Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis,crystal structure characterization and reactivity

Two mononuclear and one dinuclear copper(II) complexes, containing neutral tetradentate NSSN type ligands, of formulation [Cu^II(L¹)Cl]ClO₄ (1), [Cu^II(L²)Cl]ClO₄ (2) and [Cu^II₂(L³)₂Cl₂](ClO₄)₂ (3) were synthesized and isolated in pure form [where L¹ = 1,2-bis(2-pyridylmethylthio)ethane, L² = 1,3-bis(2-pyridylmethylthio)propane and L³ = 1,4-bis(2-pyridylmethylthio)butane]. All these green colored copper(II) complexes were characterized by physicochemical and spectroscopic methods. The dinuclear copper(II) complex 3 changed to a colorless dinuclear copper(I) species of formula [Cu^I₂(L³)₂](ClO₄)₂,0.5H₂O (4) in dimethylformamide even in the presence of air at ambient temperature, while complexes 1 and 2 showed no change under similar conditions. The solid-state structures of complexes 1, 2 and 4 were established by X-ray crystallography. The geometry about the copper in complexes 1 and 2 is trigonal bipyramidal whereas the coordination environment about the copper(I) in dinuclear complex 4 is distorted tetrahedral.     

Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

Syntheses and study on nickel and copper complexes with 1,3,5-benzenetricarboxylic acid. Crystal and molecular structure of [Cu3(mdpta)3(btc)](ClO4)3 · 4H2O

Nickel and copper complexes containing 1,3,5-benzenetricarboxylic acid, with a combination of selected N-donor ligands and Schiff bases, of the composition Ni₃(bimz)₆(btc)₂ · 12H₂O (1), Ni₃(btz)₉(btc)₂ · 12H₂O (2), Ni₂(L₁)(btc) · 7H₂O (3), Ni₃(L₂)₂(Hbtc) · 9H₂O (4), Ni₂(L₃)(btc) · 4H₂O (5), Cu₂(L₄)(btc) · 7H₂O (6), [Cu₃(pmdien)₃(btc)](ClO₄)₃ · 6H₂O (7) and [Cu₃(mdpta)₃(btc)](ClO₄)₃ · 4H₂O (8); H₃btc = 1,3,5-benzenetricarboxylic acid, bimz = benzimidazole, btz = 1,2,3-benztriazole, L₁ = 2-[(phenylimino)methyl]phenol, L₂ = N,N′-bis-(salicylidene)propylenediamine, L₃ = 2-{[(2-nitrophenyl)methylene]amino}phenol, L₄ = 2-[(4-methoxy-phenylimino)methyl]phenol, pmdien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, mdpta = N,N-bis-(3-aminopropyl)methylamine, have been synthesized. The complexes have been studied by elemental analysis, IR, UV–Vis spectroscopies, magnetochemical and conductivity measurements and selected compounds also by thermal analysis. The crystal and molecular structure of complex 8 was solved. The complex is trinuclear with btc³⁻-bridge. The coordination polyhedron around each copper atom can be described as a distorted square with a CuON₃ chromophore formed by one oxygen atom of carboxylate and three nitrogen atoms of mdpta. The magnetic properties of 8 have been studied in the 1.8–300 K temperature range revealing a very weak antiferromagnetic exchange interaction with J = −0.56 cm⁻¹ for g = 2.13(9). The antimicrobial activities against selected strains of bacteria were evaluated. It was found that only complex 5 is able to inhibit the growth of Staphylococcus strains.     

Self assembly of asymmetric tetranuclear Cu(II) [2 × 2] grid-like complexes and of a dinuclear Ni(II) complex from pyridyl-phenol Schiff base ligands

Self assembly of N-salicylidene 2-aminopyridine (L1H) with Cu(NO₃)₂·3H₂O affords [Cu₄(L1)₄(NO₃)₃(CH₃OH)][Cu(L1)(NO₃)₂](2-aminopyridinium)(NO₃)·5CH₃OH (1) which is composed of an asymmetric [2 × 2] grid-like cationic complex that co-crystallizes with a Cu(II) mononuclear anion. This remarkable tetranuclear unit presents three penta-coordinated and one hexa-coordinated Cu(II) sites. This quadruple helicate structure reveals strong anti-ferromagnetic coupling (J = −340(2) cm⁻¹) between Cu(II) ions through a double alkoxo bridge. Reacting L1H with Cu(NO₃)₂·3H₂O in slightly different conditions affords however a more symmetric tetranuclear grid-like complex: [Cu₄(L1)₄(NO₃)₂(OH)₂](2-aminopyridinium)(OH)·CH₃OH) (2). A dinuclear Ni(II) complex, [Ni₂(L2)₂(L2H)₂(NCS)₂(CH₃OH)₂]·2CH₃OH (3), obtained with another related donor ligand (L2H = N-salicylidene 3-aminomethylpyridine) was also prepared.     

Supramolecular 2D structures in [M(NCS)2(bpe)2(H2O)2] (M = Mn, Fe) systems connected by hydrogen bonds

Here we report the synthesis and characterization by X-ray diffraction, FTIR, UV-Vis and EPR spectroscopies, and the magnetic measurements of two new compounds: [Mn(NCS)₂(bpe)₂(H₂O)₂] (1) and [Fe(NCS)₂(bpe)₂(H₂O)₂] (2) (bpe = 1,2-bis(4-pyridyl)ethylene). Single-crystal structure analyses reveals discrete octahedral metal units that are assembled into 2D sheets through O-Hw?N(bpe) and O-Hw?S(thiocyanate) hydrogen bonds. The intermetallic M?M distances are 6.90 and 6.87 Å for 1 and 2, respectively. Supramolecular architectures are obtained by connections through H-bonds. Slight interactions are observed for compound 2.     

Direct functionalization of the cyclometalated 2-(2′-pyridyl)phenyl ligand bound to iridium(III)

Treatment of [Ir(ppy)₂(μ-Cl)]₂ and [Ir(ppy)₂(dtbpy)][OTf] (ppy = 2-(2′-pyridyl)phenyl; dtbpy = 4,4′-di-tert-butyl-2,2′-bipyridine; OTf = triflate) with pyridinium tribromide in the presence of Fe powder led to isolation of [Ir(4-Br-ppy)(μ-Br)]₂ (1) and [Ir(4-Br-ppy)₂(dtbpy)][OTf] (2), respectively. Pd-catalyzed cross-coupling of 2 with RB(OH)₂ afforded [Ir(4-R-ppy)₂(dtbpy)][OTf] (R = 4′-FC₆H₄ (3)), 4′-PhC₆H₄ (4), 2′-thienyl (5), 4′-C₆H₄CH₂OH (6). Treatment of 4 with B₂(pin)₂ (pin = pinacolate) afforded [Ir{4-(pin)B-ppy}₂(dtbpy)][OTf] (7). The alkynyl complexes [Ir(4-PhCC-ppy)₂(dtbpy)][OTf] (8) and [Ir{4-Me₂(OH)CC-ppy}(4-Br-ppy)(dtbpy)][OTf] (9) were prepared by cross-coupling of 2 with PhCCSnMe₃ and Me₂C(OH)CCH, respectively. Ethynylation of [Ir(fppy)₂(dtbpy)][OTf] (fppy = 5-formyl-2-(2′-pyridyl)phenyl) with Ohira’s reagent MeCOC(N₂)P(O)(OEt)₂ afforded [Ir{5-HCC-ppy}₂(dtbpy)][OTf] (10). The solid-state structures of 2, 5, 7, and 10 have been determined.     

Syntheses, crystal structures of a series of copper(II) complexes and their catalytic activities in the green oxidative coupling of 2,6-dimethylphenol

Three mixed-ligand Cu^II complexes bearing iminodiacetato (ida) and N-heterocyclic ligands, namely, [Cu₂(ida)₂(bbbm)(H₂O)₂] · H₂O (1), [Cu₂(ida)₂(btx)(H₂O)₂] · 2H₂O (2) and [Cu₂(ida)₂(pbbm)(H₂O)₂] · H₂O · 3CH₃OH (3) (bbbm = 1,1^′-(1,4-butanediyl)bis-1H-benzimidazole, btx = 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene, pbbm = 1,1^′-(1,3-propanediyl)bis-1H-benzimidazole), in addition to three fcz-based Cu^II complexes, namely, {[Cu(fcz)₂(H₂O)₂] · 2NO₃}_n (4), {[Cu(fcz)₂(H₂O)] · SO₄ · DMF · 2CH₃OH · 2H₂O}_n (5) and {[Cu(fcz)₂Cl₂] · 2CH₃OH}_n (6) (fcz = 1-(2,4-difluorophenyl)-1,1-bis[(1H-1,2,4-triazol-l-yl) methyl]ethanol) have been prepared according to appropriate synthetic strategies with the aim of exploiting new and potent catalysts. Single crystal X-ray diffraction shows that 1 and 2 possess similar binuclear structures, 3 features a 2D pleated network, and 4 exhibits a 1D polymeric double-chain structure. Complexes 1-6 are tested as catalysts in the green catalysis process of the oxidative coupling of 2,6-dimethylphenol (DMP). Under the optimized reaction conditions, these complexes are catalytically active by showing high conversion of DMP and high selectivity of PPE. The preliminary study of the catalytic-structural correlations suggests that the coordination environment of the copper center have important influences on their catalytic activities.     

Synthesis,crystal structures and spectra of Hg(II)-1,2-bis(diphenylphosphino)ethane monoxide complexes: Monomer and polymer formation

The reaction of mercury(II) halides with 1,2-bis(diphenylphosphino)ethane monoxide (dppeO) in 1:1 molar ratio yielded P,O-coordinated polymers having the empirical formula [HgX₂(dppeO)]_n [X = Cl (1), Br (2), I (3)]. In contrast, the reaction between the same reactants in a 1:2 molar ratio yielded the P, P-coordinated monomeric complexes, HgX₂(dppeO)₂[X = Cl (4), Br (5), I (6)]. The structures of 2, 3, 4 and 5 have been characterized crystallographically. The results indicate that the geometry around the mercury atom in each of these molecules is tetrahedral with considerable distortion. The ³¹P NMR spectra of the 1:1 complexes indicate the dissociation of the Hg–O bond in solution.     

Five-membered ring chelate complexes of Ni(II), Pd(II) and Pt(II) derived of di-(2-pyridyl)-N-ethylimine

Cis-diaquobis{di-(2-pyridyl)-N-ethylimine}nickel(II) chloride (2) was obtained from the reaction of di-(2-pyridyl)-N-ethylimine (1) and [NiCl₂dppe] [dppe = cis-1,2-bis(diphenylphosphino)ethylene] in a 2:1 ratio in hot acetonitrile. Cis-dichloro{di-(2-pyridyl)-N-ethylimine}palladium(II) (3) and cis-dichloro{di-(2-pyridyl)-N-ethylimine}platinum(II) (4) complexes were obtained from the reaction of MCl₂ (M = Pd, Pt) and (1) in equimolar ratio in hot acetonitrile. Compounds 1–4 were characterized by IR spectroscopy, elemental analysis, and mass spectrometry; the complexes 3 and 4 were characterized in solution by NMR. In addition, solid state structures of compounds 1–4 were determined using single crystal X-ray diffraction analyses. X-ray diffraction data of the complexes 3 and 4 showed a distorted square planar local geometry at palladium and platinum atoms with the chlorine atoms in a cis-coordination; in 2 a local octahedral geometry at nickel atom was observed. Complexes 3 and 4 are arranged as dimers with a M?M distance of 3.4567(4) Å (M = Pd) and 3.4221(4) Å (M = Pt), respectively; 2 consists of units linked by intermolecular hydrogen bonding.     

Architecture of zero-, one-, two- and three-dimensional structures based on metal ions and pyrazine-2,6-dicarboxylic acid

Six new complexes: [Ln₂(pzda)₃(H₂O)₂] · 2.5H₂O (Ln = Nd, (1); Eu, (2)), [Co(pzda) (bpe)] · 0.125(bpe) · 1.75H₂O (3), [Mn(pzda)(H₂O)_1.5] (4), [Co₂(pzda)₂(bpe)(H₂O)₄] · 0.5(CH₃OH) · H₂O (5) and [Co(pzda)(2,2′-bpy)(H₂O)] · 0.5H₂O (6) (H₂pzda = pyrazine-2,6-dicarboxylic acid, bpe = 1,2-bis(4-pyridyl)ethane, 2,2′-bpy = 2,2′-bipyridine) were obtained from metal salts and H₂pzda under hydro(solvo)thermal conditions. The single crystal X-ray structural analysis reveals that the title complexes have different structures, ranging from zero- to three- dimensions, which are mainly due to the different metal ions, and especially the coordination modes of the pzda ligands. Complexes 1 and 2 have 3D metal-organic frameworks containing a 1D tri-strand array, in which the pzda ligand adopts a pentadentate mode to link lanthanide ions. Complex 3 has a 2D metal-organic framework, in which the pzda ligand acts in a tetradentate mode to connect Co(II) ions into 1D chains, which are further connected by bpe spacers into a 2D framework. While in 4, both of the two carboxylate groups of the pzda ligand adopt μ₂-O bridging modes to link Mn(II) ions into a 1D coordination polymer, which is further assembled into a 2D supramolecular network containing double-stranded hydrogen-bonded helical chains. In both 5 and 6, the pzda ligand binds metal ions as a tridentate ligand (ONO mode) to form zero dimensional structures. Complex 5 is a binuclear molecule, while 6 is a mononuclear complex, which can be attributed to the bridging ligand bpe for 5 and the terminal auxiliary ligand 2,2′-bpy for 6.     

Photochemistry of tris(pyrazolyl)borate titanium(IV) complexes

The electronic features and photochemistry of TpTiCl₃ (1) (Tp = hydrotris(pyrazol-1-yl)borate) and Tp*TiCl₃ (2) (Tp* = hydrotris(3,5-dimethylpyrazol-1-yl)borate) were studied in THF. Reactive decay of the excited states produced either (or ) and metal center Ti(III) radicals via homolytic cleavage of the Tp → Ti (Tp* → Ti) bond. Cleavage of the Tp → Ti and the Tp* → Ti bond as a primary photoprocess is shown to be consistent with LMCT Tp → Ti and Tp* → Ti excitation. TpTiCl₂(THF) (3) and Tp*TiCl₂(THF) (4) were also prepared by stoichiometric reduction of 1 and 2 with Li₃N. The THF ligand in 3 and 4 was replaced by the stable nitroxyl radical TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) to provide the new complexes TpTiCl₂(TEMPO) (5) and Tp*TiCl₂(TEMPO) (6) in which the TEMPO ligand is η¹ coordinated to Ti(IV). Photolysis of 5 and 6 generate Ti(III) and the TEMPO radical in the primary photochemical step.     

Nickel(II) and copper(II) complexes of unsymmetrical tetradentate reduced Schiff base ligands

Two new reduced Schiff base ligands, [HL¹ = 4-{2-[(pyridin-2-ylmethyl)-amino]-ethylimino}-pentan-2-one and HL² = 4-[2-(1-pyridin-2-yl-ethylamino)-ethylimino]-pentan-2-one] have been prepared by reduction of the corresponding tetradentate unsymmetrical Schiff bases derived from 1:1: 1 condensation of 1,2-ethanediamine, acetylacetone and pyridine-2-carboxaldehyde/2-acetyl pyridine. Four complexes, [Ni(L¹)]ClO₄ (1), [Cu(L¹)]ClO₄ (2), [Ni(L²)]ClO₄ (3), and [Cu(L²)]ClO₄ (4) with these two reduced Schiff base ligands have been synthesized and structurally characterized by X-ray crystallography. The mono-negative ligands L¹ and L² are chelated in all four complexes through the four donor atoms to form square planar nickel(II) and copper(II) complexes. Structures of 3 and 4 reveal that enantiomeric pairs are crystallized together with opposite chirality in the nitrogen and carbon atoms. The two Cu^II complexes (2 and 4) exhibit both irreversible reductive (Cu^II/Cu^I; E_pc, −1.00 and −1.04 V) and oxidative (Cu^II/Cu^III; E_pa, +1.22 and +1.17 V, respectively) responses in cyclic voltammetry. The electrochemically generated Cu^I species for both the complexes are unstable and undergo disproportionation.     

Syntheses,structures and luminescent properties of four copper(I) cyanide coordination polymers based on 2-(n-pyridyl)benzimidazole ligands (n = 2, 3, 4)

Four copper(I) cyanide coordination polymers containing 2-(n-pyridyl)benzimidazole ligands, namely [Cu₂(CN)(2-PyBIm)]_n (1), [Cu₂(CN)₂(3-PyHBIm)]_n (2), {[Cu₃(CN)₃(4-PyHBIm)₄] · 2H₂O}_n (3) and [Cu₅(CN)₃(4-PyBIm)₂]_n (4), have been synthesized and characterized by X-ray crystallography. Complex 1 is a one-dimension coordination polymer in which 2-(2-pyridyl)benzimidazole is deprotonated and adopts a bridging tridentate coordination mode. Complex 2 has ladder-like structure in which 2-(3-pyridyl)benzimidazole does not deprotonate and acts as a bidentate bridge. Complex 3 displays a saddle-shaped helical chain constructed through μ₂-cyanide group and the outstretched neutral 2-(4-pyridyl)benzimidazole monodentate ligand. Complex 4 shows two-dimension layer polymeric structure in which deprotonated 2-(4-pyridyl)benzimidazole acts as a tridentate bridging ligand. The cyanide groups in four complexes all act as bidentate bridging ligands. These complexes are thermal stable and display luminescence in the solid states.     

Synthesis and structural characterization of organotin(IV) carboxylates based on different heterocyclic substituents

Six novel organotin(IV) carboxylates have been successfully synthesized, namely, the polymer (C₆H₅)₃Sn(L1)_∞ (1) [HL1 = 4-imidazolyl benzoic acid], the mononuclear (C₆H₅)₃Sn(L2) (2) [HL2 = 4-pyrazolylbenzoic acid], (C₆H₅)₃Sn(L3)·CH₃OH (3) [HL3 = 4-triazolylbenzoic acid] and (C₆H₅)₃Sn(L4) (4) [HL4 = 4-tetrazolyl benzoic acid] and the tetranuclear [(n-Bu₂Sn)₄(L2)₂O₂(OCH₃)₂] (5) and [(n-Bu₂Sn)₄(L3)₂O₂(OCH₃)₂] (6). X-ray diffraction analyses show 1D infinite chain of polymer 1, single molecular structures of isomorphous complexes 2 and 4, single molecule structures of complex 3 containing solvent CH₃OH molecule and similar ladder-type structures of complexes 5 and 6. The photoluminescence of ligands and 1-6 were also measured in the solid state at room temperature.     

The effect of titanium alkoxides in the synthesis of heterobimetallic complexes by titanocene(III) alkoxide-induced metal-metal bond cleavage of metal carbonyl dimers

A series of titanocene(III) alkoxides L₂Ti(III)OR where L = Cp, R = Et(1b), ^tBu(1a), 2,6-Me₂C₆H₃(1c), 2,6-^tBu₂-4-Me-C₆H₂(1d), or L = Cp*, R = Me(2e), ^tBu(2a), Ph(2f) was synthesized and subjected to reaction with [CpM(CO)₃]₂ [M = Mo, W], [CpRu(CO)₂]₂, and Co₂(CO)₈. The Ti(III) precursors 1a, 1c, 2a, 2e, and 2f reacted with [CpM(CO)₃]₂ [M = Mo, W] to form heterobimetallic complexes L₂Ti(OR)(μ-OC)(CO)₂MCp [M = Mo, W], of which Ti and M are linked by an isocarbonyl bridge. Reactions of these Ti(III) complexes with Co₂(CO)₈ resulted in formation of Ti-Co₁ heterobimetallic complexes, from 2a, 2e, or 2f, or Ti-Co₃ tetrametallic complexes, Cp₂Ti(O^tBu)(μ-OC)Co₃(CO)₉ from 1a, 1b, or 1c. The products were characterized by NMR, IR, and X-ray crystallography. Reaction mechanisms were proposed from these results, in particular, from steric/electronic effects of titanium alkoxides.     

Copper(II) complexes with 2,5-bis(2-pyridyl)pyrazine and 1,1,3,3-tetracyano-2-ethoxypropenide anion: Syntheses,crystal structures and magnetic properties

The copper(II) complexes of formula [Cu₂(2,5-dpp)(H₂O)₄(CF₃SO₃)₄] · 2H₂O (1) and [Cu₂(2,5-dpp)(H₂O)₂(tcnoet)₄]_n (2) [2,5-dpp = 2,5-bis(2-pyridyl)pyrazine and tcnoet⁻ = 1,1,3,3-tetracyano-2-ethoxypropenide anion] have been prepared and their structures determined by X-ray crystallographic methods. Compound 1 is a dinuclear complex where the 2,5-dpp molecule acts as a bis-bidentate bridge between the two copper centers, the electroneutrality being achieved by four terminally bound triflate anions. Each copper(II) ion presents an elongated octahedral CuN₂O₄ environment with two nitrogen atoms from 2,5-dpp and two water molecules in the basal plane and two triflate-oxygen atoms in the axial positions. Compound 2 is a zigzag chain of copper(II) ions with regular alternating 2,5-dpp and double tcnoet groups as bridges. Each copper(II) ion exhibits an elongated octahedral CuN₅O surrounding with four nitrogen atoms, two from 2,5-dpp, one from a terminally bound tcnoet and the other from a bridging tcnoet occupying the equatorial positions and a water oxygen and a nitrogen from a monodentate tcnoet in the axial sites. The values of the copper–copper separation across 2,5-dpp are 6.763(1) (1) and 6.754(1) Å (2) whereas that through the double tcnoet bridge is 9.559(1) Å (2). The investigation of the magnetic properties of 1 and 2 in the temperature range 1.9–295 K reveal a Curie law behaviour for 1 and a very weak ferromagnetic interaction for 2. The poor ability of the 2,5-dpp ligand to mediate magnetic interactions between the copper(II) ions in the 2,5-dpp-bridged copper(II) complexes contrast with the somewhat better ability of the pyrazine ring in related pyrazine-bridged copper(II) complexes.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Network diversity and supramolecular isomerism in copper(II)/1,2-bis(4-pyridyl)ethane coordination polymers

Reactions of copper(II) sources with 1,2-bis(4-pyridyl)ethane (bpe) yielded metal-organic networks with diverse topologies and dimensionalities. Compounds [Cu(bpe)₂(dmf)₂]_n(ClO₄)_2n·2ndmf (1·2ndmf), [Cu(bpe)₂(dmf)₂]_n(ClO₄)_2n·3.5ndmf (2·3.5ndmf), [Cu(bpe)₂(NO₃)₂]_n·2nH₂O (4·2nH₂O) and [Cu₂(bpe)(O₂CMe)₄]_n·0.7nH₂O (5·0.7nH₂O) have been isolated by altering the copper(II) source, the reaction solvent and the crystallization process. Compounds 1·2ndmf and 2·3.5ndmf consist of cationic [Cu(bpe)₂(dmf)₂]²⁺ repeating units assembled to 1D and 2D (4,4) networks, respectively, and represent supramolecular isomers due to the conformational isomerism of the bridging bpe molecules. Compound 4·2nH₂O consists of neutral mononuclear [Cu(dpe)₂(NO₃)₂] repeating units assembled to inclined interpenetrating (4,4) sheets describing an overall entanglement that is 3D in nature, and compound 5·0.7nH₂O consists of neutral dinuclear repeating units assembled to cross-linked 1D chains.     

R-phenyldicarboxyl (R = H, NO2 and COOH) modular effect on Ni(II) coordination polymers incorporated with a versatile connector 1H-3-(3-pyridyl)-5-(4-pyridyl)-1,2,4-triazole

Based on the versatile ligand 1H-3-(3-pyridyl)-5-(4-pyridyl)-1,2,4-triazole (3,4′-Hbpt) (1), a series of coordination compounds [Ni(3,4′-Hbpt)(ip)] (2), [Ni(3,4′-Hbpt)₂(tp)(H₂O)₂] (3), [Ni₂(3,4′-Hbpt)(5-NO₂-ip)₂(H₂O)₄] (4) and [Ni(3,4′-Hbpt)(pm)_0.5(H₂O)₃]·2H₂O (5) have been hydrothermally constructed through R-phenyldicarboxyl (R = H, NO₂ and COOH) intervention effect (ip = isophthalic anion, tp = terephthalic anion, 5-NO₂-ip = 5-NO₂-isophthalic anion, pm = pyromellitic anion). Structural analysis reveals that 3,4′-Hbpt adopts μ-N_py, N_py coordination modes in two typical conformations in these target coordination compounds. In cooperation with the auxiliary ligands benzenedicarboxylate connectors, a variety of Ni(II) coordination networks such as 2-D layer with (4, 4) topology (2) 1-D chain (3), honeycomb (4) and 2-D helical chains (5) have been assembled. Theoretical calculation based on density functional theory (DFT) for ligand (1) is also employed to explicate the stability of the different conformations. Moreover, thermal stability of these crystalline materials is explored by TG-DTG.     

Complexes derived from the general copper(II)/maleamic acid/N,N′,N′′-chelate reaction systems: Synthetic,reactivity, structural and spectroscopic studies

The synthetic investigation of the Cu^II/maleamate(−1) ion (HL⁻)/N,N′,N′′-chelate general reaction system has allowed access to compounds [Cu₂(HL)₂(bppy)₂](ClO₄)₂·H₂O (1·H₂O), [Cu(HL)(bppy)(ClO₄)] (2) and [Cu(HL)(terpy)(H₂O)](ClO₄) (4) (bppy = 2,6-bis(pyrazol-1-yl)pyridine, terpy = 2,2′;6′,2′′-terpyridine). In the absence of externally added hydroxides, compound [Cu₂(L′)₂(bppy)₂](ClO₄)₂ (3) was obtained from MeOH solutions; L′⁻ is the monomethyl maleate(−1) ligand which is formed in situ via the Cu^II-assisted HL⁻ → L′⁻ transformation. In the case of tptz-containing (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) reaction systems, the Cu^II-assisted hydrolysis of tptz to pyridine-2-carboxamide (L1) afforded complex [Cu(L1)₂(NO₃)₂] (5). The crystal structures of 1–5 are stabilized by intermolecular hydrogen bonding and π–π stacking interactions. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.