Isolation of New Disilanylene-bridged Bis（cyclopentadienyl）tetracarbonyldiiron Complexes and Molecular Structure of [η^5, η^5-C5H4SiMe（SiMePh2）C5H4]Fe2（CO）2（μ-CO）2

1,2-Diphenyl-1,2-dimethyldisilanylene-bridged bis-cyclopentadienyl complex[η~5,η~5-C_5H_4PhMeSiSiMePh-C_5H_4]Fe_2(CO)_2(μ-CO)_2(1)was synthesized by a modified procedure,from which the trans-isomer 1b that was pre-viously difficult to obtain has been isolated for the first time.More interestingly,two new regio-isomers[η~5,η~5C_5H_4SiMe(SiMePh_2)C_5H_4]Fe_2(CO)_2(μ-CO)_2(2)and [η~5,η~5-C_5H_4Me_2SiSiPh_2C_5H_4]Fe_2(CO)_2(μ-CO)_2(3)were occa-sionally obtained during above process,the novel structures of which opened up new options for further study ofthis type of Si—Si bond-containing transition metal complexes.The molecular structure of 2 has been determinedby the X-ray diffraction method.     

Syntheses and Anti—inflammatory Actiobn of （η—C5H5）2Ti （Cin）2 and （η—C5H5）2Ti（Tzea）2

Two new Complexes(Cp)2Ti(Cin)2and (CP2)Ti(Tzea)2(CP=Cyclopentadienyl η^5-C5H5)have been synthesized in THF by the reaction of HCin(Cincofen,2-phenylquinoline-4-carboxylic acid)or HTzea(5-phenyltetrazolyl-2-ethanoic acid)with(Cp)2TiCl2,and characterized by elemental analyses,IR,1H NMR and 13C NMR,UV spectra,molar conductivity,TGDTA.In the complexes the carboxyl groups are coordinated to Ti(IV)in a monodentate manner,The inhibitory actions of the complexes on mice ear tumefaction caused by croton oil and the rat foot granulation growth produced by cotton wool are higher than those of the corresponding ligands HCin,HTzea and [(Cp)2TiCl2],while their toxicities are lower than those of the free ligands.ηη     

配合物{CuS2P（OCH2Ph）2[Fe（η^5-C5H4PPh2）2]}的合成和晶体结构

以二烷基二硫代磷酸亚铜和二茂铁基双膦配体为原料,二氯甲烷为溶剂合成了一个新颖的晶体化合物{CuS2P(OCH2Ph)2[Fe(η5-C5H4PPh2)2]}1。其结构通过IR,元素分析和X-射线单晶衍射法确定。化合物1中的铜原子与螯合配体dppf中的两个磷原子配位[Cu-P键长分别是2.2492(5)和2.2364(4)],并与dtp中的两个硫原子配位[Cu-S键长分别是2.4055(5)和2.4582(5)],中心铜原子形成扭曲的四面体构型。     

Synthesis and Crystal Structure of [CpRu（η^5-C5H5）（dppc）Cl][PF6]

1INTRODUCTION The fragment[Ru(η5-C5H5)(PPh3)2Cl]plays an important role in the organo-ruthenium chemistry development,and has been used as a versatile star-ting material for other compounds due to its stability and facile manipulation.Much work has shown that a wide range of ligands with different steric and electronic properties can displace not only the Cl ligand but also the phosphine groups in[Ru(η5-C5H5)(PPh3)2Cl][1].The interest in this fragment and related derivatives concer…     

Synthesis and Crystal Structure of [Cp＊Ru（η^6-C6H5BPh3）]

1 INTRODUCTION The use of organometallic building blocks in the crystalline materials engineering allows us to intro- duce the characteristics of transition metals, such as variable oxidation, spin states and ionic charges, which is of great significance for the preparation of novel materials. In recent years, some complexes with structure of [Cp*M(η6-C6H5)] group and related complexes as building blocks have already been synthesized[1～3]. One example was prepared by the reaction of [C…     

Electron density distribution in vanadocene (η5-C5H5)2V and mixed metallocenes (η5-C5H5)M(η5-C7H7) (M = Ti,V, or Cr) and (η5-C5H5)Ti(η8-C8H8). Effect of the nature of the cyclic ligand on the character of the M--(π-ligand) bond

The electron density distribution and atomic displacements were analyzed based on the results of precision low-temperature X-ray diffraction studies of a series of isostructural (Pnma, Z = 4) mixed metallocenes (⁵-C₅H₅)M(⁵-C₇H₇) (M = Ti, V, or Cr) and (⁵-C₅H₅)Ti(⁸-C₈H₈). The barriers to rotation of the cyclic ligands were evaluated based on rms libration amplitudes. Analysis of the deformation electron density demonstrated that the character of the M--(-ligand) chemical bond depends substantially both on the nature of the metal atom and the size of the ligand. Lowering of the local symmetry of the (⁵-C₅H₅)M(⁵-C₇H₇) complexes to C_S leads to distortion of the cylindrical symmetry of the electron density distribution observed in vanadocene (⁵-C₅H₅)₂V and titanocene (⁵-C₅H₅)Ti(⁸-C₈H₈).     

Molecular structure of ansa-compound (η5-C5H4)CMe2(η5-C9H6)TiCl2

The structure of a new ansa compound, (⁵-C₅H₄)CMe₂(⁵-C₉H₆)TiCl₂ (1), was studied by X-ray analysis:a = 15.00(1),b =15.500(5),c = 13.032(4) Å, = 92.66°(4),V = 3025.1(1) ų, space groupP2₁/.,R = 0.038. The distorted tetrahedral coordination sphere of the Ti atom is formed by two Cl atoms and two -ligands. It was proposed that the angle () between theC-M direction and the line normal to M-Cp can be considered as one of the geometric parameters characteristic of the structure-properties correlation.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 305–308, February, 1995.     

Five- and six-membered palladacycles derived from [(η5-C5H5)Fe{(η5-C5H4)-CH=N-(C6H4-2-C6H5)}]

The reaction of the novel ferrocenyl Schiff base: [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-CH=N-(C₆H₄-2-C₆H₅)}] (1) with Na₂[PdCl₄] and Na(CH₃COO)·3H₂O in a 1:1:1 molar ratio in methanol is reported. In this reaction two different di-μ-chloro-bridged cyclopalladated complexes: [Pd{[(η⁵-C₅H₃)-CH=N-(C₆H₄-2-C₆H₅)]Fe(η⁵-C₅H₅)}(μ-Cl)]₂ (2a) and [Pd{[(C₆H₄-2-C₆H₄)-N=CH-(η⁵-C₅H₄)]Fe(η⁵-C₅H₅)}(μ-Cl)]₂ (2b) can be formed depending on the experimental conditions. Compounds 2a and 2b, which differ in the nature of the metallated carbon atom (C_{sp²,ferrocene} or C_{sp²,biphenyl}, respectively), undergo cleavage of the ‘Pd(μ-Cl)₂Pd’ bridges in the presence of thallium (I) acetylacetonate, deuterated pyridine or triphenylphosphine giving the monomeric derivatives: [Pd(C^∧N)(acac)] (3a, 3b) and [Pd(C^∧N)Cl(L)] {with L=py- d₅(4a, 4b), PPh₃(5a, 5b)}. The reactions of 2 with 1,2-bis(diphenylphosphino)ethane (dppe) reveal that the two isomers (2a and 2b) exhibit different reactivity versus dppe. These results have been interpreted on the basis of steric effects.     

Synthesis and structure of ansa-cyclopentadienyl pyrrolyl titanium complexes: [(η-C5H4)CH2(2-C4H3N)]Ti(NMe2)2 and [1,3-{CH2(2-C4H3N)}2(η-C5H3)]Ti(NMe2)

Reaction of ansa-cyclopentadienyl pyrrolyl ligand (C₅H₅)CH₂(2-C₄H₃NH) (2) with Ti(NMe₂)₄ affords bis(dimethylamido)titanium complex [(η⁵-C₅H₄)CH₂(2-C₄H₃N)]Ti(NMe₂)₂ (3) via amine elimination. A cyclopentadiene ligand with two pendant pyrrolyl arms, a mixture of 1,3- and 1,4-{CH₂(2-C₄H₃NH)}₂C₅H₄ (4), undergoes an analogous reaction with Ti(NMe₂)₄ to give [1,3-{CH₂(2-C₄H₃N)}₂(η⁵-C₅H₃)]Ti(NMe₂) (5). Molecular structures of 3 and 5 have been determined by single crystal X-ray diffraction studies.     

Mechanism of formation of (η-C5H5)2NbH3 from the reaction of (η-C5H5)2NbCl2 with hydridoaluminate reducing agents

The mechanism of the transformation of (η⁵-C₅H₅)₂NbCl₂ to (η⁵-C₅H₅)₂NbH₃ by hydridoaluminate reducing agents has been investigated. Results suggest disproportionation of a niobium(IV) hydrite, leading to the trihydride product and a niobium(III) hydridoaluminate, (η⁵-C₅H₅)₂NbH₂AlR₂, which in turn is converted to the trihydride on hydrolysis. (η⁵-C₅H₅)₂NbH₂AlH₂ has been isolated; deuterium labelling shows that hydrogens exchange between ring and metal-bridging positions in this molecule.     

Electrochemical reduction of the dithiophosphate complexes CpFe(CO)2[η-SP(S)(OR)2], (Cp = η-C5H5 or η-C5Me5)

The reductive electrochemistry of compounds of the type CpFe(CO)₂L (Cp = η-C₅H₅, η-C₅Me₅; L = SP(S)(OEt)₂, SP(S)(OⁱPr)₂) has been examined by polarography, cylic voltammetry and coulometry. The first one-electron reduction step leads to a bond rupture process with formation of a mercury compound, [CpFe(CO)₂]₂Hg, at a mercury electrode and the corresponding dimer species at a platinum electrode. The second reduction step corresponds to the reduction of the dimer [CpFe(CO)₂]₂, except in the polarographic reduction of pentamethylcyclopentadienyl compounds.     

Cyclopentadienyl-ruthenium and -osmium chemistry : XXXIX. Syntheses of novel alkynyl-ruthenium complexes. X-Ray structures of two forms of {Ru(PPh3)2(η-C5H5)}2(μ-C4) and of Ru{CCC(O)Me}(PPh3)2(η-C5H5)

Reactions between [Ru(thf)(PPh₃)₂(η-C₅H₅)]⁺ and lithium acetylides have given further examples of substituted ethynylruthenium complexes that are useful precursors of allenylidene and cumulenylidene derivatives. From Li₂C₄, mono- and bi-nuclear ruthenium complexes were obtained: single-crystal X-ray studies have characterised two rotamers of {Ru(PPh₃)₂(η-C₅H₅)}₂(μ-C₄), which differ in the relative cis and trans orientations of the RuL_n groups. Protonation of Ru(CCCCH)(PPh₃)₂(η-C₅H₅) afforded the butatrienylidene cation [Ru(C=C=C=CH₂)(PPh₃)₂(η-C₅H₅)]⁺, which reacted readily with atmospheric moisture to give the acetylethynyl complex Ru{CCC(O)Me}(PPh₃)₂(η-C₅H₅), also fully characterised by an X-ray structural study.     

Synthesis and structure of the iron-substituted silylacetylene [(η-C5H5)Fe(CO)2SiMe2C]2 and its cobalt hexacarbonyl derivative [(η-C5H5)Fe(CO)2SiMe2C]2 · Co2(CO)6

A transition metal-substituted silylacetylene [(η⁵-C₅H₅)Fe(CO)₂SiMe₂C]₂, [FpMe₂SiC]₂ (I) was synthesized and characterized spectroscopically and structurally. I crystallized in the monoclinic space group P2₁/n, A = 13.011(3) Å B = 12.912(3) Å, C = 13.175(5) Å, β = 94.95(2). The acetylene linkage is reactive toward Co₂(CO)₈ to form I. Co₂(CO)₆ (II) which was also characterized spectroscopically and by single crystal X-ray diffraction. II crystallized in the orthorhombic space group Pbca, A = 17.64(2) Å, B = 14.225(10) Å, C = 24.49(2) Å.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

A convenient synthesis of Fe(CO)2(η-S2CNMe2)2 and Fe(η-S2CNMe2)2 from the monodentate dithiocarbamato derivative, [(η-C5H5)(CO)3W(η-SCSNMe2)] and Fe2(CO)9

A high yield synthesis of the carbonyl dithiocarbamato derivative Fe(CO)₂(η²-S₂CNMe₂)₂ and Fe(η²-S₂CNMe₂)₂ by photolysis with visible light of solutions containing Fe₂(CO)₉ or Fe₃(CO)₁₂ and [(η⁵-C₅H₅)(CO)₃W(η¹-SCSNMe₂)] is reported.     

Crystal structure of Fe(η-C5H5BCMe3)2 a “problem structure”

The complex Fe(η⁶-C₅H₅CMe₃)₂ crystallizes in the centrosymmetric triclinic space group P (C_i¹; No. 2) with unit cell dimensions of a 8.770(1) Å, b 8.878(1) Å, c 11.991(1) Å, 107.56(1)°, β 90.85(1)°, γ 90.13(1)°, V 890.0(2) ų and Z = 2. A full sphere of data was collected on a four-circle diffractometer. The structure was solved and refined to R 7.93% for all 3155 independent reflections and R 4.98% for those 2002 data with | F₀ | > 6σ. | F₀ |. The molecules lie on crystallographic inversion centers at 0, 0, 0 and 1/2, 0, 1/2; the crystallographic asymmetric unit therefore consists of two independent half molecules. The molecule centered at 0, 0, 0 (molecule “A”) is ordered and well-defined; that centered on 1/2, 0, 1/2 (molecule “B”)is probably disordered, as indicated by larger “thermal parameters” and a greater range of apparent interatomic distances. Discussion em phasizes the geometry of molecule A, which has precise C_i symmetry with Fe(1A)-B(1A) 2.297(4) Å and Fe(1A)-C(ring) distances ranging from 2.057(6) Å to 2.138(4) Å.     

Zwitterionic titanoxanes {Cp[η-C5H4B(C6F5)3]Ti}2O and {(η-PrC5H4)[η-1,3-PrC5H3B(C6F5)3]Ti}2O as catalysts for cationic ring-opening polymerization

Zwitterionic titanoxanes {Cp[η⁵-C₅H₄B(C₆F₅)₃]Ti}₂O (I) and {(η⁵-ⁱPrC₅H₄)[η⁵-1,3-ⁱPrC₅H₃B(C₆F₅)₃]Ti}₂O (II), which contain two positively charged Ti(IV) centres in the molecule, are able to catalyse the ring-opening polymerization of -caprolactone (-CL) in toluene solution and in bulk. The process proceeds with a noticeable rate even at room temperature and accelerates strongly on raising the temperature to 60 °C. The best results have been obtained on carrying out the reaction in bulk. Under these conditions, the use of I as a catalyst (-CL:I = 1000:1) gives at 60 °C close to quantitative yield of poly--CL with the molecular mass of 197 000. An increase in the -CL:I ratio to 6000:1 increases the molecular mass of poly--CL to 530 000. Tetrahydrofuran (THF) is also polymerized under the action of I albeit with a lesser rate. However, the molecular mass of the resulting poly-THF can reach rather big values under optimal conditions (up to 217 000 at 20 °C and the THF:I ratio of 770:1). A rise in the reaction temperature from 20 to 60 °C results here to a decrease in the efficiency of the process. Titanoxane II is close to I in its catalytic activity in the -CL polymerization but it is much less active in the polymerization of THF. Propylene oxide (PO), in contrast to -CL and THF, gives with I only liquid oligomers in wide temperature and PO:I molar ratio ranges (−30 to +20 °C, PO:I = 500–2000:1). γ-Butyrolactone and 1-methyl-2-pyrrolidone are not polymerized under the action of I at room temperature. The reactions found are the first examples of catalysis of the cationic ring-opening polymerization by zwitterionic metallocenes of the group IVB metals.     

Darstellung,struktur und eigenschaften des dreikernigen titankomplexes (π-C2H5)2TiClOTi(π-C5H5)ClOTiCl(π-C5H5)2·CHCl3

The trinuclear titanium(IV) complex (π-C₅H₅)₂TiClOTi(π-C₅H₅)ClOTiCl(π-C₅H₅)₂ · CHCl₃ is formed by hydrolysis of (π-C₅H₅)₂TiCl₂ at pH > 3.5 and can be isolated in the crystalline state from the reaction of (π-C₅H₅)₂TiCl₂ with Ag₂O and water in chloroform. Its structure is determined by X-ray analysis.