Regularities of binary condensation of vapors when one of them is undersaturated

Simple analytical expressions are derived for the stationary concentration of a binary solution in a markedly supercritical droplet growing exothermically in diffusion or free-molecular regimes in mixed vapors when one of condensing vapors is supersaturated and present in a small amount and another vapor is slightly undersaturated and present in a large amount. The condensation of sulfuric acid and water vapors on a droplet under the conditions of Earth atmosphere is considered as an example of practical importance. Under isothermic conditions, analytical expressions are obtained for the time of establishing a power law for variations in a droplet radius with time under the diffusion and free-molecular regimes of the droplet growth. The power laws are derived in an explicit form under these regimes, which describe the rapid establishment of a stationary concentration of a solution in a growing droplet.     

A study of the long-term strength of repair bandages made of composite rings of unidirectional structure

The interference stress relaxation in a composite repair bandage formed on a cylindrical metal surface was studied. The creep of a repair ring bandage under the action of interference stresses was evaluated. The results of the calculation of the creep and the interference stress relaxation of a composite ring on a sample made of a segment of a metal pipe in time are presented.     

Roseophilin的合成研究进展

Roseophilin是一种从灰绿链霉菌中分离出来的、由一个十三元大环并一个杂环组成的具有抗肿瘤活性的新型抗生素的活性物质。Roseophilin独特的结构及活性引起了很多学者对其合成的兴趣。通过十三元大环和杂环合成Roseophilin,其中十三元大环的主要合成方法有末端双键的RCM关环、扩环、烷基化关环三种反应类型。     

Chemical investigation of biomass of a culture of ginseng cells III. Polysaccharides of a callus culture of ginseng

A water-soluble polysaccharide fraction has been isolated from a callus culture of ginseng with a yield of 16–20%. It has been shown that it included starch a and acidic polysaccharides — arabinogalactans and a xyloglucan.     

Effect of the sequence of the introduction of foreign substances on the action of papain

Summary In general, aniline, aniline hydrochloride, aniline sulfate, and triethylamine act as inhibitors in the hydrolysis of casein or of a suspension of flour from grain of Cicer arietinum by means of papain. The order in which the enzyme and the substrate is added to the inhibitor often has a significant effect. As a rule, there is a greater retardation when the enzyme is added last to a complex of the substrate and the inhibitor.     

Influence of the morphology of samples in the pyrolysis of PVC

PVC was used as a model substance to study the dependence of thermal measurement data on the preparation and morphological characteristics of samples The PVC treated was a commercially available suspension polymer, Ongrovil S 155, produced by the Borsodi Vegyi Kombinát. The whole thermal process was followed by TG and DTG measurements in air and argon atmospheres by means of a Du Pont 990 Thermoanalyzer. Evolved-gas analysis was performed with a home-made apparatus. Pyrolysis gas chromatography was accomplished using a Hamilton type pyrolyzer and a Carlo Erba Chromatograph furnished with a flame ionization detector. The investigations showed benzene and other components to be evolved from the initial polymer and an alteration depending on the morphological characteristics of the samples. This was suggested to be due to the different mechanisms of thermal degradation of the PVC.     

Modification of the pitch of chiral nematic liquid crystals by means of photoisomerization of chiral dopants

New photoisomerizable chiral dopants have been studied. The dopants used were menthone derivatives, a chiral stilbene derivative and a nematic copolymer of a menthone derivative and a benzoyloxybenzonitrile derivative. NMR, HPLC and UV results showed that the E-Z-isomerization of all the compounds indicated proceeded rapidly upon UV exposure, without the formation of undesired by-products. Isomerization of the menthone derivatives, including the copolymer, induced a substantial decrease in the helical twisting power. The changes in helical twisting power induced by the isomerization of the chiral stilbene derivative were limited to a factor of 2. In mixtures of the photoisomerizable dopants with commercial dopants of opposite twisting senses and a nematic host mixture, the sign of the twisting sense could be reversed by illuminating the mixture with UV light. The viewing angle dependence of irradiated regions of a 90 -twisted nematic cell was rotated 90 with respect to the viewing angle dependence of the non-irradiated regions. It is expected that this approach may be useful in the preparation of dual domain TN cells with a reduced viewing angle dependence.     

Stereoselective synthesis of analogs of the macrolactone of isomigrastatin

An approach for the highly stereoselective synthesis of analogs of the macrolactone of isomigrastatin is described. Our optimized strategy is based on a very efficient lactone opening, a Wittig olefination reaction and a ring closing metathesis. The syntheses were accomplished in 10–11 steps and good overall yields.     

Unprecedented Halogenation of Biginelli Compounds of Salicyldehyde

Unprecedented results are obtained from bromination of the normal/non-bridged and abnormal/bridged Biginelli compound of salicyldehyde. Bromination with 2,4,4,6-tetrabromocyclohexa-2,5-dienone yields a bridged monobromo-derivative and a bridged dibromo-derivative, respectively, whereas bromination with bromine and acetic acid gives a mixture of those two products in each case. Bromination with N-bromosuccinimide gives a third product, namely a tribromo-derivative, in addition to those two products. Iodination of both the substrates using iodine monochloride (Wijs solution) furnishes a bridged monoiodo-derivative only.     

Influence of the stereochemistry of sugars on the selectivity of formation of carbohydrate-derived cyclopentadienyl and indenyl ligands

Interaction of lithium cyclopentadienide with a suitable partially protected alpha-D-allofuranose triflate, 4, epimer at C3 of glucose, gives as a major product, besides the expected glucose-cyclopentadiene, 5, a glucose-disubstituted cyclopentadiene, 6. This unprecedented behaviour, which does not occur with alpha-D-glucofuranose and other sugars, is tentatively explained by a complexation of LiCp and the oxygen atoms of the isopropylidene function of one molecule of 4 and one of 5, giving a termolecular structure as the result of a template effect. The results of other experiments, such as the use of MgCp2 in place of LiCp or the complexation of oxygen atoms by lithium triflate, which changed the selectivity of the reaction largely in favour of the monosubstitution product 5, support this hypothesis. When lithium indenide is reacted with 4, glucose-monosubstituted and glucose-disubstituted indenes, 8 and 9, respectively, are formed, and 9 is obtained with almost total diastereoselectivity. This result can also be rationalised by a stereoselective complexation of lithium, as shown by separate experiments and by molecular mechanics calculations. Methyltricarbonyl molybdenum(II) complexes have been synthesised and characterised from glucose-monosubstituted 5 and glucose-disubstituted 6 cyclopentadienes.     

The evolution of nonequilibrium laser plasma of metals with the formation of structures

Processes in a plasma formed by the evaporation of material by middle power laser radiation on a metallic surface are analyzed. In the regime considered the laser radiation is not absorbed by a metallic plasma and the radiation energy is spent in the main for the atomic evaporation. As a result of the plasma relaxation, hard metallic particles of sizes of the order of 10 nm are formed. They are joined in fractal aggregates of micron sizes, and fractal aggregates may be joined in aerogel-like structures of centimeters sizes. Such a laserplasma is an example of a plasma whose evolution leads to fractal object formation. A fireball is considered as a fractal object formed as a result of the evolution of an evaporated plasma. The considered object with aerogel-like structure that is formed in a gas has both scientific and practical interest.     

New Algorithm of Spectral Analysis of Elements in Presence of Matrix Interferences

Abstract

This work suggests a new algorithm for the elemental analysis, which permits taking into account both the multiplicative and additive matrix effects, a matrix composition being unknown. The use of this algorithm in the development of analysis techniques at any set of objects may appear to be successful at arbitrarily selected measurement conditions. The basis of the algorithm consists of a combination of pattern recognition and standard addition technique (PRSA). The main concept of PRSA is to predict a function approximating satisfactorily a calibration dependence for a specific object and then to determine an unknown concentration using a nonlinear addition technique, all the aforementioned being based on easily obtained information on an analyzed object and measurement conditions. The abilities of the proposed algorithm were demonstrated by the example of strontium determination by the flame atomic absorption spectrometry in superconducting systems.     

Fast evaporation of spreading droplets of colloidal suspensions

When a coffee droplet dries on a countertop, a dark ring of coffee solute is left behind, a phenomenon often referred to as the coffee-ring effect. A closely related yet less-well-explored phenomenon is the formation of a layer of particles, or skin, at the surface of the droplet during drying. In this work, we explore the behavior of a mathematical model that can qualitatively describe both phenomena. We consider a thin axisymmetric droplet of a colloidal suspension on a horizontal substrate undergoing spreading and evaporation. In contrast to prior work, precursor films (rather than pinned contact lines) are present at the droplet edge, and evaporation is assumed to be limited by how quickly molecules can transfer out of the liquid phase (rather than by how quickly they can diffuse through the gas phase). The lubrication approximation is applied to simplify the mass and momentum conservation equations, and the colloidal particles are allowed to influence the droplet rheology through their effect on the viscosity. By describing the transport of the colloidal particles with the full convection-diffusion equation, we are able to capture depthwise gradients in particle concentration and thus describe skin formation, a feature neglected in prior models of droplet evaporation. The highly coupled model equations are solved for a range of problem parameters using a finite-difference scheme based on a moving overset grid. The presence of evaporation and a large particle Peclet number leads to the accumulation of particles at the liquid-air interface. Whereas capillarity creates a flow that drives particles to the droplet edge to produce a coffee ring, Marangoni flows can compete with this and promote skin formation. Increases in viscosity due to particle concentration slow down droplet dynamics and can lead to a reduction in the spreading rate.     

Mode of oxidations of organosulfur compounds: Example of nucleophilic oxygenations of thiolsulfinates

Two types of oxygenative oxidations (Nucleophilic and Electrophilic Oxidations) of sulfur atom are proposed and a typical mode of nucleophilic oxidation is shown with a few unsymmetrical thiolsulfinates.     

Study of the mechanism of formation of transparent polyacrylonitrile

The kinetics of bulk polymerization of acrylonitrile, leading to a transparent polymer, was studied. The reaction was followed by a dilatometer specially designed for high degrees of conversion and for continuous supply of monomer during the reaction. The last stages of polymerization were followed by density determinations. It was found that the kinetic scheme did not show any irregularities, and that the major condition for obtaining a transparent polymer is a continuous supply of monomer to fill up the gaps formed by the contraction during the polymerization process.     

Dissipative crystallization of aqueous solutions of hydroxypropyl cellulose

Drying dissipative structures of aqueous solutions of hydroxypropyl cellulose, their viscosities of 2 wt.% solutions ranging from 2 to 2,000 mPa.s were studied on a cover glass, a watch glass, and a Petri glass dish. The thickness profile of the dried film shows the coexistence of a low round hill and a high broad ring on a cover glass. The broad ring size increased as molecular weight and/or concentration of the polymers increased on a cover glass and a watch glass. Microscopic drying crystal patterns of HPC changed as a function of the distance from the film center, which is one of the typical results of the dissipative crystallization. Rod-like microscopic drying patterns originated in the cholesteric liquid crystalline structures were observed. The rods oriented mainly parallel and in some case perpendicularly to the radial direction of the dried film except the central area, where the rods distributed at random. These orientation effects were significant for low molecular weight samples and in a watch glass.     

Determination of the Crystal Structure of a New Polymorph of Theophylline

A new approach to crystal structure determination, combining crystal structure prediction and transmission electron microscopy, was used to identify a potential new crystal phase of the pharmaceutical compound theophylline. The crystal structure was determined despite the new polymorph occurring as a minor component in a mixture with Form II of theophylline, at a concentration below the limits of detection of analytical methods routinely used for pharmaceutical characterisation. Detection and characterisation of crystallites of this new form were achieved with transmission electron microscopy, exploiting the combination of high magnification imaging and electron diffraction measurements. A plausible crystal structure was identified by indexing experimental electron‐diffraction patterns from a single crystallite of the new polymorph against a reference set of putative crystal structures of theophylline generated by global lattice energy minimisation calculations.     

A thermodynamic interpretation of optimum conditions of the separation of mixture components by distillation of dilute solutions

A condition for the maximum thermodynamic efficiency of distillation of dilute solutions in a multistep cascade was obtained from the condition of a maximum change in the entropy of a mixture. These conditions were shown to correspond to a maximum degree of separation of mixture components. A thermodynamic equation was derived to describe the relation between a decrease in the Gibbs energy and the mixture value increment during distillation of a dilute ideal solution.