Towards disposable lab-on-a-chip: poly(methylmethacrylate) microchip electrophoresis device with electrochemical detection

A fully disposable microanalytical device based on combination of poly(methylmethacrylate) (PMMA) capillary electrophoresis microchips and thick-film electrochemical detector strips is described. Variables influencing the separation efficiency and amperometric response, including separation voltage or detection potential are assessed and optimized. The versatility, simplicity and low-cost advantages of the new design are coupled to an attractive analytical performance, with good precision (relative standard deviation RSD = 1.68% for n = 10). Applicability for assays of mixtures of hydrazine, phenolic compounds, and catecholamines is demonstrated. Such coupling of low-cost PMMA-based microchips with thick-film electrochemical detectors holds great promise for mass production of single-use micrototal analytical systems.     

Capillary electrophoresis-chemiluminescence detection system equipped with a consecutive sample-injection device.

We have developed a consecutive sample-injection device for capillary electrophoresis, which comprises one four-way cock, two syringe pumps, and an interface part taking advantage of two three-way Teflon joints. Sample introduction into the capillary is made hydrodynamically by pressure, caused by the flow of the sample solution at the tip of the capillary inlet. We combined the injection device with a capillary electrophoresis-chemiluminescence detection system. A mixture solution of N-(4-aminobutyl)-N-ethylisoluminol, isoluminol isothiocyanate, and luminol was analyzed as a model sample by the present system. The sample solution was consecutively injected and detected with about a 230 s interval. The present capillary electrophoresis-chemiluminescence detection system with the consecutive sample injection device features easy and rapid operation, an inexpensive apparatus, high sensitivity, as well as consecutive analysis.     

Measurement of testosterone with a high-performance liquid chromatograph equipped with a flow-through ultraviolet spectrophotometer

A technique is described for measuring nanogram amounts of testosterone using high-performance liquid chromatography with detection by a flow-through spectrophotometer. The addition of a non-radioisotopic internal standard (4-androsten-11 beta-ol-3,17-dione) to the biological specimen automatically corrects for testosterone losses due to extraction and non-quantitative sample injection into the high-performance liquid chromatograph. This new method, which can be performed by inexperienced personnel, is shown to be rapid, precise, accurate and specific for testosterone.     

Development of an element-selective monitoring system for adsorbable organic halogens (AOX) with plasma emission spectrometric detection for quasi-continuous waste-water analysis

An automated quasi-continuously-operating monitor has been developed for element-selective analysis of adsorbable organic halogens (AOX) in water. After extensive optimization the automatic method was applied to the analysis of standard solutions and real waste water samples to prove its analytical applicability. The new instrument is based on the element-selective analysis of halogens by means of a spectroscopic detection system consisting of a microwave-induced helium plasma excitation source (TM010-type; developed in this laboratory) and the plasma emission detector (PED) which operates with oscillating narrow-band interference filters. After enriching the organic components on activated charcoal and pyrolysis in an oxygen stream at 950 degrees C, in accordance with DIN/EN 38409,H14/1485, interfering CO2 and H2O gas generated during combustion is removed from the analytes in the so-called ELSA-system (element-selective AOX-analyzer). For focused injection into the plasma excitation source the analytes (hydrogen halides) are trapped in a deactivated fused silica capillary at -180 degrees C; this is followed by identification and quantification on the basis of element-specific emission of radiation in the VIS and NIR-region (chlorine 837.6 nm, fluorine 685.6 nm). Bromine and iodine could not be detected with satisfactory inter-element selectivity, because of spectral interferences caused by matrix elements, and so results from the respective single-element investigations for determination of AOBr and AOI are not presented. The procedure has been validated and the analytical performance has been examined by calibration with p-chlorophenol and p-fluorophenol. The limit of detection was 1.1 microg (absolute) for chlorine and 6.6 microg (absolute) for fluorine.     

A radiofrequency plasma in a polydimethylsiloxane (PDMS) microchip

This is the first report of an analytical plasma in a polymer (polydimethylsiloxane, PDMS) microchip. The plasma channel has dimensions 2 mm diameter × 50 mm long, is operated at atmospheric pressure in Ar, 27.12 MHz and 70 W, and is viewed axially through a purged fiber optic cable. CF₄ gas at 0.1% in argon yields mainly C₂ emission bands. This PDMS microchip is manufactured easily, inexpensive, and more tolerant to fluorocarbons than microchip plasmas in silica. Based on these initial results, this PDMS microchip plasma could become useful as a sensor for the fluorocarbon gases emitted in semiconductor process or as a gas chromatography (GC) detector for potential application.     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.     

Fabrication and performance of a three-dimensionally adjustable device for the amperometric detection of microchip capillary electrophoresis

A microchip CE-amperometric detection (AD) system has been fabricated by integrating a two-dimensionally adjustable CE microchip and an AD cell containing a one-dimensionally adjustable disk detection electrode in a Plexiglas holder. It facilitates the precise 3-D alignment between the channel outlet and the detection electrode without a complicated 3-D manipulator. The performance of this unique system was demonstrated by separating five aromatic amines (1,4-phenyldiamine, aniline, 2-methylaniline, 4-chloroaniline, and 1-naphthylamine) of environmental concern. Factors influencing their separation and detection processes were examined and optimized. The five analytes have been well separated within 140 s in a 74 cm long separation channel at a separation voltage of +2500 V using a 10 mM phosphate buffer (pH 3.5). Highly linear response is obtained for the five analytes over the range 20-200 microM with the detection limits ranging from 0.46 to 1.44 microM, respectively. The present system demonstrated long-term stability and reproducibility with RSDs of less than 5% for the peak current (n = 9). The new approach for the microchannel-electrode alignment should find a wide range of applications in CE, flowing injection analysis, and other microfluidic analysis systems.     

On-line coupling of a microelectrode array equipped poly(dimethylsiloxane) microchip with an integrated graphite electrospray emitter for electrospray ionisation mass spectrometry

A novel method for the manufacturing of microchips for on-chip combinations of electrochemistry (EC) and sheathless electrospray ionisation mass spectrometry (ESI-MS) is described. The technique, which does not require access to clean-room facilities, is based on the incorporation of an array of gold microcoil electrodes into a poly(dimethylsiloxane)(PDMS) microflow channel equipped with an integrated graphite based sheathless ESI emitter. Electrochemical measurements, which were employed to determine the electroactive area of the electrodes and to test the microchips, show that the manufacturing process was reproducible and that the important interelectrode distance in the electrochemical cell could to be adequately controlled. The EC-ESI-MS device was evaluated based on the ESI-MS detection of the oxidation products of dopamine. The results demonstrate that the present on-chip approach enables full potentiostatic control of the electrochemical cell and the attainment of very short transfer times between the electrochemical cell and the electrospray emitter. The transfer times were 0.6 and 1.2 s for flow rates of 1.0 and 0.5 microL min(-1), respectively, while the electrochemical conversion efficiency of the electrochemical cell was found to be 30% at a flow rate of 0.5 microL min(-1). To decouple the electrochemical cell from the ESI-MS high voltage and to increase the user-friendliness, the on-line electrochemistry-ESI-MS experiments were performed using a wireless Bluetooth battery-powered instrument with the chip floating at the potential induced by the ESI high voltage. The described on-chip EC-ESI-MS device can be used for fundamental electrochemical investigations as well as for applications based on the use of electrochemically controlled sample pretreatment, preconcentration and ionisation steps prior to ESI-MS.     

Poly(methylmethacrylate) and Topas capillary electrophoresis microchip performance with electrochemical detection

A capillary electrophoresis (CE) microchip made of a new and promising polymeric material: Topas (thermoplastic olefin polymer of amorphous structure), a cyclic olefin copolymer with high chemical resistance, has been tested for the first time with analytical purposes, employing an electrochemical detection. A simple end-channel platinum amperometric detector has been designed, checked, and optimized in a poly-(methylmethacrylate) (PMMA) CE microchip. The end-channel design is based on a platinum wire manually aligned at the exit of the separation channel. This is a simple and durable detection in which the working electrode is not pretreated. H(2)O(2) was employed as model analyte to study the performance of the PMMA microchip and the detector. Factors influencing migration and detection processes were examined and optimized. Separation of H(2)O(2) and L-ascorbic acid (AsA) was developed in order to evaluate the efficiency of microchips using different buffer systems. This detection has been checked for the first time with a microchip made of Topas, obtaining a good linear relationship for mixtures of H(2)O(2) and AsA in different buffers.     

An echelle polychromator for inductively coupled plasma optical emission spectroscopy with vacuum ultraviolet wavelength coverage and charge injection device detection

The development and evaluation of a simultaneous inductively coupled plasma optical emission spectrometer with vacuum ultraviolet (VUV) wavelength coverage and charge injection device (CID) detection are described. The spectrometer is an echelle polychromator with a magnesium fluoride prism as a cross-disperser. A thin coating of Lumogen, used as a wavelength conversion phosphor, is applied to the surface of the CID detector. The Lumogen coating increases sensitivity in the VUV region dramatically. Wavelengths between 130 and 800 nm can be measured by this spectrometer. A measured spectral bandwidth of 0.006 nm at 134.724 nm is achieved. The analytical performance in radial viewing mode is evaluated. The 3σ detection limit measured for Cl at 134.724 nm in aqueous solution is 100 ng ml⁻¹.     

Fabrication and evaluation of single- and dual-channel (Pi-design) microchip electrophoresis with electrochemical detection

A new dual-channel microchip capillary electrophoresis (MCE) has been developed on glass substrates for the first time with electrochemical detection. Dual-channel (called Pi-design) as well as single-channel microchips have been fabricated on soda-lime glass using photolithography, wet etching and thermal bonding. Moreover, a laser writing system has been applied for the fabrication of photomasks with the different microchip designs (single- and dual-channel configurations). The microfabricated channels have been characterized by optical, confocal and scanning electron microscopy. The resulting single- and dual-channel microchips have been evaluated using an end-channel amperometric detector based on one (single-channel) or two (dual-channel) 100-mum gold wires aligned at the outlet of the separation channel. Parameters affecting the separation of several phenolic compounds (dopamine, p-aminophenol and hydroquinone) have been studied in the glass microchips. Thus, the influence of separation voltage, detection potential and background electrolyte has been examined in the single-channel microchip. Different total length microchannel has been compared. Furthermore, the possibility of carrying out two simultaneous measurements has been demonstrated in the new dual-channel microchip electrophoresis. The injection format has been checked and resulted to be critical, in such a way that a special and new form is employed for obtaining simultaneous signals at both channels. Analytical characteristics, such as sensitivity and reproducibility have been evaluated and resulted very adequate.     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.     

Development of a PDMS‐based microchip electrophoresis device for continuous online in vivo monitoring of microdialysis samples

A PDMS‐based microfluidic system for online coupling of microdialysis sampling to microchip electrophoresis with fluorescence detection for in vivo analysis of amino acid neurotransmitters using naphthalene‐2,3‐dicarboxaldehyde and sodium cyanide as the derivatization reagents is described. Fabricating chips from PDMS rather than glass was found to be simpler and more reproducible, especially for chips with complex designs. The microchip incorporated a 20‐cm serpentine channel in which sample plugs were introduced using a “simple” injection scheme; this made fluid handling and injection on‐chip easier for the online system compared with gated or valve‐based injection. The microchip was evaluated offline for the analysis of amino acid standards and rat brain microdialysis samples. Next, precolumn derivatization was incorporated into the chip and in vivo online microdialysis‐microchip electrophoresis studies were performed. The system was employed for the continuous monitoring of amino acid neurotransmitters in the extracellular fluid of the brain of an anesthetized rat. Fluorescein was dosed intravenously and monitored simultaneously online as a marker of in vivo blood–brain barrier permeability. The microdialysis‐microchip electrophoresis system described here will be employed in the future for simultaneous monitoring of changes in blood–brain barrier permeability and levels of amino acid neurotransmitters in the rat stroke model.     

Microcolumn high pressure liquid chromatography with a glass-frit nebulizer interface for plasma emission detection

Microcolumn high pressure liquid chromatography (micro-HPLC) is rapidly gaining recognition as a practical separation tool for organometallic compounds. The use of the inductively coupled plasma (ICP) as a detector for micro-HPLC is studied. Several miniaturized glass-frit nebulizers are investigated as interfaces between the output of the microbore column and the ICP torch. Their performance with aqueous and methanolic solutions is evaluated by direct nebulization and flow injection analysis. The most efficient of these nebulizers is used in the micro-HPLC/ICP study of some Cd, Pb, and Zn organometallic compounds. Detection limits of 1.92 ng of Pb for tetramethyllead and 5.01 ng of Pb for tetraethyllead are obtained and compared with regular HPLC/ICP of these same compounds. Approximately equivalent detection limits were obtained when using a microwave induced plasma as an alternate plasma source.     

Poly(dimethylsiloxane) microchip capillary electrophoresis with electrochemical detection for rapid measurement of acetaminophen and its hydrolysate

Poly(dimethylsiloxane) microchip capillary electrophoresis with amperometric detection has been used for rapid separation and determination of acetaminophen and its hydrolysate, i.e. p-aminophenol. A Pt ultramicroelectrode with a diameter of 10 m positioned at the outlet of the separation channel was used as a working electrode for amperometric detection. Factors influencing separation and detection were investigated and optimized. Results show that acetaminophen and p-aminophenol can be well separated within 35 s with RSD<1% for migration time and <7% for detection current for both analytes. Detection limits for both analytes are estimated to be 5.0 mol L^–1 (approximately 0.1 fmol) at S/N=3. This method has been successfully applied to the detection of traces of p-aminophenol in paracetamol tablets.     

Integration of continuous-flow sampling with microchip electrophoresis using poly(dimethylsiloxane)-based valves in a reversibly sealed device

Here we describe a reversibly sealed microchip device that incorporates poly(dimethylsiloxane) (PDMS)-based valves for the rapid injection of analytes from a continuously flowing stream into a channel network for analysis with microchip electrophoresis. The microchip was reversibly sealed to a PDMS-coated glass substrate and microbore tubing was used for the introduction of gas and fluids to the microchip device. Two pneumatic valves were incorporated into the design and actuated on the order of hundreds of milliseconds, allowing analyte from a continuously flowing sampling stream to be injected into an electrophoresis separation channel. The device was characterized in terms of the valve actuation time and pushback voltage. It was also found that the addition of sodium dodecyl sulfate (SDS) to the buffer system greatly increased the reproducibility of the injection scheme and enabled the analysis of amino acids derivatized with naphthalene-2,3-dicarboxaldehyde/cyanide. Results from continuous injections of a 0.39 nL fluorescein plug into the optimized system showed that the injection process was reproducible (RSD of 0.7%, n = 10). Studies also showed that the device was capable of monitoring off-chip changes in concentration with a device lag time of 90 s. Finally, the ability of the device to rapidly monitor on-chip concentration changes was demonstrated by continually sampling from an analyte plug that was derivatized upstream from the electrophoresis/continuous flow interface. A reversibly sealed device of this type will be useful for the continuous monitoring and analysis of processes that occur either off-chip (such as microdialysis sampling) or on-chip from other integrated functions.     

In-channel indirect amperometric detection of heavy metal ions for electrophoresis on a poly(dimethylsiloxane) microchip

In-channel indirect amperometric detection mode for microchip capillary electrophoresis with positive separation electric field is successfully applied to some heavy metal ions. The influences of separation voltage, detection potential, the concentration and pH value of running buffer on the response of the detector have been investigated. An optimized condition of 1200 V separation voltage, −0.1 V detection potential, 20 mM (pH 4.46) running buffer of 2-(N-morpholino)ethanesulfonic acid (MES) + l-histidine (l-His) was selected. The results clearly showed that Pb²⁺, Cd²⁺, and Cu²⁺ were efficiently separated within 80 s in a 3.7 cm long native separation PDMS/PDMS channel and successfully detected at a single carbon fibre electrode. The theoretical plate numbers of Pb²⁺, Cd²⁺, and Cu²⁺ were 1.2 × 10⁵, 2.5 × 10⁵, and 1.9 × 10⁵ m⁻¹, respectively. The detection limits for Pb²⁺, Cd²⁺, and Cu²⁺ were 1.3, 3.3 and 7.4 μM (S/N = 3).     

On-line determination of trace sulfur dioxide in air by integrated microchip coupled with fluorescence detection

A microchip-based method was developed for on-line determination of trace sulfur dioxide (SO₂) in air. Gaseous SO₂, which diffused through the porous glass materials on the microchip, was absorbed into an absorption solution of triethanolamine (TEA) as sulfite ions and reacted with N-(9-acridinyl)maleimide (NAM), which was used as a fluorescent reagent. The fluorescence of NAM-sulfite in micro-fluidic channel was detected. The calibration curve of sulfite ions in the range of 1.5-30 μmol/L (SO₂ 3-60 ppbv) showed a linear relation R² = 0.995, and the relative standard deviation (R.S.D.) was 1.9% for 10 μmol/L sulfite ions in five measurements. The entire measurement procedure was achieved by the integrated microchip, and the consumption of reagents was drastically reduced. It was satisfactory to apply this method to determine on-line the SO₂ level in the air.     

环境空气监测气体分析仪在线校准装置研制

设计一种新型的膜渗透动态配气系统,将动态配气膜渗透技术、基体空气标准添加方法、大气采样技术相结合,研制环境空气监测气体分析仪在线校准装置.该装置实现了环境空气污染组分SO2、NO2、CO在线监测仪的连续、实时、基体添加校准,校准不确定度小于3％(k=2).设计的长寿命膜渗透动态配气系统制备的标准气体混合物,可以连续使用...     

A new fabrication process for a microchip electrophoresis device integrated with a three-electrode electrochemical detector

We report here a novel and simple process for the fabrication of a poly(methyl methacrylate) (PMMA)-based microchip electrophoresis device, integrated with a screen-printed three-electrode electrochemical detector that does not require a replicate mold. In this approach, a photoresist layer constitutes both an adhesion layer and side walls of 50 mum wide and 50 mum tall microfluidic channels on a screen-printed three-electrode PMMA substrate. Openings were drilled for buffer reservoirs on an additional piece of PMMA, then the final device was bonded in a PMMA/photoresist/PMMA sandwich configuration. This process is inexpensive, less time-consuming, and simpler compared with traditional fabrication methods. The combination of this PMMA-based microchip fabrication together with screen-printed electrode technology holds great promise for the mass production of a single-use micrototal analytical system. Successful determination of uric acid and L-ascorbic acid with the presented system validates its utility. In combination with a suitable electrochemical detector, this device holds much promise for the determination of other analytes in various biological samples for medical and clinical diagnosis.