Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Simultaneous determination of sugars and organic acids in aged vinegars and chemometric data analysis

Aceto Balsamico Tradizionale of Modena (ABTM) is a typical product (PDO denomination) of the province of Modena produced by cooked grape must which undergoes a long ageing period (at least 12 years) in series of wooden casks (batterie). The study of the transformations of this product during ageing is extremely relevant in order to control the authenticity of ABTM towards succedaneous products and mislabelling of age.

This paper presents the results of the investigation of sugars and fixed organic acids in ABTM samples of different ages, coming from different batterie. The analytes were simultaneously determined by a gas chromatographic method optimised for this peculiar matrix.

The method shows good separation and resolution of the investigated chemical species and allows their determination in the concentration ranges reported in brackets: malic (7.6–15.5 g kg⁻¹), tartaric (4.0–9.7 g kg⁻¹), citric (0.6–1.5 g kg⁻¹) and succinic (0.36–0.62 g kg⁻¹) acid and glucose (153–294 g kg⁻¹), fructose (131–279 g kg⁻¹), xylose (011–0.39 g kg⁻¹), ribose (0.078–0.429 g kg⁻¹), rhamnose (0.061–0.195 g kg⁻¹), galactose (0.136–0.388 g kg⁻¹), mannose (0.41–1.46 g kg⁻¹), arabinose (0.33–1.00 g kg⁻¹) and sucrose (0.46–6.84 g kg⁻¹), with mean associated errors ranging from 5 to 19% depending on the analytes.

Moreover, the recovery values are always satisfactory, being close to one for most of the analytes.

Furthermore, in order to assess the degree of variability of the different analytes content with vinegar ageing and the similarity/dissimilarity among series of casks a three-way data analysis method (Tucker3) is proposed. The chemometric technique applied on the data set shows differences between the samples on the bases of their different ageing period, and between the batterie, which traditionally have an own peculiar production procedure.     

HPLC determination of Vitamin D(3) and its metabolite in human plasma with on-line sample cleanup

A HPLC method with automated column switching and UV-diode array detection is described for the simultaneous determination of Vitamin D₃ and 25-hydroxyvitamin D₃ (25-OH-D₃) in a sample of human plasma. The system uses a BioTrap precolumn for the on-line sample cleanup. A sample of 1 ml of human plasma was treated with 2 ml of a mixture of ethanol–acetonitrile (2:1 (v/v)). Following centrifugation, the supernatant was evaporated to dryness under a stream of dry and pure nitrogen. The residue was reconstituted in 250 μL of a solution of methanol 5 mmol l⁻¹ phosphate buffer, pH 6.5 (4:1 (v/v)), and a 200 μl aliquot of this solution was injected onto the BioTrap precolumn. After washing during 5 min with a mobile phase constituted by a solution of 6% acetonitrile in 5 mmol l⁻¹ phosphate buffer, pH 6.5 (extraction mobile phase), the retained analytes were then transferred to the analytical column in the backflush mode. The analytical separation was then performed by reverse-phase chromatography in the gradient elution mode with the solvents A and B (Solvent A: acetonitrile–phosphate buffer 5 mmol l⁻¹, pH 6.5; 20:80 (v/v); solvent B: methanol–acetonitrile–tetrahydrofuran, 65:20:15 (v/v)). The compounds of interest were detected at 265 nm. The method was linear in the range 3.0–32.0 ng ml⁻¹ with a limit of quantification of 3.0 ng ml⁻¹. Quantitative recoveries from spiked plasma samples were between 91.0 and 98.0%. In all cases, the coefficient of variation (CV) of the intra-day and inter-day-assay precision was ≤2.80%. The proposed method permitted the simultaneous determination of Vitamin D₃ and 25-OH-D₃ in 16 min, with an adequate precision and sensitivity. However, the overlap of the sample cleanup step with the analysis increases the sampling frequency to five samples h⁻¹. The method was successfully applied for the determination of Vitamin D₃ and 25-OH-D₃ in plasma from 46 female volunteers, ranging from 50 to 94 years old. Vitamin D₃ and 25-OH-D₃ concentrations in plasma were found from 4.30–40.70 ng ml⁻¹ (19.74 ± 9.48 ng ml⁻¹) and 3.1–36.52 ng ml⁻¹ (7.13 ± 7.80 ng ml⁻¹), respectively. These results were in good agreement with data published by other authors.     

Immobilization enzyme fluorescence capillary analysis for determination of lactic acid

A new method for the determination of lactic acid based on the immobilization enzyme fluorescence capillary analysis (IE-FCA) was proposed. Lactic dehydrogenase (LDH) was immobilized on inner surface of a capillary with glutaraldehyde, and an immobilized enzyme lactate capillary bioreactor (IE-LCBR) was formed for the determination of lactic acid. After nicotinamide adenine dinucleotide (NAD⁺) is mixed with lactic acid solution, it was sucked into the IE-LCBR and was detected at λ_ex 353 nm/λ_em 466 nm. Optimized conditions are as follows: the temperature is 38 °C; the reaction time is 15 min; the concentrations of Tris buffer (pH 8.8) and NAD⁺ are 0.1 mol L⁻¹ and 4 mmol L⁻¹, respectively; the concentration of LDH used for immobilization is 15 kU L⁻¹. The concentration of lactic acid is directly proportional to the fluorescence intensity measured from 0.50 to 2.0 mmol L⁻¹; and the analytical recovery of added lactic acid was 99–105%. The minimum detection limit of the method is 0.40 mmol L⁻¹ and sensitivity of the IE-CBR is 4.6 F mmol⁻¹ L⁻¹ lactate. Its relative standard deviation (R.S.D.) is ≤2.0%. This IE-FCA method was employed for determination of lactate in milk drink.     

Calorimetric study of inhibition of urease by 2-mercaptoethanol Procedures based upon integrated rate equations

Urease-catalyzed hydrolysis of urea was studied in the absence, and presence, of 0.3 and 0.8 mmol dm⁻³ 2-mercaptoethanol in phosphate buffer at pH 7.0 at 25°C with the use of an isoperibol calorimeter. The extent of reaction with time, ΔT vs. t, was interpreted with the help of the integrated Michaelis–Menten equation, and the inhibition constant K_i was obtained from linear transformations of the equation (Jennings–Niemann, Yun–Suelter and Booman–Niemann). The obtained value of K_i was equal to 0.87±0.10 mmol dm⁻³.     

Structure analysis and the standard molar enthalpy of formation of a coordination polymer [Co(TO)2Cl2]n (TO = 1,2,4-triazole-5-one)

A coordination polymer was synthesized by the reaction of CoCl₂ with 1,2,4-triazole-5-one (TO) and charaterized by means of IR and TG–DTG. Single-crystal structure analysis showed that the complex crystallized in the monoclinic space group C2/c: a = 23.105(9) Å, b = 3.5683(2) Å, c = 13.589(6) Å,  = 90°, β = 124.038(4)°, γ = 90°, V = 928.4(7) Å³, Z = 4. The standard molar enthalpy of formation of the complex was determined to be (−1034.28 ± 0.95) kJ mol⁻¹.     

Extraction of arsenic as the diethyl dithiophosphate complex with supercritical fluid and quantitation by cathodic stripping voltammetry

The separation of arsenic based on in situ chelation with ammonium diethyl dithiophosphate (ADDTP) has been carried out using methanol-modified supercritical CO₂. Aliquots of extract were added to an electroanalytical cell and arsenic was determined by square wave cathodic stripping voltammetry (SWCSV) at a hanging mercury drop electrode (HMDE). Quantitative extractions of As(DDTP)₃ were achieved when the experiments were carried out at a pressure of 2500 psi, a temperature of 90 °C, 2.0 mL of methanol, 20.0 min of static extraction and 5.0 min of dynamic extraction in the presence of 18 mg of ADDTP. Analysis of arsenic was made using 150 mg L⁻¹ of Cu(II) in 1 M HCl solution as supporting electrolyte in the presence of ADDTP as ligand. Preconcentration was carried out by deposition at a potential of −0.50 V and the intermetallic compound Cu_xAs_y was reduced at a potential of −0.77 to −0.82 V, depending on ligand concentration. The results showed that the presence of ligand plays an important role, increasing the method's sensitivity and preventing the oxidation of As(III). The calibration graph of the As(DDTP)₃ solution was linear from 0.8 to 12.5 μg L⁻¹ of arsenic (LOD 0.5 μg L⁻¹, R = 0.9992, t_acc = 60 s). The method was validated using carrot pulp spiked with arsenic solution. This method was applied to the determination of arsenic in samples of carrots, beets and irrigation water. Arsenic in beets was: skin 4.10 ± 0.18 mg kg⁻¹; pulp 3.83 ± 0.19 mg kg⁻¹ and juice 0.71 ± 0.09 mg L⁻¹; arsenic in carrots was: skin 2.15 ± 0.09 mg kg⁻¹; pulp 0.59 ± 0.11 mg kg⁻¹ and juice 0.71 ± 0.03 mg L⁻¹. Arsenic in water were: Chiu-Chiu 0.08 mg L⁻¹, Inacaliri 1.12 mg L⁻¹, and Salado river 0.17 ± 0.07 mg L⁻¹.     

Monoclonal antibody-based ELISA for the quantification of nitrofuran metabolite 3-amino-2-oxazolidinone in tissues using a simplified sample preparation

A sensitive and specific monoclonal ELISA for the determination of tissue bound furazolidone metabolite 3-amino-2-oxazolidinone (AOZ) is described. The procedure enables the detection of AOZ in matrix supernatant after homogenisation, protease treatment, acid hydrolysis and derivatisation of AOZ released from the tissue by o-nitrobenzaldehyde. The formed p-nitrophenyl 3-amino-2-oxazolidinone (NPAOZ) is determined by ELISA calibrated with matrix-matched standards in the concentration range of 0.05–5.0 μg I⁻¹. The assay was validated according to criteria set down by Commission Decision 2002/657/EC for the performance and validation of analytical methods for chemical residues. Detection capability, set on the basis of acceptance of no false negative results, was 0.4 μg kg⁻¹ for shrimp, poultry, beef and pork muscle. This sensitivity approaches the established confirmatory LC–MS/MS able to quantify tissue-bound AOZ at levels as low as 0.3 μg kg⁻¹. An excellent correlation of results obtained by ELISA and LC/MS–MS within the concentration range 0–32.1 μg kg⁻¹ was found in the naturally contaminated shrimp samples (r = 0.999, n = 8). A similar correlation was found for the incurred poultry samples within the concentration range of 0–10.5 μg kg⁻¹ (r = 0.99, n = 8).     

1.54 and 1.75 μm infrared luminescence of Y2O3:Er

A new 1.75 μm infrared emission transition of Y₂O₃:Er³⁺ is assigned to the ⁴S_3/2 → ⁴I_9/2 transition of Er³⁺ ions situated at the C₂ sites of cubic RE₂O₃ (RE = Y, Gd, Lu). The intensities of features in the 1.54 μm ⁴I_15/2–⁴I_13/2 absorption transition due to Er³⁺ at S₆ and C₂ sites are consistent with the site occupation ratio and the relative magnetic dipole–electric dipole intensity contributions of Er³⁺ at the different sites. The 1.54 μm emission lines are predominantly from Er³⁺ ions at C₂ sites. The different behaviours of the emission intensities 1.75 and 1.54 μm groups with change in Er³⁺ dopant ion concentration, preparation technique, Yb³⁺ co-doping, temperature change and different excitation line are rationalized.     

Determination of dioxopromethazine hydrochloride by capillary electrophoresis with electrochemiluminescence detection

The paper presents a rapid method for the determination of dioxopromethazine hydrochloride (DPZ), an antihistamine drug, by the capillary electrophoresis with electrochemiluminescene detection (CE–ECL) using tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) reagent. This CE–ECL detection method has high sensitivity, good selectivity and reproducibility for DPZ analysis. Under the optimized conditions: separation capillary, 38 cm length (25 μm i.d.); sample injection, 10 s at 8 kV; separation voltage, 12.5 kV; running buffer, 20 mmol L⁻¹ sodium phosphate of pH 6.0; detection potential, 1.15 V; 50 mmol L⁻¹ of phosphate buffer (pH 7.14) containing 5 mmol L⁻¹ of Ru(bpy)₃²⁺ in ECL detection cell, the detection limit of DPZ was 0.05 μmol L⁻¹ (S/N = 3). The linear range extended from 5 to 100 μmol L⁻¹. The linear curve obtained was Y = 181.62 + 9.28X with a correlation coefficient of 0.9970. The relative standard deviations of the ECL intensity and the migration time for six continuous injections of 5 μmol L⁻¹ DPZ were 3.7% and 0.92%, respectively. The CE–ECL method was applied to analyze DPZ in real samples including tablets, rat serum and human urine, and satisfactory results were obtained without interference from samples matrix. The CE–ECL technique was proved to be a potential method for the detection of DPZ in clinic analysis.     

Multi-elemental analysis of non-food packaging materials by inductively coupled plasma-time of flight-mass spectrometry

Commercial non-food packaging materials of four different matrices (paper, low density polyethylene (LDPE), polyethylene-polypropylene (PE-PP) and high density polyethylene (HDPE)) were examined for the content of Cr, Ni, Cu, Zn, As, Mo, Cd, Sb, Ba, Hg, Tl, Pb and U. The examined samples (0.17–0.35 g) were digested in HNO₃ and H₂O₂ (papers, LDPE and PE-PP) and in HNO₃, H₂SO₄ and H₂O₂ (HDPE) using microwave assisted high pressure system. The inductively coupled plasma-time of flight-mass spectrometry (ICP-TOFMS) has been employed as the detection technique. All measurements were carried out using internal standardization. Yttrium and rhodium (50 ng g⁻¹) were used as internal standards. The detection and quantification limits obtained were in the range of 0.005 ng g⁻¹ (⁵²Cr) to 0.51 ng g⁻¹ (⁶⁶Zn) and 0.015 μg g⁻¹ (⁵²Cr) to 2.02 μg g⁻¹ (⁶⁶Zn) of dry mass, respectively. The evaluated contents (mg kg⁻¹) of particular elements in the examined materials were as follows: 0.22–219; <1.05–9.03; 1.25–112; <2.02–449; <0.98–<1.30; <0.36–2.06; <0.29–113; <0.22–44.1; <0.06–57.4; <0.66–<0.88; <0.08–0.24; <0.13–1222 and <0.08–0.44 for Cr, Ni, Cu, Zn, As, Mo, Cd, Sb, Ba, Hg, Tl, Pb and U, respectively.     

Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry

Acrylamide levels over a wide range of different food products were analysed using both liquid chromatography–tandem mass spectrometry (HPLC–MS–MS) and gas chromatography–tandem mass spectrometry (GC–MS–MS). Two different sample preparation methods for HPLC–MS–MS analysis were developed and optimised with respect to a high sample throughput on the one hand, and a robust and reliable analysis of difficult matrices on the other hand. The first method is applicable to various foods like potato chips, French fries, cereals, bread, and roasted coffee, allowing the analysis of up to 60 samples per technician and day. The second preparation method is not as simple and fast but enables analysis of difficult matrices like cacao, soluble coffee, molasses, or malt. In addition, this method produces extracts which are also well suited for GC–MS–MS analysis. GC–MS–MS has proven to be a sensitive and selective method offering two transitions for acrylamide even at low levels up to 1 μg kg⁻¹. For the respective methods the repeatability (n=10), given as coefficient of variation, ranged from 3% (acrylamide content of 550 μg kg⁻¹) to 12% (acrylamide content of 8 μg kg⁻¹) depending on the food matrix. The repeatability (n=3) for different food samples spiked with acrylamide (5–1500 μg kg⁻¹) ranged from 1 to 20% depending on the spiking level and the food matrix. The limit of quantification (referred to a signal-to-noise ratio of 9:1) was 30 μg kg⁻¹ for HPLC–MS–MS and 5 μg kg⁻¹ for GC–MS–MS. It could be demonstrated that measurement uncertainties were not only a result of analytical variability but also of inhomogeneity and stability of the acrylamide in food.     

Determination of soluble phosphates in water samples using ytterbium(III) and dynamic measurements of light scattering intensity at long wavelength

A selective and fast method has been developed for the determination of phosphates by measuring the formation of ytterbium(III) phosphate through the variation of the light scattering intensity with time. The low solubility of this compound causes an efficient dispersion of the radiation at 490 nm, which is measured at 980 nm using the second-order grating effect. This approach minimizes potential background signals from the sample matrix. The initial rate of the system is automatically obtained in only 0.5 s by stopped-flow mixing technique. The variable optimization study has been carried out using univariate and multivariate methods. The dynamic range of the calibration graph is 0.09–7.9 mmol L⁻¹ (Pearson's correlation coefficient = 0.9999) and the detection limit is 0.03 mmol L⁻¹. The precision of the method, expressed as relative standard deviation, is 2.3%. The study of the potential interference of different inorganic anions showed that arsenate is the main interferent, although it is tolerated in a molar ratio of 5.5. The method has been satisfactorily applied to the determination of soluble phosphates in tap, ground and river water using a previous preconcentration step with a Dowex 1 (1 × 4–400) anionic resin. A 500-fold concentration has been achieved, which has allowed to decrease the detection limit up to 60 mmol L⁻¹. The recovery range is 97.5–102.5%. The results obtained are consistent with those obtained with the standard molybdenum blue method.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

Electrochemiluminescence sensor using tris(2,2′-bipyridyl)ruthenium(II) immobilized in Eastman-AQ55D–silica composite thin-films

An electrochemiluminescence (ECL) sensor with good long-term stability and fast response time has been developed. The sensor was based on the immobilization of tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) into the Eastman-AQ55D–silica composite thin films on a glassy carbon electrode. The ECL and electrochemistry of Ru(bpy)₃²⁺ immobilized in the composite thin films have been investigated, and the modified electrode was used for the ECL detection of oxalate, tripropylamine (TPA) and chlorpromazine (CPZ) in a flow injection analysis system and showed high sensitivity. Because of the strong electrostatic interaction and low hydrophobicity of Eastman-AQ55D, the sensor showed no loss of response over 2 months of dry storage. In use, the electrode showed only a 5% decrease in response over 100 potential cycles. The detection limit was 1 μmol l⁻¹ for oxalate and 0.1 μmol l⁻¹ for both TPA and CPZ (S/N=3), respectively. The linear range extended from 50 μmol l⁻¹ to 5 mmol l⁻¹ for oxalate, from 20 μmol l⁻¹ to 1 mmol l⁻¹ for TPA, and from 1 μmol l⁻¹ to 200 μmol l⁻¹ for CPZ.     

The efficacy of nitrosonaphthol functionalized XAD-16 resin for the preconcentration/sorption of Ni(II) and Cu(II) ions

Amberlite XAD-16 resin has been functionalized using nitrosonaphthol as a ligand and characterized employing elemental, thermogravimetric analysis and FT-IR spectroscopy. The sorption of Ni(II) and Cu(II) ions onto this functionalized resin is investigated and optimized with respect to the sorptive medium (pH), shaking speed and equilibration time between liquid and solid phases. The monitoring of the influence of diverse ions on the sorption of metal ions has revealed that phosphate, bicarbonate and citrate reduce the sorption up to 10–14%. The sorption data followed Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherms. The Freundlich parameters computed are 1/n = 0.56 ± 0.03 and 0.49 ± 0.05, A = 9.54 ± 1.5 and 6.0 ± 0.5 mmol g⁻¹ for Ni(II) and Cu(II) ions, respectively. D–R isotherm yields the values of X_m = 0.87 ± 0.07 and 0.35 ± 0.05 mmol g⁻¹ and of E = 9.5 ± 0.23 and 12.3 ± 0.6 kJ mol⁻¹ for Ni(II) and Cu(II) ions, respectively. Langmuir characteristic constants estimated are Q = 0.082 ± 0.005 and 0.063 ± 0.003 mmol g⁻¹, b = (4.7 ± 0.2) × 10⁴ and (7.31 ± 0.11) × 10⁴ l mol⁻¹ for Ni(II) and Cu(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantities of ΔH = −58.9 ± 0.12 and −40.38 ± 0.11 kJ mol⁻¹, ΔS = −183 ± 10 and −130 ± 8 J mol⁻¹ K⁻¹ and ΔG = −4.4 ± 0.09 and −2.06 ± 0.08 kJ mol⁻¹ at 298 K for Ni(II) and Cu(II) ions, respectively. Using kinetic equations, values of intraparticle transport and of first order rate constant have been computed for both the metal ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination in tea, vegetable oil, hydrogenated oil (ghee) and palm oil by atomic absorption spectrometry using direct and standard addition methods.     

Micellar-catalyzed alkaline hydrolysis of 2,4-dinitrochlorobenzene in a cationic gemini surfactant

Micellar-catalyzed alkaline hydrolysis of 2,4-dinitrochlorobenzene (DNCB) in the presence of a conventional cationic surfactant CTAB or a cationic gemini surfactant 1,2-ethane bis(dimethyldodecylammonium bromide) (12-2-12) were studied spectrophotometrically at 25 °C. It was found that both CTAB and 12-2-12 micelles accelerated the alkaline hydrolysis of DNCB, and the binding constant of the substrate to the micelle, K_S, for 12-2-12 (K_S = 310 M⁻¹) was larger than that for CTAB (85 M⁻¹), which suggested that DNCB molecules bound with gemini micelles more easily than with CTAB. However, the second-order rate constant in micellar pseudophase (k_M = 1.22 × 10⁻³ s⁻¹) for 12-2-12 was lower than k_M for CTAB (4.01 × 10⁻³ s⁻¹) because the substrate may enter the interior of the 12-2-12 micelles. It was found also that 12-2-12 had a similar catalysis mechanism to CTAB when the concentration of 12-2-12 was relatively low (ca. <5 mM). However, above this concentration, higher microviscosity and significant increases in aggregation number and micelle size with increased surfactant concentration may remarkably influence the hydrolysis reaction.     

Preparation of novel ion exchange polyurethane foam and its application for separation and determination of palladium in environmental samples

The new strong anion exchanger (PUFIX) from polyurethane foam was prepared by coupling of the primary amine of the foam matrix with ethyl iodide. PUFIX was characterized using different tools (IR spectra, elemental analysis, density and thermal analysis). The sorption properties of the new anion exchanger (PUFIX) and chromatographic behaviour for separation and determination of palladium(II) ions at low concentrations from aqueous iodide or thiocyanate media were investigated by a batch and dynamic processes. The maximum sorption of Pd(II) was in the pH range of 0.3–2. The kinetics of sorption of the Pd(II) by the PUFIX was found to be fast with average values of half-life of sorption (t_1/2) of 3.32 min. The variation of the sorption of Pd(II) with temperature gives average values of ΔH, ΔS, ΔG and ΔE to be −38.3 kJ mol⁻¹, −100.7 J K⁻¹ mol⁻¹, −8.3 and 11.8 kJ mol⁻¹, respectively. The sorption capacity of PUFIX was 1.69 mmol g⁻¹ for Pd(II), preconcentration factors of values ≈250 and the recovery 99–100% were achieved (R.S.D. ≈ 1.24%). The lower detection limit, 1.28 ng mL⁻¹ was evaluated using spectrophotometric method (R.S.D. ≈ 2.46%).     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.     

Silica gel ethyleneimine and its adsorption capacity for divalent Pb, Cd, and Hg

Activated silica gel was directly modified with a cyclic molecule, ethyleneimine, yielding a surface with various nitrogen basic centers, ≡Sil–O(CH₂CH₂NH)_nCH₂CH₂NH₂. Infrared spectroscopy, ¹³C NMR, thermal, and elemental analyses confirmed the covalent attachment of the organic species onto the silica matrix. The purpose of this paper is to describe the interaction involving the grafted species on silica surface with the divalent heavy cations, Pb(II), Cd(II), and Hg(II), from aqueous solutions at room temperature. The process of metal extraction was followed by the batch method and the order of the maximum extraction capacities found was: 1.27 ± 0.04, 1.02 ± 0.02, and 0.98 ± 0.01 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II) chlorides, respectively. These interactions were followed by calorimetric titration. The enthalpies of these processes are: −3.05 ± 0.02, −1.09 ± 0.01, and −9.88 ± 0.03 kJ mol⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The standard molar Gibbs free energies are in agreement with the spontaneity of the proposed reactions between cation and basic center.