Site-Specific Radioiodination of HER2-Targeting Affibody Molecules using 4-Iodophenethylmaleimide Decreases Renal Uptake of Radioactivity

Affibody molecules are small scaffold-based affinity proteins with promising properties as probes for radionuclide-based molecular imaging. However, a high reabsorption of radiolabeled Affibody molecules in kidneys is an issue. We have shown that the use of ¹²⁵I-3-iodo-((4-hydroxyphenyl)ethyl)maleimide (IHPEM) for site-specific labeling of cysteine-containing Affibody molecules provides high tumor uptake but low radioactivity retention in kidneys. We hypothesized that the use of 4-iodophenethylmaleimide (IPEM) would further reduce renal retention of radioactivity because of higher lipophilicity of radiometabolites. An anti-human epidermal growth factor receptor type 2 (HER2) Affibody molecule (Z_HER2:2395) was labeled using ¹²⁵I-IPEM with an overall yield of 45±3 %. ¹²⁵I-IPEM-Z_HER2:2395 bound specifically to HER2-expressing human ovarian carcinoma cells (SKOV-3 cell line). In NMRI mice, the renal uptake of ¹²⁵I-IPEM-Z_HER2:2395 (24±2 and 5.7±0.3 % IA g⁻¹at 1 and 4 h after injection, respectively) was significantly lower than uptake of ¹²⁵I-IHPEM-Z_HER2:2395 (50±8 and 12±2 % IA g⁻¹at 1 and 4 h after injection, respectively). In conclusion, the use of a more lipophilic linker for the radioiodination of Affibody molecules reduces renal radioactivity.     

On the structure of the LiH dimer and its negative ion

Ab initio calculations are presented on the structure of the lithium hydride dimer and its negative ion. The most interesting finding of this study is that the anion, resulting primarily from the binding of an electron in the large dipole field (≈ 14.8 debye) of linear LiHLiH, is stable with respect to the neutral dimer. Similar results are predicted for the alkali halide dimers [(MX)₂]. We suggest that the appearance potential for MX⁻ production via the dissociative attachment process, e⁻ + (MX)₂ → MX⁻ + M + X, may be due to the linear form of the dimers. In earlier work by Ebinghaus, it was assumed that the appearance potential for MX⁻ production from this reaction is due to the cyclic form of the dimers.     

Design and recognition of cucurbituril-secured platinum-bound oligopeptides

Platinum terpyridyl complexes, stacked on top of one another and secured as dimers with cucurbit[8]uril (CB[8]) in aqueous medium, were functionalized quantitatively and in situ with a pair of pentapeptides Phe-(Gly)₃-Cys by grafting their cysteine residues to the Pt centers. The resulting CB[8]·(Pt·peptide)₂ assemblies were used to target secondary hosts CB[7] and CB[8] via their pair of phenylalanine residues, again in situ. A series of well-defined architectures, including a supramolecular “pendant necklace” with hybrid head-to-head and head-to-tail arrangements inside CB[8], were obtained during the self-sorting process after combining only 3 or 4 simple building units.

A platinum terpyridyl complex, pentapeptide Phe-(Gly)₃-Cys and cucurbit[8]uril assemble into a “pendant necklace” with hybrid head-to-head and head-to-tail arrangements in aqueous medium.     

Thin films of metal dibenzotetraaza [14] annulene complexes.: Part 3. Dimerization and alternated dimerizations of γ-substituted Ni complexes

The electrochemical behaviour of some Ni γ-monosubstituted dibenzotetraaza [14] annulene complexes has been investigated. The oxidation in CH₂Cl₂ of the complex containing a 4-carboxybenzyl group leads to the corresponding γ-γ dimer whose electrochemical properties have been studied. The electrode surface can be coated by thin films of this dimer using CH₃CN instead of CH₂Cl₂; however, the resulting modified electrode is poorly stable. The oxidation of the complex containing 1-(4-carboxybenzyl)pyrrole as γ substituent involves γ-γ dimer formation before the formation of a regular polypyrrole film. The film displays reversible electrochemical reduction of the metal centre (Ni(II)/Ni(I)) and two successive oxidations of the macrocycle (Mc/Mc^•+ and Mc^•+/Mc²⁺). The complex containing a bromo(4-carboxybenzyl) group offers an unusual feature in that polymeric films can be obtained following an original procedure based on alternated dimerizations. This is a consequence of the formation of two different dimers obtained by anodic and cathodic processes.     

Association of model peptides and dehydropeptides: N-acetyl-l-alanine- and dehydroalanine N′,N′-dimethylamides

The comparative studies on the association of Ac-ΔAla-NMe₂ and Ac-l-Ala-NMe₂ in carbon tetrachloride were performed by the analysis of their average molecular weight, dipole moments and FTIR spectra. To aid spectroscopic interpretation and gain some deeper insight into the nature of associates, the geometries of the minimum energy of the dimers of Ac-ΔAla-NMe₂ and Ac-l-Ala-NMe₂ were calculated by the B3LYP/6-31+G** method. The average molecular weight in the studied concentration range, for the ΔAla and l-Ala peptide, as determined by the osmometric method, did not exceed 1.5 and 1.2 of the monomeric mass, respectively. Accordingly, the percentage of the monomeric form (α) decreased as concentration was increased more significantly for the ΔAla analogue than for its saturated counterpart. In the studied concentrations, the dipole moment of the unsaturated compound decreases and that of its counterpart is almost constant. We identified a wider range of dimeric forms of Ac-ΔAla-NMe₂ than those of Ac-l-Ala-NMe₂. While Ac-ΔAla-NMe₂ mainly forms cyclic dimers, built of open conformers H/F, specific for α,β-dehydroamino acids, Ac-l-Ala-NMe₂ forms cyclic and linear dimers, characteristic for the usual amino acids. Ac-ΔAla-NMe₂ has a greater tendency to associate than its saturated variant, which is the result of stronger hydrogen bonds.     

Thermal degradation behavior of polyamides having 2- and 4-hydroxycinnamic acid dimer components

Two new types of polyamides having anti head-to-tail hydroxycinnamic acid dimer component in the main chain were synthesized. Their thermal degradation behavior was investigated by TG-DSC analysis in comparison with those of their model compounds and the polyamides derived from anti head-to-head coumarin dimer. The key reactions in the thermal degradation were clarified to be lactonization and cyclic imide formation. The polyamide, derived from 4-hydroxycinnamic acid dimer and hexamethylenediamine, showed good heat stability. © 1993 John Wiley & Sons, Inc.     

Effect of ZrC Nanopowders on Enhancing the Hydro/Dehydrogenation Kinetics of MgH2 Powders

Hydrogen has been receiving great attention as an energy carrier for potential green energy applications. Hydrogen storage is one of the most crucial factors controlling the hydrogen economy and its future applications. Amongst the several options of hydrogen storage, light metal hydrides, particularly nanocrystalline magnesium hydride (MgH₂), possess attractive properties, making them desired hydrogen storage materials. The present study aimed to improve the hydrogen storage properties of MgH₂ upon doping with different concentrations of zirconium carbide (ZrC) nanopowders. Both MgH₂ and ZrC were prepared using reactive ball milling and high-energy ball milling techniques, respectively. The as-prepared MgH₂ powder was doped with ZrC (2, 5, and 7 wt%) and then high-energy-ball-milled for 25 h. During the ball milling process, ZrC powders acted as micro-milling media to reduce the MgH₂ particle size to a minimal value that could not be obtained without ZrC. The as-milled nanocomposite MgH₂/ZrC powders consisted of fine particles (~0.25 μm) with a nanosized grain structure of less than 7 nm. Besides, the ZrC agent led to the lowering of the decomposition temperature of MgH₂ to 287 °C and the reduction in its apparent activation energy of desorption to 69 kJ/mol. Moreover, the hydrogenation/dehydrogenation kinetics of the nanocomposite MgH₂/ZrC system revealed a significant improvement, as indicated by the low temperature and short time required to achieve successful uptake and release processes. This system possessed a high capability to tackle a long continuous cycle lifetime (1400 h) at low temperatures (225 °C) without showing serious degradation in its storage capacity.     

Cationic oligomerization of anethole: Selective synthesis of dimers and trimers

A linear unsaturated dimer of anethole [II, (E)-1,3-bis(p-methoxyphenyl)-2-methylpentene-1], was prepared in 98% yield with an acetyl perchlorate (AcClO₄) catalyst in a nonpolar solvent (C₆H₆) at a high temperature (70°C). At 0°C a linear unsaturated trimer was formed in high yield with dimer II. The geometric structure of the linear unsaturated dimers was determined by analysis of the nuclear Overhauser effect (NOE) on their ¹H-NMR spectra. NOE analysis showed that at 0°C with AcClO₄, trans-anethole gives the (E)-form (II), whereas cis-anethole yields the (Z)-form. On the other hand, with a metal-halide catalyst (BF₃OEt₂) a cyclic dimer and a cyclic trimer were produced in high yields in a polar solvent [(CH₂Cl₂)] at 70°C; higher oligomers (≥ tetramer) were scarcely formed. The effect of catalysts on the structure of oligomers was explained in terms of the interaction between a growing carbocation and a counterion.     

[89Zr]-Pertuzumab PET Imaging Reveals Paclitaxel Treatment Efficacy Is Positively Correlated with HER2 Expression in Human Breast Cancer Xenograft Mouse Models

Paclitaxel (PTX) treatment efficacy varies in breast cancer, yet the underlying mechanism for variable response remains unclear. This study evaluates whether human epidermal growth factor receptor 2 (HER2) expression level utilizing advanced molecular positron emission tomography (PET) imaging is correlated with PTX treatment efficacy in preclinical mouse models of HER2+ breast cancer. HER2 positive (BT474, MDA-MB-361), or HER2 negative (MDA-MB-231) breast cancer cells were subcutaneously injected into athymic nude mice and PTX (15 mg/kg) was administrated. In vivo HER2 expression was quantified through [⁸⁹Zr]-pertuzumab PET/CT imaging. PTX treatment response was quantified by [¹⁸F]-fluorodeoxyglucose ([¹⁸F]-FDG) PET/CT imaging. Spearman’s correlation, Kendall’s tau, Kolmogorov–Smirnov test, and ANOVA were used for statistical analysis. [⁸⁹Zr]-pertuzumab mean standard uptake values (SUV_mean) of BT474 tumors were 4.9 ± 1.5, MDA-MB-361 tumors were 1.4 ± 0.2, and MDA-MB-231 (HER2−) tumors were 1.1 ± 0.4. [¹⁸F]-FDG SUV_mean changes were negatively correlated with [⁸⁹Zr]-pertuzumab SUV_mean (r = −0.5887, p = 0.0030). The baseline [¹⁸F]-FDG SUV_mean was negatively correlated with initial [⁸⁹Zr]-pertuzumab SUV_mean (r = −0.6852, p = 0.0002). This study shows PTX treatment efficacy is positively correlated with HER2 expression level in human breast cancer mouse models. Molecular imaging provides a non-invasive approach to quantify biological interactions, which will help in identifying chemotherapy responders and potentially enhance clinical decision-making.     

Oligonucleotide Analogues with Integrated Bases and Backbone. Part 15

The self‐complementary (Z)‐configured U*[c_e]A⁽*⁾ dinucleotide analogues 6, 8, 10, 12, 14 , and 16 , and the A*[c_e]U⁽*⁾ dimers 19, 21, 23, 25, 27 , and 29 were prepared by partial hydrogenation of the corresponding ethynylene linked dimers. Photolysis of 14 led to the (E)‐alkene 17 . These dinucleotide analogues associate in CDCl₃ solution, as evidenced by NMR and CD spectroscopy. The thermodynamic parameters of the duplexation were determined by van't Hoff analysis. The (Z)‐configured U*[c_e]A⁽*⁾ dimers 14 and 16 form cyclic duplexes connected by Watson–Crick H‐bonds, the (E)‐configured U*[c_e]A dimer 17 forms linear duplexes, and the U*[c_e]A⁽*⁾ allyl alcohols 6, 8, 10 , and 12 form mixtures of linear and cyclic duplexes. The C(6/I)‐unsubstituted A*[c_e]U allyl alcohols 19 and 23 form linear duplexes, whereas the C(6/I)‐substituted A*[c_e]U* allyl alcohols 21 and 25 , and the C(5′/I)‐deoxy A*[c_e]U⁽*⁾ dimers 27 and 29 also form minor amounts of cyclic duplexes. The influence of intra‐ and intermolecular H‐bonding of the allyl alcohols and the influence of the base sequence upon the formation of cyclic duplexes are discussed.     

Trans-(−)-Kusunokinin: A Potential Anticancer Lignan Compound against HER2 in Breast Cancer Cell Lines?

Trans-(−)-kusunokinin, an anticancer compound, binds CSF1R with low affinity in breast cancer cells. Therefore, finding an additional possible target of trans-(−)-kusunokinin remains of importance for further development. Here, a computational study was completed followed by indirect proof of specific target proteins using small interfering RNA (siRNA). Ten proteins in breast cancer were selected for molecular docking and molecular dynamics simulation. A preferred active form in racemic trans-(±)-kusunokinin was trans-(−)-kusunokinin, which had stronger binding energy on HER2 trans-(+)-kusunokinin; however, it was weaker than the designed HER inhibitors (03Q and neratinib). Predictively, trans-(−)-kusunokinin bound HER2 similarly to a reversible HER2 inhibitor. We then verified the action of (±)-kusunokinin compared with neratinibon breast cancer cells (MCF-7). (±)-Kusunokinin exhibited less cytotoxicity on normal L-929 and MCF-7 than neratinib. (±)-Kusunokinin and neratinib had stronger inhibited cell proliferation than siRNA-HER2. Moreover, (±)-kusunokinin decreased Ras, ERK, CyclinB1, CyclinD and CDK1. Meanwhile, neratinib downregulated HER, MEK1, ERK, c-Myc, CyclinB1, CyclinD and CDK1. Knocking down HER2 downregulated only HER2. siRNA-HER2 combination with (±)-kusunokinin suppressed HER2, c-Myc, CyclinB1, CyclinD and CDK1. On the other hand, siRNA-HER2 combination with neratinib increased HER2, MEK1, ERK, c-Myc, CyclinB1, CyclinD and CDK1 to normal levels. We conclude that trans-(±)-kusunokinin may bind HER2 with low affinity and had a different action from neratinib.     

Development of Advanced Chemometric-Assisted Spectrophotometric Methods for the Determination of Cromolyn Sodium and Its Alkaline Degradation Products

Advanced and sensitive spectrophotometric and chemometric analytical methods were successfully established for the stability-indicating assay of cromolyn sodium (CS) and its alkaline degradation products (Deg1 and Deg2). Spectrophotometric mean centering ratio spectra method (MCR) and chemometric methods, including principal component regression (PCR) and partial least square (PLS-2) methods, were applied. Peak amplitudes after MCR at 367.8 nm, 373.8 nm and 310.6 nm were used within linear concentration ranges of 2–40 µg mL⁻¹, 5–40 µg mL⁻¹ and 10–100 µg mL⁻¹ for CS, Deg1 and Deg2, respectively. For PCR and PLS-2 models, a calibration set of eighteen mixtures and a validation set of seven mixtures were built for the simultaneous determination of CS, Deg1 and Deg2 in the ranges of 5–13 µg mL⁻¹, 8–16 µg mL⁻¹, and 10–30 µg mL⁻¹, respectively. The authors emphasize the importance of a stability-indicating strategy for the investigation of pharmaceutical products.     

The Influence of Nd and Sm on the Structure and Properties of Sol-Gel-Derived TiO2 Powders

TiO₂ nanopowders modified by Nd and Sm were prepared using the sol-gel technique. It was found by XRD analysis that the samples containing Sm are amorphous up to 300 °C, while those with Nd preserve a mixed organic-inorganic amorphous structure at higher temperatures (400 °C). The TiO₂ (rutile) was not detected up to 700 °C in the presence of both modified oxides. TiO₂ (anatase) crystals found at about 400 °C in the Sm-modified sample exhibited an average crystallite size of about 25–30 nm, while doping with Nd resulted in particles of a lower size—5–10 nm. It was established by DTA that organic decomposition is accompanied by significant weight loss occurring in the temperature range 240–350 °C. Photocatalytic tests showed that the samples heated at 500 °C possess photocatalytic activity under UV irradiation toward Malachite green organic dye. Selected compositions exhibited good antimicrobial activity against E. coli K12 and B. subtilis.     

Shelf-Life Stability of Ready-to-Use Green Rooibos Iced Tea Powder—Assessment of Physical,Chemical, and Sensory Properties

Green rooibos extract (GRE), shown to improve hyperglycemia and HDL/LDL blood cholesterol, has potential as a nutraceutical beverage ingredient. The main bioactive compound of the extract is aspalathin, a C-glucosyl dihydrochalcone. The study aimed to determine the effect of common iced tea ingredients (citric acid, ascorbic acid, and xylitol) on the stability of GRE, microencapsulated with inulin for production of a powdered beverage. The stability of the powder mixtures stored in semi-permeable (5 months) and impermeable (12 months) single-serve packaging at 30 °C and 40 °C/65% relative humidity was assessed. More pronounced clumping and darkening of the powders, in combination with higher first order reaction rate constants for dihydrochalcone degradation, indicated the negative effect of higher storage temperature and an increase in moisture content when stored in the semi-permeable packaging. These changes were further increased by the addition of crystalline ingredients, especially citric acid monohydrate. The sensory profile of the powders (reconstituted to beverage strength iced tea solutions) changed with storage from a predominant green-vegetal aroma to a fruity-sweet aroma, especially when stored at 40 °C/65% RH in the semi-permeable packaging. The change in the sensory profile of the powder mixtures could be attributed to a decrease in volatile compounds such as 2-hexenal, (Z)-2-heptenal, (E)-2-octenal, (E)-2-nonenal, (E,Z)-2,6-nonadienal and (E)-2-decenal associated with “green-like” aromas, rather than an increase in fruity and sweet aroma-impact compounds. Green rooibos extract powders would require storage at temperatures ≤ 30 °C and protection against moisture uptake to be chemically and physically shelf-stable and maintain their sensory profiles.     

Exchange interactions in oxovanadium phosphates: towards the understanding of the magnetic patterns

We report the calculations of exchange magnetic constants in a series of vanadium phosphorus oxides for which structural and magneto-chemical data are available. Four different types of dimers have been extracted from the crystal lattices in all solids studied. On the basis of a combined density functional theory broken symmetry approach, our calculations on molecular models allow us to define schemes of magnetic interactions. The largest absolute magnetic interaction is provided by the double O–P–O and di-μ-oxo bridges, suggestive of an alternating dimer chain model and an isolated dimer one for the VO(HPO₄)·0.5H₂O and α-VO(HPO₄)·2H₂O phases, respectively. Conversely, VO(HPO₄)·4H₂O is consistent with a bi-dimensional magnetic pattern whereas VO(H₂PO₄)₂ and α-VO(PO₃)₂ with three-dimensional magnetic schemes. The use of dimer models has been justified by the analysis of higher-nuclearity clusters.     

Halogen Interactions in Halogenated Oxindoles: Crystallographic and Computational Investigations of Intermolecular Interactions

X-ray structural determinations and computational studies were used to investigate halogen interactions in two halogenated oxindoles. Comparative analyses of the interaction energy and the interaction properties were carried out for Br···Br, C-H···Br, C-H···O and N-H···O interactions. Employing Møller–Plesset second-order perturbation theory (MP2) and density functional theory (DFT), the basis set superposition error (BSSE) corrected interaction energy (E_int(BSSE)) was determined using a supramolecular approach. The E_int(BSSE) results were compared with interaction energies obtained by Quantum Theory of Atoms in Molecules (QTAIM)-based methods. Reduced Density Gradient (RDG), QTAIM and Natural bond orbital (NBO) calculations provided insight into possible pathways for the intermolecular interactions examined. Comparative analysis employing the electron density at the bond critical points (BCP) and molecular electrostatic potential (MEP) showed that the interaction energies and the relative orientations of the monomers in the dimers may in part be understood in light of charge redistribution in these two compounds.     

Spectroscopic Studies on the Simple Rcooh System

The carbonyl stretching vibration of monocarboxylic acid in CCl₄ solution has been investigated. We introduce a new “m-factor” to study the polymerization of this simple RCOOH system. The value of “m-factor” was evaluated and tested in different concentrations and temperatures. Three classes of acid polymers were found as followings: linear dimer in class I (m?2); linear and cyclic dimers in class II (m?4); linear, cyclic dimers, and linear trimer in class III (m?8). A linear relationship between log K₁ and (??1)/(2?+1) was found.     

Photochemical Reactions. Part 64 [1]. The photochemistry of 3-alkyl-cyclopent-2-en-ones

On ultraviolet irradiation in toluene, cyclopent-2-en-one ( 1a ) and 3-methylcyclopent-2-en-one ( 1b ) undergo dimerisation (→ 3a, b, 4b ), whereas 3-t-butyl-cyclopent-2-en-one ( 1e ) and the bicyclo [3.2.1]octenone 2a only react with the solvent (→ 5e–7e, 8–10 ). The 3-ethyl-( 1c ) and 3-isopropyl-cyclopent-2-en-ones ( 1d ) afford by dimerisation products 3c, d, 4c and by reaction with the solvent 5c, d, 6c, d, 7d . The β-methoxy-enones 1f and 2b are unreactive under comparable irradiation conditions. The head-to-head cyclobutane dimer 3b (HH) by separate irradiation at < 3400 Å in toluene, is reconverted to 1b . By similar irradiation each of the head-to-tail dimers 3b (anti- and syn-HT) and also the unsaturated dimer 4b give a new isomer of unknown structure besides small amounts of monomer 1b and relatively large amounts of insoluble material. The photoreactions of 1b-e can be quenched by naphthalene. Stern-Volmer plots for the quenching of the dimers of 1b, 1c , and 1d , and of 3-t-butylcyclopentanone ( 5e ) and the dihydro dimer 7e are linear and within each experiment, the slopes satisfactorily coincide, whereas the slope for the α-benzyl ketone 6c is distinctly greater than that for the dimers 3c . A similar differentiation, although less pronounced, is found between the benzyl ketones 6d and 6e and the respective accompanying products.     

Hydrogen bonding: A molecular orbital treatment by the EHT and the CNDO/2 methods of methanol and of formic acid

By both the EHT and the CNDO/2 calculations, the linear dimer of methanol is found to be more stable than the cyclic dimer. The hydrogen bonds in the trimer are stronger than those in linear dimers. The proton potential function, charge densities, and overlap populations in the linear dimer of methanol have been obtained. The CNDO/2 calculations show that the cis-form of formic acid is more stable than the trans-form, in agreement with experimental data. The cyclic dimer of formic acid is more stable than the open dimer. The -form of formic acid trimer is more stable than the -form. The proton potential function and the charge densities in the cyclic dimer of formic acid have been obtained. The CNDO/2 method gives more realistic proton potential functions for the dimers of methanol and formic acid. The O ... O stretching force constant in the dimers of methanol and formic acid have been estimated to be 0.13 × 10⁵ dynes/cm and 0.27 × 10⁵ dynes/cm, respectively, in agreement with experimental data.     

Ionic Porous Aromatic Framework as a Self-Degraded Template for the Synthesis of a Magnetic γ-Fe2O3/WO3·0.5H2O Hybrid Nanostructure with Enhanced Photocatalytic Property

An ionic porous aromatic framework is developed as a self-degraded template to synthesize the magnetic heterostructure of γ-Fe₂O₃/WO₃·0.5H₂O. The Fe₃O₄ polyhedron was obtained with the two-phase method first and then reacted with sodium tungstate to form the γ-Fe₂O₃/WO₃·0.5H₂O hybrid nanostructure. Under the induction effect of the ionic porous network, the Fe₃O₄ phase transformed to the γ-Fe₂O₃ state and complexed with WO₃·0.5H₂O to form the n-n heterostructure with the n-type WO₃·0.5H₂O on the surface of n-type γ-Fe₂O₃. Based on a UV-Visible analysis, the magnetic photocatalyst was shown to have a suitable band gap for the catalytic degradation of organic pollutants. Under irradiation, the resulting γ-Fe₂O₃/WO₃·0.5H₂O sample exhibited a removal efficiency of 95% for RhB in 100 min. The charge transfer mechanism was also studied. After the degradation process, the dispersed powder can be easily separated from the suspension by applying an external magnetic field. The catalytic activity displayed no significant decrease after five recycles. The results present new insights for preparing a hybrid nanostructure photocatalyst and its potential application in harmful pollutant degradation.