The chemistry of zerumbone. Part 5: Structural transformation of the dimethylamine derivatives

Zerumbone (1) and its 6,7-epoxide (2) react with ammonia and dimethylamine regio- and stereospecifically, affording monoamines 3, 4, 7 and 8. All adducts have the same relative configuration at C2 and C3. The conjugate amination is thermodynamically controlled to arrive at a single diastereomer. At 15°C 7 reacts with cyanide to give aminonitrile 10 as the single product, while at 30°C, acyclic aminonitrile 11 is also formed. The reaction with 8 affords at 0°C bicyclic aminonitrile 12 of the asteriscane skeleton, while at 30°C or higher temperature, mixtures of 12 and tricyclic nitriles 13 and 13′ are obtained. Refluxing of 7, 8 and 10 in aqueous acetonitrile promotes scission of the zerumbone ring by retro-Mannich reaction to provide acyclic aldehydes 16-18, respectively. The dimethylamino group of 7, 8 and 10 is eliminated stereospecifically by Cope- and base-catalyzed eliminations to regenerate the zerumbone skeleton in the products 1, 2 and 21. Cope elimination of 12 results in a mixture of 13 and 13′ by deaminative transannular etherification.     

A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

Reaction of guaiazulene with o-formylbenzoic acid in diethyl ether (or methanol) in the presence of hexafluorophosphoric acid: comparative studies on H and C NMR spectral properties of 3-guaiazulenylmethylium- and 3-guaiazulenium-ion structures

Reaction of guaiazulene (1) with o-formylbenzoic acid (2) in diethyl ether in the presence of hexafluorophosphoric acid at 25 °C for 90 min gives the corresponding monocarbenium-ion compound, [2-(carboxy)phenyl](3-guaiazulenyl)methylium hexafluorophosphate (3), quantitatively, which upon treatment with aq NaHCO₃ leads to 3-(3-guaiazulenyl)-2-benzofuran-1(3H)-one (5) in 96% isolated yield. Similarly, reaction of 1 with 2 in methanol under the same conditions as the above reaction affords two kinds of inseparable monocarbenium-ion compounds, 3 and (3-guaiazulenyl)[2-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (4) with an equilibrium between them, which upon reaction with a solution of NaBH₄ in ethanol at 25 °C for 30 min leads to 5 in 46% isolated yield and (3-guaiazulenyl)[2-(methoxycarbonyl)phenyl]methane (6) in 37% isolated yield. Along with the ¹H and ¹³C NMR spectral properties of a solution of 5 in trifluoroacetic acid-d₁ at 25 °C, whose molecular structure is converted to a ca. 1:1 equilibrium mixture of 7 possessing a partial structure of the 3-guaiazulenylmethylium-ion and 8 possessing a partial structure of the 3-guaiazulenium-ion, comparative studies on the ¹H and ¹³C NMR spectral properties of 7 and 8 with those of the monocarbenium-ion compound, (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (A), 5, and 6 are reported. From these NMR studies, it can be inferred that the positive charge of the 3-guaiazulenylmethylium-ion part of 7 apparently is transferred to the seven-membered ring, generating a resonance form of the 3-guaiazulenylium-ion structure η′, and the same result can be inferred for the previously documented monocarbenium-ion compounds A-I. Moreover, referring to a comparative study on the C-C bond lengths of A observed by the X-ray crystallographic analysis with those of the optimized (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium-ion structure for A calculated by a WinMOPAC (Ver. 3.0) program using PM3, AM1, or MNDOD as a semiempirical Hamiltonian, the optimized [2-(carboxy)phenyl](3-guaiazulenyl)methylium-ion structure for 3 calculated using PM3 is described.     

Cyclopolymerization XXXIII. Radical polymerizations and copolymerizations of 1,6-dienes with 2-phenylallyl group and thermal properties of polymers derived therefrom

Radical polymerizations of α-allyloxymethylstyrene (1) and copolymerizations of α-(2-phenylallyloxy)methylstyrene (2) were undertaken to acquire comprehensive understanding on polymerization behavior of these dienes and to get polymers with high thermal stability and high glass transition temperature (T_g). One of the monofunctional counterparts of 1 is a derivative of α-methylstyrene, the ceiling temperature of which is low, and the other is an allyl compound that is well-known for the low homopolymerization tendency. This means that the intermolecular propagation reactions leading to pendant uncyclized units are suppressed during the polymerization of 1 to yield highly cyclized polymers. In fact, the degree of cyclization of poly(1) obtained at 140 °C attained the value 92%. Structural studies revealed that repeat cyclic units of poly(1) consist exclusively of five-membered rings. Poly(1) was found to be stable up to 300 °C, but its T_g values were detected at around 100 °C. They are considerably lower than the targeted values which should lie between 180 and 220 °C. An additional drawback of poly(1) is its low molecular weight probably due to a degradative chain transfer. For this reason, copolymerizations of 2 with 1 and with styrene were also carried out to seek for the possibility to control the thermal properties precisely. Monomer 2 was chosen, since it has been reported in our previous work that it yields polymers with thermal stability up to 300 °C and T_g higher than 250 °C. Copolymerization of 2 with styrene afforded polymers with desired thermal properties and high molecular weight.     

7-Deaza-2,8-diazaadenine containing oligonucleotides: synthesis, ring opening and base pairing of 7-halogenated nucleosides

Oligonucleotides containing 7-bromo-7-deaza-2,8-diaza-2′-deoxyadenosine (3) and 5-amino-3-bromo-4-carbamoyl-1-(2′-deoxy-β-d-erythro-pentofuranosyl)pyrazole (4) were synthesized. Compound 3 was prepared from 7-bromo-8-aza-7-deaza-2′-deoxyadenosine (5) via the 1,N⁶-etheno derivative 6 and was converted into the phosphoramidite 11. The 7-bromo substituent of 3 increases oligonucleotide duplex stability compared to the non-halogenated nucleoside. Oligonucleotides incorporating 3 are transformed to those containing 4 during long time deprotection at elevated temperature (25% aq ammonia, 60 °C, 30 h). Compound 3 forms a strong base pair with dG. The base pair stability decreases in the order dG>dT>dA>dC. Similar recognition selectivity is observed for the pyrazole nucleoside 4, however, due to decreased stacking and higher flexibility of the pyrazole moiety, duplexes are less stable than those containing 3.     

An efficient preparation and spectroscopic and electrochemical properties of quinodimethane derivatives with four 3-(methoxycarbonyl)azulen-1-yl groups

Reaction of methyl 1-azulenecarboxylate (8) with terephthalaldehyde (9) in acetic acid in the presence of hydrochloric acid at 25 °C for 2 h gives 1,4-bis[bis(3-methoxycarbonyl-1-azulenyl)methyl]benzene (12), in 93% yield, which upon oxidation with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) in dichloromethane in the presence of hexafluorophosphoric acid at 25 °C for 1 h affords the dicarbenium-ion compound 15 in 94% yield. Furthermore, reduction of 15 with zinc powder in a mixed solvent of acetonitrile and chloroform at 25 °C for 1 h yields the target quinodimethane 18 in 90% yield. Similarly, as in the case of 18, the quinoid compounds 19 and 20 can be derived from the dicarbenium-ion compounds 16 and 17, quantitatively. A facile preparation as well as spectroscopic and electrochemical properties of 15-20 is reported.     

Synthesis and structures of thieno[2,3-b]thiophene incorporated [3.3]dithiacyclophanes. Enhanced first hyperpolarizability in an unsymmetrically polarized cyclophane

Dithiacyclophanes incorporating thieno[2,3-b]thiophene have been synthesized, in order to investigate the nonlinear optical properties of donor-acceptor cyclophane 7. Cyclophane 7 displayed significantly higher first hyperpolarizability β (21.6 × 10⁻³⁰ esu) compared to model 10 (9.58 × 10⁻³⁰esu). Relatively higher β in 7 presumably arises from an extra electron redistribution arising from through-space charge transfer, a feature lacking in 10. Moreover, the thermal decomposition temperature of 7 (300 °C) is higher than that reported for the NLO prototype DANS (295 °C).     

A new approach to 2,2-disubstituted 1-(methylsulfanyl)vinyl phosphonates via an intermediate thiocarbonyl ylide

The reaction of methyl (diethylphosphoryl)dithioformate (6) with diaryldiazomethanes 7a-d in THF at −60 °C to room temperature followed by desulfurization is shown to be a convenient method for the preparation of 2,2-disubstituted 1-(methylsulfanyl)vinyl phosphonates 8a-d. The analogous reactions with 2-diazoacenaphthen-1-one (7f) or 2-diazocamphor (7g) in refluxing THF yield selectively the corresponding (Z)- and (E)-vinyl phosphonates 8f and 8g, respectively. These products can be easily oxidized to the vinylsulfoxides 13 and vinylsulfones 14. On the other hand, methyl (diethylphosphoryl)dithioformate (6) and 2-diazo-1,2-diphenylethanone (7e) in boiling THF react to give the 1,3-oxathiole 12. All these reactions occur via an intermediate thiocarbonyl ylide 11 followed by 1,3-dipolar electrocyclization and sulfur extrusion or 1,5-dipolar electrocyclization.     

A new 3-methylidenepentane-1,5-dianion synthon: synthesis of perhydropyrano[2,3-b]pyrans and 1,7-dioxaspiro[4.5]decanes

4-Phenylsulfanyl-2-(2-phenylsulfanylethyl)but-1-ene (2) has proved to be an appropriate and new 3-methylidenepentane-1,5-dianion synthon. The reaction of 2 with an excess of lithium powder and a catalytic amount of DTBB (2.5%) in the presence of a carbonyl compound in THF at 0 °C, leads, after hydrolysis, to the expected methylidenic diols 3. These diols when subjected to successive hydroboration-oxidation and final oxidation, undergo spontaneous cyclisation to furnish a series of cis-perhydropyrano[2,3-b]pyrans (4) in a highly diastereoselective manner (>99% de). Additionally, diols 3 also undergo double intramolecular iodoetherification promoted by a silver salt, to furnish the corresponding 1,7-dioxaspiro[4.5]decanes (6) in very high yields.     

Five novel norcembranoids from Sinularia leptoclados and S. parva

Three new norcembrane-based diterpenoids, leptocladolides A (1), B (4) and C (5), along with five known metabolites 6-10, have been isolated from the dichloromethane extract of a Taiwanese soft coral Sinularia leptoclados. Furthermore, a chemical investigation on the dichloromethane extract of S. parva has resulted in the isolation of two new related isomers, 1-epi-leptocladolide A (2) and 7E-leptocladolide A (3), in addition to 1 and 7. The structures of new metabolites 1-5 were elucidated on the basis of extensive spectroscopic analyses and their relative stereochemistries were determined by NOESY experiments. The new metabolites 1 and 3 have been shown to exhibit significant cytotoxic activity against KB and Hepa59T/VGH cancer cell lines.     

2,2,6,6-Tetramethylcyclohexanethione S-methylide, a highly hindered thiocarbonyl ylide: two-step cycloadditions

The switching from the concerted 1,3-dipolar cycloaddition to a two-step pathway via zwitterionic intermediates requires a major energy difference between HOMO-LUMO energies of 1,3-dipole and dipolarophile, as well as sterically demanding reactants. In contrast to previously studied models, the title compound 1C, a thiocarbonyl ylide prepared by N₂ extrusion from dihydrothiadiazole 7C at 80 °C, combined with 2,3-bis(trifluoromethyl)fumaronitrile (11) to give a zwitterion (gauche-10); the latter failed to close the thiolane ring by 1,5-cyclization, but formed the seven-membered ketene imine 9C by 1,7-cyclization. X-ray analysis of 9C revealed an angle-deformed cumulated bond system and a transoid relation of the CF₃ groups. The relatively stable 9C allowed ¹⁹F NMR recordings from −90 to +90 °C; temperature-dependent line broadening resulted from equilibration with ≤1% of an unknown isomer. Among various possible angle-strained rate processes, an inversion transoid19?cisoid20 is preferred which involves a topomerization at the CN bond; lateral inversion and rotation are discussed. At 80 °C in solution, ketene imine 9C slowly suffered fragmentation to give trans- and cis-1,2-bis(trifluoromethyl)cyclopropane-1,2-dicarbonitrile (13)+thioketone 6C by intramolecular substitution. The reaction of 1C with ethenetetracarbonitrile furnished a tetracyanothiolane 3C, whereas 1C and dimethyl 2,3-dicyanofumarate ((E)-26) afforded thiolanes of the same trans,cis-ratio as 1C with dimethyl 2,3-dicyanomaleate ((Z)-26); a preceding (E,Z)-equilibration of 26 thwarts mechanistic conclusions. When the solvent contained water or methanol, short-lived ketene imines 4C and 31 were intercepted.     

Three-component synthesis of 5:6 and 6:6 fused pyrimidines using KF-alumina as a catalyst

A series of fused pyrimidine derivatives were synthesized by the three-component reaction of an aryl aldehyde, urea, or guanidine in ethyl alcohol/dioxane in presence of 1-methyl-1H-pyrrol-2(3H)-one 1, 1-methylpiperidin-2-one 2, 1-methylindolin-2-one 3, or 1,3-dimethyl-dihydropyrimidine-2,4-dione 9 at 80 °C catalyzed by KF-Al₂O₃. For example, when 1-methyl-1H-pyrrol-2(3H)-one 1, arylaldehyde 4, and urea 5 were treated with KF-Al₂O₃ in ethyl alcohol at 80 °C for 3-5 h, we obtained pyrrolo[2,3-d]pyrimidine derivatives in good yield.     

The degradation of 4,5-dichloro-1,2,3-dithiazolium chloride in wet solvents

4,5-Dichloro-1,2,3-dithiazolium chloride 1 (Appel salt) reacts in wet DCM, THF or MeCN to give elemental sulfur, dithiazole-5-thione 4, dithiazol-5-one 5 and thiazol-5-one 6. Furthermore the reaction of 2-phenylthiazol-5(4H)-one 12 with Appel salt 1 at ca. 20 °C gives 4-(4-chloro-5H-1,2,3-dithiazol-5-ylidene)-2-phenylthiazol-5(4H)-one 13 (26%) while at ca. 82 °C a new product 2,2′-diphenyl-4,4′-bithiazol-ylidene-5,5′-dione 14 (36%) is additionally isolated. Finally, 4,4′-bithiazolylidene-5,5′-dione 14 is prepared directly by treating 2-phenylthiazol-5(4H)-one 12 with N-chlorosuccinimide. All new compounds are fully characterised and rational mechanisms are proposed for the formation of all key compounds.     

Highly stereoselective synthesis of perhydropyrano[2,3-b]pyrans from the new 3-methylidenepentane-1,5-dianion synthon

4-Phenylsulfanyl-2-(2-phenylsulfanylethyl)but-1-ene (2) is a new 3-methylidenepentane-1,5-dianion synthon which on reaction with an excess of lithium powder and a catalytic amount of DTBB (2.5%) in the presence of a carbonyl compound in THF at 0 °C, leads, after hydrolysis, to the expected methylidenic diols 3. These diols when subjected to successive hydroboration-oxidation and final oxidation, undergo spontaneous cyclisation to furnish a series of cis-perhydropyrano[2,3-b]pyrans (4) in a highly diastereoselective manner (>99% de). Acid-catalysed isomerisation of the cis-perhydropyrano[2,3-b]pyrans (4) leads, also stereoselectively, to the corresponding trans-perhydropyrano[2,3-b]pyrans (5). A discussion about the stability of 4 and 5 is also included.     

Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Application of chiral tetrahydropentalene ligands in rhodium-catalyzed 1,4-addition of (E)-2-phenylethenyl- and (Z)-propenylboronic acids to enones

Chiral tetrahydropentalenes (3aR,6aR)-1 have been prepared and used as ligands in the Rh-catalyzed 1,4-addition of 1-alkenylboronic acids to cyclic enones 5. It has been discovered that the stereochemistry of the reaction was controlled by the steric properties of the aryl groups in 1 rather than their electronic nature. In the vinylation with (E)-2-phenylethenylboronic acid 5, ligands (3aR,6aR)-1 provided enantioselectivity up to 87% ee and gave high yields of ethenylketones 6 in the presence of 1 (6.6 mol %). The configuration of all ketone products obtained with (3aR,6aR)-1 is (S). Rh-catalyzed reaction of cyclopentenone 4a and (Z)-propenylboronic acid 7 in the presence of ligands (3aR,6aR)-1 yielded at 50 °C an inseparable mixture of (Z)- and (E)-ketones 8 with (Z)-8 as the major product and both in only moderate enantiomeric excess.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Complexation thermodynamics of water-soluble calix[4]arene derivatives with lanthanoid(III) nitrates in acidic aqueous solution

Microcalorimetric titrations have been performed in acidic aqueous solution at 25 °C to calculate the complex stability constants (K_S) and thermodynamic parameters (ΔG°, ΔH°, and TΔS°) for the stoichiometric 1:1 complexation of lanthanoid(III) nitrates (La-Gd, Tb) with 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)calix[4]arene (2) and 5,11,17,23-tetrasulfonato-thiacalix[4]arene (3). Using the present and previous reported data on water-soluble calix[4]arenesulfonates (1) and structurally related analogues 2 and 3, the complexation behavior is discussed comparatively from the thermodynamic point of view. Possessing four carboxyls at the lower rim of parent calix[4]arenesulfonate (1), the derivative 2 displays the enhanced binding abilities for Sm³⁺. As compared with 1 and 2, p-sulfonatothiacalix[4]arene (3) gives not only the lower binding constants for all of lanthanoid(III) ions but also lower cations selectivity. Thermodynamically, the resulting complexes of lanthanoid(III) ions with 1 and its derivatives 2 and 3 is absolutely entropy-driven in aqueous solution, typically showing larger positive entropy changes. These larger positive entropy changes (TΔS°) and somewhat smaller positive enthalpy changes (ΔH°) are directly contributed to the complexes stability as a compensative consequence.     

Silicon-carbon unsaturated compounds. 77. Thermal behavior of cis- and trans-1-silacyclobut-3-ene formed from pivaloyl[tert-butylbis(trimethylsilyl)]silane and tert-butylacetylene

The reaction of tert-butylbis(trimethylsilyl)silyl potassium with pivaloyl chloride gave pivaloyl[tert-butylbis(trimethylsilyl)]silane (1) in 89% yield. The cothermolysis of 1 with tert-butylacetylene at 140 °C for 24 h produced the mixture consisting of cis- and trans-1,2,3-tri(tert-butyl)-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclobut-3-ene (cis-2 and trans-2) in a ratio of 0.7: 1, in 88% combined yield. The thermolysis of the mixture, cis-2 and trans-2, at 250 °C for 24 h proceeded to give trans-1,2,4-tri(tert-butyl)-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclobut-3-ene (4) as a single product in 96% yield. Similar treatment of cis- and trans-2 at 190 °C for 15 h afforded silylcyclopropene 3 quantitatively, which underwent further isomerization at 250 °C to give trans-1-silacyclobut-3-ene 4 in quantitative yield.