Self-assembly of phospholipid molecules at a Au(111) electrode surface

We described the first scanning tunneling microscopy study of spreading unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) at a Au(111) electrode surface. At the initial stage of the film formation, the molecular resolution images revealed that DMPC molecules are adsorbed flat with the acyl chains oriented parallel to the surface. The molecules assemble into double rows by aligning the acyl chains in the nearest neighbor direction of the reconstructed Au(111) surface and assuming a 90 +/- 10 degrees angle with respect to line of the molecular row. After approximately 30 min, this film is transformed into a hemimicellar state with long rows characteristic for the formation of hemicylindrical surface micelles. At hydrophilic surfaces such as glass, spreading of vesicles involves adsorption, rupture, and sliding of a single bilayer on a lubricating film of the solvent. We have provided the first evidence that a different mechanism is involved in spreading the vesicles at gold. The molecules released by rupture of vesicles self-assemble into an ordered film, and the assembly is controlled by the chain-substrate interaction.     

Role of eDNA on the adhesion forces between Streptococcus mutans and substratum surfaces: influence of ionic strength and substratum hydrophobicity

The aim of this study was to investigate the role of extracellular DNA (eDNA) on the adhesion strength of Streptococcus mutans LT11 on substrata with different hydrophobicities at high and low ionic strengths. AFM adhesion forces to a hydrophilic and hydrophobic substratum increased with increasing surface-delay times and ionic strength and were stronger on a hydrophobic than on a hydrophilic substratum. The presence of eDNA on the streptococcal cell surface enhanced its adhesion force to a hydrophobic substratum significantly more than to a hydrophilic substratum, especially after bond maturation. Bond maturation on a hydrophilic substratum was accompanied by an increasing number of minor adhesion peaks, indicating the involvement of acid-base interactions, whereas on the hydrophobic substratum surface the number of minor adhesion peaks remained low. More minor adhesion peaks developed on the hydrophilic substratum at low ionic strength than at high ionic strength. The final rupture distance in retraction force-distance curves was independent of ionic strength on a hydrophilic substratum and increased with increasing surface delay time. On the hydrophobic surface, the final rupture distance did not increase with surface delay time but was significantly smaller at low than at high ionic strength. Final rupture distances were different in presence and absence of eDNA, and the lower values of this difference coincided with the decrease in hydrodynamic radius of the streptococci upon increasing ionic strength, measured using dynamic light scattering. AFM also yielded higher values for the ionic strength induced difference in final rupture distance because in AFM rupture is forced, while in dynamic light scattering differences in radius are only induced by ionic strength differences.     

Simulations of lipid vesicle rupture induced by an adjacent supported lipid bilayer patch

Using a simple phenomenological model of a lipid bilayer and a surface, simulations were performed to study the bilayer-induced vesicle rupture probability as a vesicle adsorbs adjacently to a bilayer patch already adsorbed on the surface. The vesicle rupture probability was studied as a function of temperature, vesicle size, and surface-bilayer interaction strength. From the simulation data, estimates of the apparent activation energy for bilayer-induced vesicle rupture were calculated, both for different vesicle sizes and for different surface-bilayer interaction strengths.     

Planar block copolymer membranes by vesicle spreading

An easy route to planar solid-supported polymer membranes by vesicle spreading is described. Pre-organized poly(butadiene)-block-poly(ethylene oxide)(PB-PEO) assemblies were spread on two different supports, i.e. strongly hydrophilic glass surfaces and ultrasmooth gold substrates. Polymer membranes were produced on a hydrophilic support by spreading hydroxyl-functionalized polymer vesicles, while covalently immobilized polymer membranes were obtained by spreading LA-functionalized polymer vesicles on gold substrates. Covalently bound membranes were further incubated with the peptide polymyxin B. Interactions with the polymer membrane were detected by EIS. These systems are of great interest to fundamental membrane science and have potential in technological applications, such as drug screening and (bio)sensing.     

Effect of cholesterol or phospholipids incorporation on vesicle formation of muramyldipeptide derivative B30-MDP

Summary The muramyldipeptide derivative B30-MDP has immunoadjuvant activity and vesicleforming ability in aqueous solutions. To assist in the clinical application of B30-MDP to liposomal vaccine, we investigated the physicochemical properties including membrane fluidity, surface charge and particle size of B30-MDP vesicles containing cholesterol, dipalmitoylphosphatidyl-choline (DPPC) or dipalmitoylphosphatidylglycerol (DPPG).The membrane fluidity of B30-MDP/cholesterol vesicles was slightly influenced by cholesterol concentration and temperature. The membrane fluidity of B30-MDP/phospholipid vesicle was dependent on temperature. ESR spectra clearly showed the good miscibility of cholesterol with B30-MDP and the occurrence of phase separation between B30-MDP and phospholipid.The surface charge and particle size of B30-MDP/cholesterol vesicles were hardly influenced by cholesterol concentration in the membrane because the membrane surface was covered with the hydrophilic region of B30-MDP. The effect of this hydrophilic region of B30-MDP on the surface charge and particle size of B30-MDP/phospholipid vesicle was greater than that of phospholipid.This study showed that the membrane structure of B30-MDP/cholesterol vesicle differed from that of B30-MDP/phospholipid vesicle. Further, the hydrophilic region of B30-MDP is considered to play an important role in the physicochemical properties and formation of the vesicle.     

pH-driven assembly of various supported lipid platforms: a comparative study on silicon oxide and titanium oxide

Supported lipid platforms are versatile cell membrane mimics whose structural properties can be tailored to suit the application of interest. By identifying parameters that control the self-assembly of these platforms, there is potential to develop advanced biomimetic systems that overcome the surface specificity of lipid vesicle interactions under physiological conditions. In this work, we investigated the adsorption kinetics of vesicles onto silicon and titanium oxides as a function of pH. On each substrate, a planar bilayer and a layer of intact vesicles could be self-assembled in a pH-dependent manner, demonstrating the role of surface charge density in the self-assembly process. Under acidic pH conditions where both zwitterionic lipid vesicles and the oxide films possess near-neutral electric surface charges, vesicle rupture could occur, demonstrating that the process is driven by nonelectrostatic interactions. However, we observed that the initial rupturing process is insufficient for propagating bilayer formation. The role of electrostatic interactions for propagating bilayer formation differs for the two substrates; electrostatic attraction between vesicles and the substrate is necessary for complete bilayer formation on titanium oxide but is not necessary on silicon oxide. Conversely, in the high pH regime, repulsive electrostatic interactions can result in the irreversible adsorption of intact vesicles on silicon oxide and even a reversibly adsorbed vesicle layer on titanium oxide. Together, the results show that pH is an effective tool to modulate vesicle-substrate interactions in order to create various self-assembled lipid platforms on hydrophilic substrates.     

Simulations of temperature dependence of the formation of a supported lipid bilayer via vesicle adsorption

Recent experimental investigations of the kinetics of vesicle adsorption in solution on SiO2 demonstrate a thermally activated transition from adsorbed intact vesicles to a supported lipid bilayer. Our Monte Carlo simulations clarify the mechanism of this process. The model employed is an extension of the model used earlier to describe vesicle adsorption at room temperature. Specifically, it includes limitations of the adsorption rate by vesicle diffusion in the solution, and adsorption- and lipid-membrane-induced rupture of arriving and already adsorbed vesicles. Vesicles and lipid molecules, formed after rupture of vesicles, are considered immobile. With these ingredients, the model is able to quantitatively reproduce the temperature-dependent adsorption kinetics, including a higher critical surface concentration of intact vesicles for lower temperatures, and the apparent activation energy for the vesicle-to-bilayer transition E(a) approximately 5 kcal/mol.     

Giant lipid vesicles impaled with glass microelectrodes: GigaOhm seal by membrane spreading

Giant unilamellar lipid vesicles could be perfect systems to study ion channels in the environment of lipid membranes with defined chemical and physical properties. Prerequisite for electrical measurements is an intravesicular electrical contact. We describe the impalement of giant lipid vesicles by glass micropipet electrodes with a tight seal. To avoid displacement or burst during impalement, the vesicles are immobilized in relaxed conditions by microscopic picket fences of polyimide. The outer surface of the pipets is selectively coated with silanes or polylysine. Structurally, the impalement is verified by ejecting a fluorescent solution out of the pipet. For electrical characterization, current pulses are applied to the pipet and voltage transients are recorded. The data are evaluated in terms of the capacitance and effective resistance of the membrane. Directly after impalement, we observe a seal resistance up to 1.2 GOmega that continuously decays within a period of up to 20 min until it suddenly disappears without burst of the vesicle. During impalement, a spreading of the vesicle membrane along the outer surface of the pipets is observed using a fluorescent membrane-bound dye. We assign the tight pipet-vesicle contact to spreading of the lipid bilayer by a rolling mechanism and the loss of resistance to micro- and macropores that are induced by the resulting membrane tension. Limitation of spreading is attempted with barriers on the pipet.     

Spreading of individual toner particles studied using in situ optical microscopy

This study develops and tests an experimental method to monitor in situ the dynamic spreading of individual toner particles on model substrates during heating, to simulate on laboratory scale the fusing sub-processes occurring in electrophotographic printing of paper. Real toner particles of cyan, magenta, yellow and black are transformed to perfect spheres by a temperature pre-treatment, then applied to the substrate, either high-energy clean glass or low-energy hydrophobised glass, and heated at rates up to 50 degrees C/min. The subsequent spreading as a function of time (and temperature) is recorded by an optical microscope and CCD camera mounted above the substrate, with the measured drop covering area used to calculate the corresponding toner-substrate-air contact angle. On the hydrophobic substrate the spreading is limited and equal for all four colours, while the substantially greater spreading on the hydrophilic substrate is accompanied by significant differences between the toner colours. In particular, the cyan and black toners are found to spread to almost twice the extent of the yellow particles. The dynamic spreading behaviour is interpreted in terms of complementary measurements of substrate and toner surface energy components and bulk toner rheology, and a simple empirical relation is proposed that fits very well the measurements for all toner and substrate types tested. In particular, the spreading relation is found to be determined only by the toner surface energy and its equilibrium contact angle, with no explicit dependence on toner viscosity.     

pH-induced release from P2VP-PEO block copolymer vesicles

The pH-induced release of hydrophilic dyes from poly(2-vinylpyridine-b-ethylene oxide) (P2VP-PEO) block copolymer vesicles is investigated. The structure of the vesicles is characterized using small-angle neutron scattering (SANS) and cryo-electron microscopy (cryo-TEM). A decrease of the pH below 5 leads to protonation and dissolution of the poly-2-vinylpyridine blocks which induces rupture and dissolution of the vesicle membrane. Details of the rupture, dissolution, and release process are studied by fluorescence video microscopy, gel electrophoresis, and high-performance ultrafiltration.     

Control of dynamics and molecular distribution in a self-spreading lipid bilayer using surface-modified metal nanoarchitectures

The molecular distribution and spreading dynamics of self-spreading lipid bilayers can be tuned by surface-modified metallic nanoarchitectures. Interactions between lipids and molecules in the surface modification alter the self-spreading behavior at the gate regions between adjacent nanoarchitectures, leading to molecular filtering/concentrating effects and modification of the dynamics. The hydrophilic surface can tune the spreading velocity without changing the molecular distribution in the spreading bilayer, whereas the hydrophobic surface provides a molecular concentrating function to the nanogates. This indicates that a combination of unmodified/hydrophobic/hydrophilic nanoarchitectures has a wide range of potential applications since it can be used to independently control the self-spreading dynamics and the molecular distribution.     

嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.     

Excited Fluorophores Enhance the Opening of Vesicles at Electrode Surfaces in Vesicle Electrochemical Cytometry

Electrochemical cytometry is a method developed recently to determine the content of an individual cell vesicle. The mechanism of vesicle rupture at the electrode surface involves the formation of a pore at the interface between a vesicle and the electrode through electroporation, which leads to the release and oxidation of the vesicle's chemical cargo. We have manipulated the membrane properties using excited fluorophores conjugated to lipids, which appears to make the membrane more susceptible to electroporation. We propose that by having excited fluorophores in close contact with the membrane, membrane lipids (and perhaps proteins) are oxidized upon production of reactive oxygen species, which then leads to changes in membrane properties and the formation of water defects. This is supported by experiments in which the fluorophores were placed on the lipid tail instead of the headgroup, which leads to a more rapid onset of vesicle opening. Additionally, application of DMSO to the vesicles, which increases the membrane area per lipid, and decreasing the membrane thickness result in the same enhancement in vesicle opening, which confirms the mechanism of vesicle opening with excited fluorophores in the membrane. Light‐induced manipulation of membrane vesicle pore opening might be an attractive means of controlling cell activity and exocytosis. Additionally, our data confirm that in experiments in which cells or vesicle membranes are labeled for fluorescence monitoring, the properties of the excited membrane change substantially.     

Lipid bilayer deposition and patterning via air bubble collapse

We report a new method for forming patterned lipid bilayers on solid substrates. In bubble collapse deposition (BCD), an air bubble is first "inked" with a monolayer of phospholipid molecules and then touched to the surface of a thermally oxidized silicon wafer and the air is slowly withdrawn. As the bubble shrinks, the lipid monolayer pressure increases. Once the monolayer exceeds the collapse pressure, it folds back on itself, depositing a stable lipid bilayer on the surface. These bilayer disks have lateral diffusion coefficients consistent with high quality supported bilayers. By sequentially depositing bilayers in overlapping areas, fluid connections between bilayers of different compositions are formed. Performing vesicle rupture on the open substrate surrounding this bilayer patch results in a fluid but spatially isolated bilayer. Very little intermixing was observed between the vesicle rupture and bubble-deposited bilayers.     

Synthesis and vesicular self-assembly of a novel asymmetric cationic and ethoxylated amphiphile

Cationic quaternary ammonium and nonionic oligo(ethylene oxide) are attractive classes of polar units for new amphiphile synthesis. However, they present distinct physical and chemical properties. We combine these two hydrophilic groups to each side of a hydrophobic segment, getting a new asymmetric cationic ethoxylated amphiphile (EO₁₂BphC₁₀NC₁₂). Different from common amphiphiles, EO₁₂BphC₁₀NC₁₂ not only connects different hydrophilic units on both ends of hydrophobic spacers but also integrates the structural characters of bola- and gemini-form amphiphiles together, which brings interesting properties to the new building block. We studied its surface activity and self-assembly behavior in aqueous solution. It turns out that EO₁₂BphC₁₀NC₁₂ can reduce the surface tension of aqueous solution and self-assembly into vesicles above the critical aggregation concentration. More importantly, the strong nuclear Overhauser effect between quaternary ammonium cation and the first oxyethylene group indicates that the two headgroups locate at the vesicle surface together randomly, other than selectively occupy inner or outer vesicle surface. The synergistic effect of molecular size and hydration of different hydrophilic groups leads to the interdigitated packing state of alky chains in the vesicle with symmetric membrane.     

Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

The adhesion kinetics of sticky vesicles in tension: the distinction between spreading and receptor binding

We investigate the kinetics of spreading and adhesion between polymer vesicles decorated with avidin and biotin, held in micropipettes to maintain fixed tension and suppress membrane bending fluctuations. In this study, the density of avidin (actually Neutravidin) and biotin was varied, but was always sufficiently high so that lateral diffusion in the membrane was unimportant to the adhesive mechanism or rate. For a stunning result, we report a concentration-dependent distinction between adhesion and spreading: At low surface densities of avidin and biotin, irreversible vesicle adhesion is strong enough to break the membrane when vesicle separation is attempted, yet there is no spreading or "wetting". By this we mean that there is no development of an adhesion plaque beyond the initial radius of contact and there is no development of a meaningful contact angle. Conversely, at 30% functionalization and greater, membrane adhesion is manifest through a spreading process in which the vesicle held at lower tension partially engulfs the second vesicle, and the adhesion plaque grows, as does the contact angle. Generally, when spreading occurs, it starts abruptly, following a latent contact period whose duration decreases with increasing membrane functionality. A nucleation-type rate law describes the latency period, determined by competition between bending and sticking energy. The significance of this result is that, not only are membrane mechanics important to the development of adhesion in membranes of nanometer-scale thickness, mechanics can dominate and even mask adhesive features such as contact angle. This renders contact angle analyses inappropriate for some systems. The results also suggest that there exist large regions of parameter space where adhesive polymeric vesicles will behave qualitatively differently from their phospholipid counterparts. This motivates different strategies to design polymeric vesicles for applications such as targeted drug delivery and biomimetic scavengers.     

Electroformation of giant phospholipid vesicles on a silicon substrate: advantages of controllable surface properties

We introduce the use of silicon (Si) as a substrate for the electroformation of giant phospholipid vesicles. By taking advantage of the tunability of silicon surface properties, we varied the organization of the phospholipid film on the electrode and studied the consequences on vesicle formation. In particular, we investigated the effects of Si surface chemistry and microtopology on the organization of the phospholipid film and the properties of the final vesicles. We established correlations between chemical homogeneity, film defects, and resulting vesicle size distribution. By considering phospholipid films that are artificially fragmented by electrode microstructures, we showed that the characteristic size of vesicles decreases with a decrease in microstructure dimensions. We finally proposed a way to control the vesicle size distribution by using a micropatterned silicon dioxide layer on a Si substrate.     

A multitechnique study of liposome adsorption on Au and lipid bilayer formation on SiO2

We have used a new setup for parallel quartz crystal microbalance with dissipation (QCM-D) and surface plasmon resonance (SPR) measurements to measure the detailed kinetics of vesicle-to-bilayer transformation on SiO2 and vesicle adsorption on Au, respectively. The combination of SPR and QCM-D, complemented by atomic force microscopy measurements, has enabled a complete, time-resolved separation of vesicle and bilayer coverages, and thus, for the first time, allowed precise quantification of the critical surface coverage of vesicles needed for rupture. We furthermore demonstrate and quantify a previously undetected vesicle-size- and concentration-dependent loss of lipid material during the later stages of the process.     

STABILIZATION OF LIPID BILAYERS ON SURFACES THROUGH CHARGED POLYMERS

ABSTRACT

It is our concept to use a polymer as a hydrophilic cushion to stabilize a lipid bilayer on a solid support. This can be accomplished by using polyacrylamides with disulfides and DMPE anchors as a hydrophilic cushion. These polymers have the additional functionalities to chemisorb on gold surfaces through the disulfides and to bind a lipid bilayer on it through the insertion of the lipid anchors into the lipid bilayer. This paper shows that a polymer with the additional functionality of charged groups increases the attraction of vesicles to form a tethered supported lipid bilayer. By varying the amount of charged groups in the polymer, we are able to control the hydrophilic behavior of the polymer and therefore are able to change the wetting on a surface. This was examined by measuring the contact angles. Using the technique of the surface plasmon spectroscopy, we are able to monitor the process of vesicle fusion on the polymer support.