Mean‐field theoretical analysis of brush‐coated nanoparticle dispersion in polymer matrices

The equilibrium dispersion of nanoparticles with grafted polymer chains into polymer matrices, of the same chemical structure as the brush, is studied through the device of mean‐field theory. Our results show that the disperion of brush‐coated nanoparticles into a matrix polymer is improved with (i) decreasing particle radius and (ii) increasing brush chain length. Both of these aspects can be understood based on the fact that, unlike the case of planar surfaces, homopolymer chains end‐grafted to spherical nanoparticle surfaces tangentially spread away from the surface thus alleviating the packing frustration that is created by the relatively high grafting densities. This permits significant brush/matrix overlap, even at high grafting densities, a regime that has only recently become experimentally available due to advances in polymer synthesis (i.e., the “grafting‐to” methods). © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 351–358, 2008     

Random photografting of polymers to nanoparticles for well-dispersed nanocomposites

A simple method to achieve dispersion of nanoparticles (NPs) within polymer matrices by solution-state photografting of benzophenone (BP)-containing random copolymers is presented. A benzyl ether ligand that stabilizes NPs in solution while possessing selectivity toward hydrogen abstraction and subsequent coupling with BP was designed. This method for introducing grafts by ultraviolet (UV) light exposure affords control over the dispersion state in the resulting polymer films, as revealed by transmission electron microscopy and UV–visible spectroscopy. The evolution of the hydrodynamic sizes of particles as a function of UV dose suggests that the polymers “wrap” particles by forming multiple attachment points per chain because of the relatively rapid kinetics for the formation of subsequent attachments following the first grafting event for a given chain. In addition, the presence of unreacted BP groups allows for photolithographic patterning of well-dispersed nanocomposite films. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 152–158     

Synthesis of highly dispersed,block copolymer‐grafted TiO2 nanoparticles within neat block copolymer films

The objective of the study is to formulate exclusive block copolymer (BCP) nanocomposites by dispersing bcp end‐grafted nanoparticles (bcp‐g‐nps) of PMMA‐b‐PS‐g‐TiO₂ within PS‐b‐PMMA matrix. PMMA‐b‐PS‐g‐TiO₂ is synthesized using a “grafting‐to” approach and characterized by XPS and TGA to establish that the copolymer chains were bonded to NPs. Good dispersion of bcp‐g‐nps in PMMA and PS‐PMMA bcp films is observed, in contrast to poor dispersion in PS films. In PS‐PMMA films, the compatible and identical bcp nature of the end‐grafted polymer, and large NP size caused it to span across entire PS‐PMMA domains. Poor and good dispersion in PS and PMMA matrices, respectively, can be rationalized by the fact that NPs interactions are driven by the PMMA at the outer corona of the bcp‐g‐nps. Developing bcp‐g‐nps as a strategic route to preparation of highly dispersed high permittivity NPs like titanium dioxide (TiO₂) in bcp matrix can have important ramifications for energy storage devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 468–478     

Progress in controlled polymerization and design of novel polymer architectures

Recent developments of new synthetic methods are stimulating the design of new polymers. Modern generations of highly active and selective transition metal catalysts give excellent control on molecular weight, regio- and stereoregularities, long- and short-chain-branching, polymer crystallization, and morphology of olefin, diene, cyclolefin, and styrene polymers. Ethene is copolymerized with polar comonomers such as carbon monoxide and acrylates in new low pressure processes. Catalytic coupling reactions of aromatic halogen compounds and bisphenols afford rigid polyarylenes. „Living” radical polymerization (“TEMPO” and “ATRP”) produce a wide range of telechelics, block copolymers and cascade macromolecules. In reactive processing oxazoline-mediated coupling reactions are the key to melt diversification of well-known polymers. Supramolecular concepts are being applied to tailor hybrid polymers and nanocomposites. Precision in polymer synthesis is the key to new materials with wide application range.     

Polymer Zwitterions for Stabilization of CsPbBr3 Perovskite Nanoparticles and Nanocomposite Films

Functional polymers with sulfobetaine or phosphorylcholine zwitterions as pendent groups are demonstrated as both ligands and host matrices for CsPbBr₃ perovskite nanoparticles (PNPs). These polymers produce nanocomposite films with excellent NP dispersion, optical transparency, and impressive resistance to NP degradation upon exposure to water. Multidentate interactions of the zwitterion‐containing copolymers with the PNPs induce dispersed or weakly aggregated nanocomposite morphologies, depending on the extent of zwitterionic functionality in the polymer. Incorporating additional functionality into the polymers, such as benzophenone pendent groups, yields lithographically patternable films, while time‐resolved photoluminescence measurements provide insight into the electronic impact of PNPs in zwitterionic polymer matrices.     

Self‐assembly of amphiphilic tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers

Amphiphilic tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers consisting of one polystyrene block and two poly(N‐isopropylacrylamide) blocks were prepared by the “arm‐first” method in which RAFT polymerization and nonconvalent ligand–metal complexation were employed. The prepared amphiphilic star‐shaped metallopolymers are able to form micelles in water. The size and distribution of the micelles were studied by dynamic light scattering and transmission electron microscopy techniques. Preliminary studies indicate that the polymer concentration and the hydrophilic poly(N‐isopropylacrylamide) block length can affect the morphologies of the formed metal‐interfaced core–shell micelles in water. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4204–4210, 2007     

Block polymers of isocyanates and vinyl monomers by homogeneous anionic polymerization

The “living” polymer method was used to prepare block polymers of vinyl monomers and isocyanates at low temperatures in toluene–tetrahydrofuran mixtures. Vinyl monomers and diisocyanates, which have one hindered isocyanate group, as in 2,4-toluene diisocyanate, form block polymers which contain pendant reactive isocyanate groups. These block polymers can be crosslinked with water, diols, diamines, etc. The polymerization is apparently limited to block polymer formation, since the polyisocyanate anion is incapable of initiating the polymerization of common vinyl monomers.     

Convenient Pd‐Catalyzed Synthesis of Large Unimolecular Star Polyethylene Nanoparticles

A simplistic convenient “arm‐first” catalytic synthesis method is demonstrated to render soft unimolecular star polyethylene nanoparticles. Low‐dispersity polyethylene arms of controllable length and topology are first synthesized via Pd‐catalyzed “living” ethylene poly­merization. The subsequent addition of norbornadiene as a unique cross‐linker renders the block polymer containing a short polynorbornadiene (PNBD) sequence. Efficient and rapid catalytic cross‐linking of the PNBD sequences occurs in the polymer precipitation and drying steps to give rise to star polyethylene nanoparticles. The star polymers are featured with tunable arm length and topology, high molecular weight (as high as 1770 kg mol⁻¹), high arm numbers (as high as 88), and desirable average nano­particle size (29−72 nm).

     

Optimization of bioreducible micelles self‐assembled from amphiphilic hyperbranched block copolymers for drug delivery

Dendritic polymers‐based unimolecular micelles with enhanced stability are attractive carriers. However, the preparation of dendrimers or dendrons with higher generation remains substantially synthetic challenge due to the increased steric hindrance, multistep and tedious preparation, and low yields. The adoption of Boltorn H40, a commercially available dendritic polymer of Boltorn family containing multiple hydroxyl groups with various functionalities as a dendrimer‐based starting core template for the generation of hyperbranched polymers, offers a straightforward solution to address this problem. To develop universal strategies toward H40‐based amphiphilic block copolymers, the “grafting from” and “grafting to” approaches were both applied in this study. The reduction‐insensitive block copolymers, H40‐b‐poly(ɛ‐caprolactone)‐b‐poly(oligo(ethylene glycol) monomethyl ether methacrylate) (H40‐b‐PCL‐b‐POEGMA), were synthesized by “grafting from” including sequential ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The core structure and the polymer composition of the nonreducible amphiphilic hyperbranched block copolymers were optimized toward better properties and performance for drug delivery applications, and H40‐PCL₁₅‐b‐POEGMA₂₃ was screened as the best polymer construct relative to H20‐PCL₁₅‐b‐POEGMA₂₃ and H40‐PCL₁₅‐b‐POEGMA₃₂ in terms of micelle stability and drug loading capacity. Therefore, the reducible H40‐b‐PCL‐SS‐POEGMA with an identical core and polymer composition to that of H40‐PCL₁₅‐b‐POEGMA₂₃ was further prepared by “grafting to” using click coupling between H40‐PCL‐azide and P(OEGMA)‐alkyne. The delivery efficacy evaluated by an in vitro cytotoxicity study revealed that the resulting DOX‐loaded reducible micelles of H40‐PCL₁₅‐SS‐POEGMA₂₃ produced greater cytotoxicity in cancer cells than in normal cells and macrophages, therefore, are promising carriers for anticancer drug delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1383–1394     

Degradable star polymers with high “click” functionality

Degradable polyester‐based star polymers with a high level of functionality in the arms were synthesized via the “arms first” approach using an acetylene‐functional block copolymer macroinitiator. This was achieved by using 2‐hydroxyethyl 2′‐methyl‐2′‐bromopropionate to initiate the ring‐opening polymerization (ROP) of caprolactone monomer followed by an atom transfer radical polymerization (ATRP) of a protected acetylene monomer, (trimethylsilyl)propargyl methacrylate. The hydroxyl end‐group of the resulting block copolymer macroinitiator was subsequently crosslinked under ROP conditions using a bislactone monomer, 4,4′‐bioxepanyl‐7,7′‐dione, to generate a degradable core crosslinked star (CCS) polymer with protected acetylene groups in the corona. The trimethylsilyl‐protecting groups were removed to generate a CCS polymer with an average of 1850 pendent acetylene groups located in the outer block segment of the arms. The increased functionality of this CCS polymer was demonstrated by attaching azide‐functionalized linear polystyrene via a copper (I)‐catalyzed cycloaddition reaction between the azide and acetylene groups. This resulted in a CCS polymer with “brush‐like” arm structures, the grafted segment of which could be liberated via hydrolysis of the polyester star structure to generate molecular brushes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1485–1498, 2009     

Fabrication of well‐defined shape memory graft polymers derived from biomass: An insight into the effect of side chain architecture on shape memory properties

Fully sustainable shape memory polymers (SMPs) derived from ethyl cellulose (EC, derived from cellulose), tetrahydrofurfuryl methacrylate (THFMA, derived from furfural), and lauryl methacrylate (LMA, derived from fatty acids) were prepared via “grafting from” atom transfer radical polymer (ATRP). The “grafting from” ATRP strategy allows to fabricate SMPs with EC as a backbone, and LMA and THFMA copolymer as a side chain. By utilizing the one‐pot and sequential monomer addition approach, two types of SMPs with random/semi‐block side chain architectures were obtained, respectively. Random/semi‐block side chain architecture of SMPs was confirmed by DSC, DMA, SAXS, and TEM. The presence of microphase separation in the SMPs with semi‐block side chain architecture provided two distinct thermal transitions, which was needed for triple‐shape memory behavior. Shape memory study showed that SMPs with semi‐block side chain architecture exhibited excellent triple‐shape memory property, and also had higher shape recovery speed and shape recovery ratio than those with random side chain architecture. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1711–1720     

Hybrid alginate beads with thermal‐responsive gates for smart drug delivery

Polysaccharide‐based thermo‐responsive material was prepared by grafting PNIPAAm onto hybrid alginate beads, in which a biomineralized polyelectrolyte layer was constructed aiming to enhance the mechanical strength and ensure higher graft efficiency. XPS results demonstrated that the incorporation of PNIPAAm to the hybrid beads was successful, and the PNIPAAm‐grafted beads were more hydrophilic than the ungrafted ones as indicated by their swelling behavior. The drug release behaviors revealed that the grafted beads were both thermo‐ and pH‐sensitive, and the PNIPAAm existed in the pores of the alginate beads acted as the “on–off” gates: the pores of the beads were covered by the stretched PNIPAAm to delay the drug release at 25°C and opened to accelerate the drug release at 37°C because of the shrinking of PNIPAAm molecules. This paper would be a useful example of grafting thermo‐responsive polymers onto biodegradable natural polymer substrate. The obtained beads provide a new mode of behavior for thermo‐responsive “smart” polysaccharide materials, which is highly attractive for targeting drug delivery system and chemical separation. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of hydrophilic networks synthesized by group transfer polymerization

Group transfer polymerization was used to synthesize several series of hydrophilic random and model networks. Cationic random networks were prepared both in bulk and in tetrahydrofuran (THF) using a monofunctional initiator and simultaneous polymerization of monomer and branch units, while a bifanctional initiator was employed in THF for the synthesis of model networks comprising basic or acidic chains. Upon polymerization of the monomer, the latter initiator gives linear polymer chains with two “living” ends, which are subsequently interconnected to a polymer network by the addition of a branch unit. Homopolymer network star polymers were also synthesized in THF by a one‐pot procedure. The synthesis involved the use of a monofunctional initiator and the four‐step addition of the following reagents: (i) monomer, to give linear homopolymers; (ii) branch unit, to form “arm‐first” star polymers; (iii) monomer, to form secondary arms and give “in‐out” star polymers; and, finally (iv) branch unit again, to interconnect the “in‐out” stars to networks. Different networks were prepared for which the degree of polymerization (DP) of the linear chains between junction points was varied systematically. For all networks synthesized, the linear segments, the “arm‐first” and the “in‐out” stars were characterized in terms of their molecular weight (MW) and molecular weight distribution (MWD) using gel permeation chromatography (GPC). The degrees of swelling of both the random and model networks in water were measured and the effects of DP, pH, and monomer type were investigated.     

Synthesis of high‐order multiblock core cross‐linked star polymers

Core cross‐linked star (CCS) polymers with radiating arms composed of high‐order multiblock copolymers have been synthesized in a one‐pot system via iterative copper‐mediated radical polymerization. The employed “arm‐first” technique ensures the multiblock sequence of the macroinitiator is carried through to the star structure with no arm defects. The versatility of this approach is demonstrated by the synthesis of three distinct star polymers with differing arm compositions, two with an alternating ABABAB block sequence and one with six different block units (i.e. ABCDEF). Owing to the star architecture, CCS polymers in which the arm composition consists of alternating hydrophilic–hydrophobic (ABABAB) segments undergo supramolecular self‐assembly in selective solvents, whereas linear polymers with the same block sequence did not yield self‐assembled structures, as evidenced by DLS analysis. The combination of microstructural and topological control in CCS polymers offers exciting possibilities for the development of tailor‐made nanoparticles with spatially defined regions of functionality. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 135–143     

Formation of 2D spherulites in Langmuir films of amphiphilic T-shaped liquid crystals

Langmuir films of facial T-shaped amphiphilic liquid crystals were studied at the air-water interface. The liquid crystals were composed of three incompatible segments: a central rigid rodlike p-terphenyl (TP) group, two flexible hydrophobic n-alkyl terminal chains of identical length linked through ether bonds, and one hydrophilic lateral chain of three ethylene oxide units with a carboxyl end group. In order to determine the influence of the alkyl chain length on the characteristics of condensed films three TPs having n-alkyl chains with eight (TP8/3), ten (TP10/3) or 16 (TP16/3) carbon atoms were investigated. Surface pressure - mean molecular area isotherms revealed clear differences. TP8/3 and TP10/3 exhibit an extended plateau region where a phase transition from monolayer to multilayer takes place. On the other hand, the TP16/3 isotherm showed a distinct maximum ('spike') corresponding to a surprising surface crystallization process which is reported for the first time for a Langmuir film of a liquid crystal. Brewster angle microscopy clearly confirmed these differences: TP8/3 and TP10/3 formed circular domains with liquid crystalline order, while TP16/3 formed well-defined two-dimensional polycrystalline spherulites which are fractured after further compression. The film thickness determined by X-ray reflectivity measurements correlated with a multilayer formation for TP10/3. The morphology of Langmuir-Blodgett (LB) films transferred onto silicon wafers and studied by atomic force microscopy also confirmed the striking different behavior (multilayer formation vs. 2D crystallization) of the TPs under investigation.     

Surface‐initiated atom transfer radical polymerization grafting of poly(2,2,2‐trifluoroethyl methacrylate) from flat silicon wafer surfaces

Poly(2,2,2‐trifluoroethyl methacrylate) (PTFEMA), a partially fluorinated polymer, was directly grafted from silicon wafer surfaces by a surface‐initiated atom‐transfer radical polymerization (ATRP). The polymer layer thickness increased linearly with monomer conversion and molecular weight of free polymers in solution. The thickness was mainly determined by the experimental conditions such as activator/deactivator ratio, monomer/catalyst ratio, and monomer concentration. PTFEMA layers of more than 100‐nm thick were obtained. The grafted PTFEMA chains were “living” and allowed the extension of a second block of PMMA. X‐ray photoelectron spectroscopy study showed that the chemical compositions at the surfaces agreed well with their theoretical values. A novel surface‐attachable difunctional initiator was also synthesized and applied to the grafting of PTFEMA. The grafting density was doubled using this difunctional initiator, from 0.48 to 0.86 chains/nm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1252–1262, 2006     

Building up polymer architectures on graphene oxide sheet surfaces through sequential atom transfer radical polymerization

The reactivity between the active species of atom transfer radical addition and the unsaturated groups of graphene oxides (GOs) has been demonstrated in this work. The reaction and the sequential surface‐initiated atom transfer radical polymerization provide a convenient approach to anchor various polymer chains and to buildup various polymer architectures, such as linear polymer, V‐shape block polymer, multibonded polymer layer, and hierarchical brush‐on‐layer polymer, on GO sheet surfaces. The chemical structures and morphology of the polymer‐modified GOs have been characterized with Fourier transform infrared spectroscopy, Raman spectroscopy, X‐ray photoelectron spectroscopy, and atomic force microscopy. After organomodification, the GOs exhibit a good dispersion ability in organic solvent over 80 days, amphiphilic characteristics, and temperature‐responsive properties. Reduction of the GOs has been performed to result in graphene‐like materials showing certain extent of electron conductivities. An effective approach to synthesize GO/polymer hybrid materials possessing various polymer architectures and attractive properties has been developed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1588–1596     

DNA–Polymer Nanostructures by RAFT Polymerization and Polymerization‐Induced Self‐Assembly

Nanostructures derived from amphiphilic DNA–polymer conjugates have emerged prominently due to their rich self‐assembly behavior; however, their synthesis is traditionally challenging. Here, we report a novel platform technology towards DNA–polymer nanostructures of various shapes by leveraging polymerization‐induced self‐assembly (PISA) for polymerization from single‐stranded DNA (ssDNA). A “grafting from” protocol for thermal RAFT polymerization from ssDNA under ambient conditions was developed and utilized for the synthesis of functional DNA–polymer conjugates and DNA–diblock conjugates derived from acrylates and acrylamides. Using this method, PISA was applied to manufacture isotropic and anisotropic DNA–polymer nanostructures by varying the chain length of the polymer block. The resulting nanostructures were further functionalized by hybridization with a dye‐labelled complementary ssDNA, thus establishing PISA as a powerful route towards intrinsically functional DNA–polymer nanostructures.     

Nylon–MOF Composites through Postsynthetic Polymerization

Hybridization of metal–organic frameworks (MOFs) and polymers into composites yields materials that display the exceptional properties of MOFs with the robustness of polymers. However, the realization of MOF–polymer composites requires efficient dispersion and interactions of MOF particles with polymer matrices, which remains a significant challenge. Herein, we report a simple, scalable, bench‐top approach to covalently tethered nylon–MOF polymer composite materials through an interfacial polymerization technique. The copolymerization of a modified UiO‐66‐NH₂ MOF with a growing polyamide fiber (PA‐66) during an interfacial polymerization gave hybrid materials with up to around 29 weight percent MOF. The covalent hybrid material demonstrated nearly an order of magnitude higher catalytic activity for the breakdown of a chemical warfare simulant (dimethyl‐4‐nitrophenyl phosphate, DMNP) compared to MOFs that are non‐covalently, physically entrapped in nylon, thus highlighting the importance of MOF–polymer hybridization.     

Study on luminescence characteristic of the ZnO/polymer hybrid films

The cyclohexane solution of PS (polystyrene) and the ethyl acetate solution of PMMA (polymethyl methacrylate) were used as flowing liquid; the ZnO/polymer hybrid colloids were successively produced by focused pulsed laser ablation of ZnO target in interface of solid and flowing liquid. As solvent in the hybrid colloids has volatized, the ZnO/polymer hybrid films were obtained. The hybrid colloids were characterized by high-resolution transmission electron microscopy (HRTEM) and select-area electron diffraction (SEAD). The results show a good dispersion of the ZnO nanoparticles in the polymer matrix. The hybrid films were characterized by fluorescence spectrum, Fourier transform infrared spectroscopy (FTIR) spectroscopy, thermogravimetry with FTIR (TG/FTIR), and X-ray photoelectron spectrum. The results show the ZnO/polymer hybrid films can radiate strong blue light under ultraviolet. Meanwhile, the ZnO/polymer hybrid films have higher chemical stability than ZnO nanoparticles because nano-ZnO nanoparticles were enwrapped by polymers. In addition, the ZnO hybrid films have higher thermal stability then the related pure polymers because of strong interaction among ZnO nanoparticles and polymers.