Syntheses, structures, spectroscopy, and chromotropism of new complexes arising from the reaction of nickel(II) nitrate with diphenyl(dipyrazolyl)methane

The complexes [(dpdpm)Ni(2-NO3)2] (1), [(dpdpm)Ni(2-NO3)(1-NO3)(CH3CN)] (2), [(dpdpm)2Ni(1-NO3)(H2O)]NO3 (3), and [(dpdpm)2Ni(H2O)2][NO3]2 (4) (dpdpm = diphenyl(dipyrazolyl)methane, Ph2C(C3N2H3)2), have been prepared and characterized by IR and UV-vis-NIR spectroscopy and X-ray diffraction studies. X-ray studies have confirmed that complexes 1-4 all adopt variously distorted octahedral structures in the solid state, the largest distortions arising from the small bite-angle of the bidentate nitrate ligand in 1 and 2. Magnetic moment measurements indicate that these solids are paramagnetic with two unpaired electrons. The solution 1H NMR data show that the paramagnetism is maintained in solution. Absorption spectra of 1-4 show three main bands in the region of 350-1000 nm representing spin allowed (d-d) transitions from the ground state 3A2g to the excited states 3T2g, 3T1g(3F), and 3T1g(3P). A weak shoulder was also detected at about 700-800 nm in most spectra, representing spin-forbidden transitions 3A2g 1Eg. A comparison of the crystal field parameters 10Dq and B for 1-4 to the corresponding values for related complexes indicated that these parameters are fairly insensitive to structural variations within this family of complexes. The 10Dq/B ratios show greater variations, but no clear correlations are apparent between 10Dq/B and such structural features as the nature of ligator atoms (N:O ratio), the bonding mode of the nitrate ligand, or the overall charge. Complexes 1 (green) and 2 (blue) interconvert as a function of temperature (solutions and solid samples), concentration of CH3CN (solutions), or CH3CN vapor pressure (solid samples).     

Nickel complexes of a bis(benzimidazolin-2-ylidene)pyridine pincer ligand with four- and five-coordinate geometries

The four- and five-coordinate complexes [(CNC)NiX(2)] (X = Cl, Br, I), [(CNC)NiX]PF(6) (X = Cl, Br) and [(CNC)NiCl]Cl·H(2)O have been isolated, where CNC is the bis(N-butylbenzimidazolin-2-ylidene)-2,6-pyridine pincer ligand. A five-coordinate geometry is rare for this class of complex. Where amenable, the complexes have been structurally characterised by single crystal X-ray diffraction studies and in solution by NMR, UV-vis and MS studies. The five-coordinate dibromo complex [(CNC)NiBr(2)] is readily prepared on the gram-scale from the benzimidazolium salt precursor and Ni(OAc)(2)·4H(2)O in DMSO without the exclusion of air. Halide exchange and salt metathesis reactions using [(CNC)NiBr(2)] afford the other four- and five-coordinate complexes. [(CNC)NiBr(2)] displays very low solubility, and upon dissolution affords solutions of the four-coordinate [(CNC)NiBr](+). Factors that influence the formation of four- or five-coordinate complexes with this ligand class are discussed.     

New dinuclear nickel(II) complexes: synthesis, structure, electrochemical, and magnetic properties

The reaction of [NiBr(2)(bpy)(2)] (bpy = 2,2'-bipyridine) with organic phosphinic acids ArP(O)(OH)H [Ar = Ph, 2,4,6-trimethylphenyl (Mes), 9-anthryl (Ant)] leads to the formation of binuclear nickel(II) complexes with bridging ArP(H)O(2)(-) ligands. Crystal structures of the binuclear complexes [Ni(2)(μ-O(2)P(H)Ar)(2)(bpy)(4)]Br(2) (Ar = Ph, Mes, Ant) have been determined. In each structure, the metal ions have distorted octahedral coordination and are doubly bridged by two arylphosphinato ligands. Magnetic susceptibility measurements have shown that these complexes display strong antiferromagnetic coupling between the two nickel atoms at low temperatures, apparently similar to binuclear nickel(II) complexes with bridging carboxylato ligands. Cyclic voltammetry and in situ EPR spectroelectrochemistry show that these complexes can be electrochemically reduced and oxidized with the formation of Ni(I),Ni(0)/Ni(III) derivatives.     

Metal complexes with 2,3-bis(diphenylphosphino)-1,4-diazadiene ligands: synthesis,structures, and an intramolecular metal-mediated [4 + 2] cycloaddition employing a benzene ring as a dienophile

2,3-Bis(diphenylphosphino)-1,4-diazadienes RN=C(PPh2)-C(PPh2)=NR (1a, R = 4-tolyl; 1b, R = 4-tert-butylphenyl; 1c, R = mesityl) were used as novel ligands for transition metals. The metal complexes [(1c)Mo(CO)4] (2a), [(1c)[Mo(CO)4]2] (2b), [(1a)Cu(Cl)(PPh3)] (3), and [(1b)[(NiBr2(THF))]2] (4) were characterized by elemental analysis, MS, and 31P[1H], 1H, and 13C NMR spectra (except the paramagnetic complex 4). Additionally, the molecular structure of the complexes in the solid state was determined by single-crystal X-ray diffraction. In 2a and 2b the chelating ligand coordinates via the N,P donor set, whereas in 3 the chelating ligand coordinates via the two P atoms. 4 contains a square-planar (P,P)NiBr2 moiety on the one side of the bridging ligand 1b. On the opposite side the 1,2-dimine unit bonds to another Ni center having octahedral geometry. The bulkier ligand 1c reacts to form the mononuclear compound 5. X-ray diffraction analysis of single crystals shows that 5 contains a quinoxaline derivative with a cyclohexa-1,3-diene ring in the peripheral position. Furthermore, it contains a bis(diphenylphosphino)-ethylene unit coordinating the NiBr2. This arrangement is the result of an intramolecular [4 + 2] cycloaddition between the 1,2-diimine unit (as diheterodiene) and the benzene ring of the 4-tolyl-N substituent (as dieneophile). The same type of ring-closing reaction followed by a tautomerization reaction to form the mononuclear compound 6 occurred by dissolution of the binuclear complex 4 in methanol. This reaction can be used as a simple method for the synthesis of novel 1,2-bis(diarylphosphanyl)ethylenes containing a quinoxaline backbone.     

Bivalent transition metal complexes of o-hydroxyacetophenone [N-(3-hydroxy-2-naphthoyl)] hydrazone: spectroscopic, antibacterial, antifungal activity and thermogravimetric studies

Schiff base complexes of Cu(II), Ni(II) and Zn(II) with the o-hydroxyacetophenone [N-(3-hydroxy-2-naphthoyl)] hydrazone (H(2)o-HAHNH) containing N and O donor sites have been synthesized. Both ligand and its metal complexes were characterized by different physicochemical methods, elemental analysis, molar conductivity ((1)H NMR, (13)C NMR, IR, UV-visible, ESR, MS spectra) and also thermal analysis (TG and DTG) techniques. The discussion of the outcome data of the prepared complexes indicates that the ligand behave as a bidentate and/or tridentate ligand. The electronic spectra of the complexes as well as their magnetic moments suggest octahedral geometries for all isolated complexes. The room temperature solid state ESR spectrum of the Cu(II) complex shows d(x2-y2) as a ground state, suggesting tetragonally distorted octahedral geometry around Cu(II) centre. The molar conductance measurements proved that the complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E(#), ΔH(#), ΔG(#), ΔS(#) are calculated from the DTG curves, for the [Ni(H(O)-HAHNH)(2)] and [Zn(H(2O)-HAHNH)(OAc)(2)]·H(2)O complexes using the Coats-Redfern equation. Also, the antimicrobial properties of all compounds were studied using a wide spectrum of bacterial and fungal strains. The [Cu(Ho-HAHNH)(OAc)(H(2)O)(2)] complex was the most active against all strains, including Aspergillus sp., Stemphylium sp. and Trichoderma sp. Fungi; E. coli and Clostridium sp. Bacteria.     

Synthesis and characterization of mononuclear zinc aryloxide complexes supported by nitrogen/sulfur ligands possessing an internal hydrogen bond donor

Treatment of a dinuclear zinc hydroxide complex ([(bmnpaZn)(2)(mu-OH)(2)](ClO(4))(2) (1) or [(benpaZn)(2)(mu-OH)(2)](ClO(4))(2) (2)) with excess equivalents of an aryl alcohol derivative (p-HOC(6)H(4)X; X = NO(2), CHO, CN, COCH(3), Br, H, OCH(3)) yielded the nitrogen/sulfur-ligated zinc aryloxide complexes [(bmnpa)Zn(p-OC(6)H(4)NO(2))](ClO(4)) (3), [(benpa)Zn(p-OC(6)H(4)NO(2))](ClO(4)) (4), [(benpa)Zn(p-OC(6)H(4)CHO)](ClO(4)) (5), [(benpa)Zn(p-OC(6)H(4)CN)](ClO(4)) (6), [(benpa)Zn(p-OC(6)H(4)COCH(3))](ClO(4)) x 0.5H(2)O (7), [(benpa)Zn(p-OC(6)H(4)Br)](ClO(4)) (8), [(benpa)Zn(p-OC(6)H(5))](ClO(4)) (9), and [(benpa)Zn(p-OC(6)H(5)OCH(3))](ClO(4)) (10). The solid state structures of 2, 3, 5, and 6 have been determined by X-ray crystallography. While 3 and 6 exhibit a mononuclear zinc ion possessing a distorted five-coordinate trigonal bipyramidal geometry, in 5 each zinc center exhibits a distorted six-coordinate octahedral geometry resulting from coordination of the aldehyde carbonyl oxygen of another zinc-bound aryloxide ligand, yielding a chain-type structure. Zinc coordination of the aldehyde carbonyl of 5 is indicated by a large shift (>40 cm(-)(1)) to lower energy of the carbonyl stretching vibration (nu(C[double bond]O) in solid state FTIR spectra of the complex. In the solid state structures of 3, 5, and 6, a hydrogen-bonding interaction is found between N(3)-H of the supporting bmnpa/benpa ligand and the zinc-bound oxygen atom of the aryloxide ligand (N(3)...O(1) approximately 2.78 A). Solution (1)H and (13)C NMR spectra of 3-10 in CD(3)CN and FTIR spectra in CH(3)CN are consistent with all of the aryloxide complexes having a similar solution structure, with retention of the hydrogen-bonding interaction involving N(3)-H and the oxygen atom of the zinc-coordinated aryloxide ligand. For this family of zinc aryloxide complexes, a correlation was discovered between the chemical shift position of the N(3)-H proton resonance and the pK(a) of the parent aryl alcohol. This correlation indicates that the strength of the hydrogen-bonding interaction involving the zinc-bound aryloxide oxygen is increasing as the aryloxide moiety increases in basicity.     

Electronic and molecular structures of trans-dioxotechnetium(V) polypyridyl complexes in the solid state

The structures of novel Tc(V) complexes trans-[TcO(2)(py)(4)]Cl·2H(2)O (1a), trans-[TcO(2)(pic)(4)]Cl·2H(2)O (2a), and trans-[TcO(2)(pic)(4)]BPh(4) (2b) were determined by X-ray crystallography, and their spectroscopic characteristics were investigated by emission spectroscopy and atomic scale calculations. The cations adopt a tetragonally distorted octahedral geometry, with a trans orientation of the apical oxo groups. trans-[TcO(2)(pic)(4)]BPh(4) has an inversion center located on technetium; however, for trans-[TcO(2)(py)(4)]Cl·2H(2)O and trans-[TcO(2)(pic)(4)]Cl·2H(2)O, a strong H bond formed by only one of the oxo substituents introduces an asymmetry in the structure, resulting in inequivalent trans Tc-N and Tc═O distances. Upon 415 nm excitation at room temperature, the complexes exhibited broad, structureless luminescences with emission maxima at approximately 710 nm (1a) and 750 nm (2a, 2b). Like the Re(V) analogs, the Tc(V) complexes luminesce from a (3)E(g) excited state. Upon cooling the samples from 278 to 8 K, distinct vibronic features appear in the spectra of the complexes along with increases in emission intensities. The low temperature emission spectra display the characteristic progressions of the symmetric O═Tc═O and the Tc-L stretching modes. Lowest-energy, triplet excited-state distortions calculated using a time-dependent theoretical approach are in good agreement with the experimental spectra. The discovery of luminescence from the trans-dioxotechnetium(V) complexes provides the first opportunity to directly compare fundamental luminescence properties of second- and third-row d(2) metal-oxo congeners.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

Synthesis, electronic and ESR spectral studies on copper(II) nitrate complexes with some acylhydrazines and hydrazones

This paper describes the preparation of [Cu(bh)(2)(H(2)O)(2)](NO(3))(2)], [Cu(ibh)(2)(NO(3))(2)], [Cu(ibh)(2)(H(2)O)(2)](NO(3))(2) and [Cu(iinh)(2)(NO(3))(2)] (bh=benzoyl hydrazine (C(6)H(5)CONHNH(2)); ibh=isonicotinoyl hydrazine (NC(5)H(4)CONHNH(2)); ibh=isopropanone benzoyl hydrazone (C(6)H(5)CONHN=C(CH(3))(2); iinh=isopropanone isonicotinoyl hydrazone (NC(5)H(4)CONHN=C(CH(3))(2)). These copper(II) complexes are characterized by elemental analyses, molar conductances, dehydration studies, ESR, IR and electronic spectral studies. The electronic and ESR spectra indicate that each complex exhibits a six-coordinate tetragonally distorted octahedral geometry in the solid state and in DMSO solution. The ESR spectra of most of the complexes are typically isotropic type at room temperature (300K) in solid state as well as in DMSO solution. However, all the complexes exhibit invariably axial signals at 77K in DMSO solution. The trend g(||)>g( perpendicular)>g(e,) observed in all the complexes suggests the presence of an unpaired electron in the [Formula: see text] orbital of the Cu(II). The bh and inh ligands bond to Cu(II) through the >CO and NH(2) groups whereas, ibh and iinh bond through >CO and >CN groups. The IR spectra of bh and ibh complexes also show HOH stretching and bending modes of coordinated water.     

Metal complexes of Schiff base derived from sulphametrole and o-vanilin. Synthesis, spectral, thermal characterization and biological activity

Metal complexes of Schiff base derived from condensation of o-vanilin (3-methoxysalicylaldehyde) and sulfametrole [N(1)-(4-methoxy-1,2,5-thiadiazole-3-yl)sulfanilamide] (H2L) are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance, mass spectra, UV-vis and thermal analysis (TGA). From the elemental analyses data, the complexes were proposed to have the general formulae [M2X3(HL)(H2O)5].yH2O (where M=Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II), X=Cl, y=0-3); [Fe2Cl5(HL)(H2O)3].2H2O; [(FeSO4)2(H2L)(H2O)4] and [(UO2)2(NO3)3(HL)(H2O)].2H2O. The molar conductance data reveal that all the metal chelates were non-electrolytes. The IR spectra show that, H2L is coordinated to the metal ions in a tetradentate manner with ON and NO donor sites of the azomethine-N, phenolic-OH, enolic sulphonamide-OH and thiadiazole-N. From the magnetic and solid reflectance spectra, it is found that the geometrical structures of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, DeltaH*, DeltaS* and DeltaG* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligand, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia coli, Salmonella typhi, Bacillus subtillus, Staphylococcus aureus and Fungi (Aspergillus terreus and Aspergillus flavus). The activity data show that the metal complexes to be more potent/antimicrobial than the parent Shciff base ligand against one or more microbial species.     

Stannaborate transition metal chemistry: ligand properties, reactivity, and density functional theory calculations of platinum and palladium complexes

Three stannaborate complexes of platinum(II) and a novel stannoborate palladium(II) derivative have been prepared in excellent yield. The tin transition metal bond is formed through nucleophilic substitution and the resulting complexes [Bu3MeN] [trans-[(Et3P)2Pt(SnB11H11)H]] (6), [trans-[(Et3P)2Pt(SnB11H11)(CNtBu)]] (7), [Bu3MeN]2[trans-[(Et3P)2Pt(SnB11H11)2-(CNtBu)]] (8), and [Bu3MeN][(dppe)-Pd(SnB11H11)Me] (12) (dppe = 1,2-bis-(diphenylphosphanyl)ethane) were characterized by NMR spectroscopy and elemental analysis. In the cases of the zwitterion 7, the pentacoordinated complex 9, the palladium salt 12 and [(triphos)Pt(SnB11H11)] (10) (triphos = 1,1,1-tris(diphenylphosphanylmethyl)ethane), their solid-state structures are determined by X-ray crystal structure analyses. The trans influence of the [SnB11H11] ligand is evaluated from the results of the IR spectroscopy and X-ray crystallographic structures of complexes 6, 7, and 12. The dipole moment of the zwitterion 7 is calculated by density functional theory (DFT) methods. The alignment of the dipole moments of the polar molecules 7 and 12 in the solid state is discussed.     

'Pincer' pyridine dicarbene complexes of nickel and their derivatives. Unusual ring opening of a coordinated imidazol-2-ylidene

The reaction of NiBr2(DME), DME = 1,2-dimethoxyethane, with the pincer pyridine dicarbene ligands (C-N-C) ( 2) and (C-NMe-C) ( 2Me), (C-N-C = 2,6-bis-[(DiPP)imidazol-2-ylidene]pyridine, C-NMe-C = 2,6-bis-[(DiPP)imidazol-2-ylidene]-3,5-dimethylpyridine, DiPP = 2,6-diisopropylphenyl) gave the square planar complexes [Ni(C-N(Me)-C)Br]Br, 3.( Br)- and 3Me.( Br)- respectively. Transmetallation from [(C-NMe-C)2Ag2](Ag6I8), 6Me.( Ag6 I8)2- to NiBr2(DME) gave [Ni(C-NMe-C)Br](AgI2), 3Me.( AgI2)-. Reaction of 3.( Br)- with KPF6 resulted only in exchange of the ionic bromide, however the reaction of 3.( Br)- with AgBF4 in MeCN or AgOTf in THF resulted in the exchange of both coordinated and ionic bromides, giving rise to the square planar 4.( BF4)-2 and octahedral 5, respectively. In contrast, the reaction of 3Me.( AgI2)-, with excess AgOTf resulted in an unusual reverse transmetallation leading to 6Me.( OTf)-. The substitution of tmeda in Ni(CH3)2(tmeda), tmeda = N,N,N,N-tetramethylethylenediamine, by 2 produced the complex 7, in which ring opening of the heterocyclic imidazole ring of one of the NHC functional groups has taken place.     

Construction of 3d-4f mixed-metal complexes based on a binuclear oxovanadium unit: synthesis, crystal structure, EPR, and magnetic properties

The oxovanadium(IV)-lanthanide(III) heteronuclear complexes, [[Ce(H2O)7(VO)(TTHA)0.5][(VO)2(TTHA)]].8H2O (2), [Pr(H2O)7(VO)3(TTHA)1.5].10H2O (3), and [Nd(H2O)7(VO)3(TTHA)(1.5)].10H2O (4) (H6TTHA = triethylenetetraaminehexaacetic acid), were prepared based on a binuclear building block of [(VO)2(TTHA)]2- in [VO(H2O)5][(VO)2TTHA].4H2O (1). The X-ray crystallographic studies show that 1 is an ion-pair complex, containing the [(VO)2(TTHA)]2- unit as a useful building block. Adding the light Ln3+ ions to this synthesis system, three new 3d-4f mixed-metal-based complexes were obtained. Although the light lanthanide ions always exhibit similar chemical behavior, the structures of 2-4 are not homologous. 2 is exhibited as a one-dimensional coordination polymer, comprising an unusual Ce2V2 heterometallic lattice in the chain structure, which is the second report of a oxovanadium(IV)-lanthanide(III) coordination polymer. 3 and 4 are isomorphic, every two of the Ln3+ cations linked three [(VO)2(TTHA)]2- anions, forming an interesting linear octanuclear structure. This kind of heteronuclear linear complex is rather rare, which expands the realm of 3d-4f complexes. Further investigations such as IR spectra, UV-vis spectra, magnetic properties, and EPR spectra were studied, and a detailed discussion is given for this system.     

Synthesis and spectroscopic characterization of nickel(II) complexes of 1-benzotriazol-1-yl-[(p-X-phenyl)hydrazone]propan-2-one

The reaction of NiCl(2).H(2)O with 1-benzotriazol-1-yl-[(p-X-phenyl)hydrazone]propan-2-one, X=H (HL(1)), X=Cl (HL(2)), X=Br (HL(3)) and X=Me (HL(4)), gave the complexes [(HL)NiCl(2)] x nH(2)O and [LNi(OH)](2), where L is the monobasic anion of HL(2) or HL(3). The nature of the products is solvent and ligand dependent. The complexes are characterized by elemental analyses, molar conductivity, magnetic moments and spectroscopic (IR and UV/vis) measurements. The IR showed that the ligands act as neutral bidentate coordinated to the nickel(II) through the azomethine nitrogen and carbonyl oxygen atoms in case of [(HL)NiCl(2)] x nH(2)O. In case of [LNi(OH)](2), the ligands are monobasic bidentate bonded to the nickel(II) through the azomethine nitrogen and the enolato oxygen atoms. The room temperature magnetic moment values of 1.58-2.49 B.M. for [(HL)NiCl(2)] x nH(2)O and [LNi(OH)](2) and their electronic spectral data indicate that these complexes have square planar-tetrahedral equilibrium. The values of 1.61 and 1.58 B.M. for the hydroxo-complexes support their dimeric nature. The electronic spectral of [(HL)NiCl(2)] x nH(2)O and [LNi(OH)](2) in pyridine or alpha-picoline indicated the formation of six-coordinate adducts. The hydroxo-complexes reacted with different Lewis bases to give the complexes [L(2)Ni(L(s))(2)], where L(s)=Py, 2-Pic, 3-Pic, 4-Pic or n-PrNH(2). The relationship between the pK(b) of the Lewis base and the upsilon(Ni-O) of the ligand and upsilon(Ni-N) of the Lewis base was studied. The different ligand field parameters are calculated for the parent ligands in solutions and the solid mixed ligand complexes. The data showed that both are associated with a distorted octahedral ligand field around the nickel(II) and the ligand fields in solution are different from that in solid. The extent of distortion for the parent complexes is more than that in the solid adducts. Furthermore, the data showed that the nickel-ligand bonding in [LNi(OH)](2) is more covalent than in [L(2)Ni(L(s))(2)].     

Aryl Phosphine Nickel(II) and Palladium(II) Complexes with N,O‐Amino‐carboxylate Chelate Ligands [(Aryl)(R3P)M(N,O‐α‐aminocarboxylate)](M = Ni,Pd). Catalysts for the Polymerization of Olefins

The title complexes [(Aryl)(R₃P)M(N,O‐α‐aminocarboxylate)] (M = Ni, Pd) were synthesized by reaction of [(o‐tolyl)(Ph₃P)₂NiBr] or of [(p‐Me₃CC₆H₄)(o‐tolyl₃P)Pd(μ‐Br)]₂ with the anions of α‐amino acids. The spectroscopic data indicate that the nickel complexes are formed as mixtures of isomers, whereas for the palladium complexes only one isomer is observed. The complex [(o‐tolyl)(Ph₃P)Ni(glycinate)] is – in the presence of AlEt₃ – a highly active catalyst for the polymerization of ethylene [up to 1800 kg PE / (mol Ni·h)] and gives polymers with remarkably high molecular weights (up to 900.000 g/mol) and with few branchings.     

Sensitized near-infrared emission from complexes of YbIII, NdIII and ErIII by energy-transfer from covalently attached PtII-based antenna units

A series of dinuclear platinum(II)-lanthanide(iii) complexes has been prepared in which a square-planar Pt(II) unit, either [(PPh(3))(2)Pt(pdo)] (H(2)pdo=5,6-dihydroxyphenanthroline) or [Cl(2)Pt(dppz)] [dppz=2,3-bis(2-pyridyl)pyrazine], is connected to a Ln(dik)(3) unit ("dik"=a 1,3-diketonate ligand). The mononuclear complexes [(PPh(3))(2)Pt(pdo)] and [Cl(2)Pt(dppz)] both have external, vacant N,N-donor diimine-type binding sites that react with various [Ln(dik)(3)(H(2)O)(2)] units to give complexes [(PPh(3))(2)Pt(micro-pdo)Ln(tta)(3)] (series A; Htta=thenoyltrifluoroacetone), [Cl(2)Pt(micro-dppz)Ln(tta)(3)] (series B); and [Cl(2)Pt(micro-dppz)Ln(btfa)(3)] (series C; Hbtfa=benzoyltrifluoroacetone); in all of these the lanthanide centres are eight-coordinate. The lanthanides used exhibit near-infrared luminescence (Nd, Yb, Er). Crystal structures of members of each series are described. In all complexes, excitation into the Pt-centred absorption band (at 520 nm for series A complexes; 440 nm for series B and C complexes) results in characteristic near-IR luminescence from the Nd, Yb or Er centres in both the solid state and in CH(2)Cl(2), following energy-transfer from the Pt antenna chromophore. This work demonstrates how d-block-derived chromophores, with their intense and tunable electronic transitions, can be used as sensitisers to achieve near-infrared luminescence from lanthanides in suitably designed heterodinuclear complexes based on simple bridging ligands.     

Synthesis,Crystal Structure and Spectroscopic Characterisation of Mono‐ and Dinuclear 5,5‐Diethylbarbiturato Complexes of Chromium(0) and Rhenium(I)

Addition of 5,5‐diethylbarbituric acid (H₂debarb, 1 ) to [CpCr(NO)₂Cl], [Re(CO)₅Br] or [(PPh₃)Re(CO)₄Br] in the presence of triethylamine and AgO₃SCF₃ (= AgOTf) resulted in the mono‐barbiturato complexes [CpCr(NO)₂(Hdebarb)] ( 2 ), [PPh₃Re(CO)₄(Hdebarb)] ( 3 ) and [Re(CO)₅(Hdebarb)] ( 4 ), respectively. Bis‐barbiturato complex [{(CO)₅Re}₂(debarb)] ( 5 ) with a doubly deprotonated barbiturate dianion formed when a molar ratio of metal complex to ligand of 2:1 was used. In the case of the rhenium complexes, AgO₃SCF₃ must be used additionally to cleave off bromide. All of the complexes were fully characterised by means of IR, mass and ¹H, ¹³C and ³¹P NMR spectra and elemental analysis. In addition, their solid‐state structures were determined by single‐crystal X‐ray diffraction studies. The complexes exhibit distorted pseudo‐tetrahedral ( 2 ) or pseudo‐octahedral ( 3 – 5 ) configuration around the metal atom. In all complexes the ring system of the Hdebarb ligand is essentially planar.     

Redox properties of ruthenium nitrosyl porphyrin complexes with different axial ligation: structural, spectroelectrochemical (IR, UV-visible, and EPR), and theoretical studies

Experimental and computational results for different ruthenium nitrosyl porphyrin complexes [(Por)Ru(NO)(X)] ( n+ ) (where Por (2-) = tetraphenylporphyrin dianion (TPP (2 (-) )) or octaethylporphyrin dianion (OEP (2-)) and X = H 2O ( n = 1, 2, 3) or pyridine, 4-cyanopyridine, or 4- N,N-dimethylaminopyridine ( n = 1, 0)) are reported with respect to their electron-transfer behavior. The structure of [(TPP)Ru(NO)(H 2O)]BF 4 is established as an {MNO} species with an almost-linear RuNO arrangement at 178.1(3) degrees . The compound [(Por)Ru(NO)(H 2O)]BF 4 undergoes two reversible one-electron oxidation processes. Spectroelectrochemical measurements (IR, UV-vis-NIR, and EPR) indicate that the first oxidation occurs on the porphyrin ring, as evident from the appearance of diagnostic porphyrin radical-anion vibrational bands (1530 cm (-1) for OEP (*-) and 1290 cm (-1) for TPP (*-)), from the small shift of approximately 20 cm (-1) for nu NO and from the EPR signal at g iso approximately 2.00. The second oxidation, which was found to be electrochemically reversible for the OEP compound, shows a 55 cm (-1) shift in nu NO, suggesting a partially metal-centered process. The compounds [(Por)Ru(NO)(X)]BF 4, where X = pyridines, undergo a reversible one-electron reduction. The site of the reduction was determined by spectroelectrochemical studies to be NO-centered with a ca. -300 cm (-1) shift in nu NO. The EPR response of the NO (*) complexes was essentially unaffected by the variation in the substituted pyridines X. DFT calculations support the interpretation of the experimental results because the HOMO of [(TPP)Ru(NO)(X)] (+), where X = H 2O or pyridines, was calculated to be centered at the porphyrin pi system, whereas the LUMO of [(TPP)Ru(NO)(X)] (+) has about 50% pi*(NO) character. This confirms that the (first) oxidation of [(Por)Ru(NO)(H 2O)] (+) occurs on the porphyrin ring wheras the reduction of [(Por)Ru(NO)(X)] (+) is largely NO-centered with the metal remaining in the low-spin ruthenium(II) state throughout. The 4% pyridine contribution to the LUMO of [(TPP)Ru(NO)(py)] (+) is correlated with the stability of the reduced form as opposed to that of the aqua complex.     

Effects of Pt...Pt bonding, anions, solvate molecules, and hydrogen bonding on the self-association of Chugaev's cation, a platinum complex with a chelating carbene ligand

Five salts, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](BPh(4)).CH(3)OH, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](PF(6)).CH(2)Cl(2), [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Br.3.5H(2)O, and [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.0.1H(2)O, have been crystallized and examined by single crystal X-ray diffraction. While the internal structure of the cation is similar in all salts, the interactions between cations vary in the different salts. Yellow [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](BPh(4)).CH(3)OH and red [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](PF(6)) form face-to-face dimers with Pt...Pt separations of 3.6617(6) and 3.340(2) A, respectively. In the latter, hydrogen bonding of the chelating ligand to adjacent anions facilitates the close approach of pairs of cations. The salts [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Br.3.5H(2)O, and [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.0.1H(2)O form columnar structures with Pt...Pt separations that range from 3.2514(5) to 3.5643(6) A. The water molecules and anions surround these columns and form bridges between neighboring columns. The electronic spectra of aqueous solutions of [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O show spectral changes upon increasing concentrations of the platinum complex that are indicative of the formation of a dimer in solution with an equilibrium constant for dimerization of 23(1).     

固相配位化学反应研究——ⅩⅩⅩⅩⅠ.[Co(NH_3)_5(H_2O)]Br_3,[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应动力学研究

本文主要用气相色谱逸出气体分析方法,借助于红外、紫外可见漫反射谱等手段研究了[Co(NH_3)_5(H_2O)]Br_3、[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应,计算了失水与失氨的动力学参数,发现第一步反应失水生成一取代中间产物,其活化能与外加阴离子无关,为S_N1过程。第二步失氨反应活化能与中心离子M以及取代基Y有关,当M=Co(Ⅲ)时,反应体系的失氨活化能大小有下列顺序:Cl>Br>Ⅰ(E值分别为187、155、98kJ·mol~(-1)),M=Cr(Ⅲ)时则正好相反:Ⅰ>Br>Cl(E值分别为213、146、79 kJ·mol~(-1))。