Analysis of complex thermoanalytical curves: The thermodynamic and kinetic parameters of isopropylammonium nitrate

A method is presented to determine thermodynamic and kinetic parameters from complex thermoanalytical curves. Such curves are obtained when thermoanalytical events like phase transition and chemical decomposition overlap.Isopropylammonium nitrate was taken as an example to demonstrate how these parameters were determined from non-isothermal TG and DSC curves by constructing DSC-DTG sum curves.

---

Zusammenfassung Es wird ein Verfahren zur Bestimmung thermodynamischer und kinetischer Parameter von komplexen thermoanalytischen Kurven beschrieben. Kurven dieser Art entstehen bei der Überlappung thermoanalytischer Ereignisse wie z.B. Phasenumwandlungen und chenliche Zersetzungen.Am Beispiel von Isopropylammoniumnitrat wird demonstriert, wie die einzelnen Parameter der nicht-isothermen TG und DSC Kurven durch Konstruktion von DSC-DTG-Summenkurven ermittelt werden.

---

$ . , $ . , -.

     

Mass-spectrometric detection of an unstable product in silver-methanol interaction

The low pressure interaction of methanol vapors with a silver catalyst was studied by mass spectrometry. An unstable product contributing to m/e-15 was detected in this reaction. While yield of formaldehyde increased with addition of oxygen, the unstable product showed towards oxygen a reversed, decreasing trend.

---

- , m/e=15. , .

     

Kinetics of Fe3+ and Cu2+ sorption by fibrous polyampholite

The kinetics of Fe³⁺ and Cu²⁺ sorption from sulfate salt solutions by fibrous polyampholite have been studied.

---

Fe³⁺ Cu²⁺ , .

     

Role of tellurium in the oxidation of 1-butene on Te-doped CdMoO4

New active and selective catalysts were prepared by adding different quantities of Te to CdMoO₄. These were already selective at low Te levels, but the one with a Cd/Te/Mo ratio of 1/1/1 was specific for butadiene. The catalytic behavior of the Cd–Te–Mo–O system has been correlated mainly with the CdTeMoO₆ phase in the region rich in Te and with the CdMoO₄ phase with Te as dopant in the region poor in Te.

---

Te CdMoO₄. Te, CdTeMo=111 . Cd–Te–Mo–O CdTeMoO₆ Te, CdMoO₄ Te , Te.

     

Inductive hydrogen formation in the oxidation of ascorbic acid by nitrosylpentacyanoferrate(II)

In the first period of the reaction at pH 8 slow evolution of CO₂ and N₂O was observed. After gas evolution ceased, on adding NaOH, formation of N₂O again and, unexpectedly, H₂ was found. The amount of H₂ was measured as a function of reaction conditions. Illumination with visible light and the excess of the oxidant promote hydrogen evolution. The experiments in D₂O resulted in H₂, HD and D₂. The non-statistical isotope distribution was interpreted by a kinetic isotope effect.

---

pH=8 CO₂ N₂O. NaOH, N₂O , , H₂. H₂ . . D₂O H₂, HD D₂. .

     

A DSC-TLC analysis of thermolysis reactions involving 2'-deoxynucleosides

Differential scanning calorimetry (DSC) has provided a universal tool for ascertaining the effects of preparation and thermal history on the physical characteristics of polymers. When applied to the study of nonpolymeric compounds, however, the interpretation of thermal analysis data may be complicated by the possible occurrence of chemical as well as physical transformations under thermal stress. In the present study involving 2'-deoxynucleosides, this difficulty has been resolved by utilizing a DSC-TLC combination to correlate thermal phenomena with corresponding chemical and physical changes. This combination shows great promise in extending the application of DSC to the investigation of thermal reactions.

---

Zusammenfassung Die Differential-Scanning-Kalorimetrie (DSC) ist besonders geeignet zum Nachweis des Einflusses der Herstellungsbedingungen und thermischen Vorgeschichte auf die Beschaffenheit von Polymeren. Beim Einsatz zur Untersuchung nicht-polymerer Verbindungen kann jedoch die Deutung der Daten der Thermoanalyse schwierig werden, da durch thermische Stresswirkung chemische sowie physikalische Unwandlungen stattfinden können. In diesem Beitrag, der sich mit 2'-Desoxynucleosiden befasst, wurde diese Schwierigkeit durch Anwendung einer Kombination von DSC und TLC behoben, welche die Korrelation thermischer Erscheinungen mit den entsprechenden chemischen und physikalischen Änderungen gestattete. Diese Kombination von DSC und TLC ist hinsichtlich der Erweiterung des Anwendungsgebiets der DSC auf die Untersuchung thermischer Reaktionen vielversprechend.

---

Résumé L'analyse calorimétrique différentielle (DSC) est une méthode universelle pour mettre en évidence les effets de la préparation et du passé thermique sur les caractéristiques physiques des polymères. Cependant, si on l'applique à l'étude de composés non-polymères, l'interprétation des données d'analyse thermique peut être compliquée par l'intervention possible de transformations chimiques ou physiques sous l'effet du traitement thermique. Dans la présente étude sur les désoxy-2'-nucléosides cette difficulté est éliminée en combinant la DSC et la TLC afin d'établir une corrélation entre les phénomènes thermiques qui correspondent aux changements chimiques et physiques. L'emploi combiné de ces deux méthodes semble promis à une grande extension.

---

. , , , . , 2- ** , - . ** .

---

---

N.S.F. Undergraduate Research Participant from SUNY College at Plattsburg, Summer 1975.     

V2O5/TiO2 oxidation catalysts, III. Oxidation of CO on pure and sodium-doped systems

The activity of vanadia/titania catalysts in CO oxidation has been tested and found to be of the same order as that observed for unsupported vanadia; the simultaneous presence of vanadium-sodium compounds cancels the activity, probably because of the elimination of labile V=0 species at surface defects.

---

V₂O₅/TiO₂ CO, V₂O₅; - , , V=0 .

     

Free-radical pyrolysis of ethanal in the presence of mono-or diolefins: Addition and hydrogen transfer mechanisms

The effects of mono-and diolefins on ethanal pyrolysis are summarized and discussed. It is shown that an addition and a hydrogen transfer mechanism, separately or together, may account for the experimental results obtained with various mono- and diolefins.

---

- . , , , , - .

     

Relations between the probability of heterogeneous-homogeneous radical-chain mechnism and oxygen bond energy in oxide catalysts

Transition metal oxides increase the first ignition limit for 2 H₂+O₂ mixture (P₁) due to their reduction by H atoms, which leads to chain termination. The dependence of P₁ on the metal-oxygen bond energy and also on the heterogeneous catalytic activity of oxides has been established.

---

(P₁) -, . P₁ -, P₁ - .

     

Thermal behaviour of trimethoxy silane modified alkyl methacrylates

The paper deals with the thermal behaviour of trimethoxy silane (MTS) modified ethyl methacrylate (EMA) and butyl methacrylate (BMA). Several copolymer samples were prepared by varying the molar ratio of MTS with respect to EMA or BMA. The copolymerisation was carried out at 78 °C for 120 min using benzoyl peroxide as an initiator. Incorporation of MTS in alkyl methacrylates resulted in an increase in thermal stability. Hydrolytic cross-linking of copolymer having higher mole fraction of MTS gave a cross-linked product with better thermal stability.

---

Zusammenfassung Vorliegende Arbeit beschäftigt sich mit dem thermischen Verhalten von Äthylmethakrylat (EMA) und Bulhylmethakrylat (BMA), das mit Trimethoxysilan (MTS) modifiziert wurde. Unter Anwendung verschiedener Molverhältnisse von MTS und EMA bzw. BMA wurden einige Kopolymerproben hergestellt. Die Kopolymerisation wurde 120 Minuten lang bei 78 °C und mit Benzoylperpxid als Initiator durchgeführt. Der Einbau von MTS in Alkylmethakrylate führt zu einer Steigerung der thermischen Stabilität. Eine hydrolytische Vernetzung der Kopolymere mit größeren Molanteilen an MTS ergeben vernetzte Produkte mit verbesserter thermischer Stabilität.

---

() ( ), (). . 78 °C 120 , . . , , .

     

Catalytic decomposition of N2O on La2CuO4 in the presence of LaNi5 alloy

Decomposition of N₂O has been studied on pure La₂CuO₄, La₂CuO₄ with 5 and 10 wt. % LaNi₅ and oxidized LaNi₅ in the temperature range of 240–490 °C at 50 and 200 Torr initial pressures of N₂O. The addition of LaNi₅ decreases the energy of activation compared to that of La₂CuO₄ which has been explained based on the dispersity of NiO over La₂CuO₄.

---

N₂O La₂CuO₄ La₂CuO₄ LaNi₅ 5–10 .%, 240–490°C N₂O 50 200 . LaNi₅ , . NiO La₂CuO₄.

     

Oxidative bromination of olefins catalyzed by thallium(III) and heteropolyacids in aqueous solutions

The system Tl^III+HPA-n, where HPA-n is the heteropolyacid H_3+nPMo_12–nV_nO₄₀ with n=2–8, in the presence of O₂ is found to be a homogeneous catalyst for the oxidative bromination of olefins by Br^– ions in aqueous solutions.

---

, Tl^III+HPA-n, HPA-n — H_3+nPMo_12–nV_nO₄₀ n=2–8, O₂ Br^– .

     

Routes of catalytic oxidation of o-xylene to phthalic anhydride

Relative reactivity of o-xylene, o-tolualdehyde, phthalide, and phthalane and the rate of phthalic anhydride formation from them have been determined. The main route of o-xylene oxidation to phthalic anhydride is due to the o-arrangement of methyl groups, proceeding through bicyclic products, such as dihydrobenzofuran (phthalane) and 3,4-benzofuran.

---

-, - , , . - - : () 3,4-.

     

On the classification and coding of linear reaction mechanisms

Non-oriented kinetic graphs are classified and coded according to their topological properties.

---

.

---

---

Reported in part at The 5th All-Union Meeting on Homogeneous Catalysis, Alma-Ata, October 1979     

Dielectric-differential thermal analysis part I: Method

A thermal analyzer design is described. The instrument is capable of performing simultaneously differential thermal analysis and dielectric thermal analysis under the same experimental conditions. The theoretical basis of dielectric thermal analysis is superficially analyzed, and results obtained on different kinds of substances are presented.

---

Zusammenfassung Es wird eine Thermoanalyzer-Konstruktion beschrieben. Mit dem Gerät können differentialthermoanalytische und unter den Bedingungen der thermischen Analyse vorgenommene dielektrische Messungen simultan unter gleichen Bedingungen ausgeführt werden. Die theoretische Grundlage der dielektrischen Thermoanalyse wird kurz behandelt. Für Substanzen verschiedener Art erhaltene Ergebnisse sind angegeben.

---

. . , , .

     

ESR studies of coke formation on zeolite catalysts for methanol conversion

Pentasil type zeolite catalysts with different SiO₂/Al₂O₃ ratios carbonized during methanol conversion at 380–420°C have been studied by the ESR method. Factors responsible for the formation of condensed coke structures on their surface have been established. SiO₂/Al₂O₃, 380–420°C. , .     

Spectral and thermal studies of copper(II) complexes of 3- and 4-pyridinealdoxime

Copper(II) complexes of 3- and 4-pyridinealdoxime have been prepared and analyzed by spectroscopic (ir and diffuse reflectance) and thermoanalytical (TG, DTG and DTA) techniques. For both these systems, only species with metal: organic ligand: chloride ratio of 122 were found, and the organic ligand appears as a neutral molecule. The spectral data suggest a polymeric structure where the copper(II) ions are in a distorted octahedral environment.The thermal decompositions occur through the reduction of copper(II) to copper(I) and the conversion of the residual organic ligand into acid amide, as found for dihydrogenbis(pyridine-2-aldoxime) copper(II) chloride, but the initial decomposition temperatures are slightly increased, giving rise to the thermal stability sequence:

---

Zusammenfassung Kupfer(II)-Komplexe von 3- und 4-Pyridinaldoxim wurden hergestellt und spektroskopisch (IR und diffuse Reflexion) sowie thermoanalytisch (TG, DTG und DTA) analysiert. Für beide Systeme wurden nur Species mit einem Metall:Ligand:Chlorid-Verhältnis von 122 gefunden. Der organische Ligand liegt als neutrales Molekül vor. Die Spektren deuten auf eine polymère Struktur hin, in der die Kupfer(II)-Ionen in einer verzerrten oktaedrischen Koordination vorliegen. Die thermischen Zersetzungen verlaufen über die Reduktion von Cu(II) zu Cu(I) und die Umwandlung des verbleibenden organischen Liganden in Säureamid, wie für Dihydrogen-bis(pyridin-2-aldoxim)-kupfer(II)-chlorid gefunden wurde, aber die Temperaturen des Beginns der Zersetzung und damit die thermische Stabilität steigen in der Reihenfolge [Cu(Py₄-CHNOH)₂Cl₂][Cu(Py₃-CHNOH)₂Cl₂]>[Cu(Py₂-CHNOH)₂]Cl₂ etwas an.

---

(, ) ( ) 3- 4- . 122, . , . -( -2-)- . , , , : Cu(4-Py-CHNOH)₂Cl₂Cu(3-Py-CHNOH)₂Cl₂>Cu(2-Py-CHNOH)₂Cl₂.