Pt and Pt–Ru nanoparticles decorated polypyrrole/multiwalled carbon nanotubes and their catalytic activity towards methanol oxidation

Conducting polymer composite films comprised of polypyrrole (PPy) and multiwalled carbon nanotubes (MWCNTs) [PPy–CNT] were synthesized by in situ polymerization of pyrrole on carbon nanotubes in 0.1 M HCl containing (NH₄)S₂O₈ as oxidizing agent over a temperature range of 0–5 °C. Pt nanoparticles are deposited on PPy–CNT composite films by chemical reduction of H₂PtCl₆ using HCHO as reducing agent at pH = 11 [Pt/PPy–CNT]. The presence of MWCNTs leads to higher activity, which might be due to the increase of electrochemically accessible surface areas, electronic conductivity and easier charge-transfer at polymer/electrolyte interfaces allowing higher dispersion and utilization of the deposited Pt nanoparticles. A comparative investigation was carried out using Pt–Ru nanoparticles decorated PPy–CNT composites. Cyclic voltammetry demonstrated that the synthesized Pt–Ru/PPy–CNT catalysts exhibited higher catalytic activity for methanol oxidation than Pt/PPy–CNT catalyst. Such kinds of Pt and Pt–Ru particles deposited on PPy–CNT composite polymer films exhibit excellent catalytic activity and stability towards methanol oxidation, which indicates that the composite films is more promising support material for fuel cell applications.     

Synthesis of flower-like gold nanoparticles and their electrocatalytic activity towards the oxidation of methanol and the reduction of oxygen

This article describes the synthesis of branched flower-like gold (Au) nanocrystals and their electrocatalytic activity toward the oxidation of methanol and the reduction of oxygen. Gold nanoflowers (GNFs) were obtained by a one-pot synthesis using N-2-hydroxyethylpiperazine-N-2-ethanesulphonic acid (HEPES) as a reducing/stabilizing agent. The GNFs have been characterized by UV-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and electrochemical measurements. The UV-visible spectra show two bands corresponding to the transverse and longitudinal surface plasmon (SP) absorption at 532 and 720 nm, respectively, for the colloidal GNFs. The GNFs were self-assembled on a sol-gel-derived silicate network, which was preassembled on a polycrystalline Au electrode and used for electrocatalytic applications. The GNFs retain their morphology on the silicate network; the UV-visible diffuse reflectance spectra (DRS) of GNFs on the silicate network show longitudinal and transverse bands as in the case of colloidal GNFs. The GNFs show excellent electrocatalytic activity toward the oxidation of methanol and the reduction of oxygen. Oxidation of methanol in alkaline solution was observed at approximately 0.245 V, which is much less positive than that on an unmodified polycrystalline gold electrode. Reduction of oxygen to H2O2 and the further reduction of H2O2 to water in neutral pH were observed at less negative potentials on the GNFs electrode. The electrocatalytic activity of GNFs is significantly higher than that of the spherically shaped citrate-stabilized Au nanoparticles (SGNs).     

Synthesis of poly(N-vinyl-2-pyrrolidone) adsorbed-AuPt/C bimetallic nanoparticles and their unusual electrocatalytic activity towards methanol tolerant oxygen reduction reaction

Journal of Solid State Electrochemistry - It has been suggested that the presence of adsorbed impurities, such as capping agent or organic reaction products adsorbed on the metallic nanoparticles,...     

PtRu nanoparticles supported on 1-aminopyrene-functionalized multiwalled carbon nanotubes and their electrocatalytic activity for methanol oxidation

A new synthesis method for the preparation of high-performance PtRu electrocatalysts on multiwalled carbon nanotubes (MWCNTs) is reported. In this method, bimetallic PtRu electrocatalysts are deposited onto 1-aminopyrene (1-AP)-functionalized MWCNTs by a microwave-assisted polyol process. The noncovalent functionalization of MWCNTs by 1-AP is simple and can be carried out at room temperature without the use of expensive chemicals or corrosive acids, thus preserving the integrity and the electronic structure of MWCNTs. PtRu electrocatalysts on 1-AP-functionalized MWCNTs show much better distribution with no formation of aggregates, higher electrochemically active surface area, and higher electrocatalytic activity for the electrooxidation of methanol in direct methanol fuel cells as compared to that on conventional acid-treated MWCNTs and carbon black supported PtRu electrocatalysts. PtRu electrocatalysts on 1-AP-functionalized MWCNTs also show significantly enhanced stability.     

Preparation of Ru-doped SnO2-supported Pt catalysts and their electrocatalytic properties for methanol oxidation

Ru-doped SnO2 nanoparticles were prepared by chemical precipitation and calcinations at 823 K. Due to high stability in diluted acidic solution, Ru-doped SnO2 nanoparticles were selected as the catalyst support and second catalyst for methanol electrooxidation. The micrograph, elemental composition, and structure of the Ru-doped SnO2 nanoparticles were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction, respectively. The electrocatalytic properties of the Ru-doped SnO2-supported Pt catalyst (Pt/Ru-doped SnO2) for methanol oxidation have been investigated by cyclic voltammetry. Under the same loading mass of Pt, the Pt/Ru-doped SnO2 catalyst shows better electrocatalytic performance than the Pt/SnO2 catalyst and the best atomic ratio of Ru to Sn in Ru-doped SnO2 is 1/75. Additionally, the Pt/Ru-doped SnO2 catalyst possesses good long-term cycle stability.     

Bimetallic Pt-Au nanocatalysts electrochemically deposited on graphene and their electrocatalytic characteristics towards oxygen reduction and methanol oxidation

The burgeoning demand for clean and energy-efficient fuel cell system requires electrocatalysts to deliver greater activity and selectivity. Bimetallic catalysts have proven superior to single metal catalysts in this respect. This work reports the preparation, characterization, and electrocatalytic characteristics of a new bimetallic nanocatalyst. The catalyst, Pt-Au-graphene, was synthesized by electrodeposition of Pt-Au nanostructures on the surface of graphene sheets, and characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray powder diffraction (XRD), and voltammetry. The morphology and composition of the nanocatalyst can be easily controlled by adjusting the molar ratio between Pt and Au precursors. The electrocatalytic characteristics of the nanocatalysts for the oxygen reduction reaction (ORR) and the methanol oxidation reaction (MOR) were systematically investigated by cyclic voltammetry. The Pt-Au-graphene catalysts exhibits higher catalytic activity than Au-graphene and Pt-graphene catalysts for both the ORR and the MOR, and the highest activity is obtained at a Pt/Au molar ratio of 2:1. Moreover, graphene can significantly enhance the long-term stability of the nanocatalyst toward the MOR by effectively removing the accumulated carbonaceous species formed in the oxidation of methanol from the surface of the catalyst. Therefore, this work has demonstrated that a higher performance of ORR and the MOR could be realized at the Pt-Au-graphene electrocatalyst while Pt utilization also could be greatly diminished. This method may open a general approach for the morphology-controlled synthesis of bimetallic Pt-M nanocatalysts, which can be expected to have promising applications in fuel cells.     

Fabrication of ionic liquid-functionalized polypyrrole nanotubes decorated with platinum nanoparticles and their electrocatalytic oxidation of methanol

Polypyrrole nanotubes (PPyNTs)/Pt nanoparticle hybrids were synthesized by using covalently attached imidazolium-type ionic liquids (ILs) as linkers. The resultant Pt/ILs/PPyNTs hybrids exhibited high electrocatalytic activity in electrocatalytic oxidation of methanol.     

In situ synthesis of Pt/carbon nanofiber nanocomposites with enhanced electrocatalytic activity toward methanol oxidation

Pt/carbon nanofiber (Pt/CNF) nanocomposites were facilely synthesized by the reduction of hexachloroplatinic acid (H(2)PtCl(6)) using formic acid (HCOOH) in aqueous solution containing electrospun carbon nanofibers at room temperature. The obtained Pt/CNF nanocomposites were characterized by TEM and EDX. The Pt nanoparticles could in situ grow on the surface of CNFs with small particle size, high loading density, and uniform dispersion by adjusting the concentration of H(2)PtCl(6) precursor. The electrocatalytic activities of the Pt/CNF nanocomposites were also studied. These Pt/CNF nanocomposites exhibited higher electrocatalytic activity toward methanol oxidation reaction compared with commercial E-TEK Pt/C catalyst. The results presented may offer a new approach to facilely synthesize direct methanol fuel cells (DMFCs) catalyst with enhanced electrocatalytic activity and low cost.     

Platinum-modified polyaniline/polysulfone composite film electrodes and their electrocatalytic activity for methanol oxidation

The polyaniline/polysulfone (PAN/PSF) composite films were prepared by electropolymerization, and then platinum was deposited into this composite film to obtain the platinum-modified polyaniline/polysulfone(Pt/PAN/PSF) composite film electrodes. Their component, morphology and structure were characterized by FTIR spectra, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the composite film has a bi-layer structure with asymmetrical pores, and the platinum particles are homogeneously dispersed in the modified film electrodes. The cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the electrochemical properties and the electrocatalytic activity of the modified film electrodes, which show a promotive action for methanol oxidation and the methanol oxidation under a diffusion-controlled process.     

Influence of the metal loading on the electrocatalytic activity of carbon-supported (100) Pt nanoparticles

Journal of Solid State Electrochemistry - The influence of the metal loading (i.e. interparticle distance) of shape-controlled Pt nanoparticles on their electrocatalytic properties is evaluated for...     

Sulfonated poly(ether ether ketone)/poly(vinylpyrrolidone) acid–base polymer blends for direct methanol fuel cell application

Acid–base polymer blends for polymer electrolyte membranes have been prepared by blending sulfonated poly(ether ether ketone) (SPEEK) with poly(vinylpyrrolidone) (PVP) to reduce methanol uptake and to decrease methanol permeability while maintaining high proton conductivity. The acid‐base interaction occurring on the sulfonic acid group and on the tertiary amide group was characterized by FTIR and DMA. As the composition of PVP lowered than 20 wt % in the blends, the acid–base interaction causes great reduction on methanol uptake and the methanol permeability; however, the proton conductivity is still high. In this work, membrane–electrode assemblies (MEAs) have been prepared for direct methanol fuel cell (DMFC) from both blend membrane and Nafion 117. DMFC single cell performance was also evaluated. Results confirmed that SPEEK (with the degree of sulfonation (DS) = 69%) blended with PVP (M_n = 1,300,000) with a ratio of 80/20 (w/w) exhibits higher open‐circuit voltages (OCV) and lower polarization loss than those of Nafion 117. These acid–base blends will be suitable for DMFC application. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 565–572, 2006     

A nanomaterial composed of cobalt nanoparticles, poly(3,4-ethylenedioxythiophene) and graphene with high electrocatalytic activity for nitrite oxidation

We have investigated the oxidative electrochemistry of nitrite on glassy carbon electrodes modified with cobalt nanoparticles, poly(3,4-ethylenedioxythiophene) (PEDOT), and graphene. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The results suggest that this new type of electrode combines the advantages of PEDOT-graphene films and cobalt nanoparticles and exhibits excellent electrocatalytic activity towards the oxidation of nitrite. There is a linear relationship between the peak current and the nitrite concentration in the range from 0.5?μM to 240?μM, and the detection limit is 0.15?μM. The modified electrodes also enable the determination of nitrite at low potentials where the noise level and interferences by other electro-oxidizable compounds are weak.

Controlled deposition of Pt on Au nanorods and their catalytic activity towards formic acid oxidation

Platinum submonolayer decorated gold nanorods with controlled coverage were prepared by the addition of Au nanorods into the growth solution of Pt in the presence of NH₂OH · HCl as the growth agent. The properties of Au nanorods decorated by Pt submonolayer were investigated by various techniques including transimission electron microscopy, X-ray diffraction, and electrochemical methods. The Pt decorated Au nanorods on carbon black showed significantly higher activity on formic acid electrooxidation than the conventional Pt/C catalysts. They showed different reaction path of formic acid electrooxidation by suppressing the formation of poisoning intermediate CO.     

A strategy for the high dispersion of PtRu nanoparticles onto carbon nanotubes and their electrocatalytic oxidation of methanol

Carbon nanotubes (CNTs) were non-covalently functionalized by 1-pyrenecarboxaldehyde (PCA) via π-π stacking interactions. PCA not only acts as the reductant for the deposition of PtRu nanoparticles, but the oxidation product of PCA can also effectively anchor and stabilize the in-situ-produced PtRu?NPs on the surface of CNTs. Transmission electron microscopy demonstrates that PtRu?NPs are uniformly dispersed on the surface of CNTs with small particles sizes of about 1.7 nm. The obtained PtRu-NP/CNT composites have higher electrochemical surface areas, electrocatalytic activities, and better stability towards methanol oxidation compared to PtRu?NPs supported on pristine CNTs.     

Electrochemical impedance analysis of methanol oxidation on carbon nanotube-supported Pt and Pt-Ru nanoparticles

Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are employed to investigate methanol oxidation reactions on single-walled carbon nanotube-supported platinum (Pt) and platinum–ruthenium (Pt-Ru) nanoparticles. EIS and CV measurements show consistent results: Pt catalyst supported on single-walled carbon nanotubes possesses higher catalytic activity for methanol oxidation than that on carbon black. Additionally, semicircles in the second quadrant of the Nyquist diagrams are observed for methanol oxidation on all types of catalytic nanoparticles when applying an electrical potential of 600 mV, which indicates the occurrence of negative resistance during electrocatalytic methanol oxidations. However, all impedance spectra show positive resistance at other electrode potentials (e.g., 300, 400, and 800 mV). Electrocatalytic characteristics of all catalysts are further analyzed by equivalent circuit simulations. We propose that intermediate coverage on the catalyst surface and subsequently the oscillation of nonlinear electrochemical methanol oxidations lead to the occurrence of negative resistance at 600 mV.     

Concave Pt-Cu-Fe ternary nanocubes:One-pot synthesis and their electrocatalytic activity of methanol and formic acid oxidation

Concave nanostructures may be developed to improve the specific mass activity of a catalyst for formic acid and methanol electro-oxidation. In this work, we report the elctrocatalytic oxidation of methanol and formic acid in acid medium over concave Pt-Cu-Fe ternary nanocubes (NCs), obtained by the galvanic exchange of Pt and Fe on Cu NCs. The concave Pt-Cu-Fe NCs exhibited improved electrooxidation performance contrasted to Pt-Cu NCs and purchased commercial Pt/C as demonstrated by their improved durability, lower onset potential, and more preferable anti-poisoning properties. These properties are believed to originate from the tailored concave structure of the catalyst and possible synergetic effects among the components of the Pt-Cu-Fe NCs.     

Transition metal oxides in the electrocatalytic oxidation of methanol and ethanol on noble metal nanoparticles

1. Download : Download high-res image (127KB)
2. Download : Download full-size image

     

Green and facile synthesis of Pt/{PW12-GN} composite film and its electrocatalytic activity for methanol oxidation

In this paper, H₃PW₁₂O₄₀ (PW₁₂)-functionalized graphene nanosheets (PW₁₂-GNs) were prepared using a green and facile method via a UV-irradiated photoreduction process, in which PW₁₂ was directly deposited on the GNs as a reductant and also as an anionic stabilizer. The as-prepared water-dispersive PW₁₂-GN composite is used as matrices for electrodeposition of the interesting orchidlike Pt nanoclusters in situ. The PW₁₂-GN composite was characterized by transmission electron microscopy (TEM) and cyclic voltammetry (CV). It was shown that the electrochemical properties of PW₁₂ were maintained in PW₁₂-GNs. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) confirmed that Pt had been deposited on the PW₁₂-GN composite surface. Field emission scanning electron microscopy (FE-SEM) showed that the interesting orchidlike Pt nanoparticles were uniformly immobilized on the surface of the {PW₁₂-GN} composite film. Cyclic voltammetry and chronoamperometric curves were used to study the electrocatalytic activity of Pt/{PW₁₂-GN} regarding methanol oxidation in 0.5 M H₂SO₄. It is worthy of note that the Pt/{PW₁₂-GN} composite film-modified electrode presents a high catalytic activity (j?=?353 mA mg^?1) and better tolerance of CO towards methanol electrooxidation.     

Pt nanoparticles supported on non-carbon titanium chromium nitride nanotubes with high activity and durability for methanol oxidation reaction

Journal of Solid State Electrochemistry - A hybrid titanium chromium nitride nanotube (Ti0.95Cr0.05N NT) support was prepared by a facile synthesis procedure and further used as support for Pt...     

Highly dispersed MoO(x) on carbon nanotube as support for high performance Pt catalyst towards methanol oxidation

HPMo self-assembly on carbon nanotubes followed by decomposition is used to fabricate highly dispersed MoO(x)/CNTs as a support for high performance of a Pt catalyst towards methanol oxidation.