Coumarin Based Fluorescent Probe for Colorimetric Detection of Fe<Superscript>3+</Superscript> and Fluorescence Turn On-Off Response of Zn<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A new coumarin based Schiff-base chemosensor-(E)-7-(((8-hydroxyquinolin-2-yl)methylene) amino)-4-methyl-2H-chromen-2-one (H ₁₁ L) was synthesized and evaluated as a colorimetric sensor for Fe³⁺ and fluorescence “turn on-off” response of Zn²⁺ and Cu²⁺ using absorption and fluorescence spectroscopy. Upon treatment with Fe³⁺ and Zn²⁺, the absorption intensity as well as the fluorescence emission intensity increases drastically compared to other common alkali, alkaline earth and transition metal ions, with a distinct color change which provide naked eye detection. Formation of 1:1 metal to ligand complex has been evaluated using Benesi-Hildebrand relation, Job’s plot analyses, ¹H NMR titration as well as ESI-Mass spectral analysis. The complex solution of H ₁₁ L with Zn²⁺ ion exhibited reversibility with EDTA and regenerate free ligand for further Zn²⁺ sensing. H ₁₁ L exhibits two INHIBIT logic gates with two different chemical inputs (i) Zn²⁺ (IN1) and Cu²⁺ (IN2) and (ii) Zn²⁺ (IN1) and EDTA (IN2) and the emission as output. Again, an IMPLICATION logic gate is obtained with Cu²⁺ and EDTA as chemical inputs and emission as output mode. Both free ligand as well as metal-complexes was optimized using density functional theory to interpret spectral properties. The corresponding energy difference between HOMO-LUMO energy gap for H ₁₁ L, H₁₁L-Zn²⁺ and H₁₁L-Cu²⁺ are 2.193, 1.834 and 0.172 eV, respectively.     

Bay Functionalized Perylenediimide with Pyridine Positional Isomers: NIR Absorption and Selective Colorimetric/Fluorescent Sensing of Fe<Superscript>3+</Superscript> and Al<Superscript>3+</Superscript> Ions

Bay functionalized perylene diimide substituted with pyridine isomers, (2-pyridine (2HMP-PDI), 3-pyridine (3-HMP-PDI) and 4-pyridine (4-HMP-PDI)) have been synthesized and explored for selective coloro/fluorimetric sensing of heavy transition metal ions. HMP-PDIs showed strong NIR absorption (760–765 nm) in DMF. The absorption and fluorescence of HMP-PDIs have been tuned by make use of pyridine isomers. Reddish-orange color was observed for 2-HMP-PDI (λ_max = 437, 551, 765 nm) whereas 4-HMP-PDI exhibited light green (λ_max = 432, 522, 765 nm). 3-HMP-PDI showed orange-yellow (λ_max = 431, 524, 762 nm). The fluorescence spectra of 2-, 3- and 4-HMP-PDI showed λ_max at 585, 538, 546 nm, respectively. Interestingly, HMP-PDI dyes showed selective color change (intense pink color) and fluorescence quenching for Fe³⁺ and Al³⁺ metal ions in DMF. Absorbance spectra revealed complete disappearance of NIR absorption and intensification/appearance of new peak at lower wavelength. The concentration dependent studies suggest that 4-HMP-PDI can detect up to 36.52 ppb of Fe³⁺ and 43.12 ppb of Al³⁺ colorimetrically. The interference studies in presence of other metal ions confirmed the good selectivity for Fe³⁺ and Al³⁺. The mechanistic studies indicate that Lewis acidic character of Fe³⁺ and Al³⁺ ions were responsible for selective color change and fluorescence quenching.     

Improvement of thermal and spectroscopic behavior of Er<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> co-doped tellurite glass for lasing materials

Tellurite glasses (TeO₂–ZnO–Nb₂O₅) mono-doped Er³⁺ and co-doped Er³⁺/Ce³⁺ have been prepared using the melt-quenching technique. To evaluate the effect of Ce³⁺ on the structural, thermal stability of glass hosts and fluorescence properties of Er³⁺, X-ray diffraction patterns, Ftir spectra, differential scanning calorimeter curves, absorption spectra, fluorescence emission spectra, fluorescence lifetimes, up-conversion emission spectra of glass samples were measured and investigated. Using Judd–Ofelt theory, we calculated intensity parameters (Ω₂, Ω₄ and Ω₆), spontaneous emission probabilities, the radiative lifetime, luminescence branching factors and the quantum yield of luminescence for ⁴I_13/2 → ⁴I_15/2 transition. The co-doping with Ce³⁺ was effective on the suppression of up-conversion emission of Er³⁺ owing to the phonon-assisted energy transfer: Er³⁺:⁴I_11/2 + Ce³⁺:²F_5/2 → Er³⁺:⁴I_13/2 + Ce³⁺:²F_7/2 which contributed the effective enhancement of 1.53 µm fluorescence emission. The change in optical properties with the addition of Ce³⁺ ions have been discussed and compared with other glasses. Using the Mc Cumber method for the ⁴I_13/2 → ⁴I_15/2 transition, absorption cross-section, calculated emission cross-section, and gain cross-section values support that TZNEr1Ce1 glass is a potential material for developing broad-band and high-gain erbium-doped fiber amplifiers applied for 1.53 µm.     

Photoluminescence Studies of Pr<Superscript>3+</Superscript> Doped Lead Germanate Glass

The Pr³⁺doped PbO-GeO₂ glass samples have been synthesized by melting and quenching process. The nephelauxetic ratio, covalency and bonding parameter which provides the information about the type of bonding between the rare earth ion and neighbor oxygen atoms calculated. The optical parameters such as radiative transition probabilities, radiative lifetime, branching ratios etc. of Pr³⁺ ions have been determined by Judd-Ofelt analysis. An upconversion emission using the excitation at ~594 nm supported by energy transfer process due to dipole-dipole interaction in the ¹D₂ metastable state has been found.     

A New Fluorescent Chemosensor Detecting Co<Superscript>2+</Superscript> and K<Superscript>+</Superscript> in DMF Buffered Solution

A new fluorescent chemosensor 2-(2-thiophene)imidazo [4,5,f]-1,10-phenanthroline (L) was prepared and characterized. By adding univalent or divalent metal ions such as Na⁺, K⁺, Mg²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Zn²⁺, Cd²⁺ and Hg²⁺ ions into the solution of L in DMF under buffered conditions with the working pH ranging from 7.0 to 8.0, we found that L could be used to detect K⁺ ratiometricly and it could also be applied to sense Co²⁺ with the phenomenon of fluorescence quenching of L. While the response behavior of L was not discernibly affected by other examined metal ions.     

A Novel Chemosensor Based on Rhodamine Derivative for Colorimetric and Fluorometric Detection of Cu<Superscript>2+</Superscript> in Aqueous Solution

A new rhodamine-based reversible chemosensor (2) was synthesized, which exhibits high sensitivity and selectivity for Cu²⁺ but no significant response toward other competitive metal ions in aqueous solution. Upon the addition of Cu²⁺, the spirolactam ring of 2 was opened and the solution color changed from colorless to red. Strangely, an unexpected fluorescence quenching was observed, which is contrary to the fluorescence turn-on of the most rhodamine-based chemosensors. The likely novel sensing mechanism has been proposed.     

Effect of Sr<Superscript>2+</Superscript> ion substitution with trivalent ions (Sc<Superscript>3+</Superscript>, In<Superscript>3+</Superscript>, La<Superscript>3+</Superscript>, Bi<Superscript>3+</Superscript>) on its ferroelectric instability in SrTiO<Subscript>3</Subscript>

The vibration frequencies of unstable ferroelectric and antiferrodistortion modes and the dependences of the energy on the ion displacement amplitude have been calculated within the generalized Gordon-Kim model for distortions along eigenvectors of these modes in the mixed compounds Sr_{1 − x} A _x Ti_{1 − x} /₄□ _x/4O₃ and Sr_{1 − y} A _2y /₃□ _y/3TiO₃ (A = Sc³⁺, In³⁺, La³⁺, Bi³⁺; □ is the vacancy). To compensate an excess positive charge, vacancies are introduced into the Ti⁴⁺ or Sr²⁺ site. Calculations have been performed in the “daverage” crystal approximation for impurity concentrations of 0.25 and 0.50. To this end, a set of 40 atomic superlattices with various orderings of heterovalent ions Sr²⁺ and impurity A ³⁺ has been considered. It has been found that each impurity type, independently of charge balance, induces ferroelectric instabilities in doped compounds. In the case of doping with In³⁺ and La³⁺ for concentration x = 0.25, the possibility of rotating the polarization vector has been shown.     

A Dual-Target Fluorescent Probe with Response-Time Dependent Selectivity for Cd<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A novel fluorescent probe (NT) was developed by merging 2-hydrazinylbenzothiazole with 2-hydroxy-1-naphthaldehyde for the detection of Cd²⁺ and Cu²⁺. The probe alone is almost nonfluorescent due to the isomerization of C=N in the excited state. The addition of Cd²⁺ can cause an immediate strong green fluorescence owing to the suppression of C=N isomerization by Cd²⁺-coordination. Furthermore, NT gives a delayed turn-on fluorescence response to Cu²⁺ although it is a vigorous fluorescence quencher, which was thanks to the inhibition of the electron transfer between excited fluorophore and paramagnetic Cu²⁺ by sulfur donor. Based on fluorescence spectra and ESI-MS analysis, the binding modes between NT and Cd²⁺/Cu²⁺ were proposed.     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.     

Photon avalanche upconversion and pump power studies in LaF<Subscript>3</Subscript>:Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> phosphor

Hexagonal LaF₃:Er³⁺/Yb³⁺ phosphor material has been synthesized by chemical precipitation method to obtain high near-infrared to green upconversion (UC) efficiency. Its thermal, structural and fluorescence properties have been studied. UC emission bands have been observed up to 315 nm in UV region. The effect of input pump power on the intensities of various emission bands has been studied in detail and photon avalanche UC mechanism has been identified. On increasing the excitation power, some bands have shown saturation in intensity. Also, at higher pump intensities two new UC bands were observed and their origin has been discussed. The phosphor has also been tested for possible UC-based fingerprint detection.     

H<Superscript>+</Superscript> and He<Superscript>2+</Superscript> impact charge transfer cross sections of magnesium

H⁺ impact single and He²⁺ impact single and double electron capture cross sections of magnesium atoms have been calculated in the modified binary encounter approximation (BEA). The accurate expressions of ion impact s_DE\sigma _{\Delta {E}} (cross section for energy transfer DE\Delta E) and Hartree-Fock momentum distributions of the target electrons have been used throughout the calculations. On the basis of the present work it is concluded that inner shell captures by H⁺ and He²⁺ ions incident on magnesium atoms contribute partly to single electron capture and partly to transfer ionization cross sections. The calculated He²⁺ impact double electron capture cross sections of magnesium are in reasonably good agreement with the experimental observations. This indicates the success of the present theoretical approach in study of charge transfer cross sections of atoms as indirect mechanisms do not interfere with double electron capture processes in this case.     

PL Properties of Sr<Subscript>2</Subscript>CeO<Subscript>4</Subscript> With Eu<Superscript>3+</Superscript> and Dy<Superscript>3+</Superscript> for Solid State Lighting Prepared by Precipitation Method

Photoluminescence studies of pure and Dy³⁺, Eu³⁺ doped Sr₂CeO₄ compounds are presented by oxalate precipitation method for solid state lighting. The prepared samples also characterized by XRD, SEM (EDS) and FTIR spectroscopy. The pure Sr₂CeO₄ compound displays a broad band in its emission spectrum when excited with 280 nm wavelength, which peaks centered at 488 nm, which is due to the energy transfer between the molecular orbital of the ligand and charge transfer state of the Ce⁴⁺ ions. Emission spectra of Sr₂CeO₄ with different concentration of Dy³⁺ ions under near UV radiation excitation, shows that intensity of luminescence spectra is found to be affected by Dy³⁺ ions, and it increases with adding some percentages of Dy³⁺ ions. The maximum doping concentration for quenching is found to be Dy³⁺?=?0.2 mol % to Sr²⁺ions. The observed broad spectrum from 400 to 560 nm is mainly due to CT transitions in Sr₂CeO₄ matrix and some fractional contribution of transitions between ⁴F_9/2 → ⁶H_15/2 of Dy³⁺ ions. Secondly the effect of Eu³⁺ doping at the Sr²⁺ site in Sr₂CeO₄, have been studied. The results obtained by doping Eu³⁺ concentrations (0.2 mol% to 1.5 mol%), the observed excitation and emission spectra reveal excellent energy transfer between Ce⁴⁺ and Eu³⁺. The phenomena of concentration quenching are explained on the basis of electron phonon coupling and multipolar interaction. This energy transfer generates white light with a color tuning from blue to red, the tuning being dependent on the Eu³⁺ concentration. The results establish that the compound Sr₂CeO₄ with Eu³⁺?=?1 mol% is an efficient “single host lattice” for the generation of white lights under near UV-LED and blue LED irradiation. The commission internationale de I’Eclairage (CIE) coordinates were calculated by Spectrophotometric method using the spectral energy distribution of prepared phosphors.     

Studies on Interaction of Norfloxacin,Cu<Superscript>2+</Superscript>, and DNA by Spectral Methods

The interactions of norfloxacin (NFA), DNA, and Cu²⁺ are studied by fluorescence and UV-spectra method. According to the experimental results, it can be concluded that NFA can form a steady binary complex with Cu²⁺. There is a linear relationship between the Fluorescence intensity of the norfloxacin–Cu²⁺–DNA system and the concentration of DNA. And when the concentration of the NFA is 1.95×10⁻⁵ mol L⁻¹, they possess a good linearity in the concentration of DNA ranged from 4.7×10⁻⁶ to 2.8×10⁻⁵ mol L⁻¹.It is a good method due to the high sensitivity and selectivity.     

Paramagnetic resonance of Mn<Superscript>4+</Superscript> and Mn<Superscript>2+</Superscript> centers in lanthanum gallate single crystals

An increase in the manganese concentration in lanthanum gallate in the range 0.5–5.0% has been found to result in a complete replacement of individual Mn⁴⁺ ions by Mn²⁺ ions. The relative concentrations and binding energies of individual Mn⁴⁺, Mn³⁺, and Mn²⁺ ions have been determined. The spin Hamiltonians of the Mn²⁺ and Mn⁴⁺ centers in the rhombohedral and orthorhombic phases, respectively, have been constructed and the orientation of the principal axes of the fine-structure tensor of Mn⁴⁺ at room temperature has been found. The possibility of using electron paramagnetic resonance for determining the rotation angles of oxygen octahedra of lanthanum gallate with respect to the perovskite structure has been discussed.     

Recognition of H<Subscript>2</Subscript>PO<Stack><Subscript>4</Subscript><Superscript>-</Superscript></Stack> and Cu<Superscript>2+</Superscript> in Water by Luminescent Terbium Silica Xerogel

Terbium silica hybrid material with imidazole ring that can be emissive in water has been designed and showed host-guest interactions with specific ions (cations and anions). In detail, we studied the sensing abilities of this material by addition of the anions H₂PO₄^-, HSO₄^-, F^-, Cl^-, Br^- and I^- to water suspension of the derived powders. Only dihydrogen phosphate resulted in the quenching of the lanthanide luminescence (detection limit 10^-5 M). The same way was found in Cu²⁺ ions which also gave rise to luminescence quenching (detection limit 10^-5 M). More interestingly, luminescent sol-gel films were successfully prepared by the same materials and exhibited emission responses to H₂PO₄^- and Cu²⁺. For the sake of improving its mechanical property, the robust and flexible inorganic/PMMA hybrid material with sensing capability was also developed for future use.     

Three-body muon-transfer collisions from hydrogen isotope to He<Superscript>2+</Superscript> and Li<Superscript>3+</Superscript> ions

The muon transfer rates from hydrogen isotopes (p,d) to ^3,4He²⁺ and ^6,7Li³⁺ ions are calculated in the hyperspherical close coupling method. Well converged results are obtained. The present rates are comparable to those of existing calculations for He²⁺, but they are much larger for Li³⁺. The resonance parameters are also calculated for resonances near the (Hμ)_1s threshold.     

Thermal quenching of luminescence of BaY<Subscript>2</Subscript>F<Subscript>8</Subscript> crystals activated with Er<Superscript>3+</Superscript> and Tm<Superscript>3+</Superscript> ions

Thermal quenching of interconfigurational 5d-4f luminescence of Er³⁺ and Tm³⁺ ions in BaY₂F₈ crystals is studied in the temperature range of 330–790 K. The quenching temperatures are ~575 and ~550 K for Er³⁺ and Tm³⁺, respectively. It is shown that quenching of 5d-4f luminescence of Tm³⁺ ions is caused by thermally stimulated ionization of 5d electrons to the conduction band.     

Study of Specific Interaction between bis(<Emphasis Type="Italic">p</Emphasis>-phenylene)-34-crown-10-based Substituted Macrocycle and Ni<Superscript>2+</Superscript>

A novel macrocyclic host has been synthesized for the determination of Ni (II) ions in aqueous solution (H₂O-CH₃CN, v/v?=?1:1). Its molecular structure has been verified by ¹H-NMR, ¹³C NMR and mass spectrometry (ESI).This probe shows selectivity towards the presence of Ni (II) ion among various alkali, alkaline earth, and transition metal ions. The formation of a new fluorescence band at 311 nm has been detected due to possible complex formation with increasing Ni²⁺ concentration in the range of 10^?5–10^?4 M. The detection limit is calculated to be 5.22 μM. To our knowledge, it will be the first case for bis(p-phenylene)-34-crown-10 based molecules to recognize Ni²⁺ ions.     

Soft-core Interaction for the <Superscript>4,6</Superscript>He + <Superscript>64</Superscript>Zn Fusion Reactions

In this paper, the cross section of the ⁴He + ⁶⁴Zn and ⁶He + ⁶⁴Zn reactions, at bombarding energies above and below the fusion barrier, has been investigated. Soft-core nucleon-nucleon interaction and the Monte Carlo method have been employed for studying the nuclear potential of the projectile-target system. One adjustable parameter has been chosen in this study. This parameter can change the depth of the soft-core potential. It has to be adjusted so that the calculated elastic scattering and fusion cross sections are in acceptable agreement with experimental data. Our results indicate that an increase in energy decreases the depth parameter of the soft-core nucleon-nucleon potential obtained from careful analysis the ⁴He + ⁶⁴Zn and ⁶He + ⁶⁴Zn reactions. Likewise, by comparing the results obtained from both reactions, one can observe that the calculated depth parameter for the reaction related to ⁶He is larger than that for ⁴He at the same energy, in particular at the sub-barrier energies. We try to explain this behavior.     

Local structure of Gd<Superscript>3+</Superscript> and Eu<Superscript>2+</Superscript> impurity centers in a CdF<Subscript>2</Subscript> crystal

The local crystal structure of Gd³⁺ and Eu²⁺ cubic impurity centers in cadmium fluoride is calculated within the shell model in the pair potential approximation. The local compressibility of the cationic and anionic sublattices of the host lattice is determined in the vicinity of the Gd³⁺ (Eu²⁺) impurity ion.