Functional bionetworks from nanoliter water droplets

We form networks from aqueous droplets by submerging them in an oil/lipid mixture. When the droplets are joined together, the lipid monolayers surrounding them combine at the interface to form a robust lipid bilayer. Various protein channels and pores can incorporate into the droplet-interface bilayer (DIB), and the application of a potential with electrodes embedded within the droplets allows ionic currents to be driven across the interface and measured. By joining droplets in linear or branched geometries, functional bionetworks can be created. Although the interfaces between neighboring droplets comprise only single lipid bilayers, the structures of the networks are long-lived and robust. Indeed, a single droplet can be "surgically" excised from a network and replaced with a new droplet without rupturing adjacent DIBs. Networks of droplets can be powered with internal "biobatteries" that use ion gradients or the light-driven proton pump bacteriorhodopsin. Besides their interest as coupled protocells, the droplets can be used as devices for ultrastable bilayer recording with greatly reduced electrolyte volume, which will permit their use in rapid screening applications.     

Asymmetric droplet interface bilayers

In cell membranes, the lipid compositions of the inner and outer leaflets differ. Therefore, a robust model system that enables single-channel electrical recording with asymmetric bilayers would be very useful. We and others recently developed the droplet interface bilayer (DIB), which is formed by connecting lipid monolayer-encased aqueous droplets submerged in an oil-lipid mixture. Here, we incorporate lipid vesicles of different compositions into aqueous droplets and immerse them in an oil bath to form asymmetric DIBs (a-DIBs). Both alpha-helical and beta-barrel membrane proteins insert readily into a-DIBs, and their activity can be measured by single-channel electrical recording. We show that the gating behavior of outer membrane protein G (OmpG) from Escherichia coli differs depending on the side of insertion in an asymmetric DIB with a positively charged leaflet opposing a negatively charged leaflet. The a-DIB system provides a general platform for studying the effects of bilayer leaflet composition on the behavior of ion channels and pores.     

Electrical behavior of droplet interface bilayer networks: experimental analysis and modeling

Aqueous droplets submerged in an oil-lipid mixture become enclosed by a lipid monolayer. The droplets can be connected to form robust networks of droplet interface bilayers (DIBs) with functions such as a biobattery and a light sensor. Such DIB networks might be used as model systems for the study of membrane-based biological phenomena. In this study, we develop and experimentally validate an electrical modeling approach for DIB networks by applying it to describe the current flow through a simple network containing protein pores and blocking molecules. We demonstrate the use of SPICE (Simulation Program with Integrated Circuit Emphasis) for simulating the electrical behavior of DIB networks. The modular and scalable nature of DIB networks should enable a straightforward extension of the analysis presented in this paper to large, complex networks.     

Direct quantitation of peptide-mediated protein transport across a droplet-interface bilayer

We introduce a new method for monitoring and quantitating the transport of materials across a model cell membrane. As a proof-of-concept, the cell-penetrating peptide, Pep-1, was used to carry horseradish peroxidase (HRP) across droplet-interface bilayers (DIBs). Two submicroliter, lipid-encased aqueous droplets form a membrane at the contacting interface, through which enzyme-peptide complexes pass during transport. Following transport, the droplets are separated and the captured enzymes are assayed by a fluorogenic reaction. The DIB method recapitulates the findings of earlier studies involving Pep-1, including the dependence of protein transport on voltage and membrane charge, while also contributing new insights. Specifically, we found that leaflet charge symmetry may play a role in Pep-1-mediated protein translocation. We anticipate that the DIB method may be useful for a variety of transport-based studies.     

Mechanism of freezing of water in contact with mesoporous silicas MCM-41, SBA-15 and SBA-16: role of boundary water of pore outlets in freezing

The freezing mechanism of water contacted with mesoporous silicas with uniform pore shapes, both cylindrical and cagelike, was studied by thermodynamic and structural analyses with differential scanning calorimetry (DSC) and X-ray diffraction (XRD) together with adsorption measurements. In the DSC data extra exothermic peaks were found at around 230 K for water confined in SBA-15, in addition to that due to the freezing of pore water. These peaks are most likely to be ascribed to the freezing of water present over the micropore and/or mesopore outlets of coronas in SBA-15. Freezing of water confined in SBA-16 was systematically analysed by DSC with changing the pore size. The freezing temperature was found to be around 232 K, close to the homogeneous nucleation temperature of bulk water, independent of the pore size when the pore diameter (d) < 7.0 nm. Water confined in the cagelike pores of SBA-16 is probably surrounded by a water layer (boundary water) at the outlets of channels to interconnect the pores and of fine corona-like pores, which is similar to that present at the outlet of cylindrical pores in MCM-41 and of cylindrical channels in SBA-15. The presence of the boundary water would be a key for water in SBA-16 to freeze at the homogeneous nucleation temperature. This phenomenon is similar to those well known for water droplets in oil and water droplets of clouds in the sky. The XRD data showed that the cubic ice I(c) was formed in SBA-16 as previously found in SBA-15 when d < 8.0 nm.     

Fusion and sorting of two parallel trains of droplets using a railroad-like channel network and guiding tracks

We propose a robust droplet fusion and sorting method for two parallel trains of droplets that is relatively insensitive to frequency and phase mismatch. Conventional methods of droplet fusion require an extremely precise control of aqueous/oil flows for perfect frequency matching between two trains of droplets. In this work, by combining our previous two methods (i.e., droplet synchronization using railroad-like channels and manipulation of shape-dependent droplets using guiding tracks), we realized an error-free droplet fusion/sorting device for the two parallel trains of droplets. If droplet pairs are synchronized through a railroad-like channel, they are electrically fused and the fused droplets transit to a middle guiding track to flow in a middle channel; otherwise non-synchronized non-fused droplets will be discarded into the side waste channels by flowing through their own guiding tracks. The simple droplet synchronization, fusion, and sorting technology will have widespread application in droplet-based chemical or biological experiments, where two trains of the chemically or biologically treated or pre-formed droplets yield a train of 100% one-to-one fused droplets at the desired outlet channel by sorting all the non-synchronized non-fused droplets into waste outlets.     

A Bipolar and Self‐Polymerized Phthalocyanine Complex for Fast and Tunable Energy Storage in Dual‐Ion Batteries

Bipolar redox organics have attracted interest as electrode materials for energy storage owing to their flexibility, sustainability and environmental friendliness. However, an understanding of their application in all‐organic batteries, let alone dual‐ion batteries (DIBs), is in its infancy. Herein, we propose a strategy to screen a variety of phthalocyanine‐based bipolar organics. The self‐polymerizable bipolar Cu tetraaminephthalocyanine (CuTAPc) shows multifunctional applications in various energy storage systems, including lithium‐based DIBs using CuTAPc as the cathode material, graphite‐based DIBs using CuTAPc as the anode material and symmetric DIBs using CuTAPc as both the cathode and anode materials. Notably, in lithium‐based DIBs, the use of CuTAPc as the cathode material results in a high discharge capacity of 236 mAh g^?1 at 50 mA g^?1 and a high reversible capacity of 74.3 mAh g^?1 after 4000 cycles at 4 A g^?1. Most importantly, a high energy density of 239 Wh kg^?1 and power density of 11.5 kW kg^?1 can be obtained in all‐organic symmetric DIBs.     

Parallel synchronization of two trains of droplets using a railroad-like channel network

We present a simple method of water-in-oil droplet synchronization in a railroad-like channel network. The network consisted of a top channel, a bottom channel, and ladder-like channels interconnected between the two main channels. The presence of the pressure difference between the top and bottom channels resulted in the crossflow of carrier oil through the ladder network until the pressure in each channel was balanced automatically. The proposed model and method proved the feasibility of the parallel synchronization of two trains of droplets with up to 95% synchronization efficiency. Physical parameters that could improve the efficiency were investigated with the systematic variation of the droplet length and droplet generation frequency by controlling the flow rate in each channel. Under a subtle difference in the generation frequency, an unmatched droplet sandwiched between two matched droplets in the ladder network was switched and synchronized in turn. For perfect one-to-one droplet synchronization, the droplet length and the droplet generation frequency needed to be the same for both the top and bottom channels. In addition, one-to-multiple droplet synchronization was demonstrated by matching the product of the droplet length and the droplet generation frequency for both the top and bottom channels. The proposed method provides a simple unit operation for parallel synchronization of the trains of droplets that can be easily integrated with the conventional continuous-flow droplet-based microfluidic platform.     

Running droplets in a random medium

We consider droplets of radius R injected in a porous medium with a pore size d Ř. The droplets react chemically with the surface of the pores, and make it less wettable. They should acquire a velocity V which is, in most cases, independent of R. For R ~ d, we expect the trajectory to be a random walk. For R > > d, however, it should be ballistic. These effects should be visible when gravity effects are negligible: either by using very small pores (d < d^* ~10μm), or saturating the porous medium with a passive fluid of matched density. Various transport problems associated with this process are discussed here at the level of scaling laws.     

Design of microfluidic channel geometries for the control of droplet volume, chemical concentration, and sorting

Passive microfluidic channel geometries for control of droplet fission, fusion and sorting are designed, fabricated, and tested. In droplet fission, the inlet width of the bifurcating junction is used to control the range of breakable droplet sizes and the relative resistances of the daughter channels were used to control the volume of the daughter droplets. Droplet fission is shown to produce concentration differences in the daughter droplets generated from a primary drop with an incompletely mixed chemical gradient, and for droplets in each of the bifurcated channels, droplets were found to be monodispersed with a less than 2% variation in size. Droplet fusion is demonstrated using a flow rectifying design that can fuse multiple droplets of same or different sizes generated at various frequencies. Droplet sorting is achieved using a bifurcating flow design that allows droplets to be separated base on their sizes by controlling the widths of the daughter channels. Using this sorting design, submicron satellite droplets are separated from the larger droplets.     

聚丁二烯有序多孔膜在热缩型聚乙烯膜上的收缩

采用溶剂散逸自组装制备了聚丁二烯(PB)有序多孔膜。水珠能在冷的高分子溶液表面凝结形成有序的阵列,溶剂蒸发后,高分子材料按照水珠排列的形貌形成了有序多孔膜。两性共聚物的加入能够起到稳定水滴的作用,从而确保多孔膜成为有序的结构。利用聚乙烯可收缩膜将聚丁二烯多孔膜收缩2次,得到长方形、梭形、条形和哑铃形的孔。孔的尺寸从微米级收缩至亚微米级,并对产生各种形状的机理进行了研究。     

Wetting for self-healing and electrowetting for additive manufacturing

Advanced additive manufacturing actively widens its tool box of wettability-related phenomena to be used in production of new items. Novel self-healing engineering materials incorporate vascular networks with two types of nanochannels: the one containing a resin monomer, whereas another one — a curing agent. If such nanocomposites are damaged locally, both types of channels are locally broken, and they release resin monomer and curing agent droplets. These droplets spread by wettability over the nanotextured matrix, touch each other, and coalesce, which triggers polymerization reaction and crack stitching. Wettability-facilitated droplet spreading is accompanied by liquid imbibition in the pores in the nanofiber network. Such process peculiarities are in focus in the present review. An additional process relevant in direct writing and 3D printing is electrowetting (EW). It stems from the change in the contact angle in response to the electric polarization of dielectric substrates. EW allows movement of droplets on horizontal, vertical, and inverse surfaces, which can significantly facilitate the existing direct writing and 3D printing technologies. Accordingly, EW is also in focus in the present review.     

Highly Concentrated Electrolyte towards Enhanced Energy Density and Cycling Life of Dual-Ion Battery

Dual-ion batteries (DIBs) have attracted much attention owing to their low cost, high voltage, and environmental friendliness. As the source of active ions during the charging/discharging process, the electrolyte plays a critical role in the performance of DIBs, including capacity, energy density, and cycling life. However, most used electrolyte systems based on the LiPF₆ salt demonstrate unsatisfactory performance in DIBs. We have successfully developed a 7.5 mol kg⁻¹ lithium bis(fluorosulfonyl)imide (LiFSI) in a carbonate electrolyte system. Compared with diluted electrolytes, this highly concentrated electrolyte exhibits several advantages: 1) enhanced intercalation capacity and cycling stability of the graphite cathode, 2) optimized structural stability of the Al anode, and 3) significantly increased battery energy density. A proof-of-concept DIB based on this concentrated electrolyte exhibits a discharge capacity of 94.0 mAh g⁻¹ at 200 mA g⁻¹ and 96.8 % capacity retention after 500 cycles. By counting both the electrode materials and electrolyte, the energy density of this DIB reaches up to ≈180 Wh kg⁻¹, which is among the best performances of DIBs reported to date.     

High-volume production of single and compound emulsions in a microfluidic parallelization arrangement coupled with coaxial annular world-to-chip interfaces

This study describes a microfluidic platform with coaxial annular world-to-chip interfaces for high-throughput production of single and compound emulsion droplets, having controlled sizes and internal compositions. The production module consists of two distinct elements: a planar square chip on which many copies of a microfluidic droplet generator (MFDG) are arranged circularly, and a cubic supporting module with coaxial annular channels for supplying fluids evenly to the inlets of the mounted chip, assembled from blocks with cylinders and holes. Three-dimensional flow was simulated to evaluate the distribution of flow velocity in the coaxial multiple annular channels. By coupling a 1.5 cm × 1.5 cm microfluidic chip with parallelized 144 MFDGs and a supporting module with two annular channels, for example, we could produce simple oil-in-water (O/W) emulsion droplets having a mean diameter of 90.7 μm and a coefficient of variation (CV) of 2.2% at a throughput of 180.0 mL h(-1). Furthermore, we successfully demonstrated high-throughput production of Janus droplets, double emulsions and triple emulsions, by coupling 1.5 cm × 1.5 cm - 4.5 cm × 4.5 cm microfluidic chips with parallelized 32-128 MFDGs of various geometries and supporting modules with 3-4 annular channels.     

Large Interlayer Distance and Heteroatom-Doping of Graphite Provide New Insights into the Dual-Ion Storage Mechanism in Dual-Carbon Batteries

Dual-ion batteries (DIBs) is a promising technology for large-scale energy storage. However, it is still questionable how material structures affect the anion storage behavior. In this paper, we synthesis graphite with an ultra-large interlayer distance and heteroatomic doping to systematically investigate the combined effects on DIBs. The large interlayer distance of 0.51 nm provides more space for anion storage, while the doping of the heteroatoms reduces the energy barriers for anion intercalation and migration and enhances rapid ionic storage at interfaces simultaneously. Based on the synergistic effects, the DIBs composed of carbon cathode and lithium anode afford ultra-high capacity of 240 mAh g⁻¹ at current density of 100 mA g⁻¹. Dual-carbon batteries (DCBs) using the graphite as both of cathode and anode steadily cycle 2400 times at current density of 1 A g⁻¹. Hence, this work provides a reference to the strategy of material designs of DIBs and DCBs.     

Sodium-based dual-ion batteries via coupling high-capacity selenium/graphene anode with high-voltage graphite cathode

Dual ion batteries (DIBs) exhibit broad application prospects in the field of electrical energy storage (EES) devices with excellent properties, such as high voltage, high energy density, and low cost. In the graphite-based DIBs, high voltage is needed to store enough anions with the formation of anion intercalation compound XC_n (X = AlCl₄^-, PF₆^-, TFSI^-, etc.). Hence, it is difficult for graphite-based DIBs to match proper anodes and electrolytes. Here, an Se/graphene composite is prepared via a convenient method, and assembled into a dual-ion full battery (DIFB) as anode with graphite cathode and 1 mol/L NaPF₆ in EC:EMC (1:1, v:v). This DIFB has achieved a high discharge capacity of 75.9 mAh/g and high medium output voltage of 3.5 V at 0.1 A/g. Actually, the suitable anode materials, such as the present Se/graphene composite, are extremely important for the development and application of graphite-based DIBs. This study is enlightening for the design of future low-cost EES devices including graphite-based DIBs.     

Controlled generation of monodisperse discoid droplets using microchannel arrays

We report a novel technique for generating geometrically confined droplets using a unique microstructure composed of a microchannel (MC) array and a shallow well. Silicon MC array devices were successfully used to generate monodisperse discoid droplets of oil-in-water (O/W) and W/O types by forcing a to-be-dispersed phase through channels into a well filled with a continuous phase. Monodisperse discoid droplets with sizes down to several micrometers were obtained by controlling the channel and well dimensions. The resultant discoid droplets formed a mostly close-packed array in the well. Monodisperse discoid droplets consisting of a silicone oil/water/sodium dodecyl sulfate system did not coalesce during the storage time of seven days. Additionally, MC array plates with many channels can be useful for increasing the droplet productivity of a single microfluidic device.     

Synthesis of spherical polymer and titania photonic crystallites

The fabrication of small structured spherical particles that are essentially small photonic crystals is described. The particles are 1-50 microm in diameter and are porous with nearly close-packed monodisperse pores whose size is comparable to the wavelength of light. The solid matrix of the particles is titania, which provides a large refractive index contrast between the particle matrix and pores. The particles are made by encapsulating polymer colloidal particles in emulsion droplets of hexanes in which a titanium alkoxide precursor is dissolved. Subsequent osmotic removal of the hexanes from the droplets and condensation of the alkoxide precursor leads to spherical aggregates of polymer spheres with titania filling the spaces between the polymer spheres. The polymer particles are then burned out leaving behind the desired porous titania particles. The size and structure of the pores and high refractive index of the titania matrix are expected to produce particles that are very efficient scatterers of light, making them useful as pigments.     

Towards a comprehensive electronic database of polycyclic aromatic hydrocarbons and its application in constraining the identities of possible carriers of the diffuse interstellar bands

A theoretical approach is developed to pre-select individual polycyclic aromatic hydrocarbons (PAHs) as possible carriers of the diffuse interstellar bands (DIBs). In this approach, a computer program is used to enumerate all PAH molecules with up to a specific number of fused benzene rings. Fast quantum chemical calculations are then employed to calculate the electronic transition energies, oscillator strengths, and rotational constants of these molecules. An electronic database of all PAHs with up to any specific number of benzene rings can be constructed this way. Comparison of the electronic transition energies, oscillator strengths, and rotational band contours of all PAHs in the database with astronomical spectra allows one to constrain the identities of individual PAHs as possible carriers of some of the intense narrow DIBs. Using the current database containing up to 10 benzene rings we have pre-selected 8 closed-shell PAHs as possible carriers of the famous lambda6614 DIB.     

Hydrodynamic control of droplet division in bifurcating microchannel and its application to particle synthesis

We describe herein a microfluidic system for active and precise control of droplet division at a bifurcation point in a microchannel. Water-in-oil or oil-in-water droplets, which were initially formed at a T-junction, were introduced into the bifurcation point, and then divided into two daughter droplets. By continuously introducing 'tuning flow' into the downstream of one of the branch channels, and by controlling the flow rates distributed into the two branch channels, the sizes of the daughter droplets could be precisely tuned. The ratio of the volumetric flow rates into the branch channels was estimated by regarding the microchannel network as a resistive circuit. In addition, we performed synthesis of monodispersed polymer particles with controlled sizes utilizing the presented system. The ability to hydrodynamically control the droplet sizes will open new possibilities not only for producing useful emulsions, but also for conducting controlled chemical and biochemical reactions in a confined space.