Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Structure and detonation performance of a novel HMX/LLM‐105 cocrystal explosive

Intermolecular interactions and properties of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐ tetrazocine (HMX) / 2,6‐diamino‐3,5‐dinitropyrazine‐1‐oxide (LLM‐105) cocrystal were studied by using the dispersion‐corrected density functionals (ωB97XD, B97D) and meta‐hybrid functional (M062x) methods. Binding energies, heats of formation, thermodynamic properties, atoms in molecules, and natural bond orbital analysis were performed to investigate HMX/LLM‐105 complexes. Results show that the main intermolecular interactions between HMX and LLM‐105 are CH…O, NH…O, N…O, and O…O interactions. In addition, Monte Carlo simulation was employed to predict the crystal structure of HMX/LLM‐105 cocrystal. The HMX/LLM‐105 cocrystal is most likely to crystallize in C2/c space group, and its corresponding cell parameters are Z = 8, a = 41.63 Å, b = 6.77 Å, c = 45.63 Å, ß = 164.55°, and ρ = 1.99 g/cm³. Detonation velocity and pressure of HMX/LLM‐105 cocrystal are 8.95 km/s, 37.69GPa, a little lower than those of HMX (9.10 km/s, 37.76GPa). However, according to the net charges of nitro group, HMX/LLM‐105 cocrystal exhibits less sensitive than HMX. Finally, bond dissociation energy calculation shows that HMX/LLM‐105 complexes are thermally stable. Considering thermal stability, sensitivity, and detonation performance, HMX/LLM‐105 cocrystal meets the requirements of insensitive high energy density materials. Copyright © 2013 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetics of the gas‐phase homogeneous unimolecular elimination of selected ethyl esters of 2‐oxo‐carboxylic acids

The gas‐phase elimination kinetics of selected ethyl esters of 2‐oxo‐carboxylic acid have been studied over the temperature range of 270–415 °C and pressures of 37–114 Torr. The reactions are homogeneous, unimolecular, and follow a first‐order rate law in a seasoned static reaction vessel, with an added free radical suppressor toluene. The observed overall and partial rate coefficients are expressed by the following Arrhenius equations:

• Ethyl oxalyl chloride
• log k_overall (s^?1) = (13.22 ± 0.45) ? (179.4 ± 4.9) kJ mol^?1 (2.303 RT)^?1
• Ethyl piperidineglyoxylate
• log k_(CO2) (s^?1) = (12.00 ± 0.30) ? (191.2 ± 3.9) kJ mol^?1 (2.303 RT)^?1
• log k_(CO) (s^?1) = (12.60 ± 0.09) ? (210.7 ± 1.2) kJ mol^?1 (2.303 RT)^?1
• log k_t(overall) (s^?1) = (12.22 ± 0.26) ? (193.4 ± 3.4) kJ mol^?1 (2.303 RT)^?1
• Ethyl benzoyl formate
• log k_(CO2) (s^?1) = (12.89 ± 0.72) ? (203.8 ± 9.0) kJ mol^?1 (2.303 RT)^?1
• log k_(CO) (s^?1) = (13.39 ± 0.31) ? (213.3 ± 3.9) kJ mol^?1 (2.303 RT)^?1
• log k_t(overall) (s^?1) = (13.24 ± 0.60) ? (205.8 ± 7.6) kJ mol^?1 (2.303 RT)^?1

The kinetic and thermodynamic parameters of these reactions, together with those reported in the literature, lead to consider three different mechanistic pathways of elimination. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical studies on the structure,sensitivity, density,thermodynamic properties and detonation performance of dinitrobitriazoles

Azodinitro- and dinitroethylene-bridged bitriazoles are of interest in the contest of high explosives, and were found to have true local energy minima at the B3LYP/aug-cc-pVDZ level of theory. The optimised structures, vibrational frequencies and thermodynamic quantities for bitriazoles were obtained in the ground state. Kamlet–Jacobs equations were used to evaluate the performance of bitriazoles based on the predicted density and the calculated heat of explosion. Detonation properties (D = 8.12 to 9.23 km s^?1 and P = 28.0 to 39.83 GPa) of bitriazoles were found to be promising compared with those of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX, D = 8.75 km s^?1 and P = 34.7 GPa) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX, D = 8.96 km s^?1 and P = 35.96 GPa). The fusion of azoles particularly appears to be a promising area for investigation, since it may lead to the desirable consequences of higher heat of explosion, higher density and thus improved detonation performance.     

Pulse radiolysis studies of 2‐ and 3‐hydroxybenzyl alcohols: inhibition of dehydration of ·OH‐(hydroxybenzyl alcohols) adducts by H2PO4− ions

Reactions of ·OH/O ^.? radicals and H‐atoms as well as specific oxidants such as Cl₂^.? and N₃· radicals have been studied with 2‐ and 3‐hydroxybenzyl alcohols (2‐ and 3‐HBA) at various pH using pulse radiolysis technique. At pH 6.8, ·OH radicals were found to react quite fast with both the HBAs (k = 7.8 × 10⁹ dm³ mol^?1 s^?1 with 2‐HBA and 2 × 10⁹ dm³ mol^?1 s^?1 with 3‐HBA) mainly by adduct formation and to a minor extent by H‐abstraction from ? CH₂OH groups. ·OH‐(HBA) adduct were found to undergo decay to give phenoxyl type radicals in a pH dependent way and it was also very much dependent on buffer‐ion concentrations. It was seen that ·OH‐(2‐HBA) and ·OH‐(3‐HBA) adducts react with HPO₄^2? ions (k = 2.1 × 10⁷ and 2.8 × 10⁷ dm³ mol^?1 s^?1 at pH 6.8, respectively) giving the phenoxyl type radicals of HBAs. At the same time, this reaction is very much hindered in the presence of H₂PO ions indicating the role of phosphate ion concentration in determining the reaction pathway of ·OH adduct decay to final stable product. In the acidic region adducts were found to react with H⁺ ions. At pH 1, reaction of ·OH radicals with HBAs gave exclusively phenoxyl type radicals. Proportion of the reducing radicals formed by H‐abstraction pathway in ·OH/O ^.? reactions with HBAs was determined following electron transfer to methyl viologen. H‐atom abstraction is the major pathway in O ^.? reaction with HBAs compared to ·OH radical reaction. H‐atom reaction with 2‐ and 3‐HBA gave transient species which were found to transfer electron to methyl viologen quantitatively. Copyright © 2010 John Wiley & Sons, Ltd.     

Computational study on structures,thermochemical properties,and bond energies of disulfide oxygen (S–S–O)‐bridged CH3SSOH and CH3SS(=O)H and radicals

Cleavage of disulfide bonds is a common method used in linking peptides to proteins in biochemical reactions. The structures, internal rotor potentials, bond energies, and thermochemical properties (Δ_fH°, S°, and Cp(T)) of the S–S bridge molecules CH₃SSOH and CH₃SS(=O)H and the radicals CH₃SS?=O and C?H₂SSOH that correspond to H‐atom loss are determined by computational chemistry. Structure and thermochemical parameters (S° and Cp(T)) are determined using density functional Becke, three‐parameter, Lee–Yang–Parr (B3LYP)/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p). The enthalpies of formation for stable species are calculated using the total energies at B3LYP/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p), and the higher level composite CBS–QB3 levels with work reactions that are close to isodesmic in most cases. The enthalpies of formation for CH₃SSOH, CH₃SS(=O)H are ?38.3 and ?16.6 kcal mol^?1, respectively, where the difference is in enthalpy RSO–H versus RS(=O)–H bonding. The C–H bond energy of CH₃SSOH is 99.2 kcal mol^?1, and the O–H bond energy is weaker at 76.9 kcal mol^?1. Cleavage of the weak O–H bond in CH₃SSOH results in an electron rearrangement upon loss of the CH₃SSO–H hydrogen atom; the radical rearranges to form the more stable CH₃SS· = O radical structure. Cleavage of the C–H bond in CH₃SS(=O)H results in an unstable [CH₂SS(=O)H]* intermediate, which decomposes exothermically to lower energy CH₂ = S + HSO. The CH₃SS(=O)–H bond energy is quite weak at 54.8 kcal mol^?1 with the H–C bond estimated at between 91 and 98 kcal mol^?1. Disulfide bond energies for CH₃S–SOH and CH3S–S(=O)H are low: 67.1 and 39.2 kcal mol^?1. Copyright © 2011 John Wiley & Sons, Ltd.     

Strategy of improving the stability and detonation performance for energetic material by introducing the boron atoms

A novel stable energetic compound (E)‐1,2‐diamino‐1,2‐dinitrodiboron (DANB) was theoretically designed based on the structure of 1,1‐diamino‐2,2‐dinitroethene (FOX‐7). Atomization method in combination with Hess' law was used to predict the heat of formation. The detonation velocity (D) and detonation pressure (P) of DANB were approximatively estimated by using Kamlet–Jacobs equations. As a result, DANB has huge heat of formation (2013.5 kJ/mol) and specific enthalpy of combustion (?26.4 kJ/g). Furthermore, DANB possesses high crystal density (1.85 g/cm³) and heat of detonation (5476.0 cal/g), which lead to surprising detonation performance (D = 10.72 km/s, P = 51.9 GPa) that is greater than those of FOX‐7 (D = 8.63 km/s, P = 34.0 GPa) and CL‐20 (D = 9.62 km/s, P = 44.1 GPa). More importantly, DANB is very stable because its bond dissociation energy of the weakest bond (BDE = 357.8 kJ/mol) is larger than those of the most common explosives, such as FOX‐7 (BDE = 200.4 kJ/mol), CL‐20(BDE = 209.2 kJ/mol), HMX(BDE = 165.7 kJ/mol), and RDX (BDE = 161.4 kJ/mol). Therefore, our results show that DANB is a promising candidate for stable and powerful energetic material.     

The mechanism of the homogeneous,unimolecular gas‐phase elimination kinetic of 1,1‐dimethoxycyclohexane: experimental and theoretical studies

The gas‐phase elimination of 1,1‐dimethoxycyclohexane yielded 1‐methoxy‐1‐cyclohexene and methanol. The kinetics were determined in a static system, with the vessels deactivated with allyl bromide, and in the presence of the free radical inhibitor cyclohexene. The working temperature was 310–360 °C and the pressure was 25–85 Torr. The reaction was found to be homogeneous, unimolecular, and follows a first‐order rate law. The temperature dependence of the rate coefficients is given by the following Arrhenius equation: log k(s^?1) = [(13.82 ± 0.07) – (193.9 ± 1.0)(kJ mol^?1)](2.303RT)^?1; r = 0.9995. Theoretical calculations were carried out using density functional theory (DFT) functionals B3LYP, MPW1PW91, and PBE with the basis set 6‐31G(d,p) and 6‐31G++(d,p). The calculated values for the energy of activation and enthalpy of activation are in reasonably good agreement with the experimental values using the PBE/6‐31G (d,p) level of theory. Both experimental results and theoretical calculations suggest a molecular mechanism involving a concerted polar four‐membered cyclic transition state. The transition state structure of methanol elimination from 1,1‐dimethoxycyclohexane is characterized by a significantly elongated C? O bond, while the C_β? H bond is stretched to a smaller extent, as compared to the reactant. The process can be described as moderately asynchronic with some charge separation in the TS. Copyright © 2010 John Wiley & Sons, Ltd.     

Conformational analysis of 3‐methyl‐3‐silathiane and 3‐fluoro‐3‐methyl‐3‐silathiane

The conformational equilibria of 3‐methyl‐3‐silathiane 5 , 3‐fluoro‐3‐methyl‐3‐silathiane 6 and 1‐fluoro‐1‐methyl‐1‐silacyclohexane 7 have been studied using low temperature ¹³C NMR spectroscopy and theoretical calculations. The conformer ratio at 103 K was measured to be about 5 _ax: 5 _eq = 15:85, 6 _ax: 6 _eq = 50:50 and 7 _ax: 7 _eq = 25:75. The equatorial preference of the methyl group in 5 (0.35 kcal mol^?1) is much less than in 3‐methylthiane 9 (1.40 kcal mol^?1) but somewhat greater than in 1‐methyl‐1‐silacyclohexane 1 (0.23 kcal mol^?1). Compounds 5–7 have low barriers to ring inversion: 5.65 (ax → eq) and 6.0 (eq → ax) kcal mol^?1 ( 5 ), 4.6 ( 6 ), 5.1 (Me_ax → Me_eq) and 5.4 (Me_eq → Me_ax) kcal mol^?1 ( 7 ). Steric effects cannot explain the observed conformational preferences, like equal population of the two conformers of 6 , or different conformer ratio for 5 and 7 . Actually, by employing the NBO analysis, in particular, considering the second order perturbation energies, vicinal stereoelectronic interactions between the Si–X and adjacent C–H, C–S, and C–C bonds proved responsible. Copyright © 2010 John Wiley & Sons, Ltd.     

Kinetics and mechanism of gas‐phase pyrolysis of ylides. Part 3.1 Thermal reactivity of α‐carbonyl‐ and thiocarbonyl‐stabilized methylenetriphenylphosphoranes

Fourteen ketone/thione‐stabilized triphenylphosphonium methylides were subjected to conventional gas‐phase and flash vacuum pyrolysis (FVP). The kinetics of the first‐order thermal gas‐phase reactions of all these compounds were investigated over 360–653 K temperature range. The values of the Arrhenius log A and energy of activation of these ylides averaged 11.52 ± 0.34 s^?1 and 133.20 ± 3.14 kJ mol^?1, respectively. The products of sealed‐tube (static) and FVP were analyzed and compared. A mechanism is proposed to account for the products of reaction. The rate constants [k (s^?1)] of the substrates at 500 K were calculated and used to substantiate the proposed mechanism of pyrolysis, and to rationalize the thermal gas‐phase reactivities of the ylides under study. Copyright © 2010 John Wiley & Sons, Ltd.     

Computational design of tetrazolone‐based high‐energy density energetic materials: Property prediction and decomposition mechanism

The density functional theory methods are used to design a series of new highly energetic tetrazolone‐based molecules by the combination of the linked tetrazolone framework and versatile substitutes. The molecular and electronic structures, physicochemical, and energetic properties were analyzed and predicted. The decomposition mechanisms were computationally simulated, and 3 potential decomposition channels were proposed. These newly designed tetrazolone‐based compounds show high densities (up to 2.08 g/cm³) and highly positive heats of formation (407.0‐1377.9 kJ/mol) due to all right content of nitrogen and oxygen. Most of them exhibit good detonation velocity (8.31‐9.62 km/s) and detonation pressure (32.40‐43.86 GPa), and some are comparative to excellent explosive CL‐20. Results show that compounds 6 , 10 , 11 , 12 , 15 , 16 , 17 , 22 , 23 , and 24 own superior detonation performance than widely used explosive HMX and may be promising candidates of green high‐performance energetic materials.     

Joint theoretical and experimental study of the gas‐phase elimination kinetics of tert‐butyl ester of carbamic,N, N‐dimethylcarbamic,N‐hydroxycarbamic acids and 1‐(tert‐butoxycarbonyl)‐imidazole

The gas‐phase elimination kinetics of the title compounds were carried out in a static reaction system and seasoned with allyl bromide. The working temperature and pressure ranges were 200–280 °C and 22–201.5 Torr, respectively. The reactions are homogeneous, unimolecular, and follow a first‐order rate law. These substrates produce isobutene and corresponding carbamic acid in the rate‐determining step. The unstable carbamic acid intermediate rapidly decarboxylates through a four‐membered cyclic transition state (TS) to give the corresponding organic nitrogen compound. The temperature dependence of the rate coefficients is expressed by the following Arrhenius equations: for tert‐butyl carbamate logk₁ (s^?1) = (13.02 ± 0.46) – (161.6 ± 4.7) kJ/mol(2.303 RT)^?1, for tert‐butyl N‐hydroxycarbamate logk₁ (s^?1) = (12.52 ± 0.11) – (147.8 ± 1.1) kJ/mol(2.303 RT)^?1, and for 1‐(tert‐butoxycarbonyl)‐imidazole logk₁ (s^?1) = (11.63 ± 0.21)–(134.9 ± 2.0) kJ/mol(2.303 RT)^?1. Theoretical studies of these elimination were performed at Møller–Plesset MP2/6‐31G and DFT B3LYP/6‐31G(d), B3LYP/6‐31G(d,p) levels of theory. The calculated bond orders, NBO charges, and synchronicity (Sy) indicate that these reactions are concerted, slightly asynchronous, and proceed through a six‐membered cyclic TS type. Results for estimated kinetic and thermodynamic parameters are discussed in terms of the proposed reaction mechanism and TS structure. Copyright © 2007 John Wiley & Sons, Ltd.     

A theoretical investigation about sensing mechanism of fluoride anion for (E)‐2‐(2‐(dimethylamino)ethyl)‐6‐(4‐hydroxystyryl)‐1H‐benzo[de]‐isoquinoline‐1,3 (2H)‐dione

In the present work, we theoretical study the sensing mechanism of a new fluoride chemosensor (E)‐2‐(2‐(dimethylamino)ethyl)‐6‐(4‐hydroxystyryl)‐1H‐benzo[de]‐isoquinoline‐1,3(2H)‐dione (the abbreviation is NIM ). Based on density functional theory and time‐dependent density functional theory methods, the fluoride anion response mechanism has been confirmed via constructing potential energy curve. The exothermal deprotonation process along with the intermolecular hydrogen bond O–H···F reveals the uniqueness of detecting F^?. After capturing hydrogen proton forming NIM‐A anion configuration, a new absorption peak around 655 nm appears in dimethyl sulfoxide solvent. In addition, the emission of NIM can be quenched when adding F^? has been also confirmed. Due to the twisted intramolecular charge transfer character NIM‐A‐S ₁ form, we further verify the experimental phenomenon. The theoretical electronic spectra (vertical excitation energies and fluorescence peak) reproduced previous experimental results (ACS Appl. Mater. Interfaces 2014, 6, 7996), which not only reveals the rationality of our theoretical level used in this work but also confirms the correctness of geometrical attribution. In view of the excitation process, the strong intramolecular charge transfer process of S₀ → S₁ transition explain the redshift of absorption peak for NIM with the addition of fluoride anion. This work presents a straightforward sensing mechanism (deprotonation process) of fluoride anion for the novel NIM chemosensor.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

FT‐Raman,FT‐IR spectra and DFT calculations on monomeric and dimeric structures of 5‐fluoro‐ and 5‐chloro‐salicylic acid

The experimental and theoretical study on the structures and vibrations of 5‐fluoro‐salicylic acid and 5‐chloro‐salicylic acid (5‐FSA and 5‐ClSA, C₇H₅FO₃ and C₇H₅ClO₃) is presented. The Fourier transform infrared spectra (4000–400 cm⁻¹) and the Fourier transform Raman spectra (4000–50 cm⁻¹) of the title molecules in the solid phase were recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman intensities and Raman scattering activities were calculated for a pair of molecules linked by the intermolecular O H···O hydrogen bond. The geometrical parameters and energies of 5‐FSA and 5ClSA were obtained for all eight conformers/isomers from density functional theory (DFT) (B3LYP) with 6‐311++G(d,p) basis set calculations. The computational results identified the most stable conformer of 5‐FSA and 5‐ClSA as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The spectroscopic and theoretical results were compared with the corresponding properties for 5‐FSA and 5‐ClSA monomers and dimer of C1 conformer. The optimized bond lengths, bond angles and calculated wavenumbers showed the best agreement with the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

UV‐induced transformations of matrix‐isolated 1,3,4‐thiadiazole‐2‐thiones

Monomers of 5‐mercapto‐1,3,4‐thiadiazole‐2‐thione (bismuthiol) were studied using an experimental matrix‐isolation technique as well as by carrying out theoretical quantum chemical calculations. The calculations, performed using the quadratic configuration interaction method with single and double excitations (QCISD)/6‐31++G(d,p)//DFT(B3LYP)/6‐311++G(2d,p), predict that the thione–thiol tautomer of bismuthiol should be significantly (by more than 19 kJ mol^?1) more stable than other tautomeric forms. Accordingly, only the signatures of the thione–thiol tautomer were observed in the FT‐IR spectrum of bismuthiol, recorded directly after deposition of an Ar matrix. UV (λ > 320 nm) irradiation induced the conversion of the thione–thiol tautomer into the dithiol form. Analogous investigations were carried out for two related compounds: 5‐methyl‐1,3,4‐thiadiazole‐2‐thione and 5‐methylthio‐1,3,4‐thiadiazole‐2‐thione. For these two species, only the thione tautomeric forms were observed after deposition of Ar matrices. These tautomers were predicted (by QCISD calculations) to be more stable (by at least 19 kJ mol^?1) than other tautomeric forms. Upon UV irradiation, the most stable thione forms of these compounds were transformed into the corresponding thiol tautomers. Direct observation of the thione → thiol phototautomeric processes provides a clear proof that intramolecular proton transfer reaction can occur in molecules, such as bismuthiol, in spite of the increased NH···S distance, in comparison to other phototautomerizing species studied so far. All the isomers of the studied compounds (substrates and products of the photoreactions) were identified by comparison of their IR spectra with the spectra calculated at the DFT(B3LYP)/6‐311++G(2d,p) level of theory for possible isomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Enthalpies of formation and isomerization of cis‐ and trans‐decalin,and their oxa‐analogs by G3(MP2)//B3LYP calculations

G3(MP2)//B3LYP calculations have been carried out on trans‐ and cis‐decalin, and their mono‐, di‐, tri‐, and tetraoxa‐analogs. The main purpose of the work was to obtain enthalpies of formation for these compounds, and to study the relative stabilities of the cis–trans and positional isomers of the various (poly)oxadecalins. Comparison of the computational enthalpies of formation with the respective experimental ones, known only for the decalins and 1,3,5,7‐tetraoxadecalins, shows that in both cases the computational values are more negative than the experimental ones, the deviations being ?5 to ?7 kJ mol^?1 for the decalins and ?12 to ?17 kJ mol^?1 for the 1,3,5,7‐tetraoxadecalins. The respective computational enthalpies of cis–trans isomerization, however, are in excellent to satisfactory agreement with the experimental data. The cis–trans enthalpy differences vary from +11.0 kJ mol^?1 for decalin to ?15.4 kJ mol^?1 for 1,4,5,8‐tetraoxadecalin. Low relative enthalpy values were also calculated for the cis isomers of 1,8‐dioxadecalin (?3.7 kJ mol^?1), 1,3,6‐trioxadecalin (?4.6 kJ mol^?1), 1,3,8‐trioxadecalin (?9.7 kJ mol^?1), 1,4,5‐ trioxadecalin (?5.6 kJ mol^?1), 1,3,5,8‐tetraoxadecalin (?7.3 kJ mol^?1), and 1,3,6,8‐tetraoxadecalin (?14.5 kJ mol^?1). Copyright © 2009 John Wiley & Sons, Ltd.     

Thermolysis and photolysis of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide

The thermal and light‐induced O ? O bond breaking of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide (IQOOH) were studied using ¹H NMR, steady‐state UV/vis spectroscopy, femtosecond UV/vis transient absorption (fs TA) and time‐dependent density functional theory (TD DFT) calculations. Thermal O ? O bond breaking occurs at room temperature to generate water and the corresponding amide. The rate of this reaction, k = 5.4 · 10^?6 s^?1, is higher than the analogous rates of simple alkyl and aryl hydroperoxides; however, the rate significantly decreases in the presence of small amounts of methanol. The calculated structure of the transition state suggests that the thermolysis is facilitated by a 1,2 proton shift. The photochemical process yields the same products, as confirmed using NMR and UV/vis spectroscopy. However, the quantum yield for the photolysis is low (Φ = 0.7%). Fs TA studies provide additional detail of the photochemical process and suggest that the S₁ state of IQOOH undergoes fast internal conversion to the ground state, and this process competes with the excited‐state O ? O bond breaking. This result was supported by the fact that the model compound IQOH exhibits similar excited‐state decay lifetimes as IQOOH, which is assigned to the S₁ → S₀ internal conversion. Copyright © 2013 John Wiley & Sons, Ltd.