Utilization of Supercritical Carbon Dioxide for the Preparation of 3-Hydroxyflavone and β-Cyclodextrin Complex

The solubility of 3-hydroxyflavone in water can be enhanced by forming complex with β-cyclodextrin (β-CD). In this study we introduced supercritical carbon dioxide as a substitute solvent to prepare 3-hydroxyflavone-β-cyclodextrin complex. The maximum drug loading determined by UV spectroscopy in complex was 14.7 wt.%, which was comparable to that of 1:1 complex (17.34 wt.% of 3-hydroxyflavone). The solubility of the drug loaded in the complex was better than that of pure drug in water. The enhanced solubility was attributed to the formation of the complex and the solubility of the β-cyclodextrin in water.     

A new sprout inhibitor of potato tuber based on carvone/β-cyclodextrin inclusion compound

A monoterpene, D-carvone or (4S)-(+)-carvone, present in the essential oil of caraway seeds (Carum carvi L.), acts as a sprouting inhibitor agent for potato tubers in storage. The aim of the present study was to investigate the possibility of using carvone/β-cyclodextrin inclusion compound as a sprout inhibitor agent for potato tubers. A Raman study of the interactions between β-cyclodextrin (β-CD) and included carvone molecule in solid state is also reported; the results confirm the synthesis of inclusion compound at pilot scale level.     

Self-assembly behavior of inclusion complex formed by β-cyclodextrin with α-aminopyridine

An inclusion complex (1) has been prepared by β-cyclodextrin with α-aminopyridine. The result of X-ray crystallographic analyses showed that the α-aminopyridine molecules in the β-cyclodextrin cavities possess two opposite orientations, i.e. the amine group of α-aminopyridine pointing to the primary side (1a, occupancy: 41.2%) or the secondary side (1b, occupancy: 58.8%) of β-cyclodextrin, forming two scalelike supramolecular aggregations. The studies of 2D NMR and circular dichroism spectra indicated that the α-aminopyridine molecule is deeply embedded in the β-cyclodextrin cavity to form host-guest inclusion complex, showing a circular dichroism spectrum induced by the chiral cavity of cyclodextrin. The results obtained are helpful for understanding the molecular recognition and aggregation mechanism between the host and guest.     

Kinetics of thermal degradation of poly(vinyl chloride)

Extensively studied thermal degradation of polyvinyl chloride (PVC) occurs with formation of free hydrogen chloride and conjugated double bonds absorbing light in visible region. Thermogravimetric monitoring of PVC blends degradation kinetics by the loss of HCl is often complicated by evaporation and degradation of plasticizers and additives. Spectroscopic PVC degradation kinetics monitoring by absorbance of forming conjugated polyenes is specific and should not be affected by plasticizers loss. The kinetics of isothermal degradation monitored by thermal gravimetric analysis in real time was compared with batch data obtained by UV/Visible absorption spectroscopy. Effects of plasticizer on kinetics of polyene formation were examined. Thermal degradation of PVC films plasticized with di-(2-ethylhexyl) phthalate (DEHP) and 1,2,4-benzenedicarboxylic acid, tri-(3-ethylhexyl) ester (TOTM) was monitored by conjugated double bonds light absorption at 350 nm at 160, 180, and 200 °C. Plasticizer-free PVC powder degradation kinetics and that of plasticized films were also obtained thermogravimetrically at temperatures ranging from 160 to 220 °C. Plasticizer-free PVC powder degradation and spectroscopically monitored degradation of plasticized PVC films occurred with the same apparent activation energy of ≈150 kJ mol⁻¹. No difference in degradation kinetics of films plasticized with DEHP and TOTM was detected.     

Structural characteristics of some soluble and insoluble β-cyclodextrin polymers

Several β-cyclodextrin polymers (βCDP) have been obtained by cross-linking β-cyclodextrin (βCD) with the reagent epichlorohydrin (EP). It is expected that these polymers are capable of retaining different organic molecules by adsorbing them on its network and also by forming inclusion complexes with βCDs. In this work, two soluble polymers containing 39% and 48% βCD and other insoluble ones with 65% and 74% βCD have been studied. The total amount of CD in the polymers could not be available for complexation. This parameter has been calculated by means of the decrease of colour intensity of phenolphthalein solutions when different amounts of βCDP were added. The insoluble polymer with 74% βCD appears to possess less CD available than that with 65% βCD, probably due to the higher cross-linking degree of the former. On the other hand, a higher availability of CD is found for the soluble polymer which contains 48% βCD. Moreover, the amount of glycerol monoether groups formed as a side effect during the cross-linking process has been determined and related to the epichlorohydrin content, structure and swelling properties of the polymers. It is concluded that, varying the synthesis conditions, it is possible to induce structural modifications in the hydrogel networks which can improve their practical applications.     

Binary Systems of Nifedipine And Various Cyclodextrins in The Solid State. Thermal,FTIR, XRD studies

Nifedipine complexes with β-cyclodextrin (β-CD), γ-cyclodextrin (γ-CD), 2-hydroxypropyl-β-cyclodextrin (2HP-β-CD), randomly methylated-β-cyclodextrin (RM-β-CD) and heptakis(2,6-O-dimethyl)-β-cyclodextrin (DM-β-CD) have been prepared by both kneading and heating methods and their behaviour studied by differential scanning calorimetry (DSC), diffuse reflectance mid-infrared spectroscopy (FTIR) and X-ray diffractometry (XRD). DSC revealed the nifedipine melting endotherm with onset at approximately 171°C for the kneaded mixtures with β-CD, γ-CD and 2HP-β-CD, thus confirming the presence of nifedipine in the crystalline state, while some decrease in crystallinity was observed in the DM-β-CD kneaded mixture. With RM-β-CD, however, broadening and shifting of the nifedipine endotherm and reduction in its intensity suggested that the kneading could have produced an amorphous inclusion complex. These differing extents of interaction of nifedipine with the cyclodextrins were confirmed by FTIR and XRD studies. This revised version was published online in August 2006 with corrections to the Cover Date.     

Interaction of Valdecoxib with β-cyclodextrin: Experimental and Molecular Modeling Studies

This study aimed to investigate the effect of β-cyclodextrin on aqueous solubility and dissolution rate of valdecoxib and also to get an insight of molecular interactions involved in formation of valdecoxib‐β-cyclodextrin inclusion complex. Phase solubility analysis indicated complex with possible stoichiometry of 1:1 and a stability constant of 234.01 M⁻¹. Thermodynamic studies in water indicated exothermic nature of inclusion complexation.␣Valdecoxib‐β-cyclodextrin complexes (1:1 M) were prepared by kneading method, solution method and␣freeze–drying method. The complex was characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (P-XRD), Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance␣(¹H-NMR) spectroscopy. Molecular modeling was used to help establish the mode of interaction of β-cyclodextrin with valdecoxib. ¹H-NMR analysis suggested that the unsubstituted phenyl ring of valdecoxib display favorable interaction with the hydrophobic cavity of β-cyclodextrin, which was confirmed by molecular dynamic simulations. An inclusion complex model has been established for explaining the observed enhancement of solubility of valdecoxib in water by β-cyclodextrin. Dissolution studies in water showed that the valdecoxib in freeze-dried complex dissolved much faster than the uncomplexed drug and physical mixture. This improvement in dissolution rate is attributed to the increased solubility and wettability due to encapsulation along with decreased crystallanity caused by complex formation, which is evident by DSC and P-XRD studies.     

A simple one-step electrosynthesis of poly(pyrrole-sulfated β-cyclodextrin) films

A functionalized stable film of poly(pyrrole-sulfated β-cyclodextrin) has been obtained electrochemically in LiClO₄ aqueous solution using a simple 1:1 mixture of pyrrole (Py) monomer and sulfated β-cyclodextrin (SβCD). Different cyclic voltammetric behavior is obtained for polypyrrole (PPy) and poly(Py-βSCD) during electrosynthesis. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) measurements on the two films have confirmed the presence of CD in the films and show that CD preferentially dopes the polymer even in the presence of a large excess of perchlorate supporting electrolyte. The morphology of the new polymers shows a more organized system under SEM examination. Contrary to conventional PPy films, this new polymer offers a wide potential range for electroanalytical exploration from selective electrodes to preconcentration/sampling devices. Electronic Publication     

Spectroelectrochemistry of conducting polypyrrole and poly(pyrrole–cyclodextrin) prepared in aqueous and nonaqueous solvents

Conducting polypyrrole (PPy) and poly(pyrrole-2,6-dimethyl-β-cyclodextrin) [poly(Py-β-DMCD)] films were prepared by electrode potential cycling on a gold electrode in aqueous and nonaqueous (acetonitrile) electrolyte solutions containing lithium perchlorate. The resulting products were characterized with cyclic voltammetry, in situ UV–Vis spectroscopy, and in situ conductivity measurements. For the electrosynthesis of poly(Py-β-DMCD), a (1:1) (mole–mole) (Py-β-DMCD) supramolecular cyclodextrin complex of pyrrole previously characterized with proton NMR spectroscopy was used as starting material. A different cyclic voltammetric behavior was observed for pyrrole and the poly(Py-β-DMCD) complex in aqueous and nonaqueous solutions during electrosynthesis. The results show that in both solutions in the presence of cyclodextrin, the oxidation potential of pyrrole monomers increases. However, the difference of oxidation potentials for films prepared in aqueous solution is larger than for the films prepared in nonaqueous solution. In situ conductivity measurements of the films show that films prepared in acetonitrile solution are more conductive than those synthesized in aqueous solutions. Maximum conductivity can be observed for PPy and poly(Py-β-DMCD) films prepared in nonaqueous solution in the range of 0.10 < E _Ag/AgCl < 0.90 V and 0.30 < E _Ag/AgCl < 0.90 V, respectively. In situ UV–Vis spectroelectrochemical data for both films prepared potentiodynamically by cycling the potentials from −0.40 < E _Ag/AgCl < 0.90 V in nonaqueous solutions are reported. This paper is dedicated to Prof. Alan Bond on the occasion of his 65th birthday in recognition of his numerous contributions toward electrochemistry.     

Solid state studies on molecular inclusions of <Emphasis Type="Italic">Lippia sidoides</Emphasis> essential oil obtained by spray drying

Inclusion complexes of Lippia sidoides essential oil and β-cyclodextrin were obtained by slurry method and its solid powdered form was prepared using spray drying. The influence of the spray drying, as well as the different essential oil:β-cyclodextrin ratio on the characteristics of the final product was investigated. With regard to the total oil retention 1:10 mass/mass ratio as optimal was found between the essential oil and β-cyclodextrin. Thermoanalytical techniques (TG, EGD, TG-MS) were used to support the formation of inclusion complex and to examine their physicochemical properties after accelerated storage conditions. It may be assumed that the thermal properties of the complexes were influenced not only by the different essential oil/ β-cyclodextrin ratio but also by the storage conditions. In the aspect of their thermal stabilities, complex prepared with 1:10 m/m ratio (essential oil:β-cyclodextrin) was the most stable one.     

The Effect of Cyclodextrins on the Luminol-Hydrogen Peroxide Chemiluminescence

The action of different molar ratios of α, β, γ-cyclodextrin upon the chemiluminescence of the luminol-H₂O₂ in alkaline buffer Tris-HCl, pH=8.5 has been evidenced. It was found out that α, β, γ- cyclodextrin have an antioxidant capacity, probably due to the free radicals (that are generate in the system) encapsulation in the their cavity. This behaviour depends on α, β, γ-cyclodextrin molar ratio; α-cyclodextrin and γ-cyclodextrin protects more efficiently against free radicals than β-cyclodextrin. These findings could be very important regarding the oxidative stress process.     

Photostability and solubility improvement of β-cyclodextrin-included tretinoin

In this work, we investigated the influence of β-cyclodextrin on the photostability of tretinoin and compared the photo-chemical stability of tretinoin, either in methanol or complexed with β-cyclodextrin, when exposed both to UV and fluorescent light. The physico-chemical characterization of tretinoin-β-cyclodextrin complexes, prepared by the freeze-drying process, using different tretinoin:β-cyclodextrin molar ratios (1:1 and 1:3), was carried out in solution by phase solubility studies, ¹H-NMR spectroscopy, and in solid state by infrared spectroscopy (FT-IR); these analyses confirmed the existence of an inclusion compound. Solubility study results showed that tretinoin solubility was enhanced by inclusion in β-cyclodextrin as a function of increasing concentrations of β-cyclodextrin in aqueous solution at different pH values (i.e., 3.0, 5.5, and 7.0). Moreover, the complexation of the tretinoin with β-cyclodextrin effectively protected the photolabile drug and reduced the degradation of tretinoin induced by UV and fluorescent light, improving its photo-chemical stability in comparison with free drug in methanol. Indeed, dissolved tretinoin in methanol degraded very quickly and completely, while β-cyclodextrin-included tretinoin decomposition was delayed and, after 30 days under UV exposure, the percentage of remaining drug was about 20–25% (depending on the tretinoin concentration). The photodegradation of tretinoin in methanol under fluorescent light was slower: after 5 days of irradiation it reached a photostationary state and intact tretinoin remained constant (6.6%). In conclusion, the β-cyclodextrin complexation always led to a reduction of degradation, depending on the tretinoin:β-cyclodextrin molar ratio and on the drug concentration (0.2 mg/ml or 0.4 mg/ml).     

Performance evaluation of new plasticizers for stretch PVC films

Six stretch PVC films have been formulated to have Shore A hardness of approx. 80 and nominal thickness of 15 μm with the aim of evaluating the performance of plasticizers from renewable and non-renewable sources for stretch PVC films intended to be employed as packaging. The reference film was produced with DEHA and ESBO, while the other films were produced with conventional plasticizers (ATBC and Polyadipate), new plasticizers from renewable sources (Mixture of glycerin acetates and Acetic acid esters of mono- and diglycerides of fatty acids) or a plasticizer employed in toy and childcare applications (DEHT) as a third plasticizer. The films were evaluated as to their physical and mechanical properties (durometer hardness, tensile strength and elongation), IR spectroscopy and light transmission. The several plasticizers influenced the mechanical properties of the PVC films to different degrees. All films will probably show adequate performance when used in packaging applications. Nevertheless, the vegetable oil-based plasticizers showed better mechanical performance than the other plasticizers when compared to DEHA.     

A Study of b-Cyclodextrin Inclusion Complexes with Progesterone and Hydrocortisone Using Rotating Frame Overhauser Spectroscopy

Summary.  Inclusion complexes of β-cyclodextrin with two steroid derivatives, progesterone (pregn-4-ene-3,20-dione) and hydrocortisone (11,17,21-trihydroxy-pregn-4-ene-3,20-dione), were studied in the liquid state by NMR spectroscopy. The complex formation process was monitored by intermolecular dipolar interactions between ¹H signals in the hydrophobic β-cyclodextrin cavity (H-3 and H-5 of the α-glucose units) and the steroid moiety in ROESY spectra. The data revealed that progesterone is fully immersed in the β-cyclodextrin cavity; however, complete inclusion of the hydrocortisone molecule was prevented by the polar hydroxyl groups on its surface. Received April 26, 2001. Accepted (revised) May 18, 2001     

Influence of Cyclodextrin Complexation on the in vitro Human Skin Penetration and Retention of the Sunscreen Agent, Oxybenzone

The objective of this study was to investigate the influence of cyclodextrins on the cutaneous availability of the sunscreen oxybenzone. The interaction between oxybenzone and hydrophilic α-, β- and γ-cyclodextrin derivatives was studied in water by phase-solubility analysis. Among the available cyclodextrins, hydroxypropyl-β-cyclodextrin (HP-β-CD) and especially sulfobutylether-β-cyclodextrin (SBE-β-CD) had the greatest solubilizing activity. Ethanol–water solutions containing oxybenzone free or complexed with HP-β-CD or SBE-β-CD were applied to human skin in Franz diffusion cells and the amount of sunscreen permeated into the different cutaneous compartments was determined by HPLC. As much as 20.5% of the oxybenzone applied dose diffused within the skin tissue after 6 h application. Between 39.4% and 54.9% of the penetrated UV filter was localized in the stratum corneum, with no significant difference between uncomplexed oxybenzone or its complex with HP-β-CD. Conversely, the amount retained in the stratum corneum was markedly decreased (ca. 50%) by complexation with SBE-β-CD. Considerable quantities of oxybenzone accumulated into the viable epidermis (5.7% of the applied dose) and dermis (6.2% of the applied dose) from the preparation containing the free UV filter. The sunscreen penetration to the deeper living layers of the skin was remarkably lower (1.0% and 2.0% of applied dose for epidermis and dermis, respectively) upon application of the sunscreen complexed with SBE-β-CD, whereas HP-β-CD had no effect. In addition, photostability experiments demonstrated that SBE-β-CD complexation did not alter the sunscreen photochemical properties.     

Solid-state characterization and dissolution properties of ezetimibe–cyclodextrins inclusion complexes

The objectives of this research were to prepare and characterize inclusion complex of Ezetimibe (EZE) with cyclodextrins (β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HPβ-CD)) and to study the effect of complexation on the dissolution rate of EZE, a water insoluble drug. Phase solubility curve was classified as A _P -type for both cyclodextrins, indicating the 2:1 stoichiometric ratio for β-CD–EZE and HPβ-CD – EZE inclusion complexes. The inclusion complexes in the molar ratio of 2:1 (β-CD–EZE and HPβ-CD–EZE) were prepared by various methods such as kneading, coevaporation and physical mixing. The molecular behaviors of drug in all samples were characterized by fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies. The results of these studies indicated that complex prepared by kneading and coevaporation methods showed inclusion of the EZE molecule into the cyclodextrins cavities. The highest improvement in in-vitro dissolution profiles was observed in complex prepared with hydroxypropyl-β-cyclodextrin using co-evaporation method. Mean dissolution time and similarity factor indicated significant difference between the release profiles of EZE from complexes and physical mixtures and from pure EZE.     

Application of combined thermoanalytical techniques in the investigation of cyclodextrin inclusion complexes

Citronellol and citronellyl acetate have been entrapped with α-, β- and γ-cyclodextrin (CD). Evolved gas detection and TG-MS coupling was applied to prove the actual inclusion complex formation between monoterpens and CDs. The terpene content was determined by UV-VIS specrophotometry and RP-HPLC and the effect of storage time on the terpene content was also investigated. The α- and γ-cyclodextrin inclusion complexes showed higher thermal stabilities vs. dynamic heating compared to the β-CD complexes. On the contray, the retention of guest using β-cyclodextrin even after 10 years of storage was much more pronounced. Experimental data other than 1:1 complex compositions are assumed. Molecular modeling experiments also suggested multiple complex compositions.     

Grafting of cyclodextrins onto filter paper

Grafting of cyclodextrins and cyclodextrins derivatives on cellulosic surface, such as paper or filter paper, provides hosting cavities that can include a large variety of chemicals for specific cellulose finishing. In this study grafting of monocholorotriazinyl-β-cyclodextrin (MCT-β-CD) and β-cyclodextrin (β-CD) to filter paper has been performed. β-cyclodextrin has been bonded to filter paper using 1,4-butanediol diglycidyl ether as the crosslinking agent. The untreated and treated filter papers were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), demonstrating the covalent binding of cyclodextrins to filter paper. The quantification of β-CD and MCT-β-CD grafted to filter paper was determined by the dye extinction method with the inclusion of phenolphthalein. The final β-CD content amounted to 15.9 μmol per gram of support (1.8% by weight), and 72.8 μmol per gram of support (11.3% by weight) for MCT-β-CD.     

Mebendazole complexes with various cyclodextrins: preparation and physicochemical characterization

Mebendazole is an antihelmintic drug, active against many intestinal parasites. Its systemic efficacy is limited by its poor water solubility. The use of natural or derivatized cyclodextrins permeated to multiply notably its apparent solubility, especially with permethyl β-cyclodextrine (PM β-CD) (multiplied by 4700). The inclusion complex formation between mebendazole and this methylated β-cyclodextrin, was characterized by mass spectrometry, powder X-ray diffractometry and Fourier transform infrared spectroscopy: mebendazole seemed to be included in permethyl β-cyclodextrin by its aromatic rings. To prepare inclusion complex of mebendazole and PMβ-CD by solvent evaporation, acetone may be used and the ratio using lower amount of cyclodextrin (MBZ:CD, 1:2) should be used.     

A host-guest optical sensor for aliphatic amines based on lipophilic cyclodextrin

A host-guest optical sensor for the determination of aliphatic amines as exemplified by octylamine is proposed. It is based on the reversible fluorescence enhancement of heptakis(2,6-di-O-isobutyl)-β-cyclodextrin(DOB-β-CD) hosting tetraphenylporphyrin (TPP) immobilized in poly(vinyl chloride) (PVC) membrane by aliphatic amine extracted from aqueous phase into membrane phase. The optimum membrane contained 1.15 wt % TPP, 6.15 wt % DOB-β-CD as sensing reagent and other membrane materials. The fluorescence enhancement of the membrane resulted from the formation of a stable three-component complex among DOB-β-CD, TPP, and aliphatic amines. With the optimum conditions described, the fluorescence response of the sensor to octylamine shows a good correlation with the theoretically derived equation in the range 1.0 × 10^–6 to 8.0 × 10^–4 mol/L. The response characteristics including reversibility, response time, reproducibility and lifetime and selectivity of this optical device are also discussed in detail. This sensor has also been applied for the determination of octylamine in water samples containing interferents with satisfactory recovery. Received: 21 November 1999 / Revised: 10 January 2000 / Accepted: 15 January 2000