Interfacial tension and wetting behavior of air/oil/ionic liquid systems

We measured the interfacial tension and the density of air/n-hexane, n-decane, 1-perfluorohexane/1-hexyl-3-methyl-imidazolium hexafluorophosphate systems as a function of temperature. From the air/ionic liquid surface tension values, it was suggested that Coulombic interaction between imidazolium cations and counter anions are not so much different between the surface and bulk. The density values indicated that the decrease of surface tension by saturating organics was closely correlated to the mutual solubility between ionic liquid and organics. Interfacial tension at the oil/ionic liquid interfaces suggested that ionic liquid molecules were more ordered at the oil/ionic liquid interfaces compared to the air/ionic liquid interfaces, but the decrease of the entropy due to the interfacial orientation of ionic liquid was compensated by the increase of the entropy due to the contact of different chemical species. The initial spreading coefficients and the Hamaker constants indicated that all the oil phases spread at the air/ionic liquid interfaces spontaneously, and form the complete wetting films.     

Interfacial activity of benzyloctadecyldimethyl ammonium chloride in a liquid/liquid extraction system

Interfacial tension and interfacial adsorption parameters for benzyloctadecyldimethyl ammonium chloride (BODMAC) in three organic diluents were determined and interpreted. The interfacial activity of BODMAC is affected by the type of the organic diluent and the composition of the aqueous phase. The general order of interfacial activity of BODMAC is n-heptane (5% isobutanol) > carbon tetrachloride > chloroform. The effectiveness of adsorption of BODMAC is not only dependent on the organic diluent, but also on the inorganic electrolytes in the aqueous phase.     

Integrity basis approach to the elastic free energy functional of liquid crystals

Using the method integrity basis, the most general SO(3)-invariant free energy density up to all powers in _xβ and up to second order in Q_xβ,y is established. The method provides all analytically independent elastic modes for nematics and cholesterics in the form of 33 so-called, irreducible invariants. Interestingly, among the irreducible invariants there are only three chiral terms (i.e. linear in Q_δ,β,y ). They give rise locally to three independent helix modes in chiral, biaxial liquid crystals. This conclusion generalizes results of Trebin and Govers and Vertogen and contradicts a statement of Pleiner and Brandt, according to which only one twist term is supposed to exist. The most general free energy expansion can be written as sum of 39 additive invariants, which are multiplied by arbitrary polynomials in TrQ² and TrQ³.     

Interfacial rheology of an ultrathin nanocrystalline film formed at the liquid/liquid interface

We report the interfacial properties of monolayers of Ag nanoparticles 10-50 nm in diameter formed at the toluene-water interface under steady as well as oscillatory shear. Strain amplitude sweep measurements carried out on the film reveal a shear thickening peak in the loss moduli (G") at large amplitudes followed by a power law decay of the storage (G') and loss moduli with exponents in the ratio 2:1. In the frequency sweep measurements at low frequencies, the storage modulus remains nearly independent of the angular frequency, whereas G" reveals a power law dependence with a negative slope, a behavior reminiscent of soft glassy systems. Under steady shear, a finite yield stress is observed in the limit of shear rate .gamma going to zero. However, for .gamma > 1 s-1, the shear stress increases gradually. In addition, a significant deviation from the Cox-Merz rule confirms that the monolayer of Ag nanoparticles at the toluene-water interface forms a soft two-dimensional colloidal glass.     

Interfacial tension of alkylglucosides in different APG/oil/water systems

The interfacial performance of pure alkylglucosides (C₈G₁, C₁₀G₁ and C₁₂G₁) and of technical grade alkylpolyglucoside (APG) surfactants was investigated in three different water/oil systems (decane, isopropylmyristate and 2-octyldodecanol). From the dependence of the interfacial tension on the surfactant concentration below the CMC the cross-sectional area of the molecules at the decane/water interface was estimated. The plateau values of the interfacial tension at the CMC _c are independent of temperature and almost independent of added electrolyte in the decane/water system. The ability of the surfactants to lower the oil/water interfacial tension is most pronounced for the nonpolar oil. The partition coefficient of the surfactant between oil and water phase (k _c) was estimated from the CMC and the observed break point of the interfacial tension after equilibration of the two phases. In decane/water,k _c is nearly zero for all surfactants studied. For the polar oils,k _c increases with the chain length of the surfactant up tok _c10 for C₁₂G₁ in octyldodecanol/water. The values of _c in the different oil/water systems appear to be correlated withk _c and exhibit a minimum neark _c=1.     

Quantum tunneling dynamics in multidimensional systems: a matching-pursuit description

Rigorous simulations of quantum tunneling dynamics in model systems with up to 20 coupled degrees of freedom are reported. The simulations implement an extension of the recently developed matching-pursuit/split-operator Fourier-transform method to complex-valued coherent-state representations. The resulting method recursively applies the time-evolution operator, as defined by the Trotter expansion to second order accuracy, in dynamically adaptive coherent-state representations generated by an approach that combines the matching-pursuit algorithm with a gradient-based optimization method.     

Solid-state graphene-based supercapacitor with high-density energy storage using ionic liquid gel electrolyte: electrochemical properties and performance in storing solar electricity

Journal of Solid State Electrochemistry - The electrochemical properties and high-density energy storage performance of graphene nano-platelet-based solid-state electrical double-layer...     

The effect of gravity on the drainage of a thin liquid film between a solid sphere and a liquid/fluid interface

A study has been made of the influence of gravitational forces on the thinning of the liquid film which forms as a solid sphere comes to rest on a liquid/fluid interface. It is found that rates of drainage can be dramatically affected by the ratio of gravity to surface tension forces within the film. At long times a secondary film can possibly be formed which spreads out radially from the apex of the sphere.     

AutoCal: a method for automatic energy calibration of β–γ systems based on a 137Cs spectrum

A method was developed and implemented that calculates energy versus channel calibrations. This method utilizes a ¹³⁷Cs spectrum acquired in β–γ coincidence. Both the γ singles and the β–γ coincident spectrum are utilized. The γ singles spectrum is utilized to calculate the γ detector energy versus resolution function. The Compton line in the β–γ coincidence is then used to calculate the β detector energy versus resolution function. Currently a linear regression (y = mx + b) is utilized to fit the data. However, higher order polynomials may easily be implemented if desired.     

Solvent systems for countercurrent chromatography: an aqueous two phase liquid system based on a room temperature ionic liquid

A new aqueous two phase liquid system (ATPS) based on the ionic liquid 1-butyl-3-methyl imidazolium chloride (BMIM Cl), potassium dibasic phosphate (K(2)HPO(4)) and water was recently proposed in the literature. The full phase diagram of this ATPS was prepared and some tie lines were fully determined. It was compared to classical ATPSs based on polyethylene glycol with an average molecular mass of 1000 (PEG 1000) and 10,000 (PEG 10000) and K(2)HPO(4). Two countercurrent chromatography (CCC) columns, a hydrostatic Sanki and a J type hydrodynamic CCC columns were used to test the liquid phase retention of these ATPSs in all possible configurations. It was found that the BMIM Cl ATPS liquid phases were much easier to retain in the two CCC columns than the PEG 1000 ATPS phases. Using protein and alcohol solutes, it was established that the BMIM Cl ATPS has a polarity completely different from that of the PEG 1000 ATPS. For example, ovalbumin partitions equally between the two phases of the PEG 1000 ATPS (K(D)=1.4) when it is completely located in the BMIM Cl upper phase of the ionic liquid ATPS (K(D)=180). The discrimination factor of the ionic liquid system and its intrinsic hydrophobicity were respectively found three times higher and ten times lower than the respective values of the PEG 1000 ATPS.     

Interfacial tension of a nematic liquid crystal/water interface with homeotropic surface alignment

Pendant drop experimental results are presented for the temperature dependence of the interfacial tension between water and the immiscible nematic liquid crystal 4'-pentyl-4-biphenylcarbonitrile (5CB) in the presence of the adsorbed surfactant cetyltrimethylammonium bromide (CTAB). Adsorption of the surfactant lowers the interfacial tension value and is also known from earlier work to induce a transition in liquid crystal surface alignment from planar to homeotropic [Brake et al. Langmuir 2003, 19, 6436.]. Discrepancies exist in the literature regarding the density of 5CB, and the density difference between 5CB and water in any case is very small. However, from the ability to form pendant 5CB drops, one may infer that the density of 5CB exceeds that of water over the entire temperature range studied (28-41 degrees C), in disagreement with the predictions of one earlier report on 5CB. The interfacial tension is shown to exhibit a relative maximum near the bulk 5CB nematic-isotropic transition temperature T(NI), regardless of which published data set of 5CB density values is used to analyze the measurements, with a possible discontinuity in tension occurring at T(NI). The anomalous shape of the interfacial tension curve, depending on the choice of the 5CB density data set, may be quite similar to that recently reported for the interface between 5CB and a hydrophobic, isotropic molten polymer (Rai et al. Langmuir 2003, 19, 7370).     

Computer simulation study of a nematogenic lattice model based on an elastic energy mapping of the pair potential

Director configurations in a nematic liquid crystal can be determined by minimizing its total elastic free energy, for given elastic constants and specific boundary conditions. In some cases, these configurations have been obtained by numerical procedures where the elastic free energy density plays the same role as the overall potential energy in a standard Metropolis Monte Carlo simulation. The interaction energies or potentials used in these studies are short ranged but, in general, not pairwise additive, unless the three elastic constants are set to a common value, thus reducing the potential to that in the well-known Lebwohl-Lasher lattice model. On the other hand, we can construct, in different ways, a lattice model with pairwise additive interactions, which approximately reproduces the elastic free energy density, where the parameters defining the pair potential are expressed as linear combinations of elastic constants. An anisotropic nematogenic pair interaction of this kind, originally proposed by Gruhn and Hess (T. Gruhn and S. Hess, Z. Naturforsch. A51, 1 (1996)), has recently been investigated by one of us, using a Monte Carlo simulation (S. Romano, Int. J. Mod. Phys. B 12, 2305 (1998)). Here we propose another approximate procedure for the mapping, and study the resulting pair potential model with the aid of Monte Carlo simulations. The behaviour of the nematic phases formed by the two models is compared together with the predictions of molecular field theory and the properties of the Lebwohl-Lasher model.     

n-Butylammonium carboxylates/Tf2O: ionic liquid based systems for the synthesis of unsymmetrical imides via a Ritter-type reaction

We have developed a new method for the preparation of unsymmetrical imides using liquid carboxylate salts via a Ritter-type process. The reactions were carried out with nitriles and n-butylammonium carboxylates as ionic liquids in the presence of triflic anhydride (Tf₂O) as the promoter. Mild reaction conditions, simplicity of the procedure, and proton-free conditions are the main advantages of this procedure.     

Phase equilibria in liquid crystalline systems based on polypropylenimine dendrimer

The thermodynamic characteristics of infinitely dilute solutions of saturated hydrocarbons in the columnar and isotropic polypropylenimine dendrimer phases were studied by gas chromatography. The contribution of the entropy Gibbs energy component to the solution of sorbates in a liquid crystalline solvent at a positive deviation from ideality was found to be predominant. A phase diagram of the binary system consisting of the dendrimer and nematic p-amyloxy-p′-cyanobiphenyl was constructed. The effect of the chemical nature and shape of component molecules on the mesomorphism of the mixtures is discussed.     

Self-assembled structures based on rare earth element salts in the interfacial layer of a liquid/liquid system

1. Download high-res image (189KB)
2. Download full-size image