Oxorhenium(V) complexes with the non-sulfur-containing amino acid histidine

Equivalent amounts of ReOX(3)(OPPh(3))(Me(2)S) (where X = Cl, Br) and L-histidine (L-hisH) in acetonitrile yield ReOX(2)(L-his), in which the amino acid monoanion is N,N,O-tridentate. X-ray diffraction work on both compounds shows that the three donors occupy a face in a distorted octahedron and the carboxylate oxygen is coordinated trans to the Re=O bond. The 2:1 complex [ReO(L-his)(2)]I is obtained by reacting 2 equiv of L-histidine with ReO(2)I(PPh(3))(2) in methanol in the presence of NaOCH(3). (1)H NMR spectroscopy indicates that these complexes contain one N,N,O-tridentate histidine anion coordinated as above and one N,N-bidentate histidine anion, whose carboxylate group is free. By refluxing ReOX(2)(L-his) in methanol, the carboxylic groups esterify and two octahedral units condense into an oxo-bridged dinuclear complex [ReOX(2)(L-hisMe)](2)O containing N,N-bidentate histidine methyl ester. The O=Re-O-Re=O backbone is approximately linear, and the two ReOX(2)(L-hisMe) units are related by a 2-fold axis through the central oxygen. Crystals of [ReOBr(2)(L-hisMe)](2)O consist of an ordered phase containing two of the possible diastereoisomers in a 1:1 ratio. (1)H NMR spectra of these crystals include two sets of signals, consistent with the presence of two isomers with C(2) symmetry, and the spectra of the nonrecrystallized material confirm that these are the only two isomers formed.     

Double silyl migration converting ORe[N(SiMe(2)CH(2)PCy(2))(2)] to NRe[O(SiMe(2)CH(2)PCy(2))(2)] substructures

The reaction of (R(2)PCH(2)SiMe(2))(2)NM (PNP(R)M; R = Cy; M = Li, Na, MgHal, Ag) with L(2)ReOX(3) [L(2) = (Ph(3)P)(2) or (Ph(3)PO)(Me(2)S); X = Cl, Br] gives (PNP(Cy))ReOX(2) as two isomers, mer,trans and mer,cis. These compounds undergo a double Si migration from N to O at 90 degrees C to form (POP(Cy))ReNX(2) as a mixture of mer,trans and fac,cis isomers. Additional thermolysis effects migration of CH(3) from Si to Re, along with compensating migration of halide from Re to Si. DFT calculations on various structural isomers support the greater thermodynamic stability of the POP/ReN isomer vs PNP/ReO and highlight the influence of the template effect on the reactivities of these species.     

Pyridylazole chelation of oxorhenium(V) and imidorhenium(V). Rates and trends of oxygen atom transfer from Re(V)O to tertiary phosphines

The concerned azoles are 2-(2-pyridyl)benzoxazole (pbo) and 2-(2-pyridyl)benzthiazole (pbt). These react with ReOCl(3)(PPh(3))(2) in benzene, affording Re(V)OCl(3)(pbo) and Re(V)OCl(3)(pbt), which undergo facile oxygen atom transfer to PPh(2)R (R = Ph, Me) in dichloromethane solution, furnishing Re(III)(OPPh(2)R)Cl(3)(pbo) and Re(III)(OPPh(2)R)Cl(3)(pbt). The oxo species react with aniline in toluene solution, yielding the imido complexes Re(V)(NPh)Cl(3)(pbo) and Re(V)(NPh)Cl(3)(pbt). The X-ray structures of pbt, ReOCl(3)(pbt), Re(OPPh(3))Cl(3)(pbt), and Re(NPh)Cl(3)(pbo) are reported. The lattice of pbt consists of stacked dimers. In all the complexes the azole ligand is N,N-chelated and the ReCl(3) moiety is meridionally disposed. In ReOCl(3)(pbt) the metal-oxo bond length is 1.607(9) A. The second-order rates and the associated activation parameters of the oxygen atom transfer reactions of the Re(V)O chelates with PPh(2)R are reported. The large and negative entropy of activation (approximately -24 eu) is consistent with an associative pathway involving nucleophilic phosphine attack. The rate increases with phosphine basicity (PPh(2)Me > PPh(3)) and azole heteroatom electronegativity (O(pbo) > S(pbt)). Logarithmic rate constants for ReOCl(3)(pbo), ReOCl(3)(pbt), and ReOCl(3)(pal) are found to correlate linearly with Re(VI)O/Re(V)O reduction potentials (pal is pyridine-2-(N-p-tolyl)aldimine). The relatively low rate constant of ReOCl(3)(pbt) compared to that of ReOCl(3)(pal) is consistent with the observed shortness of the metal-oxo bond in the former. Crystal data are as follows: (pbt) empirical formula C(12)H(8)N(2)S, crystal system orthorhombic, space group Pca2(1), a = 13.762(9) A, b = 12.952(8) A, c = 11.077(4) A, V = 1974(2) A(3), Z = 8; (ReOCl(3)(pbt)) empirical formula C(12)H(8)Cl(3)N(2)OSRe, crystal system monoclinic, space group P2(1)/c, a = 11.174(7) A, b = 16.403(10) A, c = 7.751(2) A, beta = 99.35(4) degrees, V = 1401.8(13) A(3), Z = 4; (Re(NPh)Cl(3)(pbo)) empirical formula C(18)H(13)Cl(3)N(3)ORe, crystal system monoclinic, space group P2(1)/c, a = 9.566(6) A, b = 16.082(8) A, c = 11.841(5) A, beta = 94.03(4) degrees, V = 1817(2) A(3), Z = 4.     

Unusual reactivity of the [Re(V)O]3+ core: syntheses and characterization of novel rhenium halide complexes with n-methyl-o-diaminobenzene

The reactions of 1 or 2 equiv of N-methyl-o-diaminobenzene with trans-[ReOX(3)(PPh(3))(2)] (X = Cl, Br) in refluxing chloroform gave oxo-free rhenium complexes [Re(VI)X(4)(NC(6)H(4)NHCH(3))(OPPh(3))] (X = Cl, 3; X = Br, 6), [Re(V)X(2)Y(NC(6)H(4)NHCH(3))(PPh(3))(2)] (X, Y = Cl, 4; X = Br, Y = Cl, 7), [Re(IV)Cl(2)(NHC(6)H(4)NCH(3))(2)] (5), and [Re(IV)Br(3)(NHC(6)H(4)NCH(3))(PPh(3))] (8). All complexes were characterized by elemental analysis, (1)H NMR and IR spectroscopy, cyclic voltammetry, EPR spectroscopy, and X-ray crystallography. The complexes all display distorted octahedral coordination geometry. For Re(IV) complexes 5 and 8, the ligands coordinate in the benzosemiquinone diimine form. In Re(VI) complexes 3 and 6 and the Re(V) complexes 4 and 7, the ligands coordinate in the dianionic monodentate imido form. The EPR spectra of Re(VI) species 3 and 6 in dichloromethane solution at room temperature exhibit the characteristic hyperfine pattern of six lines, with evidence of strong second-order effects. The IR spectra of the complexes are characterized by Re=N and Re-N stretching bands at ca. 1090 and 540 cm(-)(1), respectively. The Re(IV) and Re(V) complexes display well-resolved NMR spectra, while the Re(VI) complexes exhibit no observable spectra, due to paramagnetism. The cyclic voltammograms of complexes 3 and 6 display Re(VII)/ Re(VI) and Re(VI)/Re(V) processes, those of 4 and 7 exhibit Re(VI)/Re(V) and Re(V)/Re(IV) couples, and those of 5 and 8 are characterized by Re(V)/Re(IV) and Re(IV)/Re(III) processes.     

Syntheses and structures of pyrazolylmethane complexes of rhenium(III), (IV) and (V)

Reaction of [ReOCl3(PPh3)(2)] with HCpz(3) (pz = pyrazole) in dichloromethane leads to the formation of a new Re(iv) complex [ReCl3(HCpz3)]X (X=Cl, [ReO4]) with loss of the rhenium-oxo group. We also report a convenient, high-yield synthetic route to complexes of the type [ReOXn(L)](3-n)+ (X=Cl, Br, n = 2, 3) by the reaction of bis(pyrazolylmethane) and bis(pyrazolylacetate) ligands with [ReOCl3(PPh3)2]. Dinuclear complexes containing the O=Re-O-Re=O group were also isolated and structurally characterised. We have also investigated the reactions of these ligands with diazenide precursors and isolated and characterised complexes of the type [ReClx(N2Ph) (L)(PPh3)] (x = 1,2). The potential applications of these complexes as radiopharmaeuticals is discussed.     

A density functional study of oxorhenium(V) complexes incorporating quinoline or isoquinoline carboxylic acids: structural,spectroscopic, and electronic properties

Density functional theory calculations have been performed for understanding factors responsible for the different stabilities of particular isomers of [ReOX(N–O)₂], where N–O represents carboxylate ligand chelating to the oxorhenium core through N and O atoms. DFT/B3LYP calculations have been carried out for all possible potential isomers of [ReO(OMe)(2-qc)₂] (1), [ReOCl(2-qc)₂] (2), [ReO(OMe)(1-iqc)₂] (3), and [ReOCl(1-iqc)₂] (4). Interestingly, complex 1 shows a very rare example of trans [O=Re–OMe] conformation with two chelating N,O-donor ligands in the equatorial plane, whereas the others were found to be the most common structure of [ReOX(N–O)₂] with cis-N,N arrangement and chloride or methoxy ligand cis to the Re=O moiety. A thorough study of the calculated structures clearly shows that molecular structure of complexes [ReOX(N–O)₂] is predominantly governed by multiply bonded oxo ligand, but the isomeric preferences may be tuned by careful selection of N–O ligands.     

Rhenium oxohalides: synthesis and crystal structures of ReO3Cl(THF)2, ReOCl4(THF), Re2O3Cl6(THF)2, and Re2O3Cl6(H2O)2

Convenient methods to prepare solvated rhenium oxochlorides are described; these compounds should serve as useful starting materials for rhenium chemistry. Treatment of perrhenic acid, HReO(4), with chlorotrimethylsilane or with thionyl chloride, followed by addition of tetrahydrofuran, forms the new oxochloride complexes ReO(3)Cl(THF)(2) and ReOCl(4)(THF), respectively. Small amounts of two dinuclear oxochlorides, which evidently resulted from adventitious hydrolysis, were also isolated: Re(2)O(3)Cl(6)L(2), where L = THF or H(2)O. All four compounds were characterized by X-ray crystallography. The rhenium(vii) complex ReO(3)Cl(THF)(2) adopts a distorted octahedral geometry in which the three oxo ligands are in a facial arrangement; the rhenium(vi) complex ReOCl(4)(THF) adopts a trans octahedral structure. The two dinuclear rhenium(vi) compounds both have a single, nearly linear, bridging oxo group; on each Re center, the three terminal chlorides adopt a mer arrangement, and the terminal oxo and the coordinated Lewis base are mutually trans. The water ligand in the aqua complex is hydrogen bonded to nearby THF molecules. IR data are given.     

Rhenium chemistry of diazabutadienes and derived iminoacetamides spanning the valence domain II-VI. Synthesis, characterization, and metal-promoted regiospecific imine oxidation

The reaction of diazabutadienes of type R'N=C(R)-C(R)=NR', L (R = H, Me; R' = cycloalkyl, aryl) with Re(V)OCl(3)(AsPh(3))(2) has furnished Re(V)OCl(3)(L), 1, from which Re(III)(OPPh(3))Cl(3)(L), 2, and Re(V)(NAr)Cl(3)(L), 3, have been synthesized. Chemical oxidation of 2(R = H) by aqueous H(2)O(2) and of 3(R = H) by dilute HNO(3) has yielded Re(IV)(OPPh(3))Cl(3)(L'), 5, and Re(VI)(NAr)Cl(3)(L'), 4, respectively, where L' is the monoionized iminoacetamide ligand R'N=C(H)-C(=O)-NR'(-). Finally, the reaction of Re(V)O(OEt)X(2)(PPh(3))(2) with L has furnished bivalent species of type Re(II)X(2)(L)(2), 6(X = Cl, Br). The X-ray structures of 1 (R = Me, R' = Ph), 3 (R = H, R' = Ph, Ar = Ph), and 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl) are reported revealing meridional geometry for the ReCl(3) fragment and triple bonding in the ReO (in 1) and ReNAr (in 3 and 4 ) fragments. The cis geometry (two Re-X stretches) of ReX(2)(L)(2) is consistent with maximized Re(II)-L back-bonding. Both ReX(2)(L)(2) and Re(NAr)Cl(3)(L') are paramagnetic (S = (1)/(2)) and display sextet EPR spectra in solution. The g and A values of Re(NAr)Cl(3)(L') are, respectively, lower and higher than those of ReX(2)(L)(2). All the complexes are electroactive in acetonitrile solution. The Re(NAr)Cl(3)(L) species display the Re(VI)/Re(V) couple near 1.0 V versus SCE, and coulometric studies have revealed that, in the oxidative transformation of 3 to 4, the reactive intermediate is Re(VI)(NAr)Cl(3)(L)(+) which undergoes nucleophilic addition of water at an imine site followed by induced electron transfer finally affording 4. In the structure of 3 (R = H, R' = Ph, Ar = Ph), the Re-N bond lying trans to the chloride ligand is approximately 0.1 A shorter than that lying trans to NPh. It is thus logical that the imine function incorporating the former bond is more polarized and therefore subject to more facile nucleophilic attack by water. This is consistent with the regiospecificity of the imine oxidation as revealed by structure determination of 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl).     

Unsymmetrical tren-based ligands: synthesis and reactivity of rhenium complexes

Reaction of bis(2-aminoethyl)(3-aminopropyl)amine with C(6)F(6) and K(2)CO(3) in DMSO yields unsymmetrical [(C(6)F(5))HNCH(2)CH(2)](2)NCH(2)CH(2)CH(2)NH(C(6)F(5)) ([N(3)N]H(3)). The tetraamine acts as a tridentate ligand in complexes of the type H[N(3)N]Re(O)X (X = Cl 1, Br 2) prepared by reacting Re(O)X(3)(PPh(3))(2) with [N(3)N]H(3) and an excess of NEt(3) in THF. Addition of 1 equiv of TaCH(CMe(2)Ph)Br(3)(THF)(2) to 1 gives the dimeric compound H[N(3)N]ClReOReBrCl[N(3)N]H (3) in quantitative yield that contains a Re(V)[double bond]O[bond]Re(IV) core with uncoordinated aminopropyl groups in each ligand. Addition of 2 equiv of TaCH(CMe(2)Ph)Cl(3)(THF)(2) to 1 leads to the chloro complex [N(3)N]ReCl (4) with all three amido groups coordinated to the metal, whereas by addition of 2 equiv of TaCH(CMe(2)Ph)Br(3)(THF)(2) to 2 the dibromo species H[N(3)N]ReBr(2) (5) with one uncoordinated amino group is isolated. Reduction of 4 under an atmosphere of dinitrogen with sodium amalgam gives the dinitrogen complex [N(3)N]Re(N(2)) (6). Single-crystal X-ray structure determinations have been carried out on complexes 1, 3, 5, and 6.     

Bis(ligand) Rhenium(V) and Technetium(V) Complexes of Two Naturally Occurring Binding Moieties (Oxazoline and Thiazoline)

Attempts to prepare tris(ligand) metal complexes of technetium in intermediate oxidation states with potentially bidentate oxazoline- and thiazoline-containing ligands were unsuccessful; when pertechnetate was reduced in the presence of excess ligand, TcO(2).xH(2)O was produced. Instead, by reaction with preformed M.O cores, a series of oxotechnetium(V) and oxorhenium(V) complexes of the formula MOXL(2) (M = Re, X = Br; M = Tc, X = Cl) and HL = 2-(2'-hydroxyphenyl)-2-oxazoline (Hoz), 2-(2'-hydroxy-3'-methylphenyl)-2-oxazoline (Hmoz), 2-(2'-hydroxyphenyl)-2-thiazoline (Hthoz), and 2-(2'-hydroxyphenyl)-2-benzoxazoline (Hhbo) have been prepared. These compounds have been characterized by a variety of techniques including single-crystal X-ray diffraction. Crystals of Hthoz (C(9)H(9)NOS) are monoclinic, with space group P2(1)/n, a = 7.5342(6) ?, b = 12.2187(6) ?, c = 9.3942(8) ?, beta = 94.233(7) degrees, and Z = 4; those of TcOCl(thoz)(2) (C(18)H(16)ClN(2)O(3)S(2)Tc) are monoclinic, with space group P2(1)/n, a = 16.506(1) ?, b = 7.664(1) ?, c = 16.3216(6) ?, beta = 111.154(4) degrees, and Z = 4; those of ReOBr(oz)(2) (C(18)H(16)BrN(2)O(5)Re) are orthorhombic, with space group Pbca, a = 12.864(2) ?, b = 25.369(2) ?, c = 11.025(2) ?, and Z = 8. The structures were solved by direct (Hthoz) or Patterson (metal complexes) methods and were refined by full-matrix least-squares procedures to R = 0.033, 0.032, and 0.028 for 1600, 3152, and 2651 reflections with I >/= 3sigma(I), respectively. In the two complexes, the geometry around the metals is distorted octahedral with the halide ligands in each bound cis, and one phenolate oxygen from one ligand in each bound trans to the metal-oxo linkage. In ReOBr(oz)(2), the two oxazoline nitrogens are coordinated trans to one another; in TcOCl(thoz)(2), the two thiazoline nitrogens are found cis to one another.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Theoretical study of valence photoelectron spectra of Re(CO)5X (X=Cl, Br, and I): a spin-orbit DK3 symmetry-adapted cluster/symmetry-adapted cluster-configuration interaction study

The valence photoelectron spectra of Re(CO)(5)X (X=Cl, Br, and I) are studied theoretically using symmetry-adapted cluster (SAC)/SAC-configuration interaction (SAC-CI) theory. The relativistic effects are included by the third-order Douglas-Kroll (DK3) method, and the spin-orbit coupling is also considered. Both electron correlation and relativistic effects are significant in assigning the valence photoelectron spectra of Re(CO)(5)X (X=Cl, Br, and I). DK3-SAC/SAC-CI provides values for the relative peak positions in a reasonable agreement with the observed photoelectron spectra. The sequence of ionization energies for Re(CO)(5)Cl, Re(CO)(5)Br, and Re(CO)(5)I are calculated as e(')[a(1)(Cl)]>e(')[e(Re+Cl)] approximately e(")[e(Re+Cl)]>e(")[b(2)(Re)]>e(')[e(Re-Cl)]>e(")[e(Re-Cl)], e(')[a(1)(Br)]>e(')[e(Re+Br)]>e(")[e(Re+Br)+b(2)(Re)]>e(")[b(2)(Re)+e(Re+Br)]>e(')[e(Re-Br)]>e(")[e(Re-Br)], and e(')[e(Re+I)+a(1)(I)]>e(")[b(2)(Re)+e(Re+I)] approximately e(')[a(1)(I)+e(Re+I)]>e(")[e(Re+I)+b(2)(Re)]>e(')[e(Re-I)]>e(")[e(Re-I)], respectively. These assignments are quite new and different from previous assignments.     

Synthesis and characterization of rhenium(V) oxo complexes with N-[N-(3-diphenylphosphinopropionyl)glycyl]cysteine methyl ester. X-ray crystal structure of (ReO[Ph(2)P(CH(2))(2)C(O)-Gly-Cys-OMe(P,N,N,S)])

The PN(2)S chelate N-[N-(3-diphenylphosphinopropionyl)glycyl]-S-tritylcysteine methyl ester [PN(2)S(Trt)-OMe] was synthesized and reacted with ReOCl(3)(PPh(3))(2) and Ph(4)P[ReOCl(4)]. The reactions of both tritylated and detritylated ligands with Re(V)O precursors gave two diastereomers, 9a and 9b, of the ReO(PN(2)S-OMe) complex. The two isomers, produced in a 1:1 molar ratio, are stable and do not interconvert. They were separated by reverse-phase HPLC and characterized by NMR, FT-IR, and UV-visible spectroscopy and electrospray mass spectrometry. X-ray analysis established for 9a the presence in the solid of the syn isomer. Compound 9a, C(21)H(23)N(2)O(5)PSRe, crystallized from warm acetonitrile in the triclinic space group Ponemacr;, a = 9.828(2) A, b = 11.163(2) A, c = 11.641(2) A, alpha = 106.48(3) degrees, beta = 109.06(3) degrees, gamma = 102.81(3) degrees, V = 1085.7(4) A(3), Z = 2. The PN(2)S coordination set is in the equatorial plane, and the complex shows a distorted square pyramidal coordination. The anti configuration assigned to 9b is consistent with all the available physicochemical data. Follow-up of the reaction of the detritylated ligand with Ph(4)P[ReOCl(4)] in ethanol or acetonitrile indicated that the phosphorus atom of the chelate binds first to the metal and that this bond acts as the driving force for coordination.     

Site selectivity in the protonation of a phosphinito bridged Pt(I)-Pt(I) complex: a combined NMR and density-functional theory mechanistic study

The protonation of the dinuclear phosphinito bridged complex [(PHCy2)Pt(mu-PCy2){kappa(2)P,O-mu-P(O)Cy2}Pt(PHCy2)] (Pt-Pt) (1) by Br?nsted acids affords hydrido bridged Pt-Pt species the structure of which depends on the nature and on the amount of the acid used. The addition of 1 equiv of HX (X = Cl, Br, I) gives products of formal protonation of the Pt-Pt bond of formula syn-[(PHCy2)(X)Pt(mu-PCy2)(mu-H)Pt(PHCy2){kappaP-P(O)Cy2}] (Pt-Pt) (5, X = Cl; 6, X = Br; 8, X = I), containing a Pt-X bond and a dangling kappa P-P(O)Cy2 ligand. Uptake of a second equivalent of HX results in the protonation of the P(O)Cy2 ligand with formation of the complexes [(PHCy2)(X)Pt(mu-PCy2)(mu-H)Pt(PHCy2){kappaP-P(OH)Cy2}]X (Pt-Pt) (3, X = Cl; 4, X = Br; 9, X = I). Each step of protonation is reversible, thus reactions of 3, 4, with NaOH give, first, the corresponding neutral complexes 5, 6, and then the parent compound 1. While the complexes 3 and 4 are indefinitely stable, the iodine analogue 9 transforms into anti-[(PHCy2)(I)Pt(mu-PCy2)(mu-H)Pt(PHCy2)(I)] (Pt-Pt) (7) deriving from substitution of an iodo group for the P(OH)Cy2 ligand. Complexes 3 and 4 are isomorphous crystallizing in the triclinic space group P1 and show an intramolecular hydrogen bond and an interaction between the halide counteranion and the POH hydrogen. The occurrence of such an interaction also in solution was ascertained for 3 by (35)Cl NMR. Multinuclear NMR spectroscopy (including (31)P-(1)H HOESY) and density-functional theory calculations indicate that the mechanism of the reaction starts with a prior protonation of the oxygen with formation of an intermediate (12) endowed with a six membered Pt(1)-X...H-O-P-Pt(2) ring that evolves into thermodynamically stable products featuring the hydride ligand bridging the Pt atoms. Energy profiles calculated for the various steps of the reaction between 1 and HCl showed very low barriers for the proton transfer and the subsequent rearrangement to 12, while a barrier of 29 kcal mol(-1) was found for the transformation of 12 into 5.     

Chelated hydrazido(3-)rhenium(V) complexes: on the way to the nitrido-M(V) core (M = Tc, Re)

Neutral and asymmetrical hydrazido(3-)rhenium(V) heterocomplexes of the type [Re(eta(2)-L(4))(L(n))(PPh(3))] (eta(2)-L(4) = NNC(SCH(3))S; H(2)L(1) = S-methyl beta-N-((2-hydroxyphenyl)ethylidene)dithiocarbazate, 1, H(2)L(2) = S-methyl beta-N-((2-hydroxyphenyl)methylidene)dithiocarbazate, 2) are prepared via ligand-exchange reactions in ethanolic solutions starting from [Re(V)(O)Cl(4)](-) in the presence of PPh(3) or from [Re(V)(O)Cl(3)(PPh(3))(2)]. The distorted octahedral coordination sphere of these compounds is saturated by a chelated hydrazido group, a facially ligated ONS Schiff base, and PPh(3). Reduction-substitution reactions starting from [NH(4)][Re(VII)O(4)] in acidic ethanolic mixtures containing PPh(3) and H(2)L(n) (or its dithiocarbazic acid precursor H(3)L(4)) produce another example of chelated hydrazido(3-) rhenium(V) derivative, namely [Re(eta(2)-L(4))Cl(2)(PPh(3))(2)], 3. On the contrary, the N-methyl-substituted dithiocarbazic acid H(2)L(3) reacts with perrhenate to give the known nitrido complex [Re(N)Cl(2)(PPh(3))(2)]. Rhenium(V) complexes incorporating the robust eta(2)-hydrazido moiety represent key intermediates helpful for the comprehension of the reaction pathway which generates nitridorhenium(V) species starting from oxo precursors. An essential requirement for the stabilization of such chelated hydrazido-Re(V) units is the triple deprotonation at the hydrazine nitrogens, thereby providing efficient pi-electron circulation in the resulting five-membered ring. The thermal stability of these units is affected by the nature of the anchoring donor, thione sulfur ensuring stronger chelation than nitrogen and oxygen. The eta(2)-hydrazido complexes are characterized by conventional physicochemical techniques, including the X-ray crystal structure determination of 1 and 3.     

Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

Novel rhenium(V) oxo complexes containing bis(pyrazol-1-yl)acetate and bis(pyrazol-1-yl) sulfonate as tripodal N,N,O-heteroscorpionate ligands

Reactions of [NBu4][Re(O)Cl4] with bis(pyrazol-1-yl)methane (bpzm) and bis(pyrazol-1-yl)acetate (Hbpza) and with the lithium salts lithium [bis(3,5-dimethylpyrazol-1-yl)acetate] (Libdmpza) and lithium [bis(3,5-dimethylpyrazol-1-yl)methanesulfonate] (Libdmpzs) produce a series of new compounds containing either a kappa2-N,N bidentate pyrazolyl ligand [Re(O)(bpzm)Cl3 (1), Re(O)(bpzm)(OMe)Cl2 (2), Re(O)(bpzaOMe)(OMe)Cl2 (4)] or a kappa3-N,N,O heteroscorpionate [Re(O)(bpza)Cl2 (3), Re(O)(bdmpza)Cl2 isomers 5 and 6, Re(O)(bdmpza)(OMe)Cl (7), Re(O)(bdmpza)(OEt)Cl (8), Re(O)(bdmpzs)(OMe)Cl (9), Re(O)(bdmpzs)(OEt)Cl (10)]. X-ray analyses of 1 and 3 show in both cases a distorted octahedral environment around the rhenium atom. The nature and the geometry of the products are strongly determined by the reaction solvent and by the heteroscorpionate ligand itself. When scorpionates bear methylated pyrazolyl rings mixed heterocomplexes Re(O)(bdmpza)(glycol) (11) and Re(O)(bdmpzs)(glycol) (12) are obtained (H2glycol = ethylene glycol). Also 11 shows an octahedral geometry as assessed by X-ray study.     

Rhenium ethoxy- and hydroxycarbene complexes with thiophene substituents

Reaction of mono- and dilithiated thiophene (a), bithiophene (b) and 2,5-dibromothiophene (c) with [Re(2)(CO)(10)] afforded, after subsequent alkylation with triethyloxonium tetrafluoroborate, tetra- and binuclear Fischer carbene complexes, [Re(2)(CO)(9){C(OEt){C(4)H(2)S}(n)X}], n = 1, X = H (1a); n = 2, X = H (1b); n = 1, X = Br (1c); n = 1, X = C(OEt)Re(2)(CO)(9), (2a); n = 2, X = C(OEt)Re(2)(CO)(9) (2b), as major products. The dirhenium acylate intermediates from this reaction not only gave the expected novel ethoxycarbene complexes with alkylation but after rhenium-rhenium bond breaking afforded a number of minor products. The (1)H NMR spectrum of the crude reaction mixture revealed the formation of four metal hydride complexes and aldehydes. Protonation with HBF(4) instead of alkylation with Et(3)OBF(4) significantly increased the yields of the hydride complexes, which enabled the positive identification of three of these complexes. In addition to the known compounds [Re(CO)(5)H] and [Re(3)(CO)(14)H] (3), a unique complex displaying a hydroxycarbene fragment connected to an acyl fragment via an O-H···O hydrogen bond and a Re···H···Re bond linking the two Re centers, [(μ-H){Re(CO)(4)C(OH){C(4)H(2)S}(n)H}{Re(CO)(4)C(O){C(4)H(2)S}(n)H}], n = 1 (4a) or n = 2 (4b), were isolated. The formation of thiophene aldehydes, H{C(O)}(m){C(4)H(2)S}(n)C(O)H (m = 0 or 1 and n = 1 or 2), were observed and the novel monocarbene complexes with terminal aldehyde groups, [Re(2)(CO)(9){C(OEt){C(4)H(2)S}(n)C(O)H}], n = 1 (5a) and n = 2 (5b) could be isolated. A higher yield of 5b was obtained after stirring crystals of 2b in wet THF. The crystal structures of 1a, 2a, 4a and 5b are reported.     

Synthesis and characterization of oxorhenium(v) diamido pyridine complexes that catalyze oxygen atom transfer reactions

The detailed syntheses of complexes 1-4, Re(O)(X)(DAP) (X = Me, 1; Cl, 2; I, 3; OTf (triflate), 4) incorporating the diamido pyridine (DAP) ancillary ligand (2,6-bis((mesitylamino)methyl)pyridine) are described and shown to be effective catalysts for oxygen atom transfer (OAT) reactions of PyO to PPh(3). The catalytic activities are as follows: 4≈3 > 2 > 1. The observed electronic trend is consistent with the turnover limiting reduction of the proposed Re(VII) dioxo intermediate, Re(O)(2)(X)(DAP), during the catalytic cycle. The catalytic activity of complexes 1-3 was compared to previously published diamido amine (DAAm) oxorhenium complexes of the type Re(O)(X)(DAAm) (X = Me, 5; Cl, 6; I, 7 and DAAm = N,N-bis(2-arylaminoethyl)methylamine) which exhibit hydrolytic degradation during the catalytic reaction. Complexes 1-3 displayed higher turnover frequencies compared to 5-7. This higher catalytic activity was attributed to the more rigid DAP ligand backbone, which makes the complexes less susceptible to decomposition. However, another decomposition pathway was proposed for this catalytic system due to the observation of Re(O)(3)((MesNCH(2))(MesNCH)NC(5)H(3)) 8 in which one arm of the DAP ligand is oxidized.