Interaction of a supersonic flow with a transverse jet injected through a circular aperture in a plate

A flow pattern created by the interaction of a supersonic flow with a transverse sonic or supersonic jet injected normally to the direction of the main flow through a circular aperture in a plate is considered. The pressure rises in front of the jet owing to the retarding action of the incident flow. The boundary layer building up on the wall in front of the injection nozzle is accordingly detached. The flow pattern in the region of interaction between the jet and the external flow is illustrated in Fig. 1. The three-dimensional zone of detachment thus formed deflects the incident flow from the wall, and in front of the jet a complicated system of sharp jumps in contraction develops. A three-dimensional system of jumps also develops in the jet itself.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No, 5, pp. 193–197, September–October, 1970.     

On a Paradox in the Motion of a Rigid Particle along a Wall in a Fluid

The results of an experimental investigation of spherical particles with different surface roughnesses rolling under their own weight down an inclined pipe wall in a Newtonian fluid at low Reynolds numbers, both with (friction should be taken into account) and without contact with the wall, are presented. It is shown that a fixed particle moves differently in different fluids with similar viscosities and densities. This fact, as well as the possibility of particle motion without contact with the wall, cannot be explained within the framework of the usual hydrodynamic theories. An example is the dependence of the particle motion on the static pressure.     

Simulation by a source of a thin jet from a body

An exact analytic solution is found to the following plane hydrodynamic problem. An unbounded flow of an ideal incompressible fluid flows around a plate BB' placed at right angles to the velocity vector of the flow at infinity. The pressure on the free boundary P is equal to the pressure in the flow. From an opening in the center of the plate, a jet with flow rate Q from a cavity with pressure P₀ encounters the flow head-on. As a result of the solution, it is found that for fixed width of the opening the values of Q allowed by the scheme are limited. In the limiting case Q = 0 Chaplygin's flow is obtained with stagnation region at the front [1], and in the limiting case Q = Q_max a jet out of a cavity with pressure P₀ into a cavity with pressure P. As Q varies in this interval, the total drag, regarded as the drag of the plate and the chamber from which the jet emerges, takes a minimal value at a certain point. If the width of the opening tends to the length of the slab, the problem of the collision of two jets is obtained; if the width of the opening tends to zero (Q o), the problem of jet flow past a slab with a source is obtained. It is shown that the replacement of the jet by the source gives a good approximation in both the sense of the force characteristics and in the sense of the behavior of the free streamlines.Translated from Izvestiya Akademii Nauk SSSR, Hekhanika Shidkosti i Gaza, No. 5, pp. 47–54, September–October, 1979.We thank L. I. Sedov for his interest in the work and G. Yu. Stepanov for proposing the method of solution and for a helpful discussion.     

Torsion problems for a cylinder with a rectangular hole and a rectangular cylinder with a crack

Using the method of singular integral equation and the crack-cutting technique, the rigorous solutions are obtained for a cylinder with a rectangular hole and a rectangular cylinder with a crack, which exactly satisfy the boundary conditions and the conditions at the corner points. After that the torsional rigidities and the stress intensity factors at the crack tip are determined. Next, for the doubly connected circular cylinder with a rectangular hole the expressions for the singular stresses around the concave corner points are derived and the generalized stress intensity factors are then defined. Since the crack-cutting technique is used in this paper, the solution of the matching rectangular cylinder is also obtained and its numerical results coincide with those in references. Thus the method proposed here is verified. The project supported by National Natural Science Foundation of China     

Force Action of a Body with a Permeable Boundary on a Wall in a Fluid

The ideal fluid flow due to fluid penetration through the boundary of an infinitely long solid cylinder in contact with a solid wall is determined. A formula is derived according to which the force exerted by a finite-length part of the cylinder on the wall is directed into the wall and can thus have an arbitrarily large absolute value. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 1, pp. 82–84, January–February, 2006.     

Interaction of a screw dislocation with a notch in a piezoelectric bi-material

Summary The electro-elastic interaction of a screw dislocation and a notch in a piezoelectric bi-material is analyzed. The electro-elastic fields induced by the dislocation are derived using the conformal mapping and the image-dislocation approach, where the solution for a piezoelectric bi-material without a notch is used as a base. The stress and the electric displacement intensity factors of the notch and the image force on the dislocation are given explicitly. We find that intensity factors are expressed in terms of the effective material constants, while the radial component of the image force is independent of the notch angle and the angular position of the dislocation in the polar coordinate system. Numerical results for the image force are provided for the use when one of the two media is purely elastic. They illustrate the behavior of the dislocation in the neighborhood of the notch.     

Motion of a load over a floating sheet in a variable-depth pool

A straightline unsteady motion of a load over a floating elastic sheet in a pool whose depth changes in the direction of load motion is studied. The influence of the pool depth, sheet thickness, load size and intensity, and velocity of uniform motion on the amplitude and maximum deflection of the sheet is analyzed.     

Ignition of a gas in a boundary layer at a heated plate

The problem of the ignition of a moving homogeneous gaseous combustible mixture in a boundary layer along a heated flat semiinfinite plate is one of the main problems of the ignition of a combustible mixture in a flow (for example, [1]). The formulation of the problem includes the two-dimensional equations of motion and the equations of the transfer of heat and of the reacting substance, written taking a chemical reaction into consideration, as well as boundary conditions, and should lead to determination of the steady-state fields of the concentration and the temperature and, by the same token, of the position of the combustion zone. Different approximate numerical solutions of the problem were analyzed in [1–5]. One of the most important characteristics of the process is the length of the ignition, i.e., the distance from the edge of the plate to the point at which, thanks to the intrinsic chemical heat evolution in the gas, the heat flux from the plate to the gas becomes equal to zero. In the present work, for the case of large values of the activation energy of the chemical reaction and a sufficiently great temperature difference between the wall and the flow, an approximate expression is obtained for the length of the ignition.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 142–148, September–October, 1977.The authors thank V. M. Shevtsov for his aid in making the calculations.     

Dynamics of a vapor shell around a heated particle in a liquid

The dynamics and heat and mass exchange of a vapor bubble containing a heated particle is studied in relation to the problem of vapor explosions. It is shown that the process involves two stages: dynamic stage and thermal stage. The dynamic stage is characterized by pressure fluctuations and a rapid increase in the thickness of the vapor layer. It is shown that the simplifying assumptions of the constancy of assumptions of constant heat conductivity of the vapor and linear temperature profile in the vapor layer lead to qualitatively incorrect results. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 4, pp. 69–78, July–August, 2007     

On the interaction between a dislocation and a crack in a material with a nonlinear stress-strain law

The problem of the interaction of a crack and a dislocation in a medium with a nonlinear stress-strain law is considered for the case of a semi-infinite crack in a displacement loaded strip under longitudinal shear deformation. A power law stress-strain relation is considered and the dislocation is assumed positioned so that the net effect of its interaction with the crack is to produce a zero stress intensity factor when combined with the effect of the applied displacements. Thus the Atkinson-Kay superdislocation model of a relaxed crack tip is extended to the situation where the material satisfies a power-law stress-strain relationship.     

Unsteady-state filtration of a liquid in a fractured-porous stratum to a well with a hemispherical end-face

A study is made of the motion of a liquid toward a well with a hemispherical end-face with unsteady-state spherical-radial filtration in a fractured-porous stratum consisting of hemispherical regions with different values of the permeability of the system of cracks, superposed one on another. A Laplace transform is used to find exact solutions to the problem of the lowering of the stratum pressure as a function of time and distance as well as of the output of a well working with a constant end-face pressure. The article discusses partial cases corresponding to the exploitation of closed and bounded open fractured-porous strata by a central well with a hemispherical end-face. On the basis of numerical calculations, the effect of the parameters of fractured-porous strata on the change in the indices of the process of their exploitation is established. It is established that, with the exploitation of fractured-porous strata, the process of the lowering of the end-face pressure of the well and its output become stabilized with sufficiently large values of the time.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 115–123, November–December, 1973.     

Liquid flow in a gap between a cylinder and a wall in motion

The results of an experimental investigation and calculations of the location of the minimum pressure point are presented for the case, when a cylindrical body moves along a wall in the presence of a small gap. The pressure on the cylindrical body surface is measured in the confusor and diffuser regions. It is shown that with decrease in the gap the minimum pressure point is displaced toward the minimum gap line, with increase in the pressure drop. An increase in the velocity of the motion at a constant gap leads only to a pressure increase in the diffuser region, while the location of the minimum pressure point remains the same. It is established that an increase in the inner cylinder radius moves the minimum pressure location away from the minimum gap line. The formation of two return flow regions in the confusor and diffuser regions near the cylindrical surface is detected. It is shown that the return flow in the pressure drop region reaches the stage of incipient cavitation bubbles. The results obtained can be useful in lubrication theory, as well as in medicine and biology.     

Eigenoscillations near a plate in a channel

Acoustic eigenoscillations of a gas near a plate in a rectangular channel, i.e., the eigenfrequency of oscillations as a function of the chord length and the position of the plate in the channel, and the form of the eigenfunctions are studied in a two-dimensional formulation. A mathematical model of eigenoscillations near a plate in a channel has been proposed and substantiated, and the dependence of the eigenfrequency of oscillations on the geometric parameters is studied numerically with the use of this model. Lavrent'ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 39, No. 2, pp. 78–90, March–April, 1998.     

Motion of a slender body in a fluid under a floating plate

This paper studies the three-dimensional unsteady problem of the hydroelastic behavior of a floating infinite plate under the impact of waves generated by horizontal rectilinear motion of a slender solid in a fluid of infinite depth. An analytic solution of the problem is found based on the known solutions for the unsteady motion of a point source of mass in a fluid of infinite depth under a floating plate. Asymptotic formulas are obtained which model the motion of a solid slender body in a fluid by replacing the body with a source-sink system. These formulas are used to numerically analyze the effect of plate thickness, depth of the body, its dimensions and the velocity of rectilinear motion on the amplitude of deflection of the floating plate. The motion of a submarine under a nonbreakable plate was modeled experimentally. Theoretical and experimental data are in good agreement.     

Growth of a new phase in a substance in a metastable state

A model of kinetics of phase transitions in a substance in a metastable state is proposed, where the probability of extensive nucleation owing to homogeneous mechanisms is rather large; the model is an alternative to Kolmogorov’s model. The use of this model is demonstrated to offer analytical solutions that describe both the crystallization processes with similar densities of the liquid and solid phases and, for instance, the kinetics of nucleation and growth of bubbles in surface boiling. Solutions obtained by Kolmogorov’s model and by the present model coincide at the initial stage of the process where the volume fraction of the new phase is small. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 2, pp. 75–80, March–April, 2007.     

Stability in a case of motion of a paraboloid over a plane

We solve a nonlinear orbital stability problem for a periodic motion of a homogeneous paraboloid of revolution over an immovable horizontal plane in a homogeneous gravity field. The plane is assumed to be absolutely smooth, and the body–plane collisions are assumed to be absolutely elastic. In the unperturbed motion, the symmetry axis of the body is vertical, and the body itself is in translational motion with periodic collisions with the plane.The Poincare´ section surfacemethod is used to reduce the problemto studying the stability of a fixed point of an area-preserving mapping of the plane into itself. The stability and instability conditions are obtained for all admissible values of the problem parameters.     

Mixing of a supersonic stream and a transverse jet injected through a circular hole in a plate

An experimental investigation is conducted of the propagation and mixing of a transverse sonic jet injected into a supersonic gas stream through a circular hole in a plate. The picture of the interaction at the initial section of the injected jet is examined in the majority of papers devoted to this question [1–3]. The aim of this paper is to investigate the mixing of the injected jet with the free stream, and to establish criteria governing the jet insertion and mixing processes.     

Transformation of a breaking wave at a drop of a channel bottom

This paper gives results of an experimental study of incident and reflected waves of the bore type in the neighborhood of a sharp change in the channel bed level. It is shown that under conditions typical of accidents at ship locks, the wave height can reach 8 m.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 2, pp. 115–121, March–April, 2005.     

Impact of a body with a plane bottom on a thin liquid layer at a small angle

The problem of the impact of a body with a plane bottom (of the type of a box) on a thin liquid layer at a small angle is solved in the two-dimensional formulation. The nonlinear shallow water equations are used, together with the method of matched asymptotic expansions. It is found that at certain values of the input parameters of the problem the liquid pressure diminishes near the lower end of the body and becomes smaller than the atmospheric pressure, which results in liquid separation from the box bottom. The numerical results show that all input parameters of the problem have a considerable effect on the nature of body motion. The liquid separation effect on body motion is analyzed.