Challenges in the identification process of phenidate analogues in LC‐ESI‐MS/MS analysis: Information enhancement by derivatization with isobutyl chloroformate

A new analytical technique for the structural elucidation of four representative phenidate analogues possessing a secondary amine residue, which leads to a major/single amine‐representative fragment/product ion at m/z 84 both in their GC‐EI‐MS and LC‐ESI‐MS/MS spectra, making their identification ambiguous, was developed. The method is based on “in vial” chemical derivatization with isobutyl chloroformate in both aqueous and organic solutions, followed by liquid chromatography‐electrospray ionization mass spectrometry (LC‐ESI‐MS/MS). The resulting carbamate derivatives promote rich fragmentation patterns with full coverage of all substructures of the molecule, enabling detailed structural elucidation and unambiguous identification of the original compounds at low ng/mL levels.     

Structural elucidation of V‐type nerve agents by liquid chromatography/electrospray ionization mass spectrometry

V‐nerve agents present information‐poor spectra, both in GC‐EI‐MS and LC‐ESI‐MS/MS, with dominant fragments/product ions corresponding to the amine‐containing residue. Hence, derivatives/isomers with the same amine residue exhibit similar mass spectral patterns, leading to ambiguity in the phosphonate structure. We present a simple approach for their structural elucidation based on two complementary experiments: ESI‐MS/MS of the original compound, which provides information about the amine moiety, and ESI‐MS/MS of the phosphonic acid hydrolysis products generated by N‐iodosuccinimide, which provides ions' characteristic of the phosphonate structure. This approach enables the structural elucidation of the original V‐agents with a higher degree of certainty.     

Lignin: its functions and successive flow

Phenolic lignin-based polymers with structure-variable function have originally been designed, and a process has been developed for synthesizing them directly from native lignins. The key point of the process is to set up two different solvents, which are immiscible each other, for selective modification and separation of lignin and carbohydrates: hydrophobic solvent for hydrophobic lignin and hydrophilic solvent for hydrophilic carbohydrates. The native lignins, three dimensional network polymers, are subjected to selective modifications at the interface between both phases to give linear type polymers (lignophenols) composed mainly of 1,1-bis(aryl)propane type units, almost quantitatively. The process provides a new system for successively utilizing lignocellulosics in the molecular level.     

Identification of phototransformation products of sildenafil (Viagra) and its N‐demethylated human metabolite under simulated sunlight

Recent publications on pharmaceutical monitoring are increasingly covering the field of illicit drugs and lately the forensic evaluation of designing illegal analogs of lifestyle drugs like the phosphodiesterase type 5 (PDE‐5) inhibitors Viagra (sildenafil), Levitra (vardenafil) and Cialis (tadalafil). Recently, the presence of all three erectile dysfunction treatment drugs has been reported in wastewaters at very low concentrations. In the environment, contaminants undergo various physical or chemical processes classified into abiotic (photolysis, hydrolysis) and biotic (biodegradation) reactions. Thus, changes in the chemical structure lead to the formation of new transformation products, which may persist in the environment or be further degraded. This study describes the photolysis of sildenafil (SDF) and its human metabolite N‐demethylsildenafil (DM‐SDF) under simulated solar radiation (Xenon lamp). Following chromatographic separation of the irradiated samples, eight photoproducts in the SDF samples and six photoproducts for DM‐SDF were detected and characterized. The combination of ultra performance liquid chromatography‐electrospray ionization‐quadrupole time‐of‐flight‐mass spectrometry (UPLC‐ESI‐QToF‐MS), liquid chromatography‐atmospheric pressure chemical ionization‐triple quadrupole mass spectrometry (LC‐APCI‐QqQ‐MS) and hydrogen/deuterium‐exchange experiments allowed to propose plausible chemical structures for the photoproducts, taking into account the characteristic fragmentation patterns and the accurate mass measurements. These mass spectral data provided sound evidence for the susceptibility of the piperazine ring toward photodegradation. A gradual breakdown of this heterocyclic structure gave rise to a series of products, which in part were identical for SDF and DM‐SDF. The sulfonic acid, as the formal product of sulfonamide hydrolysis, was identified as key intermediate in the photolysis pathway. In both drug/metabolite molecules, phototransformation processes taking place beyond the sulfonamide group were deemed to be of minor relevance. Copyright © 2012 John Wiley & Sons, Ltd.     

Tandem mass spectrometry of synthetic polymers

The detailed characterization of macromolecules plays an important role for synthetic chemists to define and specify the structure and properties of the successfully synthesized polymers. The search for new characterization techniques for polymers is essential for the continuation of the development of improved synthesis methods. The application of tandem mass spectrometry for the detailed characterization of synthetic polymers using the soft ionization techniques matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) and electrospray ionization mass spectrometry (ESI‐MS), which became the basic tools in proteomics, has greatly been increased in recent years and is summarized in this perspective. Examples of a variety of homopolymers, such as poly(methyl methacrylate), poly(ethylene glycol), as well as copolymers, e.g. copolyesters, are given. The advanced mass spectrometric techniques described in this review will presumably become one of the basic tools in polymer chemistry in the near future. Copyright © 2009 John Wiley & Sons, Ltd.     

Pyrolytic alkylation-gas chromatography-mass spectrometry of model polymers Further insights into the mechanism and scope of the technique

The mechanism of the high-temperature hydrolysis and alkylation with tetraalkylammonium hydroxides of bio- and geopolymers has been approached mainly by studying the behaviour of single standard compounds. In the present work, we have applied this technique to three polymers of known structure, i.e. suberin, polycitraconic acid (PCA) and a lignin dehydrogenase polymer (DHP), related respectively to natural polyesters, fulvic acids and lignins, in order to get new insight into the reaction mechanisms. As further application of the technique, the case study of the lignin signature during the coalification process has been analyzed by pyrolysis-butylation of humic acids extracted from two peat and lignite samples.     

High‐Mass MALDI‐MS Analysis for the Investigation of Protein Encapsulation within an Engineered Capsid Forming Protein

Chemical cross‐linking combined with MALDI ‐MS was applied to structural analysis of a protein nanocontainer. Specifically, an engineered variant of lumazine synthase from Aquifex aeolicus (AaLS ‐13) was investigated that self‐assembles into a capsid‐like structure and is known to encapsulate other proteins by Coulombic attraction. Two complementary soft ionization techniques, MALDI ‐MS and native ESI ‐MS , were utilized to map the subunit stoichiometry of the high molecular weight capsid. In accordance with the previously reported cryo‐electron microscopy structure of this protein container, only pentameric subunits were detected. This study highlights the possibility to map subunit stoichiometry via chemical cross‐linking with glutaraldehyde followed by MALDI ‐MS . The same approach was used to study protein‐protein interactions during encapsulation of GFP (+36) by the AaLS ‐13 capsid. Heterocomplexes between GFP (+36) and AaLS ‐13 multimers were not observed when mixed at maximal loading capacity (AalS‐13 monomer:GFP (+36) 4:1). This is in agreement with the known fast encapsulation of GFP (+36) by the protein capsid, which essentially removes any free GFP (+36) from the solution. Exceeding the maximal loading capacity by addition of excess GFP (+36) results in aggregation.     

A dopant for improved sensitivity in easy ambient sonic‐spray ionization mass spectrometry

Recently, 3‐nitrobenzonitrile (3‐NBN) has been used to improve sensitivity of sonic‐spray ionization mass spectrometry. Easy ambient sonic‐spray ionization (EASI) is one of the simplest, gentlest and most used spray‐based desorption/ionization ambient techniques, but limited sensitivity has been commonly taken as its major drawback. Herein we investigate the use of 3‐NBN as a dopant in EASI‐MS for improved sensitivity. Using a few typical EASI samples as test cases, the presence of 10 ppm (µg ml^?1) of 3‐NBN in the spray solvent showed two to fourfold gains in EASI‐MS sensitivity as measured both by total ion current and S/N ratios, accompanied with significant reductions in chemical noise. Sensitivity for DESI using 3‐NBN as a dopant also improved and dopant DESI versus dopant EASI sensitivities were compared. The use of solvent dopants seems therefore to be a promising strategy to improve sensitivity for spray‐based ambient MS techniques. Copyright © 2015 John Wiley & Sons, Ltd.     

Paving the Way for Lignin Valorisation: Recent Advances in Bioengineering,Biorefining and Catalysis

Lignin is an abundant biopolymer with a high carbon content and high aromaticity. Despite its potential as a raw material for the fuel and chemical industries, lignin remains the most poorly utilised of the lignocellulosic biopolymers. Effective valorisation of lignin requires careful fine‐tuning of multiple “upstream” (i.e., lignin bioengineering, lignin isolation and “early‐stage catalytic conversion of lignin”) and “downstream” (i.e., lignin depolymerisation and upgrading) process stages, demanding input and understanding from a broad array of scientific disciplines. This review provides a “beginning‐to‐end” analysis of the recent advances reported in lignin valorisation. Particular emphasis is placed on the improved understanding of lignin's biosynthesis and structure, differences in structure and chemical bonding between native and technical lignins, emerging catalytic valorisation strategies, and the relationships between lignin structure and catalyst performance.     

Identification and structural characterization by LC‐ESI‐IONTRAP and LC‐ESI‐TOF of some metabolic conjugation products of homovanillic acid in urine of neuroblastoma patients

The levels of urinary catecholamine metabolites, such as homovanillic acid (HVA) and vanillylmandelic acid, are routinely used as a clinical tool in the diagnosis and follow‐up of neuroblastoma (NB) patients. Recently, in the Clinical Pathology Laboratory Unit of G. Gaslini Children Hospital, a commercial method that employs liquid chromatography coupled to electrochemical detection (LC‐EC) has been introduced for the measurement of these metabolites in the routine laboratory practice. Using this LC‐EC method, an unknown peak could be observed only in samples derived from NB patients. To investigate the nature of this peak, we used a combination of liquid chromatography‐time‐of‐flight mass spectrometry (LC‐TOF‐MS) and liquid chromatography‐ion trap tandem mass spectrometry (LC‐IT‐MS). The first approach was used to obtain the elemental composition of the ions present in this new signal. To get additional structural information useful for the elucidation of unknown compounds, the ion trap analyzer was exploited. We were able to identify not just one, but three unknown signals in urine samples from NB patients which corresponded to three conjugated products of HVA: HVA sulfate and two glucuronoconjugate isomers. The enzymatic hydrolysis with β‐glucuronidase confirmed the proposed structures, while the selective alkaline hydrolysis allowed us to distinguish the difference between phenol‐ and acyl‐glucuronide of HVA. The latter was the unknown peak observed in LC‐EC separations of urine samples from NB patients. Copyright © 2012 John Wiley & Sons, Ltd.     

Structural features and thermal degradation properties of various lignin macromolecules obtained from poplar wood (Populus albaglandulosa)

Four different lignins obtained from poplar wood (milled wood lignin: ML, organosolv lignin: OL, ionic liquid lignin: IL and Klason lignin: KL) were subjected to several types of chemical/thermal analyses to compare their structural features and thermal decomposition properties. The ML, OL, IL and KL yield from poplar wood was 5.5, 3.9, 5.8, 19.5 wt%, respectively. Functional group analysis revealed that during the OL and KL extraction processes, the condensation reaction involved with phenolic hydroxyl groups of lignins significantly prevailed, which led to a highly condensed OL and KL structure. Thermogravimetric analysis (TGA) results showed that OL and KL thermal stability was much higher than that of ML and IL. The derivatization followed by reductive cleavage (DFRC) data showed that the thermal stability was highly associated with the frequency of arylglycerol-β-aryl ether (β-O-4) linkages in the lignin polymers. Pyrolysis-GC/MS (Py-GC/MS) analysis confirmed that acetic acid and several types of phenolic compounds were the main lignin pyrolysis products. The maximum sum of ML (13.8 wt%), OL (9.9 wt%) and IL (11.8 wt%) pyrolysis products was obtained at the pyrolysis temperature of 600 °C, whereas KL (1.6 wt%) was significantly lower due to its high thermal stability and condensation degree. The S- and G-type pyrolysis products (S/G) ratio varied from 1.61 to 1.93 for ML, 2.28 to 5.28 for OL, 2.06 to 2.86 for IL and 1.40 to 2.20 for KL, depending on the pyrolysis temperature, which ranged between 400 °C and 700 °C.     

新型除草剂及其杂质的LC-MS和GC-MS分析

High performance liquid chromatography (HPLC) and electrospray ionization mass spectrometry (ESI-MS) have been utilized to analyze the synthesized 2-(2-arylaminomethylphenoxy)pyrimidine derivatives, which are a new kind of environmentally benign herbicides and have passed the temporary pesticide registration. The identification of main product and impurities has been achieved according to the UV and mass spectra. Moreover, one impurity, introduced by the raw material in the last step of the synthetic route, was identified by GC-MS analysis. It can be concluded that the combination of chromatography and mass spectrometry, including LC-MS and GC-MS, provided a vital tool of the pesticide science.     

Endoxylanase action towards the improvement of recycled fibre properties

The nature of recycled paper fibres varies widely. Those fibres contain high amounts of heteroxylans and lignin besides cellulose. In order to study the potential effect of xylanases on the quality of recycled fibres, chemithermomechanical pulp fibres (CTMP) are used as model substrates owing to their high content in non-cellulosic components. It has been found that the morphology of CTMP fibres changes by means of xylanase treatment. Treatments of CTMP fibres with an endoxylanase result in an improved surface area of the fibres by fibrillation, without shortening the fibres. The chemical composition of the surfaces of the fibres changes and an augment in surface hydrophilicity as a result of the removal of lignin and extractives associated to the xylan backbones is observed. Experimental results are in agreement with the findings when studying the chemical composition of the fibres’ surfaces: the xylan backbone is removed by the action of the endoxylanase, resulting in fibre fibrillation; further hydrolysis of released xylan chains proceeds in the bulk down to the monomer xylose.     

Effects of lignin on the ionic-liquid assisted catalytic hydrolysis of cellulose: chemical inhibition by lignin

The production of cellulose-derived biofuels and biochemicals, such as bioalcohols and bioplastics, from lignocellulose requires the isolation of cellulose by lignin removal or delignification processes. While the remaining lignin and its phenolic fragments have been reported to inhibit the biological conversion of cellulose, we observed that the catalytic hydrolysis of cellulose also can be inhibited most likely because of an associative interaction between cellulose and lignin. The associative interaction between cellulose and the functional groups of lignin was proven by gel-permeation-chromatography measurement of regenerated mixtures of lignin and cellulose which simulate the lignocellulose-derived cellulose containing lignin as an impurity. Chemical bonds between cellulose and lignin were hypothesized using lignin model compounds containing known functionalities such as hydroxyl, methoxy, phenyl, allyl, and carboxyl groups in order to explain the effects of lignin on the hydrolysis of cellulose. The yield of glucose from cellulose dropped when carboxylic and hydroxyl groups were present possibly because of the formation of ether and ester bonds between the lignin and cellulose. These observations may help develop the chemical processes and therefore convert the inedible biomass resource of lignocellulose-based cellulose containing lignin and its derivatives to the valuable fuels and chemicals.     

Ionic Liquid Lignosulfonate: Dispersant and Binder for Preparation of Biocomposite Materials

Ionic liquid lignins are prepared from sodium lignosulfonate by a cation exchange reaction and display glass transition temperatures as low as ?13 °C. Diethyleneglycol‐functionalized protic cations inhibit lignin aggregation to produce a free‐flowing “ionic liquid lignin”, despite it being a high‐molecular‐weight polyelectrolyte. Through this approach, the properties of both lignin and ionic liquids are combined to create a dispersant and binder for cellulose+gluten mixtures to produce small microphases. Biocomposite testing pieces are produced by hot‐pressing this mixture, yielding a material with fewer defects and improved toughness in comparison to other lignins. The use of unmodified lignosulfonate, acetylated lignosulfonate, or free ionic liquid for similar materials production yields poorer substances because of their inability to maximize interfacial contact and complexation with cellulose and proteins.     

Identification of carbonylation sites in apomyoglobin after exposure to 4‐hydroxy‐2‐nonenal by solid‐phase enrichment and liquid chromatography–electrospray ionization tandem mass spectrometry

Identification of protein carbonylation because of covalent attachment of a lipid peroxidation end‐product was performed by combining proteolytic digestion followed by solid‐phase hydrazide enrichment and liquid chromatography (LC)–electrospray ionization (ESI) tandem mass spectrometry (MS/MS) using both collision‐induced dissociation (CID) and electron capture dissociation (ECD). To evaluate this approach, we selected apomyoglobin and 4‐hydroxy‐2‐nonenal (4‐HNE) as a model protein and a representative end‐product of lipid peroxidation, respectively. Although the characteristic elimination of 4‐HNE (156 Da) in CID was found to serve as a signature tag for the modified peptides, generation of nearly complete fragment ion series because of efficient peptide backbone cleavage (in most cases over 75%) and the capability to retain the labile 4‐HNE moiety of the tryptic peptides significantly aided the elucidation of primary structural information and assignment of exact carbonylation sites in the protein, when ECD was employed. We have concluded that solid‐phase enrichment with both CID‐ and ECD‐MS/MS are advantageous during an in‐depth interrogation and unequivocal localization of 4‐HNE‐induced carbonylation of apomyoglobin that occurs via Michael addition to its histidine residues. Copyright © 2010 John Wiley & Sons, Ltd.     

Efficient approach for the detection and identification of new androgenic metabolites by applying SRM GC‐CI‐MS/MS: a methandienone case study

Identification of anabolic androgenic steroids (AAS) is a vital issue in doping control and toxicology, and searching for metabolites with longer detection times remains an important task. Recently, a gas chromatography chemical ionization triple quadrupole mass spectrometry (GC‐CI‐MS/MS) method was introduced, and CI, in comparison with electron ionization (EI), proved to be capable of increasing the sensitivity significantly. In addition, correlations between AAS structure and fragmentation behavior could be revealed. This enables the search for previously unknown but expected metabolites by selection of their predicted transitions. The combination of both factors allows the setup of an efficient approach to search for new metabolites. The approach uses selected reaction monitoring which is inherently more sensitive than full scan or precursor ion scan. Additionally, structural information obtained from the structure specific CI fragmentation pattern facilitates metabolite identification. The procedure was demonstrated by a methandienone case study. Its metabolites have been studied extensively in the past, and this allowed an adequate evaluation of the efficiency of the approach. Thirty three metabolites were detected, including all relevant previously discovered metabolites. In our study, the previously reported long‐term metabolite (18‐nor‐17β‐hydroxymethyl,17α‐methyl‐androst‐1,4,13‐trien‐3‐one) could be detected up to 26 days by using GC‐CI‐MS/MS. The study proves the validity of the approach to search for metabolites of new synthetic AAS and new long‐term metabolites of less studied AAS and illustrates the increase in sensitivity by using CI. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of peptide acetylation and dimethylation on electrospray ionization efficiency

Peptide acetylation and dimethylation have been widely used to derivatize primary amino groups (peptide N‐termini and the ε‐amino group of lysines) for chemical isotope labeling of quantitative proteomics or for affinity tag labeling for selection and enrichment of labeled peptides. However, peptide acetylation results in signal suppression during electrospray ionization (ESI) due to charge neutralization. In contrast, dimethylated peptides show increased ionization efficiency after derivatization, since dimethylation increases hydrophobicity and maintains a positive charge on the peptide under common LC conditions. In this study, we quantitatively compared the ESI efficiencies of acetylated and dimethylated model peptides and tryptic peptides of BSA. Dimethylated peptides showed higher ionization efficiency than acetylated peptides for both model peptides and tryptic BSA peptides. At the proteome level, peptide dimethylation led to better protein identification than peptide acetylation when tryptic peptides of mouse brain lysate were analyzed with LC‐ESI‐MS/MS. These results demonstrate that dimethylation of tryptic peptides enhanced ESI efficiency and provided up to two‐fold improved protein identification sensitivity in comparison with acetylation. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization of linear and cyclic polylactic acids and their solvolysis products by electrospray ionization mass spectrometry

Linear and cyclic polylactic acids (PLAs) were characterized using electrospray ionization mass spectrometry (ESI-MS) as part of our ongoing investigation of the hydrolysis mechanism of biodegradable polymers. The condensation oligomers of linear polylactic acid (LPLA) were synthesized by thermal dehydration of L-lactic acid. The trimer and tetramer base polymers of cyclic polylactic acid (CPLA) were obtained by cyclization reactions of lactic acid trimers and tetramers, respectively. In the ESI-MS/MS measurement, LPLA yielded three types of product ion series, while CPLA yielded only one type, from which the repeated units of CPLA were removed. The MS/MS spectrum of the NH4+ adduct ion for both cyclic and linear PLA showed loss of one ammonia molecule. The postsource decay (PSD) spectrum of CPLA by matrix-assisted laser desorption ionization (MALDI) mass spectrometry was similar to the ESI-MS/MS spectrum, while that of LPLA was different. In addition, the degradation of cyclic and linear PLAs by solvolysis was investigated. Solvolysis with anhydrous MeOH was quite feasible, but did not readily occur in the presence of even a small amount of water in the MeOH solvent.