Hexadentate ligand L and its Ln3+ complexes EuLCl3 (1), TbLCl3 (2), SmLCl3 (3) are synthesised. All these complexes are well characterized for their photophysical properties such as luminescence lifetime decay(τ) and overall quantum yield(Φ). These complexes being water soluble, depicts their intense metal centred luminescence. Effect of pH on these complexes suggest that their emission intensities are stable in the pH range 4–9 and show their compatibility to function in the physiological pH.
A bis(naphthalimide-piperazine) derivative (1) was synthesized as a pH-sensitive Off-On fluorescent probe. Operation mechanism of 1 is based on photo-induced electron transfer (PET) and its pH-dependent optical changes were investigated by using absorption and fluorescence spectroscopy. In the pH range of 11–4.5, this probe undergoes PET process from the piperazine to the naphthalimide moiety, leading to a fluorescence quenching. However, in the pH range of 4.5–1, the PET is inhibited to give a fluorescence enhancement. Moreover, the fluorescence ‘turn-on’ response of 1 is highly selective for protons (H+) over other metal cations, biomolecules and it shows a good reversibility between acidic and basic conditions.
A new efficient chemosensor 1 was prepared, for the detection of Fe3+ in solutions as a colorimetric and fluorescent sensor. The visual and fluorescent behaviors of the receptor toward various metal ions were also explored. The receptor shows exclusive response toward Fe3+ ions and also distinguishes Fe3+ from other cations by color change and fluorescence enhancement in hydroalcoholic solution (MeOH/H2O = 9/1, v/v). Thus, the receptor can be used as a colorometric and fluorescent sensor for the determination of Fe3+ ion. The fluorescence microscopy experiments showed that the chemosensor is efficient for detection of Fe3+ in vitro, developing a good image of the biological organelles.
Selective fluorescence turn on Zn2+ sensor with long-wavelength emission and a large Stokes shift is highly desirable in Zn2+ sensing area. We reported herein the synthesis and Zn2+ recognition properties of a new thiosemicarbazone-based fluorescent sensor L. L displays high selectivity and sensitivity toward Zn2+ over other metal ions in DMSO-H2O (1:1, v/v, HEPES 10 mM, pH = 7.4) solution with a long-wavelength emission at 572 nm and a large Stokes shift of 222 nm. Confocal fluorescence microscopy experiments demonstrate that L is cell-permeable and capable of monitoring intracellular Zn2+.
Graphical Abstract We report a new thiosemicarbazone-based fluorescent sensor (L) for selective recognition of Zn2+ with a long wavelength emission and a large Stokes shift.
In this study the researcher reports a novel, one step synthesized rod-like nanoparticles of cerium (III)—tetraphenylporphyrin sandwich complex as a spectrofluorometric sensor to measure trace amount of Hg (II) and Cu (II) metal ions. Moreover, the synthesized fluorescent probe was able to detect higher amounts (>10?4 M) of Hg (II) in aqueous media by changing the color which can also be used as a selective mercury naked-eye sensor. The selectivity and sensitivity of the sensor based on its fluorescence quenching in the presence of Hg (II) and Cu (II) were studied according to the Stern-Volmer equation. The detection limit of the sensor was 16 nM for Hg (II) and about 2.34 μM for Cu (II) ions.
Two new Cu(II) complexes with Picolinic acid and Tryptophan [Cu(II)(DPTR)(H2O)2](1:1) (1) and [Cu(II)(DPTR)(Phen)] (1:1:1) (2) were synthesized, characterized and studied their DNA binding, cleavage, docking and anti-cancer properties. The molecular modeling studies were carried out with energy minimized structures of metal complexes. CT-DNA binding studies revealed that the complexes bind through an intercalative mode and show good binding propensity. The docking study also confirms the intercalative mode of binding. The hydrolytic DNA cleavage activity of these complexes has been studied using gel electrophoresis. Complex 2 shows better efficiency than 1. Cell viability experiments indicated that the ligand, complexes show significant dose dependent cytotoxicity in selected cell lines.
Graphical Abstract Two new Cu(II) complexes with Picolinic acid and Tryptophan, [Cu(II)(DPTR)(H2O)2](1:1) (1) and [Cu(II)(DPTR)(Phen)] (1:1:1) (2) were synthesized, characterized and studied their DNA binding, cleavage, docking and anti-cancer properties.
The 2,2′-dinaphtholazobenzene molecular framework (P) was designed, synthesized and characterized. Its absorption and fluorescence properties revealed that P is a dual sensor for copper ions (Cu2+) and fluoride ions (F?) in DMSO. The colorimetric activities were clearly visible by naked eye upon the addition of the two ions. Fluorescence quenching and enhancement were observed when Cu2+ and F? ions were added respectively. Density Functional Theory (DFT) calculations were carried out to provide an insight into the interaction of guest ions (Cu2+ and F?) with P, and to explain how the molecular orbitals were affected.
Our present investigation aims at the synthesis and application of new, symmetric bridged bis-pyrazolone based acid dyes. The bis-pyrazolone compounds were accomplished from bis- hydrazine of 4,4′-Diaminostilbene-2,2′-disulfonic acid and ethyl acetoacetate. The bis-pyrazolones have been coupled with diazonium salts of o-hydroxyl aromatic amines which resulted in ligand dyes. The intermediate ligand dyes were treated with 3d transition metals to achieve the targeted metal complex acid dyes. The structures of investigated compounds were confirmed with the help of spectroscopic techniques. Dyes were applied on leather and their application parameters including their light fastness, wash fastness and rubbing fastness were determined.
New substituted thieno[3,2-c]pyridine derivatives 5 were synthesized by the reaction of 3-bromo-4-chlorothieno[3,2-c]pyridine 1 with cyclic amine 2, which further on Suzuki reaction with boronic acids 4 converted to corresponding 3-arylthieno[3,2-c]pyridine 5. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines.
Graphical Abstract New thieno[3,2-c]pyridine derivatives were synthesized from 3-bromo-4-chlorothieno[3,2-c]pyridine and cyclic amines, which by on Suzuki reaction with boronic acids converted to corresponding 3-arylthieno[3,2-c]pyridine. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines
A new type of fluorescent chemosensor based on tethered hexa-borondipyrromethene cyclotriphosphazene platform (HBTC) linked via triazole groups was designed and synthesized. Its sensing behavior toward metal ions was investigated by ultraviolet-visible and fluorescence spectroscopies. Addition of a Fe2+ ion to a tetrahydrofuran solution of HBTC gave a visual color change as well as a significantly quenched fluorescence emission, while other tested 19 metal ions induced no color or spectral changes. This compound was found to be highly selective and sensitive for Fe2+ with a low limit of detection (2.03 μM) which is, to the best of our knowledge, the superior than the previously studied chemosensors for Fe2+.
The solvatochromic 9-hydroxybenzo[b]quinolizinium ion is shown to operate as fluorescent probe for the detection of water in acetonitrile. The dual fluorescence of this photoacid and its dependence on the content of water in the medium enable the ratiometric analysis of the fluorescence data.
A series of five new terbium(III) ion complexes with 4,4-difluoro-1-phenylbutane-1,3-dione (HDPBD) and anciliary ligands was synthesized. The composition and properties of complexes were analyzed by elemental analysis, IR, NMR, powder X-ray diffaraction, TG-DTG and photoluminescence spectroscopy. These complexes exhibited ligand sensitized green emission at 546 nm associated with 5D4?→?7F5 transitions of terbium ion in the emission spectra. The photoluminescence study manifested that the organic ligands act as antenna and facilitate the absorbed energy to emitting levels of Tb(III) ion efficiently. The enhanced luminescence intensity and decay time of ternary C2-C5 complexes observed due to synergistic effect of anciliary ligands. The CIE color coordinates of complexes came under the green region of chromaticity diagram. The mechanistic investigation of intramolecular energy transfer in the complexes was discussed in detail. These terbium(III) complexes can be thrivingly used as one of the green component in light emitting material and in display devices.
Solvent free synthesis of 6,7-dihydroxy-3-(3-chlorophenyl) coumarin (CFHC) was designed and obtained by the interaction of 2-(2,4,5-trimethoxyphenyl)-1-(3-chlorophenyl)acrylonitrile with pyridinium hydrochloride in the presence of silica gel by using microwave irradiation. The characterization of CFHC was confirmed by FT-IR, 1H, 13C, 13C–APT and 2D HETCOR spectroscopy methods. The optical behavior of CFHC towards metal ions was investigated by UV-visible and fluorescence spectroscopy. CFHC showed “on–off” type fluorescence response towards Cu2+ with high selectivity in aqueous solution (CH3CN/H2O, 9/1, v/v). Once binding with Cu2+, CFHC-Cu2+ complex also displayed high selectivity for sulfide, resulting in “off–on” type sensing of sulfide anion.
Graphical abstract Visual fluorescence changes upon addition of various metal ions (5.0 eq.) to CFHC in CH3CN/H2O (90:10, v/v) under UV excitation (365 nm)
Two chemiluminescent compounds containing 2,5-di(thien-2-yl)pyrrole and pyridazine units, namely 5,7-di(thiophen-2-yl)-2,3-dihydro-1H-pyrrolo[3,4-d]pyridazine-1,4(6H)-dione (5) and 6-phenyl-5,7-di(thiophen-2-yl)-2,3-dihydro-1H-pyrrolo[3,4-d]pyridazine-1,4(6H)-dione (6), were successfully synthesized and electrochemically polymerized. The compounds have chemiluminescent properties and glow in the presence of hydrogen peroxide in basic medium. The intensity of the glow can be increased dramatically by using Fe3+ ions, hemin (1.0 ppm) or blood samples (1.0 ppm) as catalyst. The compounds 5 and 6 have one well-defined irreversible oxidation peak at 1.08 V and 1.33 V vs Ag/AgCl, respectively. Electrochemical polymerization of both 5 and 6 were carried out successfully by repeating potential scanning in the presence of BF3. Et2O in an electrolyte solution of 0.1 M LiClO4 dissolved in acetonitrile. The electronic band gaps (Eg) of the polymers P5 and P6 were found to be 2.02 eV and 2.16 eV, respectively. On the other hand, the corresponding polymers are electroactive and exhibited electrochromic features.
In water rhodamine 6G (Rh6G) tends to form aggregates at higher concentrations while in ethanol the aggregation is minimal. The extent of aggregation can be controlled by changing the water to ethanol ratio. In ethanol the absorption spectra have a low energy peak and a higher energy shoulder, which are assigned to the S1 π-π* transition and vibronic side band, respectively, of Rh6G monomers. In water the same two peaks absorption peaks are observed at low concentrations but at higher concentrations a new peak grows in, which is assigned to an H-dimer. Emission spectra are in agreement with these assignments, but also develop a third peak at higher concentrations that is assigned to emission from excimer aggregates. For the first time, the monomer and dimer average diameters were measured by light scattering to be 1.4?±?0.2 nm and 3.3?±?0.6 nm, which form in the ground state, leading to the observed excited states. In a mixed solvent the extent of aggregation can be controlled by selecting the ethanol to water ratio, even at the highest concentrations.
Electronic absorption and emission spectra of 3-acetyl coumarin, 3-(bromoacetyl) coumarin and 3-(di bromoacetyl) coumarin have been recorded at room temperature in thirteen solvents with different polarities. Both ground and excited state dipole moments have been calculated for both locally excited and charge transfer transitions by using the solvatochromic method. Excited state dipole moments of all the three compounds are higher than their ground state values. DFT calculations have been profound to estimate their ground and excited state dipole moments. The estimated change in dipole moment by the application of microscopic solvent polarity parameter and bulk solvent polarity methods are in close agreement. Concentration dependent dual fluorescence has been observed in the emission spectra of all the three compounds.
Copper is a part of various enzymes and helps them to function properly. It can be effectively used to produce promising anticancer drugs and presently, many studies are being pursued worldwide on the development of copper-based complexes as potential anticancer drugs. Herein, we briefly discuss the importance of reactive oxygen species in biological applications and copper(II) complexes as anticancer drugs. The anti-angiogenic properties of mono-nuclear copper(II) complexes have been demonstrated by in vivo chick embryo angiogenesis analysis. The plausible mechanism behind anticancer activity of these complexes is by the formation of excessive intracellular Reactive Oxygen Species (ROS). ROS is a composite term used for oxygen derivative non-radicals and free radicals of highly reactive components, that enhances the killing response of immune cells to microbial invasion. Previous reports have shown that ROS plays an important role as a messenger in cell cycling and normal cell signal transduction.
Nanocomposites with thermo and photo-switchable fluorescent properties were synthesized via mini-emulsion polymerization based on spiropyran and methyl methacrylate monomer. The photophysical behavior of fluorescence nanocomposites was investigated by fluorescence spectrophotometry in different temperature, UV-light and time of exposure. It was found that methyl methacrylate polymer is capable of acting as a protective layer and play a critical role in improving the photostability of colorants. The nanocomposites exhibited excellent fluorescent thermo-switching action with respect to the free spiro molecule.
A series of MZr4(PO4)6:Dy3+ (M = Ca, Sr, Ba) phosphors were prepared by the solid state diffusion method. Confirmation of the phase formation and morphological studies were performed by X-ray powder diffraction (XRD) measurements and scanning electron microscopy, respectively. Photoluminescence (PL) properties of these phosphors were thoroughly analyzed and the characteristic emissions of Dy3+ ions were found to arise from them at an excitation wavelength of 351 nm. The PL emission spectra of the three phosphors were analyzed and compared. The CIE chromaticity coordinates assured that the phosphors produced cool white-light emission and hence, they are potential candidates for UV excited white-LEDs (WLEDs).
Specific functionalized calix[4]arene based fluorescent chemosensor was synthesized for cations and anions binding efficiency examination. Receptor C4MA displayed strong affinity for Al3+and S2O72? with enhanced fluorescence intensity. The selective response of C4MA was investigated in the presence of different co-existing competing ions. The limit of detection (LOD) of Al3+and S2O72? was calculated as 2.8?×?10?6 M and 2.6?×?10?7 M respectively. Sensor C4MA forms (1:1) stoichiometric complex with both Al3+ and S2O72? and their binding constants were calculated as 12.1?×?104 and 8.3?×?103 respectively. Complexes were also characterized through FT-IR spectroscopy.
