Effect of Pt,Pd, and Cs<Superscript>+</Superscript> Additives on the Surface State and Catalytic Activity of WO<Subscript>3</Subscript> in Oxidation of Hydrogen

We have shown that additions of Pt(Pd) and Cs⁺ to WO₃ significantly increase its specific surface area and catalytic activity in H₂ oxidation. After reduction, the promoted specimens contain the phases WO₃, WO_2.9, H_xWO₃; and in the case of Cs⁺ additions, Cs_xWO₃. According to X-ray photoelectron spectroscopy (XPS), the Pt and Pd have an oxidation state close to 0, while tungsten has a +5 oxidation state. The W:O ratio indicates the content of oxygen vacancies in the surface layer. The data are explained taking into account hydrogen spillover from Pt(Pd) to the support.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 126–129, March– April, 2005.     

Solvent extraction of radioactive Cs<Superscript>+</Superscript> by hydroborate anionic extractants of the [1-LB<Subscript>10</Subscript>H<Subscript>9</Subscript>]<Superscript>-</Superscript> type (L = amine or phosphine)

Summary New anion derivatives of the closo-decaborate [B₁₀H₁₀]^2- bearing amine or phosphine groups were tested for the extraction of radioactive cesium cations in acidic medium. The technique used is the liquid-liquid extraction based on the complexation of Cs⁺ by these anions to form neutral compounds which are extracted by organic solvents (diluents) of medium polarity. Promising results were obtained with the anion [1-(C₆H₅CH₂)₂(C₆H₅)NB₁₀H₉]^- (3) soluble in many organic solvents. The most efficient diluent for the extraction is nitrobenzene. Using hydrochloric acid or sulfuric acid in the aqueous medium instead of nitric acid does not significantly affect the efficiency of Cs⁺ extraction.     

Hexametavanadates M<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>M<Superscript>2+</Superscript>(VO<Subscript>3</Subscript>)<Subscript>6</Subscript>: Thermal stability and luminescent characteristics

Rhombohedral hexametavanadates K₄Sr(VO₃)₆, K₄Ba(VO₃)₆, Rb₄ Ba(VO₃)₆, and Cs₄Ba(VO₃)₆ melt incongruently in the temperature range of 491 to 600°C. Cooling of peritectic melts yields mixtures of compounds typical of M₂⁺O-M²⁺O-V₂O₅ systems, far from equilibrium and depending on the cooling kinetics. The vanadate Cs₄Ba(VO₃)₆ undergoes reversible polymorphic transformation at 360°C. All compounds show broad-band luminescence with a maximum of the luminescence spectrum at 490–590 nm with three types of excitation. The vanadates K₄Sr(VO₃)₆ and Rb₄Ba(VO₃)₆ show the highest luminescence intensity at room temperature. The latter is also most efficient at liquid nitrogen temperatures. The luminescence spectra depend on the excitation of vanadates. Three hypotheses were put forward to interpret this finding. The nature of luminescence is attributed to the relaxation of electronic excitation in [VO₄]³⁻ structural tetrahedra present in the vanadates. The performance characteristics of luminophores were determined. These luminophores may be promising as X-ray luminescent screens, radioluminescence indicators, and light-emitting diode devices.     

An XPS Study of the Promotion of Ru-Cs/Sibunit Catalysts for Ammonia Synthesis

The nature of surface cesium compounds in cesium-modified ruthenium-Sibunit catalysts for ammonia synthesis was studied by X-ray photoelectron spectroscopy (XPS). It was found that, on the reduction of promoted catalysts, cesium was incorporated into the micropores of Sibunit to form quasi-intercalation cesium-carbon bonds. In this case, the chemical state of cesium was close to its state in cesium suboxides. The subsequent interaction with atmospheric oxygen resulted in the oxidation of cesium, which occurred as cesium peroxide and cesium superoxide in the oxidized samples. Ruthenium occurred in a metallic state in the reduced samples. The activity of a Ru-Cs⁺/C(1) sample was higher than that of inactive Ru-Cs⁺/C(2). This is a consequence of the higher surface concentration of ruthenium, which is most likely due to an increase in the dispersity of metal particles, as well as of the higher probability of the interaction between the promoter and the active component due to a symbatic increase in the surface concentrations of both ruthenium and cesium.__________Translated from Kinetika i Kataliz, Vol. 46, No. 4, 2005, pp. 635–641.Original Russian Text Copyright © 2005 by Larichev, Prosvirin, Shlyapin, Shitova, Tsyrul’nikov, Bukhtiyarov.     

Hydration of the H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, and Cs<Superscript>+</Superscript> ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes modified with inorganic dopants

The hydration, state, and mobility of protons and Li⁺, Na⁺, and Cs⁺ ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes doped with silicon dioxide and phosphotungstic acid have been investigated by NMR and impedance spectroscopy. The dopants increase the moisture content of the membrane and change the system of pores and channels in which ion transport takes place. At low humidities, the dopant particles are involved in ion transport. The greatest effect is observed for the membranes doped with both SiO₂ and phosphotungstic acid. The water molecules sorbed by dopant particles as a material participate in the hydration of alkali metal cations in the membrane.     

Layered LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> as cathode material for hybrid Li<Superscript>+</Superscript>/Na<Superscript>+</Superscript> batteries

LiNi_0.80Co_0.15Al_0.05O₂ (NCA) is explored to be applied in a hybrid Li⁺/Na⁺ battery for the first time. The cell is constructed with NCA as the positive electrode, sodium metal as the negative electrode, and 1 M NaClO₄ solution as the electrolyte. It is found that during electrochemical cycling both Na⁺ and Li⁺ ions are reversibly intercalated into/de-intercalated from NCA crystal lattice. The detailed electrochemical process is systematically investigated by inductively coupled plasma-optical emission spectrometry, ex situ X-ray diffraction, scanning electron microscopy, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The NCA cathode can deliver initially a high capacity up to 174 mAh g^?1 and 95% coulombic efficiency under 0.1 C (1 C?=?120 mA g^?1) current rate between 1.5–4.1 V. It also shows excellent rate capability that reaches 92 mAh g^?1 at 10 C. Furthermore, this hybrid battery displays superior long-term cycle life with a capacity retention of 81% after 300 cycles in the voltage range from 2.0 to 4.0 V, offering a promising application in energy storage.     

Structures of the nearest surroundings of the K<Superscript>+</Superscript>, Rb<Superscript>+</Superscript>, and Cs<Superscript>+</Superscript> ions in aqueous solutions of their salts

Published data on structural characteristics of hydration of K⁺, Rb⁺, and Cs⁺ ions in aqueous solutions of their salts under standard conditions, including authors’ X-ray diffraction data, are summarized and correlated. The structural parameters of the nearest surrounding of the K⁺, Rb⁺, and Cs⁺ ions, such as the coordination numbers, interparticle distances, and types of ionic association, are discussed. It is noted that, because of weak tendency of these cations to hydration, the parameters of their coordination spheres strongly depend on the concentration and chemical nature of counterions.     

Functionalization of one or two methyl groups in the [Cp*<Subscript>2</Subscript>RuBr]<Superscript>+</Superscript>Br<Superscript>−</Superscript> complex in the reaction with bromine

The reaction of [Cp*₂RuBr]⁺Br⁻ with bromine in CH₂Cl₂ (CD₂Cl₂) in an inert atmosphere at room temperature produces the complexes [Cp*Ru(Br)C₅Me₄CH₂Br]⁺Br₃ ⁻ (syn conformer), [Cp*Ru(Br)C₅Me₃(CH₂Br)₂]⁺ (syn and anti conformers), and [Ru(Br)(C₅Me₄CH₂Br)₂]⁺ (syn conformer). All complexes were characterized by ¹H and ¹³C NMR spectroscopy; the former complex, by elemental analysis. These complexes were also prepared by the reaction of [Cp*RuC₅Me₄CH₂]⁺BF₄ ⁻ with bromine in CH₂Cl₂. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2712–2718, December, 2005.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

A simple synthesis of magnetic ammonium 12-molybdophosphate/graphene oxide nanocomposites for rapid separation of Cs<Superscript>+</Superscript> from water

A new nanoadsorbent A/Fe₃O₄/GO (AFG) is developed for eliminating Cs⁺ from water by anchoring Fe₃O₄ nanoparticles onto graphene oxide (GO/Fe₃O₄) and in situ controllable growing nanocrystal of ammonium 12-molybdophosphate (A) on the surface of GO/Fe₃O₄ with a simple procedure at room temperature. AFG shows a high adsorption capacity for Cs⁺ (Q_max?=?82.71 mg g^?1) and fast kinetics (>?88.83% elimination efficiency within only 1 min and reaches the end equilibrium in about 10 min). It presents good selectivity for Cs⁺ in a wide pH range (2.0–10). Furthermore, it can be recovered from water with easily magnetic separation.     

Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, TiO<Subscript>2</Subscript> and ZrO<Subscript>2</Subscript>

Copper or iron supported on commercially available oxides, such as γ-Al₂O₃, TiO₂ (anatase) and monoclinic tetragonal ZrO₂ (mt-ZrO₂) were tested as catalysts for selective catalytic oxidation of ammonia into nitrogen and water vapour (NH₃-SCO) in the low temperature range. Different commercial oxides were used in this study to determine the influence of the specific surface area, acidic nature of the support and crystalline phases as well as of the type of species and aggregation state of transition metals on the catalytic performance in selective ammonia oxidation. Copper modified oxide supports were found to be more active and selective to nitrogen than catalysts impregnated with iron. Activities of both transition metal modified samples decreased in the following order: mt-ZrO₂, TiO₂ (anatase), γ-Al₂O₃. Quantitative total ammonia conversion was achieved with the Cu/ZrO₂ catalytic system at 400°C. Characterisation techniques, e.g. H₂-temperature programmed reduction, UV-VIS-diffuse reflectance spectroscopy, suggest that easily reducible copper oxide species are important in achieving high catalytic performances at low temperatures.     

Catalytic properties of Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in the aqueous-phase reforming of ethylene glycol: Effect of the alumina support

The influence of the alumina support on the catalytic activity of Pt/Al₂O₃ catalysts in aqueous phase reforming of ethylene glycol to hydrogen was studied. The catalysts were prepared by impregnation of γ-, δ-, and α-alumina with H₂PtCl₆. The highest rate of hydrogen production (452 μmol min⁻¹ g⁻¹) obtained with the Pt/α-Al₂O₃ catalyst can be related to the highest extent of dispersion of Pt on α-Al₂O₃. XPS, TEM-EDX and TPR-H₂ measurements showed the absence of chloride-containing surface complexes in the Pt/α-Al₂O₃ catalyst. However, chloride-containing entities were found on the surface of Pt/γ-Al₂O₃ and Pr/δ-Al₂O₃ catalysts. When chloride ions are removed chlorinated Pt species facilitate the sintering of Pt crystallites and in this way affect the extent of Pt dispersion. Moreover, depending upon the particular crystalline form, alumina atoms have different coordination and alumina surfaces contain varying amounts of OH groups of different nature which affect the interaction between Pt and the support.     

Photocatalysis enhancement of CaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Nd<Superscript>3+</Superscript>@TiO<Subscript>2</Subscript> composite powders

CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were synthesized by a sol–gel method under mild conditions (i.e. low temperature and ambient pressure). The as-prepared powders were characterized by transmission electron microscopy (TEM) and analyzed by X-ray diffraction (XRD). The photocatalytic behavior of the TiO₂-base surfaces was evaluated by the degradation of nitrogen monoxide gas. It suggested that CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were composed of anatase titania and that CaAl₂O₄:Eu²⁺, Nd³⁺. TiO₂ particles were deposited on the surface of CaAl₂O₄:Eu²⁺, Nd³⁺ to form uniform film. CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders exhibited higher photocatalytic activity compared with pure TiO₂ under visible light. And the result also clearly indicated that the long afterglow phosphor absorbed and stored lights for the TiO₂ to remain photocatalytic activity in the dark.     

Kinetic aspects of the ion-exchange reactions of Cs<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, Sr<Superscript>2+</Superscript>and Eu<Superscript>2+</Superscript> ions on the H<Superscript>+</Superscript> form of chromium hexacyanoferrate(II)

Summary This paper reports the radiochemical study of the ion-exchange of Cs⁺, Na⁺, Sr²⁺ and Eu³⁺ ions with H⁺ by chromium hexacyanoferrate(II) which was prepared in a granular form using a gel method. The slow steps which determine the rate of exchange of these ions are directly proportional to the particle diameter and this is confirmed from the linearity test of Bt vs. t plots at different particle diameters. Boyed’s equation and Reichenberg’s tables were used for evaluating all the kinetic parameters. The results reveal that the effective particle radii are unchanged for both chromium hexacyanoferrate(II) dried at 60 and 120 °C. The obtained data were analyzed using McKay plots and Arrhenius equation and the kinetic and thermodynamic parameters, e.g., effective diffusion coefficient, activation energies and entropies of activation have been evaluated. The mobility of these ions inside the particles of chromium hexacyanoferrate(II) decrease in the order of Eu³⁺>Sr²⁺>Na⁺⊃Cs⁺.     

Factors affecting the sorption behavior of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> using biosorbent material

In this study, saw dust has been used as precursor for production of low cost activated carbon using potassium hydroxide (KOH) and steam activation technique. The activated carbon was used to remove Cs⁺ and Sr²⁺ ions from aqueous solutions by batch operation, and the extent of adsorption was investigated as a function of solution pH, temperature, shaking time, and initial concentration. The influence of interfering ions was also investigated. The removal of metal ions was pH dependent and the adsorption capacity reaches its maximum 43% and 61.5% at pH 5.0 and 6.0 for Cs⁺ and Sr²⁺ ions, respectively. Thermodynamic studies showed different behaviours where an endothermic, non-spontaneous process was shown for Cs⁺ while an exothermic, spontaneous process was obtained for Sr²⁺. The kinetic data of both ions was described well by pseudo-second order rate equation. The two equilibrium models (Langmuir and Freundlich) have been also applied. Desorption studies indicated that HCl was the most effective desorbing eluent. The investigated adsorbent showed good results towards cesium and strontium removal from aqueous media that could be a promising method due to its low-cost and good efficiency.     

Oxidative dehydrogenation of propane on the VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/CeZrO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> supported catalyst

The oxidative dehydrogenation of propane on a supported vanadium catalyst was studied (the support was a complex oxide system consisting of a ceria–zirconia solid solution deposited on γ-Al₂O₃ (CeZrO/γ-Al₂O₃)). A comparative analysis of the properties of the support and the catalyst prepared on its basis was performed. The support and catalyst were characterized by the BET method, scanning electron microscopy, X-ray diffraction analysis, and Raman spectroscopy. The catalytic properties of the catalyst and support were studied in propane oxidation at 450 and 500°C with pulse feeding of the reagent. The effect of propane on the support was found to improve the oxidative properties of the latter. This behavior of the support is related to the preparation procedure, which leads to the formation on its surface of the crystalline phase of the ceria–zirconia solid solution and amorphous ZrO₂ and Al₂O₃ phases and/or their solid solution. Similar processes occur with the catalyst support during the oxidative dehydrogenation, giving rise to additional active centers (CeVO₄).     

Development of a new all solid contact Cs<Superscript>+</Superscript> ion selective electrode

Studies were carried out to develop all solid contact cesium ion selective electrode with 25,27-bis(1-octyloxy)calix[4]arene-crown-6 as an ionophore. Polyaniline (PANI), deposited on Pt electrode by electrochemical method, was used as a transducer. Three different types of electrodes were made with variation in thickness of PANI film and gold nanoparticles doped PANI as transducers. The best response was observed with ISE having Au nanoparticles doped PANI as a transducer. The optimised ISE gave Nernstian response in the range 10^?7 to 10^?2 M with the slope of 55.0 ± 0.6 mV/decade of Cs⁺. The response of ISE for Cs⁺ is fairly constant above the pH 4. The developed ISE was successfully employed to determine Cs⁺ in simulated high level nuclear waste solutions and CsCl spiked tap water samples.     

Electroreduction of Oxalate Complexes of Ruthenium(III) on a Dropping Mercury Electrode: Effect of Alkali Metal Cations and Solution Acidity

It is established that the reaction of recharging trioxalate complexes of ruthenium(III) occurs in the case of solutions with excess supporting oxalate salts of alkali metals K⁺, Na⁺, and Cs⁺ in reversible conditions, and limiting recharge currents are caused by diffusion. At the same time, values of diffusion coefficients for complex anion [Ru(C₂O₄)₃]^–3 decrease by almost two times upon going from potassium to sodium and cesium electrolytes. Substantial differences in the limiting currents in solutions containing excess amounts of the above salts are explained by the formation, at least in the case of cesium and sodium electrolytes, of ionic associates whose reduction rate at a fixed potential is lower than that of nonassociated anion [Ru(C₂O₄)₃]^–3. With solution dilution by supporting salts, transition is observed from reversible recharge conditions to absolutely irreversible conditions and a change in the above sequence of the effect of supporting cations on the recharge rate; at a fixed potential, the process decelerates in the series Cs⁺ > K⁺ > Na⁺. The reduction wave of the ruthenium(II) oxalate complexes in solutions with excess supporting electrolyte happens to depend on pH and, probably, is determined by simultaneous formation of adsorbed atoms of hydrogen (or ruthenium hydride) on atoms of ruthenium(0).     

Model-free kinetics applied for the removal of CTMA<Superscript>+</Superscript> and TPA<Superscript>+</Superscript> of the nanostructured hybrid AlMCM-41/ZSM-5 material

The nanostructured hybrid AlMCM-41/ZSM-5 composite was synthesized starting from a hydrogel with molar composition SiO₂:0.32Na₂O:0.03Al₂O₃:0.20TPABr:0.16CTMABr:55H₂O. The cetyltrimethylammonium bromide (CTMABr) and tetrapropylammonium bromide (TPABr) were used as templates. The above mentioned material presents morphological properties with specific characteristics, such as the surface area of the composite which is approximately half of the surface area of the conventional MCM-41. Another interesting feature is the formation of walls with the double of the density of the MCM-41 structure, which characterizes the hybrid material, resulting in a high stability material for catalytic application. The aim of this study is obtain optimized structures of the hybrid material and for this purpose variations in the synthesis time were carried out. A comparative analysis was performed including X-ray diffraction, Fourier transform infrared spectroscopy, and Thermogravimetry measurements. The model-free kinetic algorithms were applied in order to determinate conversion and apparent activation energy of the decomposition of the CTMA⁺ and TPA⁺ species from the hybrid AlMCM-41/ZSM-5.