfer oxidation. Such a control on the reactivity of metal–oxygen intermediates by binding of Lewis acids provides valuable insight into the role of Ca²⁺ in the oxidation of water to dioxygen by the oxygen‐evolving complex in photosystem II.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Lewis acid-catalyzed reactions of mono-aryl group substituted methylenecyclopropanes with diethyl ketomalonate

Mono-aryl group substituted methylenecyclopropanes (MCPs) 1 react with diethyl ketomalonate 2a, an activated ketone, to give the corresponding 7-hydroxy-5-oxa-spiro[2,4]heptan-6-one derivatives 6 with syn-configuration in moderate yields in the presence of water under the catalysis of Lewis acids such as Sc(OTf)₃, Yb(OTf)₃ or In(OTf)₃ at room temperature. The reaction mechanism has been discussed on the basis of an ¹⁸O-labeling experiment.     

A stable intermediate: a new insight into the mechanism of Lewis acids-promoted formation of acylals from aldehydes

Treatment of m-nitrobenzaldehyde with acetic anhydride in the presence of Lewis acids, such as InBr₃, ZnBr₂, Cu(OTf)₂, gives a stable intermediate at the initial stage of reaction. Based on this new organic compound characterized by X-ray single crystal diffraction, a new mechanism for Lewis acids-promoted formation of acylals from aldehydes is proposed. Exchange reaction with different ratio of acetic anhydride to propionic anhydride, in the presence of Lewis acids, is studied.