Carboxylate-Free Manganese(II) Phosphonate Assemblies: Synthesis, Structure, and Magnetism

The reaction of manganese(II) salts with organophosphonic acid [t-BuPO(3)H(2) or cyclopentyl phosphonic acid (C(5)H(9)PO(3)H(2))] in the presence of ancillary nitrogen ligands [1,10-phenanthroline (phen) or 2,6-bis(pyrazol-3-yl)pyridine (dpzpy)], afforded, depending on the stoichiometry of the reactants and the reaction conditions, dinuclear, trinuclear, and tetranuclear compounds, [Mn(2)(t-BuPO(3)H)(4)(phen)(2)]·2DMF (1), [Mn(3)(C(5)H(9)PO(3))(2)(phen)(6)](ClO(4))(2)·7CH(3)OH (2), [Mn(3)(t-BuPO(3))(2)(dpzpy)(3)](ClO(4))(2)·H(2)O (3), [Mn(4)(t-BuPO(3))(2)(t-BuPO(3)H)(2)(phen)(6)(H(2)O)(2)](ClO(4))(2) (4), and [Mn(4)(C(5)H(9)PO(3))(2)(phen)(8)(H(2)O)(2)](ClO(4))(4) (5). Magnetic studies on 1, 2, and 4 reveal that the phosphonate bridges mediate weak antiferromagnetic interactions between the Mn(II) ions have also been carried out.     

Surface modification of calcium hydroxyapatite with pyrophosphoric acid

The surface of synthetic colloidal calcium hydroxyapatite (Ca(10)(PO(4))(6)(OH)(2); CaHap) was treated with pyrophosphoric acid (H(4)P(2)O(7); PP) in acetone and the materials were characterized by XRD, thermal analysis, N(2) adsorption, TEM, and FTIR. No remarkable change in XRD patterns or in particle morphology by the modification was observed. The additional amount of PO(4) of CaHap was increased with an increase in PP concentration. The Ca/P molar ratio of CaHap was decreased from 1.62 to 1.35 by the modification. IR results indicated that the PP reacts with surface P-OH groups of CaHap to form additional surface P-OH groups as follows: surface P-OH+H(4)P(2)O(7)--> surface P-O-PO(OH)(2) + H(3)PO(4). When the modified CaHap with Ca/P molar ratio less than 1.50 was treated at 850 degrees C in air, the materials transformed into beta-Ca(3)(PO(4))(2).     

Metal-controlled assembly of uranyl diphosphonates toward the design of functional uranyl nanotubules

Two uranyl nanotubules with elliptical cross sections were synthesized in high yield from complex and large oxoanions using hydrothermal reactions of uranyl salts with 1,4-benzenebisphosphonic acid or 4,4'-biphenylenbisphosphonic acid and Cs(+) or Rb(+) cations in the presence of hydrofluoric acid. Disordered Cs(+)/Rb(+) cations and solvent molecules are present within and/or between the nanotubules. Ion-exchange experiments with A(2){(UO(2))(2)F(PO(3)HC(6)H(4)C(6)H(4)PO(3)H)(PO(3)HC(6)H(4)C(6)H(4)PO(3))}·2H(2)O (A = Cs(+), Rb(+)), revealed that A(+) cations can be exchanged for Ag(+) ions. The uranyl phenyldiphosphonate nanotubules, Cs(3.62)H(0.38)[(UO(2))(4){C(6)H(4)(PO(2)OH)(2)}(3){C(6)H(4)(PO(3))(2)}F(2)]·nH(2)O, show high stability and exceptional ion-exchange properties toward monovalent cations, as demonstrated by ion-exchange studies with selected cations, Na(+), K(+), Tl(+), and Ag(+). Studies on ion-exchanged single crystal using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM/EDS) provide evidence for chemical zonation in Cs(3.62)H(0.38)[(UO(2))(4){C(6)H(4)(PO(2)OH)(2)}(3){C(6)H(4)(PO(3))(2)}F(2)]·nH(2)O, as might be expected for exchange through a diffusion mechanism.     

Periodic trends in hexanuclear actinide clusters

Four new Th(IV), U(IV), and Np(IV) hexanuclear clusters with 1,2-phenylenediphosphonate as the bridging ligand have been prepared by self-assembly at room temperature. The structures of Th(6)Tl(3)[C(6)H(4)(PO(3))(PO(3)H)](6)(NO(3))(7)(H(2)O)(6)·(NO(3))(2)·4H(2)O (Th6-3), (NH(4))(8.11)Np(12)Rb(3.89)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(24)·15H(2)O (Np6-1), (NH(4))(4)U(12)Cs(8)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(24)·18H(2)O (U6-1), and (NH(4))(4)U(12)Cs(2)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(18)·40H(2)O (U6-2) are described and compared with other clusters of containing An(IV) or Ce(IV). All of the clusters share the common formula M(6)(H(2)O)(m)[C(6)H(3)(PO(3))(PO(3)H)](6)(NO(3))(n)((6-n)) (M = Ce, Th, U, Np, Pu). The metal centers are normally nine-coordinate, with five oxygen atoms from the ligand and an additional four either occupied by NO(3)(-) or H(2)O. It was found that the Ce, U, and Pu clusters favor both C(3i) and C(i) point groups, while Th only yields in C(i), and Np only C(3i). In the C(3i) clusters, there are two NO(3)(-) anions bonded to the metal centers. In the C(i) clusters, the number of NO(3)(-) anions varies from 0 to 2. The change in the ionic radius of the actinide ions tunes the cavity size of the clusters. The thorium clusters were found to accept larger ions including Cs(+) and Tl(+), whereas with uranium and later elements, only NH(4)(+) and/or Rb(+) reside in the center of the clusters.     

Two nickel(II) carboxyphosphonates with different supramolecular structures: synthesis,crystal structures and magnetic properties

Transition Metal Chemistry - Two Ni(II) carboxyphosphonates, namely [Ni(H4L)2] (1) and [Ni(H3L)(H2O)]·2H2O (2) (H5L=HOOCC6H4CH2N(CH2PO3H2)2), have been hydrothermally synthesized. Structural...     

A new organic-inorganic hybrid layered molybdenum(V) cobalt phosphate constructed from [H24(Mo16O32)Co16(PO4)24(OH)4(C5H4N)2(H2O)6](4-) wheels and 4,4'-bipyridine linkers

A new layered molybdenum cobalt phosphate, Na(2)[Co(H(2)O)(6)][(Mo(16)O(32))Co(16)(PO(4))(4) (HPO(4))(16)(H(2)PO(4))(4)(OH)(4)(C(10)H(8)N(2))(4)(C(5)H(4)N)(2)(H(2)O)(6)]·4H(2)O (1), has been hydrothermally synthesized and structurally characterized. 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.6825(18) ?, b = 39.503(4) ?, c = 17.2763(17) ?, β = 93.791(2)°, V = 10679.4(18) ?(3), and Z = 2. A polyoxoanion of 1 exhibits an unusual organic-inorganic hybrid wheel-type cluster, in which two pyridine ligands link to the surface Co(II) atoms of a [H(24)(Mo(16)O(32))Co(16)(PO(4))(24)(OH)(4)(H(2)O)(6)] (namely, {Mo(16)Co(16)P(24)}) wheel via the Co-N bonds. Furthermore, each {Mo(16)Co(16)P(24)} wheel is connected to four adjacent wheels by four pairs of 4,4'-bipyridine linkers, forming a 2D layered network. The susceptibility measurement shows the existence of dominant antiferromagnetic interactions in 1.     

Synthesis and characterization of a new bisphosphonic acid and several metal hybrids derivatives

Commercial bis-(4-bromophenyl)-ether, [BrC(6)H(4)](2)-O, has been used to prepare 4-[4'-(diethoxyphosphoryl)phenoxy]phenyl-phosphonic acid diethyl ester, [(CH(3)CH(2))(2)O(3)P-C(6)H(4)](2)-O, (I) following a slight modification of the Michaelis-Arbuzov reaction. The acid hydrolysis of I gave 4-(4'-phosphonophenoxy)phenyl phosphonic acid, [H(2)O(3)P-C(6)H(4)](2)-O (II), and both compounds have been characterized by (1)H NMR and (13)C NMR. The crystal structure of II has been determined by single-crystal X-ray diffraction. II crystallizes in an orthorhombic unit cell, space group Pbcn, with a = 7.822(3) A, b = 5.821(2) A, c = 28.982(9) A, and V = 1319.7(7) A(3). The final R factor was R1 = 0.0614. The structure is layered, being held together through a hydrogen bonding network. II has been used as precursor in the syntheses of new metal (Mn, Fe, Co, Ni, Cu, and Zn) bisphosphonates. The syntheses were carried out using a fixed metal/bisphosphonic acid molar ratio of 2.1:1 and the influence of the pH in the reactions has been studied. Nine new compounds have been isolated: Mn(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).1.5H(2)O (III), Mn(5)(OH)(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3))(2).2H(2)O (IV), Fe(HO(3)PC(6)H(4)OC(6)H(4)PO(3)).0.5H(2)O (V), Co(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).2H(2)O (VI), Ni(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).3H(2)O (VII), Ni(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).2H(2)O (VIII), Cu(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)) (IX), Zn(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)) (X), and Zn(HO(3)PC(6)H(4)OC(6)H(4)PO(3)H) (XI). Compound IX crystallizes in an orthorhombic unit cell, space group Pbcn, and unit cell parameters a = 8.1012(5) A, b = 5.3109(3) A, c = 29.2595(5) A, and V = 1258.8(1) A(3). Its structure has been solved by ab initio powder diffraction and refined by the Rietveld method to R(F) = 0.042. IX has a pillared layer framework with highly distorted CuO(5) groups sharing edges to give isolated dimers. XI was indexed in a monoclinic unit cell, space group P112(1), with parameters a = 9.4991(9) A, b = 5.0445(5) A, c = 29.131(2) A, gamma = 91.945(7) degrees, and V = 1395.1(3) A(3). Its structure has been refined by the Rietveld method, R(F) = 0.054, since it is isostructural with the known compound, Zn[HO(3)P(C(6)H(4))(2)PO(3)H]. All solids were also characterized by thermal analysis and IR and UV-Vis spectroscopies.     

Hydrothermal synthesis and characterization of the new layered fluorogallophosphate mu-23

Mu-23, [(C(6)H(15)N(2))(C(6)H(16)N(2))Ga(5)F(6)(H(2)O)(2)(PO(4))(4)] x 4 H(2)O, the first layered fluorinated gallophosphate with a Ga/P molar ratio of 5:4, was obtained in the presence of fluoride ions with 1,4-dimethylpiperazine as an organic template. It crystallizes in the triclinic space group P1 (no. 2) with unit cell parameters a=8.735(11), b=8.864(5), c=12.636(10) A, alpha=98.36(5), beta=100.18(8), gamma=115.84(7) degrees. The layers consist of GaO(2)F(3)(H(2)O), GaO(4)F(2) octahedra, and GaO(4) and PO(4) tetrahedra; these moieties share their oxygen and some of their fluorine atoms. The connectivity scheme of these different polyhedra leads to the formation of eight-membered rings.     

(CH3)2NH(CH2)2NH(CH3)2][(UO2)2F2(HPO4)2]: a new organically templated layered uranium phosphate fluoride--synthesis, structure, characterization, and ion-exchange reactions

A new organically templated layered uranium phosphate fluoride, [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has been synthesized by hydrothermal reaction of UO(3), H(3)PO(4), HF, and (CH(3))(2)NCH(2)CH(2)N(CH(3))(2) at 140 degrees C. [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has a layered crystal structure consisting of seven-coordinated UO(5)F(2) pentagonal bipyramids and four-coordinated HPO(4) tetrahedra. Each anionic layer containing three-, four-, and six-membered rings is separated by [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations. The [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations may be readily exchanged with the M(2+) ions (M = Ba, Sr and Ca) in water to give high crystalline AE(UO(2))(2)(PO(4))(2).6H(2)O (AE = Ca, Sr, Ba).     

Excision of uranium oxide chains and ribbons in the novel one-dimensional uranyl iodates K(2)[(UO(2))3(IO(3))(4)O(2)] and Ba[(UO(2)2(IO(3))(2)O(2)](H(2)O)

The alkali metal and alkaline-earth metal uranyl iodates K(2)[(UO(2))(3)(IO(3))(4)O(2)] and Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) have been prepared from the hydrothermal reactions of KCl or BaCl(2) with UO(3) and I(2)O(5) at 425 and 180 degrees C, respectively. While K(2)[(UO(2))(3)(IO(3))(4)O(2)] can be synthesized under both mild and supercritical conditions, the yield increases from <5% to 73% as the temperature is raised from 180 to 425 degrees C. Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O), however, has only been isolated from reactions performed in the mild temperature regime. Thermal measurements (DSC) indicate that K(2)[(UO(2))(3)(IO(3))(4)O(2)] is more stable than Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) and that both compounds decompose through thermal disproportionation at 579 and 575 degrees C, respectively. The difference in the thermal behavior of these compounds provides a basis for the divergence of their preparation temperatures. The structure of K(2)[(UO(2))(3)(IO(3))(4)O(2)] is composed of [(UO(2))(3)(IO(3))(4)O(2)](2)(-) chains built from the edge-sharing UO(7) pentagonal bipyramids and UO(6) octahedra. Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) consists of one-dimensional [(UO(2))(2)(IO(3))(2)O(2)](2)(-) ribbons formed from the edge sharing of distorted UO(7) pentagonal bipyramids. In both compounds the iodate groups occur in both bridging and monodentate binding modes and further serve to terminate the edges of the uranium oxide chains. The K(+) or Ba(2+) cations separate the chains or ribbons in these compounds forming bonds with terminal oxygen atoms from the iodate ligands. Crystallographic data: K(2)[(UO(2))(3)(IO(3))(4)O(2)], triclinic, space group P_1, a = 7.0372(5) A, b = 7.7727(5) A, c = 8.9851(6) A, alpha = 93.386(1) degrees, beta = 105.668(1) degrees, gamma = 91.339(1) degrees, Z = 1; Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O), monoclinic, space group P2(1)/c, a = 8.062(4) A, b = 6.940(3) A, c = 21.67(1), beta= 98.05(1) degrees, Z = 4.     

Kinetic and mechanistic investigations of hydrothermal transformations in zinc phosphates

The room-temperature crystallization of [C(6)N(2)H(18)][Zn(HPO(4))(H(2)PO(4))(2)], an organically templated zinc phosphate containing [Zn(2)(HPO(4))(2)(H(2)PO(4))(4)](4)(-) molecular anions, and its transformation to compounds containing either one- or two-dimensional inorganic components, [C(6)N(2)H(18)][Zn(3)(H(2)O)(4)(HPO(4))(4)], [C(4)N(2)H(12)][Zn(HPO(4))(2)(H(2)O)], or [C(3)N(2)H(6)][Zn(4)(OH)(PO(4))(3)], under hydrothermal conditions were studied in-situ using energy-dispersive X-ray diffraction. The ability to collect data during reactions in a large volume ( approximately 23 mL) Teflon-lined autoclave under real laboratory conditions has allowed for the elucidation of kinetic and mechanistic information. Kinetic data have been determined by monitoring changes in the integrated peak intensities of Bragg reflections and have been modeled using the Avrami-Erofe'ev expression. The crystallization of [C(6)N(2)H(18)][Zn(HPO(4))(H(2)PO(4))(2)] is a diffusion-controlled process, while nucleation is increasingly more important in determining the overall rate of the formation of [C(6)N(2)H(18)][Zn(3)(H(2)O)(4)(HPO(4))(4)], [C(4)N(2)H(12)][Zn(HPO(4))(2)(H(2)O)], and [C(3)N(2)H(6)][Zn(4)(OH)(PO(4))(3)]. The transformation of [C(6)N(2)H(18)][Zn(HPO(4))(H(2)PO(4))(2)] to [C(4)N(2)H(12)][Zn(HPO(4))(2)(H(2)O)] and [C(3)N(2)H(6)][Zn(4)(OH)(PO(4))(3)] occurs via a dissolution-reprecipitation mechanism, while the transformation to [C(6)N(2)H(18)][Zn(3)(H(2)O)(4)(HPO(4))(4)] may be the first observation of a direct topochemical conversion of one organically templated solid to another under hydrothermal conditions.     

Syntheses, characterizations and properties of [Mo2O2S2]-based oxothiomolybdenum wheels incorporating bisphosphonate ligands

We report the syntheses and characterizations of the first polyoxothiometalate complexes isolated from the reaction of the oxothiocationic [Mo(V)(2)O(2)S(2)](2+) precursor and bisphosphonate ligands H(2)O(3)PCR(OH)PO(3)H(2) (R = C(4)H(5)N(2), zoledronic acid; R = C(3)H(6)NH(2), alendronic acid). [(Mo(2)O(2)S(2)(H(2)O))(4)(O(3)PC(O)(C(4)H(6)N(2))PO(3))(4)](8-) (Mo(8)S(8)(Zol)(4)) and [(Mo(2)O(2)S(2)(H(2)O))(4)(O(3)PC(O)(C(3)H(6)NH(3))PO(3))(4)](8-) (Mo(8)S(8)(Ale)(4)) contain four Mo(V) dimers connected via bisphosphonate ligands. These compounds offer a unique opportunity to compare the structures and properties of cyclic compounds obtained with [Mo(2)O(2)S(2)](2+) and with [Mo(2)O(4)](2+). The oxothio compounds appear less stable in solution than the oxo analogue, confirming the higher lability and versatility of [Mo(2)O(2)S(2)]-based compounds compared to [Mo(2)O(4)]-based POMs. Multinuclear and multidimensional solid-state NMR studies were carried out to complement X-ray diffraction analysis. Information on short-range interactions, dynamic behaviors, and local disorder within the crystalline materials are therefore reported. Furthermore, the electrocatalytic properties of Mo(8)S(8)(Ale)(4) and of the analogous [(Mo(2)O(4)(H(2)O))(4)(O(3)PC(O)(C(3)H(6)NH(3))PO(3))(4)](8-) (Mo(8)O(8)(Ale)(4)) immobilized onto the surface of a glassy carbon electrode were studied, thus evidencing the ability of [Mo(2)O(2)S(2)]-based cycles to promote the reduction of protons into hydrogen, whereas the oxo analogue appeared inactive.     

Synthesis, structure, magnetism and nuclease activity of tetranuclear copper(II) phosphonates containing ancillary 2,2'-bipyridine or 1,10-phenanthroline ligands

The reaction of cyclohexylphosphonic acid (C(6)H(11)PO(3)H(2)), anhydrous CuCl(2) and 2,2'-bipyridine (bpy) in the presence of triethylamine followed by a metathesis reaction with KNO(3) afforded [Cu(4)(mu-Cl)(2)(mu(3)-C(6)H(11)PO(3))(2)(bpy)(4)](NO(3))(2) (1). In an analogous reaction involving Cu(OAc)(2).H(2)O, the complex [Cu(4)(mu-CH(3)COO)(2)(mu(3)-C(6)H(11)PO(3))(2)(2,2'-bpy)(4)](CH(3)COO)(2) (2) has been isolated. The three-component reaction involving Cu(NO(3))(2).3H(2)O, cyclohexylphosphonic acid and 2,2'-bipyridine in the presence of triethylamine afforded the tetranuclear assembly [Cu(4)(mu-OH)(mu(3)-C(6)H(11)PO(3))(2)(2,2'-bpy)(4) (H(2)O)(2)](NO(3))(3) (3). Replacing 2,2'-bipyridine with 1,10-phenanthroline (phen) in the above reaction resulted in [Cu(4)(mu-OH)(mu(3)-C(6)H(11)PO(3))(2)(phen)(4)(H(2)O)(2)](NO(3))(3) (4). In all the copper(II) phosphonates (1-4) the two phosphonate ions bridge the four copper(II) ions in a capping coordination action. Each phosphonate ion bridges four copper(II) ions in a mu(4), eta(3) coordination mode or 4.211 of the Harris notation. Variable-temperature magnetic studies on reveal that all four complexes exhibit moderately strong intramolecular antiferromagnetic coupling. The DNA cleavage activity of complexes 1-4 is also described. Compounds 1 and 3 were able to completely convert the supercoiled pBR322 DNA form I to nick form II without any co-oxidant. In contrast, 50% conversion occurred with and 40% with 4. In the presence of magnesium monoperoxyphthalate all four compounds achieved rapid conversion of form I to form II.     

Syntheses, structures, and ion-exchange properties of the three-dimensional framework uranyl gallium phosphates, Cs4[(UO2)2(GaOH)2(PO4)4].H2O and Cs[UO2Ga(PO4)2

The reaction of UO(2)(NO(3))(2).6H(2)O with Cs(2)CO(3) or CsCl, H(3)PO(4), and Ga(2)O(3) under mild hydrothermal conditions results in the formation of Cs(4)[(UO(2))(2)(GaOH)(2)(PO(4))(4)].H(2)O (UGaP-1) or Cs[UO(2)Ga(PO(4))(2)] (UGaP-2). The structure of UGaP-1 was solved from a twinned crystal revealing a three-dimensional framework structure consisting of one-dimensional (1)(infinity)[Ga(OH)(PO(4))(2)](4-) chains composed of corner-sharing GaO(6) octahedra and bridging PO(4) tetrahedra that extend along the c axis. The phosphate anions bind the UO(2)(2+) cations to form UO(7) pentagonal bipyramids. The UO(7) moieties edge-share to create dimers that link the gallium phosphate substructure into a three-dimensional (3)(infinity)[(UO(2))(2)(GaOH)(2)(PO(4))(4)](4-) anionic lattice that has intersecting channels running down the b and c axes. Cs(+) cations and water molecules occupy these channels. The structure of UGaP-2 is also three-dimensional and contains one-dimensional (1)(infinity)[Ga(PO(4))(2)](3-) gallium phosphate chains that extend down the a axis. These chains are formed from fused eight-membered rings of corner-sharing GaO(4) and PO(4) tetrahedra. The chains are in turn linked together into a three-dimensional (3)(infinity)[UO(2)Ga(PO(4))(2)](1-) framework by edge-sharing UO(7) dimers as occurs in UGaP-1. There are channels that run down the a and b axes through the framework. These channels contain the Cs(+) cations. Ion-exchange studies indicate that the Cs(+) cations in UGaP-1 and UGaP-2 can be exchanged for Ca(2+) and Ba(2+). Crystallographic data: UGaP-1, monoclinic, space group P2(1)/c, a = 18.872(1), b = 9.5105(7), c = 14.007(1) A, beta = 109.65(3)(o) , Z = 4 (T = 295 K); UGaP-2, triclinic, space group P, a = 7.7765(6), b = 8.5043(7), c = 8.9115(7) A, alpha = 66.642(1)(o), beta = 70.563(1)(o), gamma = 84.003(2)(o), Z = 2 (T = 193 K).     

Organic-inorganic hybrid materials: hydrothermal syntheses and structural characterization of bimetallic organophosphonate oxides of the type Mo/Cu/O/RPO(3)(2-)/organoimine

The hydrothermal reactions of a Cu(II) starting material, a molybdate source, 2,2'-bipyridine or terpyridine, and the appropriate alkyldiphosphonate ligand yield two series of bimetallic organophosphonate hybrid materials of the general types [Cu(n)(bpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)] and [Cu(n)(terpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)]. The bipyridyl series includes the one-dimensional materials [Cu(bpy)(MoO(2))(H(2)O)(O(3)PCH(2)PO(3))] (1) and [[Cu(bpy)(2)][Cu(bpy)(H(2)O)](Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)CH(2)PO(3))].H(2)O (5.H(2)O) and the two-dimensional hybrids [Cu(bpy)(Mo(2)O(5))(H(2)O)(O(3)PCH(2)PO(3))].H(2)O (2.H(2)O), [[Cu(bpy)](2)(Mo(4)O(12))(H(2)O)(2)(O(3)PCH(2)CH(2)PO(3))].2H(2)O (3.2H(2)O), and [Cu(bpy)(Mo(2)O(5))(O(3)PCH(2)CH(2)CH(2)PO(3))](4). The terpyridyl series is represented by the one-dimensional [[Cu(terpy)(H(2)O)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)PO(3))].3H(2)O (7.3H(2)O) and the two-dimensional composite materials [Cu(terpy)(Mo(2)O(5))(O(3)PCH(2)PO(3))] (6) and [[Cu(terpy)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)PO(3))] (8). The structures exhibit a variety of molybdate building blocks including isolated [MoO(6)] octahedra in 1, binuclear subunits in 2, 4, and 6, tetranuclear embedded clusters in 3, and the prototypical [Mo(5)O(15)(O(3)PR)(2)](4-) cluster type in 5, 7, and 8. These latter materials exemplify the building block approach to the preparation of extended structures.     

Solid state coordination chemistry: one-, two-, and three-dimensional materials constructed from molybdophosphonate subunits linked through binuclear copper tetra-2-pyridylpyrazine groups

The hydrothermal reactions of MoO(3), an appropriate Cu(II) source, tetra-2-pyridylpyrazine (tpypyz), and phosphoric acid and/or an organophosphonate yielded a series of organic-inorganic hybrid materials of the copper-molybdophosphonate family. A common feature of the structures is the entrainment within the extended architectures of chemically robust [Mo(5)O(15)(O(3)PR)(2)](4)(-) clusters as molecular building blocks. The cluster is a characteristic feature of the one-dimensional materials [[Cu(2)(tpypyz)(H(2)O)(3)]Mo(5)O(15)(HPO(4))(O(3)PCH(2)CO(2)H)].H(2)O (1.H(2)O) and [[Cu(2)(tpypyz)(H(2)O)]Mo(5)O(15)(O(3)PC(6)H(5))(2)].2H(2)O (2.2H(2)O), the two-dimensional network [[Cu(2)(tpypyz)(H(2)O)(3)]Mo(5)O(15)(HPO(4))(2)].2H(2)O (5.2H(2)O) and the three-dimensional frameworks [[Cu(2)(tpypyz)(H(2)O)(2)]Mo(5)O(15)[O(3)P(CH(2))(n)()PO(3)]].xH(2)O [n = 3, x = 2.25 (6.2.25H(2)O); n = 4, x = 0.33 (7.0.33H(2)O)]. In the case of methylenediphosphonate as the phosphorus component, the unique chelating nature of the ligand precludes formation of the pentamolybdate core, resulting in the chain structures [[Cu(2)(tpypyz)(H(2)O)]Mo(3)O(8) (HO(3)PCH(2)PO(3))(2)].8H(2)O (3.8H(2)O) and [[Cu(2)(tpypyz)(H(2)O)](2)(Mo(3)O(8))(2)(O(3)PCH(2)PO(3))(3)].16.9H(2)O (4.16.9H(2)O). For structures 1-7, the secondary metal-ligand building block is the binuclear [Cu(2)(tpypyz)(H(2)O)(x)](4+) cluster. There is considerable structural versatility as a result of the variability in the number of attachment sites at the phosphomolybdate clusters, the coordination geometry of the Cu(II), which may be four-, five-, or six-coordinate, the extent of aqua ligation, and the participation of phosphate oxygen atoms as well as molybdate oxo groups in bonding to the copper sites. Crystal data: 1.H(2)O, C(26)H(28)N(6)Cu(2)Mo(5)O(28)P(2), monoclinic C2/c, a = 42.497(2) A, b = 10.7421(4) A, c = 20.5617(8) A, beta = 117.178(1) degrees, V = 8350.1(5) A(3), Z = 8; 2.2H(2)O, C(36)H(32)N(6)Cu(2)Mo(5)O(24)P(2), monoclinic P2(1)/c, a = 11.2478(7) A, b = 19.513(1) A, c = 21.063(1) A, beta = 93.608(1) degrees, V = 4613.7(5) A(3), Z = 4; 3.8H(2)O, C(26)H(40)N(6)Cu(2)Mo(3)O(29)P(4), monoclinic C2/c, a = 32.580(2) A, b = 17.8676(9) A, c = 15.9612(8) A, beta = 104.430(1) degrees, V = 8993.3(8) A(3), Z = 8; 4.16.9H(2)O, C(51)H(71.75)Cu(4)Mo(6)N(12)O(51)P(6), monoclinic P2(1)/c, a = 27.929(3) A, b = 12.892(2) A, c = 22.763(3) A, beta = 90.367(2) degrees, V = 8195.7(2) A(3), Z = 4;( )()5.2H(2)O, C(24)H(28)N(6)Cu(2)Mo(5)O(28)P(2), monoclinic P2(1)/n, a = 11.3222(4) A, b = 18.7673(7) A, c = 19.4124(7) A, beta = 98.819(1) degrees, V = 4076.1(3) A(3), Z = 4; 6.2.25H(2)O, C(27)H(28.5)N(6)Cu(2)Mo(5)O(24.25)P(2), monoclinic C2/c, a = 12.8366(5) A, b = 18.4221(8) A, c = 34.326(1) A, beta = 100.546(1) degrees, V = 7980.1(6) A(3), Z = 8; 7.(1)/(3)H(2)O, C(28)H(28.7)N(6)Cu(2)Mo(5)O(23.3)P(2), monoclinic C2/c, a = 12.577(1) A, b = 18.336(1) A, c = 36.476(3) A, beta = 91.929(2) degrees, V = 8407.3 A(3), Z = 8.     

Pentasubstituted ferrocene and dirhodium(II) tetracarboxylate as building blocks for discrete fullerene-like and extended supramolecular structures

The synthesis of a penta(1-methylpyrazole)ferrocenyl phosphine oxide ligand (1) [Fe(C(5)(C(3)H(2)N(2)CH(3))(5))(C(5)H(4)PO(t-C(4)H(9))(2))] is reported together with its X-ray crystal structure. Its self-assembly behavior with a dirhodium(II) tetraoctanoate linker (2) [Rh(2)(O(2)CC(7)H(15))(4)] was investigated for construction of fullerene-like assemblies of composition [(ligand)(12)(linker)(30)]. Reaction between 1 and 2 in acetonitrile resulted in the formation of a light purple precipitate (3). Evidence for the ligand-to-linker ratio of 1:2.5 expected for a fullerene-like structure [Fe(C(5)(C(3)H(2)N(2)CH(3))(5))(C(5)H(4)PO(t-C(4)H(9))(2))](12)[Rh(2)(O(2)CC(7)H(15))(4)](30) was obtained from (1)H NMR and elemental analysis. IR and Raman studies confirmed the diaxially bound coordination environment of the dirhodium linker by comparing the stretching frequencies of the carboxylate group and the rhodium-rhodium bond with those in model compound (5), [Rh(2)(O(2)CC(7)H(15))(4)](C(3)H(3)N(2)CH(3))(2), the bis-adduct of linker 2 with 1-methylpyrazole. X-ray powder diffraction and molecular modeling studies provide additional support for the formation of a spherical molecule topologically identical to fullerene with a diameter of approximately 38 ? and a molecular formula of [(1)(12)(2)(30)]. Dissolution of 3 in tetrahydrofuran (THF) followed by layering with acetonitrile afforded purple crystals of [(1)(2)(2)](∞) (6) [Fe(C(5)(C(3)H(2)N(2)CH(3))(5))(C(5)H(4)PO(t-C(4)H(9))(2))][Rh(2)(O(2)CC(7)H(15))(4)](2) with a two-dimensional polymeric structure determined by X-ray crystallography. The dirhodium linkers link ferrocenyl units by coordination to the pyrazoles but only four of the five pyrazole moieties of the pentapyrazole ligand are coordinated. The ligand-to-linker ratio of 1:2 in 6 was confirmed by (1)H NMR spectroscopy and elemental analysis, while results from IR and Raman are in agreement with the diaxially coordinated environment of the linker observed in the solid state.     

Salen-type compounds of calcium and strontium

Salen complexes of the heavy alkaline-earth metals, calcium and strontium, were prepared by the reaction of various salen(t-Bu)H(2) ligands with the metals in ethanol. Six new calcium and strontium compounds, [Ca(salen(t-Bu))(HOEt)(2)(thf)] (1), [Ca(salen(t-Bu))(HOEt)(2)] (2), [Ca(salpen(t-Bu))(HOEt)(3)] (3), [Ca(salophen(t-Bu))(HOEt)(thf)] (4), [Sr(salen(t-Bu))(HOEt)(3)] (5), and [Sr(salophen(t-Bu))(HOEt)(thf)(2)] (6), were formed in this way with the quatridentate Schiff-base ligands N,N'-bis(3,5-di-tert-butylsalicylidene)ethylenediamine (salen(t-Bu)H(2)), N,N'-bis(3,5-di-tert-butylsalicylidene)-1,3-propanediamine (salpen(t-Bu)H(2)), and N,N'-o-phenylenebis(3,5-di-tert-butylsalicylideneimine (salophen(t-Bu)H(2)). Initially, ammonia solutions of the metals were combined with the salen(t-Bu)H(2) ligands, and in the reaction of strontium with salen(t-Bu)H(2), the unusual tetrametallic cluster [(OC(6)H(2)(t-Bu)(2)CHN(CH(2))(2)NH(2))Sr(mu(3)-salean(t-Bu)H(2))Sr(mu(3)-OH)](2) (7) was produced (salean(t-Bu)H(4) = N,N'-bis(3,5-di-tert-butyl-2-hydroxybenzyl)ethylenediamine). In this compound, the imine bonds of the salen(t-Bu)H(2) ligand were reduced to form the known ligands salean(t-Bu)H(4) and (HO)C(6)H(2)(t-Bu)(2)CHN(CH(2))(2)NH(2). Compounds 1, 5, 6, and 7 were structurally characterized by single-crystal X-ray diffraction. Crystal data for 1 (C(44)H(74)CaN(2)O(6)): triclinic space group P(-)1, a = 8.3730(10) A, b = 14.8010(10) A, c = 18.756(2) A, alpha = 72.551(10) degrees, beta = 81.795(10) degrees, gamma = 78.031(10) degrees, Z = 2. Crystal data for 5 (C(38)H(64)SrN(2)O(5)): monoclinic space group P2(1)/c, a = 23.634(3) A, b = 8.4660(10) A, c = 24.451(3) A, beta = 101.138(10) degrees, Z = 4. Crystal data for 6 (C(46)H(67)N(2)O(5)Sr): orthorhombic space group P2(1)2(1)2(1), a = 10.5590(2) A, b = 16.2070(3) A, c = 26.7620(6) A, Z = 4. Crystal data for 7 (C(98)H(156)N(8)O(8)Sr(4)): triclinic space group P(-)1, a = 14.667(1) A, b = 15.670(1) A, c = 18.594(2) A, alpha = 92.26(1) degrees, beta = 111.84(1) degrees, gamma = 117.12(1) degrees, Z = 4.     

Solid-state coordination chemistry of the oxomolybdate-organodiphosphonate/nickel-organoimine system: structural influences of the secondary metal coordination cation and diphosphonate tether lengths

The hydrothermal reactions of a molybdate source, a nickel(II) salt, tetra-2-pyridylpyrazine (tpyprz), and organodiphosphonic acids H(2)O(3)P(CH(2))(n)()PO(3)H(2) (n = 1-5) of varying tether lengths yielded a series of organic-inorganic hybrid materials of the nickel-molybdophosphonate family. A persistent characteristic of the structural chemistry is the presence of the [Mo(5)O(15)(O(3)PR)(2)](4)(-) cluster as a molecular building block, as noted for the one-dimensional materials [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(4)PO(3)]]x6.65H(2)O (6x6.65H(2)O) and [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(5)PO(3)]]x3.75H(2)O (8x3.75H(2)O), the two-dimensional phases [[Ni(4)(tpyprz)(3)][Mo(5)O(15)(O(3)PCH(2)CH(2)PO(3))](2)]x23H(2)O (3x23H(2)O) and [[Ni(3)(tpyprz)(2)(H(2)O)(2)](Mo(5)O(15))(Mo(2)O(4)F(2))[O(3)P(CH(2))(3)PO(3)](2)]x8H(2)O (5x8H(2)O), and the three-dimensional structures [[Ni(2)(tpyprz)(H(2)O)(3)]Mo(5)O(15)[O(3)P(CH(2))(3)PO(3))]]xH(2)O (4xH(2)O) and [[Ni(2)(tpyprz)(H(2)O)(2)]Mo(5)O(15) [O(3)P(CH(2))(4)PO(3)]]x2.25H(2)O (7x2.25H(2)O). In the case of methylenediphosphonic acid, the inability of this ligand to tether adjacent pentanuclear clusters precludes the formation of the common molybdophosphonate building block, manifesting in contrast a second structural motif, the trinuclear [(Mo(3)O(8))(x)(O(3)PCH(2)PO(3))(y)] subunit of [[Ni(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2) (O(3)PCH(2)PO(3))(2)] (1) which had been previously observed in the corresponding methylenediphosphonate phases of the copper-molybdophosphonate family. Methylenediphosphonic acid also provides a second phase, [Ni(2)(tpyprz)(2)][Mo(7)O(21)(O(3)PCH(2)PO(3))]x3.5H(2)O (9x5H(2)O), which contains a new heptamolybdate cluster [Mo(7)O(21)(O(3)PCH(2)PO(3))](4)(-) and a cationic linear chain [Ni(tpyprz)](n)(4n+) substructure. The structural chemistry of the nickel-molybdophosphonate series contrasts with that of the corresponding copper-molybdophosphonate materials, reflecting in general the different coordination preferences of Ni(II) and Cu(II). Consequently, while the Cu(II)-organic complex building block of the copper family is invariably the binuclear [Cu(2)(tpyprz)](4+) subunit, the Ni(II) chemistry with tpyprz exhibits a distinct tendency toward catenation to provide [Ni(3)(tpyprz)(2)](6+), [Ni(4)(tpyprz)(3)](8+), and [Ni(tpyprz)](n)(4n+) building blocks as well as the common [Ni(2)(tpyprz)](4+) moiety. This results in a distinct structural chemistry for the nickel(II)-molybdophosphonate series with the exception of the methylenediphosphonate derivative 1 which is isostructural with the corresponding copper compound [[Cu(2)(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2)(O(3)PCH(2)PO(3))] (2). The structural chemistry of the nickel(II) series also reflects variability in the number of attachment sites at the molybdophosphonate clusters, in the extent of aqua ligation to the Ni(II) tpyprz subunit, and in the participation of phosphate oxygen atoms as well as molybdate oxo groups in linking to the nickel sites.     

New dinuclear catalysts Rh(2)(N-O)(2)[(C6H4)P(C6H5)2]2 with imidate ligands: synthesis and isomerization from head-to-tail to head-to-head configuration of the imidate ligands

Two new dirhodium(II) catalysts of general formula Rh(2)(N-O)(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (N-O = C(4)H(4)NO(2)) are prepared, starting from Rh(2)(O(2)CCH(3))(2)(PC)(2)L(2) [PC = (C(6)H(4))P(C(6)H(5))(2) (head-to-tail arrangement); L = HO(2)CCH(3)]. The thermal reaction of Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) with the neutral succinimide stereoselectively gives one compound that according to the X-ray structure determination has the formula Rh(2)(C(4)H(4)NO(2))(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (1). It corresponds to the polar isomer with two bridging imidate ligands in a head-to-head configuration. However, stepwise reaction of Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) with (CH(3))(3)SiCl and potassium succinimidate yields a mixture of 1 and one of the two possible isomers (structure B) with a head-to-tail configuration of the imidate ligands, Rh(2)(C(4)H(4)NO(2))(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (2), also characterized by X-ray methods. In solution, compound 2 undergoes slow isomerization to 1; the rate of this process is enhanced by the presence of acetonitrile. Compounds 1 and 2 are obtained as pure enantiomers starting from (M)- and (P)-Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) rather than from the racemic mixture. Their enantioselectivities in cyclopropanation of 1-diazo-5-penten-2-one are similar to those reported for the dirhodium amidate catalysts.