Cytochrome c self-assembly on alkanethiol monolayer electrodes as characterized by AFM, IR, QCM, and direct electrochemistry

With the advantage of carbodiimide coupling chemistry, horse heart cytochrome c (cyt c) has been covalently immobilized onto self-assembled monolayers (SAMs) from 11-mercaptoundecanoic acid (MUDA) developed on single-crystal or polycrystalline gold substrate surfaces. The cyt c immobilized substrates thus prepared have been characterized by atomic force microscopy (AFM); we have succeeded in obtaining surface topographical images down to single-protein resolution. AFM imaging has also shown densely packed, uniform protein monolayer formation that is highly suggestive of self-assembly of cyt c molecules on MUDA SAMs. Covalent attachment of cyt c has been further evidenced by reflection-absorption FT-IR as well as microgravimetric analysis using a quartz crystal microbalance (QCM). In the latter, the specific MUDA and cyt c surface concentrations were determined to be 0.86 +/- 0.11 nmol cm-2 (n = 5) and 28 +/- 12 pmol cm-2 (n = 5), both of which agree fairly well with their theoretical counterparts. The obtained QCM chips having the cyt c/MUDA/Au interfacial structure were found to be capable of the direct electrochemistry of the surface-attached cyt c molecules. Cyclic voltammetric measurements on the chips gave particular redox waves showing characteristics of surface process. The electroactive protein surface concentration was determined to be 7.2 +/- 4.8 pmol cm-2 (n = 6); it was almost consistent with values found in literature, while it was limited to 26% in magnitude for the QCM data. This was deemed to have arisen from the orientation variation of the surface-confined cyt c molecules and is discussed briefly.     

Electrochemically triggered Michael addition on the self-assembly of 4-thiouracil: generation of surface-confined redox mediator and electrocatalysis

Generation of a surface-confined redox mediator (RM) by an electrochemically triggered Michael addition reaction and the electrocatalytic properties of the mediator are described. Electrogenerated o-quinone undergoes Michael addition reaction with the self-assembled monolayer (SAM) of 4-thiouracil (4-TU) on a gold (Au) electrode and yields a surface-confined RM, 1-(3,4-dihydroxyphenyl)-4-mercapto-1H-pyrimidin-2-one (DPTU). The Michael addition reaction depends on the electrolysis potential and time, solution pH, and concentration of catechol (CA) used in the reaction. The redox mediator, DPTU, exhibits reversible redox response, characterstic of a surface-confined species at approximately 0.22 V in neutral pH. The anodic peak potential of DPTU shifts by 58+/-2 mV while changing the solution pH by one unit, suggesting that protons and electrons taking part in the redox reaction are in the ratio of 1:1. The apparent rate constant (ksapp) for the heterogeneous electron-transfer reaction of the RM was determined to be 114+/-5 s-1. The surface coverage (Gamma) of DPTU on the electrode surface was 8.2+/-0.1x10(-12) mol/cm2. DPTU shows excellent electrocatalytic activity toward oxidation of reduced nicotinamide adenine dinucleotide (NADH) with activation overpotential, which is approximately 600 mV lower than that observed at the unmodified Au electrode. The dipositive cations in the supporting electrolyte solution amplify the electrocatalytic activity of DPTU. A 2.5-fold enhancement in the catalytic current was observed in the presence of Ca2+ or Ba2+ ions. The sensitivity of the electrode toward NADH in the presence and absence of Ca2+ ions was 0.094+/-0.011 and 0.04+/-0.0071 nA cm-2 nM-1, respectively. A linear increase in the catalytic current was obtained up to the concentration of 0.8 mM, and the electrode can detect amperometrically as low as 25 nM of NADH in neutral pH.     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.     

Electrochemical Oxidative Formation and Reductive Desorption of a Self-Assembled Monolayer of Decanethiol on a Au(111) Surface in KOH Ethanol Solution

Electrochemical oxidative adsorption and reductive desorption of a self-assembled monolayer (SAM) of decanethiol on a Au(111) single crystal electrode were examined in 0.1 M KOH ethanol solution containing various concentrations of decanethiol ranging from 1 muM to 1 mM. Anodic and cathodic current peaks corresponding to the adsorption and desorption of decanethiol, respectively, were observed in cyclic voltammograms of a Au(111) single crystal electrode obtained in 0.1 M KOH ethanol solution containing more than 10 muM of decanethiol. Positions of both peaks depended on the concentration of decanethiol, and they shifted negatively by ca. 0.057 V/decade with increase in decanethiol concentration. This result confirms that the adsorption and desorption of decanethiol is a one-electron process. The reductive charge, which consists of desorption charge and capacitive charge, increased when the sweep rate was decreased and the decanethiol concentration was increased and reached the saturated value of 103 (+/-5%) muC cm-2, which corresponds to the reductive charge of thiol SAM of full coverage with a ( radical3 x radical3)R30 degrees structure. Potentiostatic SAM formation was also investigated by holding the potential at +0.1 V. The reductive charge, i.e., the coverage of the SAM, increased with time and reached the saturated value of 103 (+/-5%) muC cm-2, corresponding to full coverage, after holding the potential at +0.1 V for a certain period of time. The time when the amount of adsorbed thiolate reached full coverage depended on the concentration of decanethiol. The higher the concentration was, the faster full coverage was reached. The desorption peak shifted negatively as the holding time at +0.1 V was increased even after the adsorbed amount had reached full coverage. These results suggest that the ordering of decanethiol SAMs requires a much longer time than the time required for full coverage adsorption. The position of the reductive desorption peak was independent of the thiol concentration if the electrode was kept at +0.1 V for long enough so that a highly ordered SAM was formed. The cathodic peak shifted negatively as the sweep rate was increased, showing that reductive desorption of the SAM was rather slow. The rate constant for the reductive desorption was determined from the potential dependent peak shift to be 0.24 s-1, which is in good agreement with the value obtained for a SAM prepared without potential control, indicating that the quality of the electrochemically prepared SAM is as good as that of the SAM prepared nonelectrochemically.     

Electrochemical determination of electroinactive guests of b-cyclodextrin at a self-assembled monolayer interface

A novel determination method of electroinactive molecules by means of electrochemical technique is presented. A new self-assembled monolayer containing cyclodextrin(CD) is prepared with mono(6-o-p-tolylsulfonyl)-b-cyclodextrin. Although this derivatization process leads to a b-CD coverage of 10% of a full monolayer, this layer shows an effective host-guest response to ferrocene. The interfacial ferrocene complexation gives a response similar to that expected for a Langmuir adsorption isotherm yielding a stability constant of 4.2×104 mol-1@L and a maximum ferrocene coverage of 8.6′10-12 mol/cm2. The redox peak currents of the surface-confined ferrocene de-crease upon addition of competing b-CD guest species to the solution, such as m-toluic acid(mTA) and sodium dodecyl sulfonate(SDS). This principle has been used for the determination of the electroinactive molecules, mTA and SDS in the concentration ranges of 0.8-2.7 mmol/L and 5-100 nmol/L, respectively.     

Flow injection determination of cobalt after its sorption onto polyurethane foam loaded with 2-(2-thiazolylazo)-p-cresol (TAC)

An electrochemically stable monolayer of tris(2,2'-bipyridyl)ruthenium(II) was obtained for the first time. It was based on the electrostatic attachment of Ru(bpy)(3)(2+) to the benzene sulfonic acid monolayer film, which was covalently bound onto glassy carbon electrode by the electrochemical reduction of diazobenzene sulfonic acid. The surface-confined Ru(bpy)(3)(2+) underwent reversible surface process, and reacted with the coreactant, tripropylamine, to produce electrochemiluminescence. In view of the stability of the electrode, the results strongly suggested that light was emitted from the surface-confined Ru(bpy)(3)(2+), not from the detached Ru(bpy)(3)(2+). The Ru(bpy)(3)(2+) modified electrode was used to the determination of tripropylamine. It showed good linearity in the concentration range from 5 muM to 1 mM with a detection limit of 1 muM (S/N=4). The good stability of the Ru(bpy)(3)(2+) modified electrode also showed that the benzene sulfonic acid monolayer film prepared can be served as an excellent support to construct multilayers.     

Electrochemical surface plasmon resonance investigation of dodecyl sulfate adsorption to electroactive self-assembled monolayers via ion-pairing interactions

The redox-induced assembly of amphiphilic molecules and macromolecules at electrode surfaces is a potentially attractive means of electrochemically modulating the organization of materials and nanostructures on solid substrates via ion-pairing interactions or charge-transfer complexation. In this regard, we have investigated the potential-induced adsorption and aggregation of dodecyl sulfate, a common anionic surfactant, at a ferrocenylundecanethiolate (FcC11SAu) self-assembled monolayer (SAM)/aqueous solution interface by electrochemical surface plasmon resonance (ESPR) spectroscopy. The surfactant anions adsorb onto the electroactive SAM by specific ion-pairing interactions with the oxidized ferricinium species. The ferricinium charge density (QFc+) obtained by cyclic voltammetry and surface coverage measured by SPR indicate that the dodecyl sulfate forms an interdigitated monolayer, where half of the surfactant molecules have their sulfate headgroups paired to the surface and half have their headgroups exposed to the aqueous solution. The surface coverage of dodecyl sulfate was found to depend on both the ferricinium surface concentration and the surfactant aggregation state in solution. A maximum coverage of dodecyl sulfate on the ferricinium surface is obtained below the critical micelle concentration (cmc), in contrast to dodecyl sulfate adsorption to SAM surfaces of static positive charge. This marked difference in adsorption behavior is attributed to the dynamic generation of ferricinium by potential cycling and the specific nature of the ion-pairing interactions versus pure electrostatic ones. The results presented point to a new way of organizing molecules via electrical stimulus.     

Adsorption dynamics and electrochemical and photophysical properties of thiolated ruthenium 2,2'-bipyridine monolayers

A new complex [Ru(bpy)(2)(bpySH)](PF(6))(2), RuBpySH, has been prepared bearing two anchoring groups for surface attachment, where bpy is 2,2'-bipyridyl and bpySH is 5,5'-bis(mercaptomethyl)-2,2'-bipyridine. Monolayers of RuBpySH have been formed on micro and macro platinum electrodes by spontaneous adsorption from micromolar solutions of the complex in 50:50 v/v water/acetone. The monolayers can be reversibly switched between the Ru(2+) and the Ru(3+) forms. Cyclic voltammetry is well-defined with a peak-to-peak splitting of 30 +/- 5 mV and a full width at half-maximum of 110 +/- 10 mV being observed for scan rates up to 5 V s(-1) where the supporting electrolyte is 0.1 M tetrabutylammonium tetrafluoroborate in acetonitrile. Adsorption is irreversible in this system, and the saturation coverage obtained is 8.1 +/- 0.4 x 10(-11) mol cm(-2) when the complex concentration in the deposition solution is between 10 microM and 1.0 mM. The dynamics of adsorption depend markedly on the bulk concentration and are described in terms of irreversible adsorption. Dry monolayers display luminescence properties similar to those of powder samples of the complex, indicating that the monolayer has characteristics of the solid-state sample rather than the solution sample of the complex. Significantly, efficient electrochemiluminescence is generated using tripropylamine as the coreactant. The rate of electron transfer across the electrode/monolayer interface has been probed using high scan rate cyclic voltammetry. The standard heterogeneous electron-transfer rate constant, k degrees , is 0.9 +/- 0.1 x 10(4) s(-1), and there is weak adsorbate-electrode electronic communication.     

Immobilization of liposomes onto quartz crystal microbalance to detect interaction between liposomes and proteins

To study the interaction between liposomes and proteins, intact liposomes were immobilized on a metal planar support by chemical binding and/or bioaffinity using a quartz crystal microbalance (QCM). A large decrease in the resonance frequency of quartz crystal was observed when the QCM, modified by a self-assembled monolayer (SAM) of carboxythiol, was added to liposome solutions. The stable chemical immobilization of intact liposomes onto SAM was judged according to the degree with which adsorbed mass depended on the prepared size of liposomes, as well as on the activation time of SAMs when amino-coupling was introduced, where the liposome coverage of electrodes was 69+/-8% in optimal conditions. When avidin-biotin binding was used on amino-coupling liposome layers, liposome immobilization finally reached 168% coverage of the electrode surface. Denatured protein was also successfully detected according to the change in the frequency of the liposome-immobilized QCM. The adsorbed mass of denatured carbonic anhydrase from bovine onto immobilized liposomes showed a characteristic peak at a concentration of guanidine hydrochloride that corresponded to a molten globule-like state of the protein, although the mass adsorbed onto deactivated SAM increased monotonously.     

Self-assembly of [60]fullerene-thiol derivatives on mercury surfaces

Herein we report the first self-assembly of fullerene-thiol conjugates (1 and 2) on thin mercury films (TMF) deposited on a glassy carbon electrode (GCE). The fullerene-containing SAMs were investigated by cyclic voltammetry and water contact angle measurements. Two reversible, surface-confined redox couples were obtained for the fullerene-containing SAMs on TMF/GCE in CH(2)Cl(2) solution. The surface coverage of both fullerene derivatives 1 and 2 on TMF/GCE was measured to be in the range of (1.7-1.8) x 10(-10) mol cm(-2). Both SAMs of 1 and 2 partially blocked the electron transfer across the electrode in aqueous solution. The contact angle measurements performed on TMFs clearly showed an enhancement of the surface hydrophobicity upon formation of the fullerene-containing monolayer.     

Novel kinetic and background current selectivity in the even harmonic components of fourier transformed square-wave voltammograms of surface-confined azurin

Fourier transform analysis of ramped square-wave voltammograms indicates the availability of a novel form of kinetic selectivity for surface-confined electron-transfer processes. Thus, for all the even harmonic components, quasi-reversible processes are sensitive to the surface coverage, the reversible potential, the electron-transfer rate constant (k(0')), and the electron-transfer coefficient (alpha), as well as to the amplitude (DeltaE) and frequency (f) of the square wave and dc scan rate. Additionally, it is insensitive to background capacitance current. In contrast, reversible processes and background currents are predicted to be absent from the even harmonics and only detectable in the odd harmonic components. The square-wave voltammetry of the surface-confined quasi-reversible azurin process azurin[Cu(II)] + e(-) right arrow over left arrow azurin[Cu(I)] at a paraffin-impregnated graphite electrode has been employed as a model system to test theoretical predictions. Most voltammetric characteristics of the even harmonic components obtained from the Fourier analysis are consistent with electrode kinetic values of k(0') = 90 s(-1) and alpha = 0.48, although some nonideality possibly due to kinetic dispersion also is apparent. Conditions also have been determined under which a readily generated waveform constructed from the Fourier series of sine waves produces voltammograms that are essentially indistinguishable from those predicted when an ideal square wave is employed.     

Electrochemical and surface characterization of 4-aminothiophenol adsorption at polycrystalline platinum electrodes

The formation of a self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) on polycrystalline platinum electrodes has been characterized by surface analysis and electrochemistry techniques. The 4-ATP monolayer was characterized by cyclic voltammetry (CV), linear sweep voltammetry, Raman spectroscopy, reflection-absorption infrared (RAIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). CV was used to study the dependence of the adsorption time and 4-ATP solution concentration on the relative degree of coverage of 4-ATP monolayers on polycrystalline Pt electrodes. The adsorption time range probed was 24-72 h. The optimal concentration of 4-ATP needed to obtain the highest surface at the lowest adsorption time was 10 mM. RAIR and Raman spectroscopy for 4-ATP-modified platinum electrodes showed the characteristic adsorption bands for 4-ATP, such as nuNH, nuCH(arom), and nuCS(arom), indicating the adsorption on the platinum surface. The XPS spectra for the modified Pt surface presented the binding energy peaks of sulfur and nitrogen. High energy resolution XPS studies, RAIR, and Raman spectrum for platinum electrodes modified with 4-ATP indicate that the molecules are sulfur-bonded to the platinum surface. The formation of a S-Pt bond suggests that ATP adsorption leads to an amino-terminated electrode surface. The thickness of the monolayer was evaluated via angle-resolved XPS (AR-XPS) analyses, giving a value of 8 A. As evidence of the terminal amino group on the electrode surface, the chemical derivatization of the 4-ATP SAM was done with 16-Br hexadecanoic acid. This surface reaction was followed by RAIR spectroscopy.     

Photochemically controlled electrochemical deposition and dissolution of Ag0 nanoclusters on au electrode surfaces

A photoisomerizable thiolated nitrospiropyran SP, (1a), monolayer is assembled on a Au electrode by the primary deposition of thiolated nitromerocyanine isomer 1b as a monolayer on the electrode, followed by the irradiation of the surface with visible light, lambda > 475 nm. The surface coverage of nitrospiropyran units (1a) on the electrode is 2 x 10-10 mole cm-2. Irradiation of the electrode with UV light, 320 nm < lambda < 360 nm, results in the nitromerocyanine, MR, monolayer on the electrode that binds Ag+ ions to the phenolate units. The Ag+ ions associated with the MR monolayer undergo cyclic reduction to surface-confined Ag0 nanoclusters, and reoxidation and dissolution of the Ag0 nanoclusters to Ag+ ions associated with the monolayer are demonstrated. The electron-transfer rate constants for the reduction of Ag+ to Ag0 and for the dissolution of Ag0 were determined by chronoamperometry and correspond to ketred = 12.7 s-1 and ketox = 10.5 s-1, respectively. The nanoclustering rate was characterized by surface plasmon resonance measurements, and it proceeds on a time scale of 10 min. The size of the Ag0 nanoclusters is in the range of 2 to 20 nm. The electrochemically induced reduction of the MR-Ag+ monolayer to the MR-Ag0 surface and the reoxidation of the MR-Ag0 surface control the hydrophilic-hydrophobic properties of the surface. The advancing contact angle of the MR-Ag0-functionalized surface is 59 degrees , and the contact angle of the MR-Ag+-monolayer-functionalized surface is 74 degrees . Photoisomerization of the Ag0-MR surface to the Ag0-SP state, followed by the oxidation of the Ag0 nanoclusters, results in the dissolution of the Ag+ ions into the electrolyte solution.     

Influence of Polydispersity on Adsorption of Nanoparticles

The adsorption of polydisperse, interacting nanoparticles is studied experimentally and discussed in terms of the random sequential adsorption model. Two kinds of polystyrene particles with different size variation (41+/-6 and 107+/-5 nm) were used in adsorption experiments at or close to saturation. The dried monolayer particle films were analyzed with scanning electron microscopy. Selective adsorption of smaller particles resulted in altered size distributions on the surface compared to that in solution. Varying the ionic strength was seen to influence the effective polydispersity of the particles. With increasing salt concentration there was a relative increase in the adsorption of smaller particles, resulting in a large shift toward smaller particle sizes in the size distribution on the surface. Polydispersity gave a slight increase in coverage at high salt concentrations and a decrease in the ordering of the particles on the surface. Copyright 2001 Academic Press.     

Olefin cross-metathesis of a vinyl-terminated self-assembled monolayer (SAM) on Au(111): electrochemical study using a ferrocenyl redox center

Self-assembled thiol monolayers bound to single-crystal Au(111) surfaces containing a terminal olefin have been prepared and used to monitor electrochemically the cross-metathesis (CM) between the surface and an olefin-terminated ferrocenyl (Fc) derivative from solution over time. Mixed SAM surfaces were prepared by first adsorbing a diluent for 2 days followed by the olefinic alkanethiol for known adsorption time intervals; three diluents of varying length were used. The oxidation peak areas from the voltammetry show the CM reaction yields a maximum amount of product at 100-150 min. Beyond this time, thiol desorption is apparent and the Fc oxidation peaks diminished. A kinetic simulation of the interfacial reactions involving CM and desorption reactions are described and aided in the interpretation of the voltammetric responses. The length of the diluent and the coverage of surface olefins were important factors in limiting undesirable self-CM reactions on the surface, and a model of the relationship between the diluent and surface concentration of olefin is described. This study shows that attention to monolayer formation and reaction conditions are important parameters when maximizing CM yields on surfaces.     

Heat-stabilized glycosphingolipid films for biosensing applications

We have investigated a means of producing thin, oriented lipid monolayers which are stable under repeated washing and which may be useful in biosensing or surface-coating applications. Phosphatidylcholine and the glycosphingolipid GM1 were used as representative lipids for this work. Initially, a mixed self-assembled monolayer of octanethiol and hexadecanethiol was produced on a gold surface. This hydrophobic monolayer was then brought into contact with a thin lipid film that had been assembled at the liquid/air interface of a solution, allowing the lipid to deposit on the gold surface through hydrophobic interactions. The lipid layer was then heated to cause intermingling of the fatty acid and alkanethiol chains and cooled to form a highly stable film which withstood repeated rinsing and solution exposure. Presence and stability of the film were confirmed via ellipsometry, Fourier transform infrared spectroscopy, and quartz crystal microbalance (QCM), with an average overall film thickness of approximately 3.5 nm. This method was then utilized to produce GM1 layers on gold-coated QCM crystals for affinity sensing trials with cholera toxin. For these sensing elements, the lower detection limit of cholera toxin was found to be approximately 0.5 microg/mL, with a logarithmic relationship between toxin concentration and frequency response spanning over several orders of magnitude. Potential sites for nonspecific adsorption were blocked using serum albumin without sacrificing toxin specificity.     

Mechanisms of fibrinogen adsorption at solid substrates

Adsorption of fibrinogen, modeled as a linear chain of touching beads of various sizes, was theoretically studied using the random sequential adsorption (RSA) model. The adsorption process was assumed to consist of two steps: (i) formation of an irreversibly bound fibrinogen monolayer under the side-on orientation, which is independent of the bulk protein concentration and (ii) formation of the reversibly bound, end-on monolayer, whose coverage was dependent on the bulk concentration. Calculation based on the RSA model showed that the maximum surface concentration of the end-on (reversible) monolayer equals N(⊥∞) = 6.13 × 10(3) μm(-2) which is much larger than the previously found value for the side-on (irreversible) monolayer, equal to N(∞) = 2.27 × 10(3) μm(-2). Hence, the maximum surface concentration of fibrinogen in both orientations is determined to be 8.40 × 10(3) μm(-2) corresponding to the protein coverage of 5.70 mg m(-2) assuming 20% hydration. Additionally, the surface blocking function (ASF) was determined for the end-on fibrinogen adsorption, approximated for the entire range of coverage by the interpolating polynomial. For the coverage approaching the jamming limit, the surface blocking function (ASF) was shown to vanish proportionally to (θ(⊥∞) - θ(⊥))(2). These calculation allowed one to theoretically predict adsorption isotherms for the end-on regime of fibrinogen and adsorption kinetics under various transport conditions (diffusion and convection). Using these theoretical results, a quantitative interpretation of experimental data obtained by TIRF and ellipsometry was successfully performed. The equilibrium adsorption constant for the end-on adsorption regime was found to be 8.04 × 10(-3) m. On the basis of this value, the depth of the adsorption energy minimum, equal to -17.4 kT, was predicted, which corresponds to ΔG = -41.8 kJ mol(-1). This is in accordance with adsorption energy derived as the sum of the van der Waals and electrostatic interactions. Besides having significance for predicting fibrinogen adsorption, theoretical results derived in this work also have implications for basic science providing information on mechanisms of anisotropic protein molecule adsorption on heterogeneous surfaces.     

Effect of surface charge on adsorption of bovine serum albumin 2. Interaction of protein molecules with an anionic monolayer,as studied by ellipsometry,radiotracer and surface tension measurements

The adsorption of bovine serum albumin (BSA) onto an anionic monolayer of sodium docosylsulfate (SDocS) spread at the air/water interface was studied by ellipsometry. The adsorption behavior of BSA was estimated from the observed changes in phase differences and in the ratio of reflection coefficients. The dynamic process of BSA adsorption was measured after the injection of BSA solution into the aqueous substrate of SDocS monolayer. The gentle stirring of the substrate solution for 10 min was found to be enough to make the solution homogeneous without damaging the monolayer. The adsorption characteristics of BSA onto a negatively charged surface was compared with that onto a positively charged surface previously reported.The amount of adsorption depended on time and showed a maximum with an initial rapid rise, followed by gradual decrease toward the ultimate equilibrium value. The amount and time of the maximum adsorption depended on the concentration of BSA added to the aqueous substrate.Separate radiotracer measurement, using³⁵S-labeled SDocS monolayer, which is insoluble by itself, revealed that SDocS is solubilized into the bulk solution when BSA is added to the aqueous substrate.     

Lysozyme adsorption studies at the silica/water interface using dual polarization interferometry

Lysozyme adsorption at the silica/water interface has been studied using a new analytical technique called dual polarization interferometry. This laboratory-based technique allows the build up or removal of molecular layers adsorbing or reacting on a lightly doped silicon dioxide (silica) surface to be measured in terms of thickness and refractive index changes with time. Lysozyme adsorption was studied at a range of concentrations from 0.03 to 4.0 g dm(-3) and at both pH 4 and pH 7. Adsorbed layers ranging from 14 to 43 +/- 1 A in thickness and 0.21 to 2.36 +/- 0.05 mg m(-2) in mass coverage were observed at pH 4 with increasing lysozyme concentration, indicating a strong deformation of the monolayer over the low concentration range and the formation of an almost complete sideways-on bilayer toward the high concentration of 4 g dm(-3). At pH 7, the thickness of adsorbed layers varied from 16 to 54 +/- 1 A with significantly higher surface coverage (0.74 to 3.29 +/- 0.05 mg m(-2)), again indicating structural deformation during the initial monolayer formation, followed by a gradual transition to bilayer adsorption over the high concentration end. The pH recycling performed at a fixed lysozyme concentration of 1.0 g dm(-3) indicated a broadly reversible adsorption regardless of whether the pH was cycled from pH 7 to pH 4 and back again or vice versa. These observations are in good agreement with earlier studies undertaken using neutron reflection although the fine details of molecular orientations in the layers differ subtly.     

Quartz-crystal microbalance immunosensor for Schistsoma-japonicum-infected rabbit serum.

A quartz-crystal microbalance immunosensor (QCM) has been developed for the direct determination of Schistosoma-japonicum-infected rabbit serum. A self-assembled monolayer with carboxyl groups was first coated on a gold electrode of a quartz-crystal resonator by the spontaneous adsorption of 3-mercaptopropionic acid. Schistosoma-japonicum molecular antigen of 32 kD molecular weight was then covalently attached to the crystal surface. The QCM immunosensor was used to detect infected rabbit serum (IRS49-2000); a maximum titer of 1:800 was achieved.