Ni(II) and Zn(II) Complexes Containing Alkynyl Functionalized Salicylaldimine Ligand and Heterocyclic Coligand: Synthesis,Characterization and Luminescence Properties

Some nickel(II) and zinc(II) complexes of the type [Ni(L)(phen/bipy)]X (1a–6a) and [Zn(L) (phen/bipy)]X (1b–6b) (where L = 2-{(E)-[(4-trimethylsilylethynylphenyl)imino]methyl}-4-(4-nitro phenylethynyl)phenol; phen = 1, 10-phenanthroline, bipy = 2, 2´-bipyridine; X = ClO₄ ^?, BF₄ ^?, PF₆ ^?) have been prepared and characterized on the basis of elemental analyses, FTIR, ¹H NMR and mass spectral studies. The molecular structure of L was determined by single crystal X-ray diffraction studies. The electrochemical behaviour of the Ni(II) complexes indicate that the phen complexes appears at more positive potential as compared to those for bipy complexes, as a consequence of its strong π-acidic character. TGA was carried out to study the thermal behavior of the complexes. Room temperature luminescence is observed for all complexes corresponds to π → π* ILCT transition. The size of the counter anion and heterocyclic coligands phen and bipy shows marked effect on emission properties of the complexes.     

Thermal and electrochemical properties of poly(butylene sulfite)-based polymer electrolyte

Poly(butylene sulfite) (poly-1) was synthesized by cationic ring-opening polymerization of butylene sulfite (1), which was prepared by the reaction of 1,4-butanediol and thionyl chloride, with trifluoromethanesulfonic acid (TfOH) in bulk. The polymer electrolytes composed of poly-1 with lithium salts such as bis(trifluoromethanesulfonyl)imide (LiN(SO₂CF₃)₂, LiTFSI) and bis(fluorosulfonyl)imide (LiN(SO₂F)₂, LiFSI) were prepared, and their ionic conductivities, thermal, and electrochemical properties were investigated. Ionic conductivities of the polymer electrolytes for the poly-1/LiTFSI system increased with lithium salt concentrations, reached maximum values at the [LiTFSI]/[repeating unit] ratio of 1/10, and then decreased in further more salt concentrations. The highest ionic conductivity values at the [LiTFSI]/[repeating unit] ratio of 1/10 were 2.36?×?10^?4 S/cm at 80 °C and 1.01?×?10^?5 S/cm at 20 °C. On the other hand, ionic conductivities of the polymer electrolytes for the poly-1/LiFSI system increased with an increase in lithium salt concentrations, and ionic conductivity values at the [LiFSI]/[repeating unit] ratio of 1/1 were 1.25?×?10^?3 S/cm at 80 °C and 5.93?×?10^?5 S/cm at 20 °C. Glass transition temperature (T _g) increased with lithium salt concentrations for the poly-1/LiTFSI system, but T _g for the poly-1/LiFSI system was almost constant regardless of lithium salt concentrations. Both polymer electrolytes showed high transference number of lithium ion: 0.57 for the poly-1/LiTFSI system and 0.56 for the poly-1/LiFSI system, respectively. The polymer electrolytes for the poly-1/LiTFSI system were thermally more stable than those for the poly-1/LiFSI system.     

Copper(I) Complexes of N-(2-{[(2E)-2-(4-Nitrobenzylidenyl)Hydrazinyl]Carbonyl}Phenyl)Benzamide and Triphenylphosphine: Synthesis,Characterization and Luminescence Properties

Copper(I) complexes of the formula [Cu(L)(PPh₃)₂]X (1–4) (X = Cl(1), ClO₄(2), BF₄(3) and PF₆(4)) [where L = N-(2-{[(2E)-2-(4-nitrobenzylidenyl)hydrazinyl]carbonyl}phenyl)benzamide; PPh₃ = triphenylphosphine] have been prepared by the condensation of N-[2-(hydrazinocarbonyl)phenyl]benzamide with 4-nitrobenzaldehyde followed by the reaction with CuCl, [Cu(MeCN)₄]ClO₄, [Cu(MeCN)₄]BF₄ and [Cu(MeCN)₄]PF₆ in presence of triphenylphosphine as a coligand. Complexes 1–4 were then characterized by elemental analyses, FTIR, UV-visible and ¹H NMR spectroscopy. Mononuclear copper(I) complexes 1–4 were formed with L in its keto form by involvement of azomethine nitrogen and the carbonyl oxygen along with two PPh₃ groups. A single crystal X-ray diffraction study of the representative complex [(Cu(L)(PPh₃)₂]CIO₄ (2) reveals a distorted tetrahedral geometry around Cu(I). Crystal data of (2): space group = C2/c, a = 42.8596 (9) Å, b = 14.6207 (3) Å, c = 36.4643 (7) Å, V = 20,653.7 (7) ų, Z = 16. Complexes 1–4 exhibit quasireversible redox behaviour corresponding to a Cu(I)/Cu(II) couple. All complexes show blue-green emission as a result of fluorescence from an intra-ligand charge transition (ILCT), ligand to ligand charge transfer transition (LLCT) or mixture of both. Significant increase in size of the counter anion shows marked effect on quantum efficiency and lifetime of the complexes in solution.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

Novel Fluorometric Turn On Detection of Aluminum by Chalcone-Based Chemosensor in Aqueous Phase

A novel, 100% water-soluble chalcone based chemosensing receptor {1-[3-(2-Hydroxy-phenyl)-3-oxo-propenyl]-naphthalen-2-yloxy}-acetic acid, L was synthesized and characterized. The receptor L is designed based on the chelation enhanced fluorescence (CHEF) mechanism. The chemosensing properties of L were evaluated by UV–vis and fluorescence spectrometric methods. It exhibits highly selective recognition ability towards aluminum ions in water over other metal ions. The binding stoichiometry of L? Al³⁺ complex is 2:1 by means of Job’s plot and the detection limit is 5.66?×?10^??8 M.     

A New Piperidine Derivatized-Schiff Base Based “Turn-on” Cu<Superscript>2+</Superscript>Chemo-Sensor

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu²⁺ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu²⁺ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu²⁺ over other metal ions (Ni²⁺, Zn²⁺, Hg²⁺, Co²⁺, Cd²⁺, Al³⁺, Fe²⁺, and Pb²⁺). The binding stoichiometry between L and Cu²⁺ has been investigated using Job’s plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu²⁺ complex with binding constant (K _a) of 4?×?10⁴ LM^?1.     

Salicylaldehyde Phenylhydrazone: A New Highly Selective Fluorescent Lead (II) Probe

The fluorescence intensity of salicylaldehyde phenylhydrazone (L), in 1:1 (v/v) CH₃OH:H₂O was enhanced by ca. 100 times with a blue shift in emission maximum, on interaction with Pb²⁺ ion. No enhancement in fluorescent intensity of L was observed on interaction with metal ions - Na⁺, K⁺, Ca²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cd²⁺ and Hg²⁺. This signal transduction was found to occur via photoinduced electron transfer (PET) mechanism. A 1:1 complexation between Pb²⁺ and L with log β?=?7.86 has been proved from fluorescent and UV/Visible spectroscopic data. The detection limit of Pb²⁺ was calculated to be 6.3?×?10^?7?M.     

Liquid-crystalline dendrimer Cu(II) complexes and Cu(0) nanoclusters based on the Cu(II) complexes: An electron paramagnetic resonance investigation

New nanostructured materials, namely, the liquid-crystalline copper(II) complexes that contain poly(propylene imine) dendrimer ligands of the first (ligand 1) and second (ligand 2) generations and which have a columnar mesophase and different copper contents (x = Cu/L), are investigated by EPR spectroscopy. The influence of water molecules and nitrate counterions on the magnetic properties of complex 2 (x = 7.3) is studied. It is demonstrated that water molecules can extract some of the copper ions from dendrimer complexes and form hexaaqua copper complexes with free ions. The dimer spectra of fully hydrated complex 2 (x = 7.3) are observed at temperatures T < 10 K. For this complex, the structure is identified and the distance between the copper ions is determined. It is shown that the nitrate counterion plays the role of a bridge between the hexaaqua copper(II) complex and the dendrimer copper(II) complex. The temperature-induced valence tautomerism attended by electron transport is revealed for the first time in blue dendrimer complexes 1 (x = 1.9) with a dimer structure. The activation energy for electron transport is estimated to be 0.35 meV. The coordination of the copper ion site (NO₄) and the structural arrangement of green complexes 1 (x = 1.9) in the columnar mesophase are determined. Complexes of this type form linear chains in which nitrate counterions serve as bridges between copper centers. It is revealed that green complexes 1 (x = 1.9) dissolved in isotropic inert solvents can be oriented in the magnetic field (B ₀ = 8000 G). The degree of orientation of these complexes is rather high (S _z = 0.76) and close to that of systems with a complete ordering (S _z = 1) in the magnetic field. Copper(0) nanoclusters prepared by reduction of complex 2 (x = 7.3) in two reducing agents (NaBH₄, N₂H₄ · H₂O) are examined. A model is proposed for a possible location of Cu(0) nanoclusters in a dendrimer matrix.     

Synthesis and Evaluation of a Schiff-Based Fluorescent Chemosensors for the Selective and Sensitive Detection of Cu<Superscript>2+</Superscript> in Aqueous Media with Fluorescence Off-On Responses

Copper being an essential nutrient; also pose a risk for human health in excessive amount. A simple and convenient method for the detection of trace amount of copper was employed using an optical probe R1 based on Schiff base. The probe was synthesized by Schiff base condensation of benzyl amine and 2-hydroxy-1-napthaldehyde and characterized by single X-ray diffraction, ¹H NMR and FTIR. By screening its fluorescence response in a mixture of DMSO and H₂O (20:80, v/v) R1 displayed a pronounced enhancement in fluorescence only upon treatment with copper. Other examined metal ions such as alkali, alkaline and transition had no influence. Within a wide pH range 5–12 R1 could selectively detect copper by interrupting ICT mechanism that results in CHEF. From Job’s plot analysis a 2:1 binding stoichiometry was revealed. The fluorescence response was linear in the range 1–10?×?10^?9 M with detection limit 30?×?10^?9 M. Association constant was determined as 1?×?10¹¹ M^?2 by Benesi-Hilderbrand plot. As a fast responsive probe it possesses good reproducibility and was employed for detection of copper in different water samples.     

Calix[4]arene Based Dual Fluorescent Sensor for Al<Superscript>3+</Superscript> and S<Subscript>2</Subscript>O<Subscript>7</Subscript><Superscript>2−</Superscript>

Specific functionalized calix[4]arene based fluorescent chemosensor was synthesized for cations and anions binding efficiency examination. Receptor C4MA displayed strong affinity for Al³⁺and S₂O₇ ^2? with enhanced fluorescence intensity. The selective response of C4MA was investigated in the presence of different co-existing competing ions. The limit of detection (LOD) of Al³⁺and S₂O₇ ^2? was calculated as 2.8?×?10^?6 M and 2.6?×?10^?7 M respectively. Sensor C4MA forms (1:1) stoichiometric complex with both Al³⁺ and S₂O₇ ^2? and their binding constants were calculated as 12.1?×?10⁴ and 8.3?×?10³ respectively. Complexes were also characterized through FT-IR spectroscopy.

Open image in new window

Graphical Abstract ?

     

Bis-Benzimidazolyl Diamide Based Fluorescent Probe for Copper(II): Synthesis, Structural and Fluorescence Studies

A new fluorescent probe based on a bis-benzimidazole diamide N ²,N ^2′-bis[(1-ethyl-benzimidazol-2-yl)methyl]biphenyl-2,2′-dicarboxamide ligand L ₁ with a biphenyl spacer group and a Copper(II) trinuclear metallacycle has been synthesized and characterized by X-ray single crystallography, elemental and spectral (FT-IR, ¹H & ¹³C NMR, UV-Visible) analysis. The fluorescence spectra of L ₁ in MeOH show an emission band centered at 300 nm. This band arises due to benzimidazolyl moiety in the ligating system. The diamide L ₁ in the presence of Cu²⁺ show the simultaneous ‘quenching’ of (300 nm) and ‘enhancement’ of (375 nm) emission band. Similar fluorescence behavior was found in water–methanol mixture (9:1). The new emission band at 375 nm is attributed to intra ligand π–π* transition of the biphenyl moiety. L ₁ exhibited high selectivity and sensitivity towards Cu²⁺ in both the medium over other common metal ions like Ni²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Pb²⁺ and Hg²⁺. The binding constant with Cu²⁺ was calculated by the Benesi-Hildebrand equation. Selective “off-on-off” behavior of L ₁ in methanol has also been studied. The fluorescent intensity of 375 nm bands in L ₁ enhances (turns-on) upon addition of Cu²⁺ and quenches (turn-off) upon addition of Na₂-EDTA.     

Orange Fluorescent Ru(III) Complexes Based on 4′-Aryl Substituted 2,2′:6′,2″-Terpyridine for OLEDs Application

A series of ruthenium (III) complexes of the formulae [Ru(4-Mephtpy)₂]Cl₃(1) [Ru(L ₁ )], [Ru(3,4,5-tmphtpy)₂]Cl₃(2) [Ru(L ₂ )], and [Ru(4-thptpy)₂]Cl₃(3) [Ru(L ₃ )], (where L?=?terpy?=?2.2′:6′2″ terpyridine ligands) are synthesized. The complexes were characterized by elemental analyses, spectroscopic and electrochemical data. The density functional theory (DFT) outlines the geometric optimisation and electronic charge transition of these complexes. Photophysical studies describe that the luminescence of Ru(III) complexes is due to electronic transition between the energy levels of singly unoccupied molecular orbitals (SUMO) and singly occupied molecular orbitals (SOMO). It also exhibits the potential charge transfer to π–π* and n–π* states due to MLCT and ILCT processes of the complexes. The observed bands centered at 591 and 620 nm demonstrate that these emissions originated from the transition of SUMO to SOMO energy levels, that is, from the radiative decay from the doublet exciton. Due to the heavy metal effect of Ru(III) ions the photophysical behaviour depends on the MLCT process. In conclusion, that the all three Ru(L ₁ -L ₃ ) complexes are fallen orange emission.     

Synthesis,Characterization and Luminescence Sensitivity with Variance in pH,DNA and BSA Binding Studies of Ru(II) Polypyridyl Complexes

Three ruthenium(II) polypyridyl complexes, [Ru(phen)₂(mip)](ClO₄)₂ (1) (phen =1,10-Phenanthroline), [Ru(bpy)₂(mip)](ClO₄)₂ (2) (bpy = 2,2’bipyridyl) and [Ru(dmb)₂(mip)](ClO₄)₂ (3) (dmb = 4, 4′-dimethyl 2, 2′-bipyridine), were synthesized with an intercalative ligand mip (2-morpholino-1H-imidazo[4,5-f][1, 10]phenanthroline) and characterized by ¹H, ¹³C–NMR, IR, UV-vis, mass spectra and elemental analysis. pH effect, ion selectivity (cations, anions) and solvent sensitivity of complexes were studied. The interaction of these complexes with DNA was performed using absorption, emission spectroscopy and viscosity measurements. The experimental results indicated that the two complexes interacted with calf thymus DNA (CT-DNA) by intercalative mode. BSA (Bovine Serum Albumin) protein binding of these complexes was studied by UV-visible and fluorescence techniques. The binding capacity of these complexes was explained theoretically by molecular docking method.     

Synthesis,Spectral Characterization,DNA/ Protein Binding,DNA Cleavage,Cytotoxicity, Antioxidative and Molecular Docking Studies of Cu(II)Complexes Containing Schiff Base-bpy/Phen Ligands

Ternary Cu(II) complexes [Cu(II)(L)(bpy)Cl] 1, [Cu(II)(L)(Phen)Cl] 2 [L = 2,3–dimethyl-1-phenyl-4(2 hydroxy-5-methyl benzylideneamino)-pyrazol-5-one, bpy = 2,2^′ bipyridine, phen =1,10 phenanthroline) were synthesized and characterized by elemental analyses, UV-Visible, FT-IR, ESR, Mass, thermogravimetric and SEM EDAX techniques. The complexes exhibit octahedral geometry. The interaction of the Cu(II) with cailf thymus DNA (CT-DNA) was explored by using absorption and fluorescence spectroscopic methods. The results revealed that the complexes have an affinity constant for DNA in the order of 10⁴ M^?1 and mode of interaction is intercalative mode. The DNA cleavage study showed that the complexes cleaved DNA without any external agent. The interaction of Cu(II) complexes with bovine serum albumin (BSA) was also studied using absorption and fluorescence techniques. The cytotoxic activity of the Cu(II) complexes was probed in HeLa (human breast adenocarcinoma cell line), B16F10 (Murine melanoma cell line) and HEPA1–6 celllines, complex 1 has good cytotoxic activity which is comparable with the doxarubicin drug, with IC₅₀ values ranging from 3 to 12.6 μM. A further molecular docking technique was employed to understand the binding of the complexes towards the molecular target DNA. Investigation of the antioxidative properties showed that the metal complexes have significant radical scavenging activity potency against DPPH radical.     

Coumarin Based Fluorescent Probe for Colorimetric Detection of Fe<Superscript>3+</Superscript> and Fluorescence Turn On-Off Response of Zn<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A new coumarin based Schiff-base chemosensor-(E)-7-(((8-hydroxyquinolin-2-yl)methylene) amino)-4-methyl-2H-chromen-2-one (H ₁₁ L) was synthesized and evaluated as a colorimetric sensor for Fe³⁺ and fluorescence “turn on-off” response of Zn²⁺ and Cu²⁺ using absorption and fluorescence spectroscopy. Upon treatment with Fe³⁺ and Zn²⁺, the absorption intensity as well as the fluorescence emission intensity increases drastically compared to other common alkali, alkaline earth and transition metal ions, with a distinct color change which provide naked eye detection. Formation of 1:1 metal to ligand complex has been evaluated using Benesi-Hildebrand relation, Job’s plot analyses, ¹H NMR titration as well as ESI-Mass spectral analysis. The complex solution of H ₁₁ L with Zn²⁺ ion exhibited reversibility with EDTA and regenerate free ligand for further Zn²⁺ sensing. H ₁₁ L exhibits two INHIBIT logic gates with two different chemical inputs (i) Zn²⁺ (IN1) and Cu²⁺ (IN2) and (ii) Zn²⁺ (IN1) and EDTA (IN2) and the emission as output. Again, an IMPLICATION logic gate is obtained with Cu²⁺ and EDTA as chemical inputs and emission as output mode. Both free ligand as well as metal-complexes was optimized using density functional theory to interpret spectral properties. The corresponding energy difference between HOMO-LUMO energy gap for H ₁₁ L, H₁₁L-Zn²⁺ and H₁₁L-Cu²⁺ are 2.193, 1.834 and 0.172 eV, respectively.     

Some exact solutions of the local induction equation for the motion of a vortex in a Bose–Einstein condensate with a Gaussian density profile

The dynamics of a vortex filament in a Bose–Einstein condensate whose equilibrium density in the reference frame rotating at the angular velocity Ω is Gaussian with the quadratic form r·D?r has been considered. It has been shown that the equation of motion of the filament in the local-induction approximation permits a class of exact solutions in the form R(β, t) = βM(t) + N(t) of a straight vortex, where β is the longitudinal parameter and is the time. The vortex slips over the surface of an ellipsoid, which follows from the conservation laws N · D?N=C ₁ and M · D?N=C ₀=0. The equation of the evolution of the tangential vector M(t) appears to be closed and has integrals of motion M ·D?M=C ₂ and (|M| ? M· G?Ω) = C, with the matrix G? = 2(I?TrD? ? D?)^?1. Crossing of the respective isosurfaces specifies trajectories in the phase space.     

Synthesis and Characterization of Ln(III) Complexes and its Luminescence Properties

Hexadentate ligand L and its Ln³⁺ complexes EuLCl₃ (1), TbLCl₃ (2), SmLCl₃ (3) are synthesised. All these complexes are well characterized for their photophysical properties such as luminescence lifetime decay(τ) and overall quantum yield(Φ). These complexes being water soluble, depicts their intense metal centred luminescence. Effect of pH on these complexes suggest that their emission intensities are stable in the pH range 4–9 and show their compatibility to function in the physiological pH.

Open image in new window

Graphical Abstract Normalized emisson spectra of complex 1, 2 and 3 (1x10^-5M) in HEPES Buffer at pH 7.4 (λexc=276nm)

     

Polymer electrolytes based on vinyl ethers with various EO chain length and their polymer electrolytes cross-linked by electron beam irradiation

Polymer electrolytes based on vinyl ethers with various ethyleneoxy (EO) chain length (poly-1a (m?=?3), poly-1b (m?=?6), poly-1c (m?=?10), and poly-1d (m?=?23.5)) with lithium bis(trifluoromethanesulfonimide) (LiTFSI) were prepared, and effect of pendant EO chain length in the polymers on electrochemical and thermal properties was investigated. Glass transition temperature (T _g) of all polymer electrolytes increased linearly with an increase in salt concentrations. Ionic conductivities of the polymer electrolytes increased with an increase in the pendant EO chain length of the polymers at the constant [Li]/[O] ratio, but in the polymer electrolyte of the poly-1d (m?=?23.5) with the longest pendant EO chain length, ionic conductivity decreased in the low temperature range of ?20 to 10 °C due to the crystallization of the pendant EO chain. The highest ionic conductivity, 1.23?×?10^?4 S/cm at 30 °C, was obtained in the polymer electrolyte of the poly-1c (m?=?10) with pendant EO chain length of 10 at the [Li]/[O] ratio of 1/20. It was found that the cross-linking of the polymer electrolyte, composed of poly-1c (m?=?10) with LiTFSI at the [Li]/[O] ratio of 1/28, by electron beam (EB) irradiation may improve the mechanical property without affecting ionic conductivity, thermal property, and oxidation stability. Polymer electrolytes based on poly-1a (m?=?3), poly-1b (m?=?6), poly-1c (m?=?10), and poly-1d (m?=?23.5) and cross-linked polymer electrolytes were electrochemically stable until 4 V and thermally stable around 300 °C.     

A New Fluorescent “Turn-Off” Coumarin-Based Chemosensor: Synthesis,Structure and Cu-Selective Fluorescent Sensing in Water Samples

We report the synthesis and characterization two coumarin-based fluorescence probes, N′-{[7-(diethylamino)-2-oxo-2H-chromen-3-yl]carbonyl}pyridine-3-carbohydrazide (3) and N′-benzoyl-7-(diethylamino)-2-oxo-2H-chromene-3-carbohydrazide (4), proposed as a novel fluorescent chemosensor. The two probes designed showed an instant turn-off fluorescence response to Cu²⁺ over other metal ions in ethanol-water mixture based on intramolecular charge transfer (ICT). It was found that pyridine-analogue coumarin is highly selective and sensitive sensor for Cu²⁺. The 3 sensor coordinates Cu²⁺ in 1:1 stoichiometry with a binding constant, K_a = 5.22 M^?1 and the detection limit was calculated 1.97 × 10^?9 M.     

Determination of electronic ground state properties of a dinuclear iron(II) spin crossover complex

The dinuclear complex [(Fe(L-N₄Me₂))₂(BiBzIm)](ClO₄)₂?2EtCN (1) has been investigated by Mössbauer spectroscopy carried out in the temperature range from 5 to 150 K with externally applied magnetic fields of up to B = 5 T. By means of a consistent simulation of all experimental data sets within the Spin Hamiltonian formalism, the zero-field splitting D and the rhombicity parameter E/D of the ferrous high-spin (HS) site in this complex was determined to be D = ?15.0 ± 1.0 cm^?1 and E/D = 0.33 respectively. The sign of the quadrupole splitting of the HS site is positive which indicates that this iron site of the dinuclear complex 1 has an electronic ground state with the d_xy orbital being twofold occupied.