Thermal and dilute-solution properties of zwitterionic copolymers

We report the synthesis, characterization, thermal and dilute-solution properties of zwitterionic copolymers of the sulfobetaine type, where the proportion of ionic groups is varied over a wide range. Two different structures are considered: poly (2-vinyl pyridine sulfopropyl betaine) and poly (4-vinyl pyridine sulfopropyl betaine). Synthesis is carried out to obtain random copolymers which are further characterized and their ionic content determined. At low proportions of ionic groups, the behavior is similar to that observed in ionomers, with substantial differences between the two structures, Increased interaction among the zwitterionic groups at higher charge densities is evidenced, which leads to the formation of clusters and agglomerates. An increase in the intrinsic viscosity with salt content in aqueous solutions is also observed. This behavior is analogous to that of homopolymers with 100% ionic content, but with particular features of interest.     

丙烯酸甲酯/乙烯基吡啶共聚物铑配合物的配体空间结构对甲醇羰基化反应催化性能的影响

针对共聚物配体聚合的随机性及其共聚结构单元的复杂性 ,运用XPS及红外光谱等分析手段 ,探讨了共聚物铑配合物微观结构对催化性能的影响 ;研究了丙烯酸甲酯 2 乙烯基吡啶和丙烯酸甲酯 4 乙烯基吡啶两种共聚物与铑的不同配比的配合物的活性 ,考察了相同配比的共聚物配合物结构单元、温度等因素对消化活性的影响 ,为催化剂结构的合理设计提供了理论参考     

Etude thermodynamique des complexes de transfert de charge du type n-σ* en solution Complexes de la quinoléine et de quinoléines substituées avec I2, ICI et IBr

Thermodynamic study of charge transfert complexes (n-σ*) in solution Charge transfer complexes of quinoline and substituted quinolines (donors) with iodine, iodine chloride, and iodine bromide (acceptors) have been studied spectrophotometrically in CCl₄. The 1:1 stoechiometry of these complexes was verified by means of the continous variations method and the appearance of isosbestic points. Simultaneous determination of the equilibrium constant and enthalpy of adduct formation was carried out by calorimetry. It was observed for every donor that the equilibrium constants of the complexes studied increase with the strength of the acceptors. A linear correlation between enthalpy of adduct formation and donor strength was obtained only for the complexes Donor ICI.     

Molecular weight control in polycondensation of hydroxyl diesters with hexamethylenediamine by polymer matrices

Polycondensation reactions of hydroxyl diesters such as dimethyl tartrate (DMT) and diethyl mucate (DEM) with hexamethylenediamine (HMD) were carried out in the presence of poly(vinyl pyridine) (P-VPy) and its copolymers with styrene of different compositions as matrix polymers in order to investigate the difference in interaction forces with monomers or the resulting polyamides owing to hydrogen bonding. It was found that matrix effects of poly(4-vinyl pyridine) (P-4VPy) on the rate enhancement and solution viscosity of the resulting polyamide became more pronounced with decreasing solvent polarity. This result suggests that the matrix effects of P-4VPy on polycondensation are due to hydrogen bonding interactions between hydroxyl diesters and P-4VPy. The addition of P-4VPy increased the molecular weight of the resulting polyamide to a higher extent than poly(2-vinyl pyridine) (P-2VPy), and the molecular weight of the resulting polyamide could be controlled according to the molecular weight of P-4VPy. Copolymer composition of 4-vinyl pyridine–styrene (4VPy/St) copolymers as matrix polymers also affected the molecular weight of the polyamide, which increased with increasing P-4VPy unit contents in the copolymers.     

Kinetic and thermodynamic studies on molecular interaction of antipyrine donor and 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone as an electron acceptor in different solvents

The charge–transfer (CT) complex of donor antipyrine with Π‐acceptor 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) has been investigated spectrophotometrically in different halocarbon and acetonitrile solvents. The results indicated immediate formation of an electron donor–acceptor complex (DA), which is followed by two relatively slow consecutive reactions. The pseudo–first‐order rate constants for the formation of the ionic intermediate and the final product at various temperatures were evaluated from the absorbance–time data. The activation parameters, viz. activation energy, enthalpy, entropy, and free energy of activation, were computed from temperature dependence of rate constants. The stoichiometry of the complex was found to be 1:1 by Job's method of continuous variation. The formation constants of the resulting DA complexes were determined by the Benesi–Hildebrand equation at four different temperatures. The enthalpies and entropies of the complex formation reactions have been obtained by temperature dependence of the formation constants using Van't Hoff equation. The results indicate that DDQ complexes of antipyrine in all solvents are enthalpy stabilized but entropy destabilized. Both the kinetics of the interaction and the formation constants of the complexes are dependent upon the polarity of the solvents. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 81–91, 2013     

Etude theorique de la reactivite des ions libres intervenant dans la polymerisation anionique de quelques monomeres vinyliques

The reactivities have been calculated for free ions involved in anionic polymerization of vinyl monomers. The copolymerization constants k_AB available in the literature are compared to the stabilization energies involved in the reaction of carbanions with the same monomer. The reactivities of carbanions of living poly (2-vinyl pyridine), poly styrene and poly (substituted styrenes) with respect to 1-1,diphenylethylene have been computed. The rate constants of homopolymerisation have been compared with the variation of π energy between the “monomer” and “carbanion” states of these monomers. The occurrence of side-reactions during the polymerization of vinyl-pyridine has been investigated using quantum chemistry methods.     

Spectroscopic study on charge transfer molecular complexes of pyrazole derivatives with some pi-electron acceptors

Charge transfer molecular complexes of some pyrazole donors (pyrazole, 4-methylpyrazole, 3-methylpyrazole and 3,5-dimethylpyrazole) with 2,3-dichloro-5,6-dicyano-1,4-p-benzoquinone and tetracyanoethylene as pi-electron acceptors have been studied in CH2Cl2 at 25 degrees C. Spectral characteristics and stability constants of the formed charge transfer (CT) complexes are discussed in terms of the nature of donor and acceptor molecular structure, as well as in relation to solvent polarity. Thermodynamic parameters (deltaH, deltaG and deltaS) associated with CT complex formation are also examined. It was concluded that the formed CT complexes are of n-pi type with 1:1 (D:A) composition.     

Autocatalysis and equilibrium in polyimide synthesis

Model compounds have been used to determine the mechanism of the reaction of aromatic diamines with aromatic cyclic dianhydrides to form poly(amic acids). Phthalic anhydride was used to model the anhydride functionality, while either 4,4′-diaminodiphenyl ether or aniline was used for the amine functionality. The reaction between these materials was shown to follow second-order, autocatalytic, and reversible kinetics. The rate constants for the mechanism were determined using a Runge–Kutta numerical integration of the rate equation and a Fibonacci technique to determine the reverse rate constant which minimzed the sum of squared deviations of the experimental data from the predicted line. Autocatalytic reversible kinetics are also followed by the formation of the poly(amic acid) precursor to a thermoplastic polyimide. In this polymerizing system, pyridine shifts the equilibrium to higher degrees of conversion to give higher molecular weights, while the opposite effect is obtained with acetic acid. Similarly, low temperatures favor higher equilibrium conversion and higher molecular weights. Thus the molecular weight of polyimides can be systematically controlled by manipulating factors which control the equilibrium conversion during the original formation of the poly(amic acid) precursor.     

Polymerization of propylene with TiCl3–AlEt2Cl–polymeric electron donor catalyst

Polymeric donors having ether or carbonyl groups were added to the TiCI₃–AlEt₂CI catalyst system as the third component, and the effects on the polymerization of propylene were investigated in comparison with the effect of the electron donors with low molecular weight. The polymeric donors were effective in making the catalyst more active, but the donors of low molecular weight depressed the catalyst activity. In the case of poly(propylene glycol dimethyl ether) (PPG-DME), PPG–DME with a number of propylene oxide units (n) of more than 6.7 was effective in enhancing the catalyst activity. These effects were considered to be due to the different reactivities between TiCI₃ and AlEt₂CI-polymeric donor complexes having various chain lengths.     

Synergism in the extraction of cerium using nitrogen-base donors

Synergism in the extraction of cerium in presence of a mixture of a β-diketone and nitrogen donors like pyridine, 2,4-dimethylpyridine, quinoline and 8-nitroquinoline has been investigated. The nature of the extracted species has been investigated and the equilibrium constants for adduct formation have been calculated. Synergism increased in the order 8-nitroquinoline < pyridine ≈ quinoline > 2,4-dimethyl pyridine.     

Etude de la poly(vinyl-2 pyridine) dans des melanges de solvants: relation entre la solvatation preferentielle du polymere et sa masse moleculaire

This paper contains values of the preferential solvation coefficient λ for poly(2-vinyl pyridine) in solvent mixtures of various compositions (ethanol-benzene, ethanol-cyclohexane, chloroform-benzene, benzene-cyclohexane and THF-cyclohexane). Results have been obtained for linear polymers (molecular weight ranging from 3500 to 200,000) and for a branched polymer. They show that, when there is a possibility of hydrogen bond formation between solvent and polymer, λ does not depend on the molecular weight of the polymer. On the contrary, when there are only weak interactions, λ is a function of molecular weight and obeys the relation already verified for non-polar polymers.     

Absorption spectrometric study of molecular complex formation between [60]fullerene and a series of methylated pyridines

[60]fullerene has been shown to form 1:1 molecular complexes with pyridine and some methylated pyridines such as 2-picoline, 3-picoline, 4-picoline, 2,6-lutidine and 2,4,6-collidine in CCl4 medium by absorption spectrometric method. Well defined charge transfer (CT) bands have been observed for complexes of C60 with all the pyridines studied except 4-picoline. From an analysis of the trends in the CT absorption bands the ionisation potentials of the methylpyridines have been determined. The electron affinity of C60 has also been determined from the spectral data. The formation constants of the complexes exhibit a very good linear free energy relationship from which the Hammett p parameter for the complexation process is found to be -2.96.     

Photophysical properties of novel fluorescent poly(oxyethylene phosphate) tris(β-diketonate) europium (III) complexes

In the present study, photophysical properties of fluorescent poly(oxyethylene phosphate) tris(β-diketonate) europium (III) complexes have been studied by means of stationary and time-resolved fluorescence spectroscopy (in ethanol at room temperature). The luminescent quantum yields and efficiency for the energy transfer from β-diketonate ligands to Eu(III) ion have been determined for the studied complexes by using diffusion-enhanced fluorescence resonance energy transfer. Obtained results show effect of the polymer ligands upon photophysical properties of the complexes and a relation has been established with length of the oxyethylene spacer between two phosphonate groups. The Förster radiuses of the synthesized compounds with SulfoRhodamine 101 as acceptor have been calculated. Measured distances between molecules of the donors and acceptor at identical acceptor/donor molar ratios have been illustrated the difference in structure of the ternary and polymer complexes in solution even at low concentration.     

4,4′′′′‐Azobis[2,2′: 6′,2″‐terpyridine] and its Metal Complexes

By two different routes, 4,4′′′′‐azobis[2,2′: 6′,2″‐terpyridine] was synthesized. Its ruthenium complexes show interesting metal‐to‐ligand charge transfer (MLCT) absorption maxima in the electronic spectra. They represent the first ruthenium complexes of terpyridine units to give blue solutions.     

Steric conditions for donor–acceptor interactions in C60 complexes with planar organic donors

Charge transfer complexes of fullerene C₆₀ with planar donors of tetrathiafulvalene, dithiadiazafulvalene and pyranylidene family were investigated by IR- and UV-VIS-NIR spectroscopy. The analysis of IR and X-ray data shows that the charge transfer complexes of fullerene with the planar donors are involved in polarization interactions of van der Waals type. Charge transfer is very weak in these compounds and is hindered by unfavourable steric factors. As a result, the CT rate does not correlate with the ionization potential of the donor; the charge transfer absorption bands are very weak too.     

Interaction of dimethyltin(IV) dichloride with 5′‐IMP and 5′‐UMP

The formation constants of the species formed in the systems H⁺ + dimethyltin(IV) + 5′‐IMP and 5′‐UMP, H⁺ + 5′‐IMP and H⁺ + 5′‐UMP have been determined in aqueous solution in the pH range 1.5–9.5 at constant temperature (25 °C) and constant ionic strength (0.1 mol dm⁻³ NaClO₄), using spectrophotometric and potentiometric techniques. ¹H and ³¹P NMR investigations in aqueous solution confirmed the species formation. The precipitated complexes of IMP and UMP by Me₂Sn(IV)²⁺ at low pH values were characterized by elemental analysis and FTIR spectroscopy methods, the bonding sites of the ligands were determined and ruled out purine and pyrimidine moieties (N‐7 and N‐1 in IMP and N‐3 in UMP, respectively) while a bidentated coordination of the phosphate group is concluded in both cases. Finally, the experiments revealed the existence of complexes with trigonal bipyramidal structures that is in agreement with similar systems resulted previously. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of “living” chains of polyvinylpyridine and their application to the construction of homo- and hybrid polymer with complex architecture

Experimental conditions ensuring the formation of living poly(2- and 4-vinyl pyridine) chains in the vinyl pyridine - allyl derivatives of chromium, molybdenum and tungsten systems are described. Variation of the reagents nature, polarity of the solvent permits to obtain polymers differing in their structural and molecular parameters. Synthesized polymers contain block and graft sequences, as well as macrocyclic fragments. Living chains under consideration were applied for polymerization of different monomers. Hybrid polymers obtained by this way were studied in detail by the same methods as the homopolymers.     

Synthesis and characterization of poly(arylene ether)s derived from 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl

A series of poly(arylene ether)s were successfully prepared by aromatic, nucleophilic substitution reactions with various perfluoroalkyl‐activated bisfluoromonomers with 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl. 4,4′‐Bishydroxyterphenyl was synthesized through the Grignard coupling reaction of magnesium salt of 4‐bromoanisole with dibromobenzene followed by demethylation with pyridine–hydrochloride. The products obtained by the displacement of fluorine atoms exhibited good inherent viscosity, up to 0.77 dL/g, and number‐average molecular weights up to 69,300. These poly(arylene ether)s showed very good thermal stability, up to 548 °C for 5% weight loss according to thermogravimetric analysis under synthetic air, and high glass‐transition temperatures, up to 259 °C according to differential scanning calorimetry, depending on the exact repeat unit structure. These polymers were soluble in a wide range of organic solvents, such as N‐methylpyrrolidone, dimethylformamide, tetrahydrofuran, toluene, and CHCl₃, and were insoluble in dimethyl sulfoxide and acetone. Thin films of these poly(arylene ether)s showed good transparency and exhibited tensile strengths up to 132 MPa, moduli up to 3.34 GPa, and elongations at break up to 84%, depending on their exact repeating unit structures. These values are comparable to those of high‐performance thermoplastic materials such as poly(ether ether ketone) (PEEK) and Ultem poly(ether imide) (PEI). These poly(arylene ether)s exhibited low dielectric constants. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 55–69, 2002     

Charge transfer complexes between 4,4′-disubstituted diphenyldiacetylenes: experimental and theoretical study

Novel charge transfer (CT) complexes containing donor and acceptor derivatives of diphenyldiacetylene have been synthesised and characterised. The structure of CT complexes was modelled at the B3LYP/6-31G(d)//B3LYP/6-31G(d) level of theory. It was found that the complex formation is mainly due to dipole–dipole interaction between side groups of diacetylene molecules and there was no significant charge transfer between donor and acceptor in the ground state. On the other hand, optical excitation of CT complexes leads to strong charge transfer from donor to acceptor molecule as followed from the modelling using time-dependent density functional theory (DFT) method. Diacetylene molecules adopt strongly bent configuration in CT complexes which is prohibitive for solid-state topochemical polymerisation of diacetylenes     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012